SUZUKI GRAND VITARA MODIFICATIONS

Рет қаралды 28,787

4 ай бұрын

👇 MORE INFORMATION ABOUT THE BUILD HERE (LINKS AND PARTS) 👇
short spec movie about this build of a Suzuki GRAND VITARA 2008
MORE INFO -
LIFT - 2' lift kit by dobinsons + 40cm spacers will need some more adjustment to the suspensions. like camber angle adjustment bolts to align the front wheels. from my experience, that's all you will need for that lift.
WHEELS - it's a 16-inch rim with 0 offsets. the original rim is +45 offset.
to feet 245/75/16 wheels you also will need 4xfourart control a arms.
and in the back of the car, as you see in the movie, you will need more parts from 4xfourart to fix and align the rear axle and wheels.
About CV - ( front & back ) so far after 8 months with it, it seems fine. didn't break, and not making any noises.
FOR MORE OFF-ROAD VIDEOS -
DESERT RIDE - • גרנד ויטרה בשטח grand ...
SUZUKI GRAND VITARA TWIN LOCKERS ROCK CRAWLING - • SUZUKI GRAND VITARA tw...
SUZUKI GRAND VITARA BIG SAND DUNES - • גרנד ויטרה איסוזו רודא...
---LET’S BE INTERNET FRIENDS---
INSTAGRAM (I.SHOOT.CARS) - / i.shoot.cars
INSTAGRAM (FOOD PHOTOGRAPHY) - / liranm_photographer
PRESONALINSTAGRAM - / liran.maimon
FACEBOOK - / liran106
email : liran106@gmail.com
קישורים לתוספות - PARTS LINKS
שפאלות - ‪@LKLTD‬ ל.כ. כלי עבודה וציוד בע“מ - תקומה 10 , רמלה - RECOVERY TRACKS - local store
לד בר -‪@LKLTD‬ ל.כ. כלי עבודה וציוד בע“מ - תקומה 10 , רמלה - LED BAR - local store
צמיגים - ‪@JOSEPH_ONE_STOP_SHOP‬ - אלטלף 9 יהוד. - TIRES - local store
ג'נטים - ‪@JOSEPH_ONE_STOP_SHOP‬ - אלטלף 9 יהוד. - RIMS - local store
נעילות דיפרנציאל TRE - אלי טמבור / eli4x4tambur - TRE DIFF LOCKS
התקנת נעילות דיפרנציאל - / taltzofioffroad - DIFF LOCKS - local store
הייליפט - ‪@LKLTD‬ ל.כ. כלי עבודה וציוד בע“מ - תקומה 10 , רמלה. - TMAX HIGHLIFT - local store
הגבהות - / taltzofioffroad - דרך בן צבי 11, תל אביב. - LIFTS - local store
קאט אוף אגזוז - / taltzofioffroad - דרך בן צבי 11, תל אביב. - CUT OFF EXHAUST - local store
ספוילר - פירסט קאר יבוא ושיווק אביזרי רכב - REAR SPOILER - local store
כננת - / taltzofioffroad - דרך בן צבי 11, תל אביב. TMAX WINCH - local store and diy installation
הקיט החלקי של פורארט - www.4xfourart.com/ ‪@4xfourart311‬ - 4XFOURART PARTS
תאורת סלעים לבתי הגלגל - a.aliexpress.com/_oBMtNjc - ROCKS LIGHTS
אורות ברקס - a.aliexpress.com/_omuXdLs - REAR BRAKE LIGHTS
תשובות לתאורה על מכסה המנוע - a.aliexpress.com/_oFZ7MuW - HOOD LIGHTS BRACKET
תאורה על מכסה המנוע -‪@LKLTD‬ ל.כ. כלי עבודה וציוד בע“מ - תקומה 10 - HOOD LIGHTS - local store
תאורה כתומה לגריל - a.aliexpress.com/_onIYGYQ - FRONT GRILL AMBER LIGHTS
כיסוי לפנסים אחוריים - a.aliexpress.com/_okpVEO6 - TAIL LIGHTS COVER (self painted black)
מדבקה דגל יפן - a.aliexpress.com/_onetUhu - JAPAN FLAG STICKER
WHAT’S IN MY CAMERA BAG : 2024 UPDATED
MY CAMERA BAG: Lowepro Whistler RL 400 AW II
MY GOTO CAMERA : Sony a74 + Sony a73
MOST USED LENS : 50mm 1.8
MY LAPTOP - MacBook Pro m1
MY DRONE: dji mavic air 2
ACTIONCAM: GoPro 8
LENSES: sony 28mm f2 - 50mm f1.8 - 85mm f1.8
100mm macro f2.8 - 20mm f2.8 - 70-200mm 2.8.
ISHOOT ALSO WITH MY PHONE : iPhone mini 13
BIG THANK YOU TO THE OWNER - ‪@eitanbar6370‬
ANT TO MY FRIEND AND ASSISTANT - ‪@elirandadon6334‬
‪@DobinsonsSuspension‬
‪@IRONMAN4X4_International‬
#cars #carphotography #carslover #car #carsofinstagram #automobile #automobilerepairshops #automobile

Пікірлер: 98

@askherbs Ай бұрын

This should be entitled, “An Ode to the Grand Vitara”. Very wonderfully made video.

@i.shoot.cars. Ай бұрын

Thank you for watching 🙂

@kenalfred7242 2 ай бұрын

Really nice build😊👍🏾.

@i.shoot.cars. 2 ай бұрын

Not mine But thank you 🙏

@borislavmihajlovic5486 4 ай бұрын

Poslednja generacija Vitare koja vredi nesto imam ih od 91god.do 2016,ova zadnja je obicna Madjarska bizuterija,pozzz odlicno odradjeno

@i.shoot.cars. 4 ай бұрын

hi man thank you! great car! loving it! also the older models obviously

@donvancu 25 күн бұрын

a ball lark sum of money for all the mods combined? thx and great gv video🎉

@i.shoot.cars. 18 күн бұрын

thank you/ i dont to tell u its not my car :)

@imsangerlongkumer2416 4 ай бұрын

Wow! m impressed with ur mods. Excellent video.

@i.shoot.cars. 4 ай бұрын

hi thank you :) i'm only the photographer. its my friend car.

@KILINalushta Ай бұрын

excellent vihical !

@i.shoot.cars. Ай бұрын

thank you

@ktm690endurorally 4 ай бұрын

Awesome! Thanks so much for making such a brilliant upload

@i.shoot.cars. 4 ай бұрын

thank you for watching :)

@user-pq1to4jb9o 4 ай бұрын

日本人です。海外で日本車を乗ってくれて嬉しい限りです。日本ではビターラではなくエスクードと言う名前で販売されています。自分も乗りたい😅

@i.shoot.cars. 4 ай бұрын

おいありがとうあなたが日本でもフォローしていて、私がアップロードしたコンテンツに触れていると聞いてうれしいです。日本のお友達とぜひシェアしてください。これはチャンネルを宣伝するのに役立ちます。この車両に興味深い点や改善点があれば、喜んでお知らせいたします。ぜひシェアしてください。

@user-hx7tw6vi2u Ай бұрын

מדהים

@i.shoot.cars. Ай бұрын

תודה רבה !

@tpbook 2 ай бұрын

great!

@i.shoot.cars. 2 ай бұрын

Thank you 😊

@JOSEPH_ONE_STOP_SHOP 4 ай бұрын

AMAZING!!!

@i.shoot.cars. 4 ай бұрын

Thank you 😀😀😀

@Off-Road-Dune 4 ай бұрын

וואו איזה עריכה אלוף!

@i.shoot.cars. 4 ай бұрын

תודות 🙏🙏❤️

@LILALIZEFLAME 4 ай бұрын

Awesome. Triple locked GV, I'm envious. Must be good, now a 3.2 engine swap

@i.shoot.cars. 4 ай бұрын

Thank you 🙏 U know someone who did that ?

@user-rg6nb5kf8f 2 ай бұрын

@@i.shoot.cars. in Russia, guys swapped 2.7

@jason6570 3 ай бұрын

Awesome vid bro, love your GV, definitely want to modify my GV similarly to yours

@i.shoot.cars. 3 ай бұрын

Thank you 🙏 It’s not mine 😏 My friends car. Mine also white. But not as cool looking like that one

@andresjacalo 2 ай бұрын

wow ❤❤❤❤❤❤❤❤

@i.shoot.cars. 2 ай бұрын

Thank you 🙏

@chutenger 2 ай бұрын

Wow! So great

@i.shoot.cars. 2 ай бұрын

Thank you 🙏

@Coolie-ds4tu Күн бұрын

I have a 2016 Grand Vitara 2.4 with the same Dobinson suspension. It's great and better than stock, but the tires are too spread apart by using 40mm spacers and will not fit inside the fender anymore. Anytime the vehicle is fully loaded and jumps over an obstacle the tire will hit the bottom of the fender

@user-pq6tn3jf4e 2 ай бұрын

Тачка вещь

@suzukigrandvitara44israelt41 4 ай бұрын

אלוףףףף

@i.shoot.cars. 4 ай бұрын

תודות ❤️❤️

@eitanbar6370 4 ай бұрын

Amazing !!!!!! ❤

@i.shoot.cars. 4 ай бұрын

Thank you owner 😀

@eitanbar6370 4 ай бұрын

My pleasure ❤

@juancabrera7246 2 ай бұрын

Ufff 🔥 ...maquinon bro!

@i.shoot.cars. 2 ай бұрын

🙏🙏🙏🙏

@SaxbyVisuals 4 ай бұрын

Nice, video!

@i.shoot.cars. 4 ай бұрын

thank you for that!

@i.shoot.cars. 4 ай бұрын

תודה אחי :)

@navibe4x4 2 ай бұрын

Nice #navibe4x4

@i.shoot.cars. 2 ай бұрын

Thank you 🙏

@Milthiadus 4 ай бұрын

That's great! Thank you so much for the beautiful and informative video! Than was i wanted! :) If possible, a couple of questions about this car (maybe your Friend will answer) 1. What is the reason for the choice of different manufacturers of shock absorbers on different axles? Ironman in front and Dobinson in the back; 2. There are 40 mm spacers at the back under the spring. Has the rear shock absorber transfer bracket been applied? Because + 40 mm on a spring without installing such a bracket is guaranteed to pull out the OEM shock absorber. I understand that the Dobinson is longer than the standard shock absorber, perhaps it does not pull out, but then it will have very little down travel. 3. With a longer shock absorber in front + 40 mm spacers under the top of shock absorber, does the front wheel drive bite in the lowest position? I also have extended shock absorbers (of another brand - RIF) + a 3cm spacer in the front. I want to install a higher front spacer, but the front left drive start to biting.

@i.shoot.cars. 4 ай бұрын

hi thank you for your comment ! 1. i think that's what we had in stock in the country at that time. 2. the spacer is on top of the spring. didn't QUITE understand the 2ns Q. the dobinsons is longer/ i think u right. the ironman shock is also feet to a 2 inch lift like the dobinsons shocks. 3. it is lower. probably effect on the front a arm wear and ball joint. the 4xfourart supposed to compensate that. yae if the travel is to much the cv will affect.

@samirbenites5569 4 ай бұрын

Hermosa máquina bro, de la ptmr

@i.shoot.cars. 4 ай бұрын

thank you brother!

@jenyapopov8755 4 ай бұрын

בניה יפה!

@i.shoot.cars. 4 ай бұрын

מאוד. הרכב לא שלי :)

@jeremyharris4415 4 ай бұрын

Wow looks awesome and I’m guessing you don’t have any problems with bottoming out any more. Because I do I so need to do what you have done to your one

@i.shoot.cars. 4 ай бұрын

thank you ! do that! it's a different car after that!

@user-kw7bj8xe2o 21 күн бұрын

hello ,can you give some info about the rims please?

@i.shoot.cars. 18 күн бұрын

hi sorry i dont more then when in the video.

@Jason79wells 3 ай бұрын

Where did you get the taillight cover trim? Looks very slick

@i.shoot.cars. 3 ай бұрын

Thanks Link in the description It came metallic color and we painted it black

@pirkebojan 4 ай бұрын

NICE WORK ❤❤❤ Dobison have 5cm suspension lift + 4cm spacers? Do you put 4cm spacers on shock absorbers and springs on front and back suspension? How do the half shaft angles work, are they within the allowed limits? Thank you

@i.shoot.cars. 4 ай бұрын

thank you for that ! and for watching :) the spacers are not dobinsons. but yes spacers on top of the springs. the shaft are good so far after few months. and it's not the first car that build like that.

@alexz7111 Ай бұрын

Was good to be with BF instead of Maxxis. It is better tyre, but any way, I like it alot! Do you know if you use only spacers lift kit +50mm, with stock springs what is the maximum tire that will fit without issues?

@i.shoot.cars. Ай бұрын

thank you can't really tell/ sorry

@Bezi.v 4 ай бұрын

Looks nice. I only have +5cm EFS Elite suspension. I am trying to figure out if the 245/75R16 would fit. Also have in plan to change rims to ET 0. It helps a lot to see the fitment on yours.

@i.shoot.cars. 4 ай бұрын

hi thank you i can answer about the wheels and if it fit without fixing the angels with the 4xfourart kit. and also at the rear if u not install the kit it probably touch the arch with the front of the tire. what the kit do is to take the rear axle backwards. hope its helps

@Bezi.v 4 ай бұрын

@@i.shoot.cars. thank you. Unfortunately the kit is not aveilable in Romania :( . Will go for 245/70/R16

@i.shoot.cars. 4 ай бұрын

i'm pretty sure if u contact them they will send it to your country. in israel its also not available in the stores. we contact them by mail and they sent it/ pretty fast also@@Bezi.v

@adrianrorvik7488 3 ай бұрын

@@Bezi.v I have a 4cm lift kit (Stofpad, which means dust road, in South Africa-- standard everything else as far as suspension goes) with 246/70/R16. No issues at all, although my offroading has been light and mostly in sandy conditions. I do drive on gravel tracks every few days.

@Vlad-ky8id Ай бұрын

Hello!Can you tell plecase how you fit this wheels on your gv , i want to put on my gv ,is stock .thanks!

@i.shoot.cars. Ай бұрын

hi at first, you need al 2-inch lift. if you don't have highly recommended. second you need to install 30 mm spacers on top of the 2 inch lift. then you need to to tri, front bumper plus the arch between the front wheel an door. in the rear, you need to replace the trailing arm bracket to move the rear axle backward. that way the wheel will not touch the rear door

@Vlad-ky8id Ай бұрын

@@i.shoot.cars. thank you so much , i like your videos 👍👍

@i.shoot.cars. Ай бұрын

@@Vlad-ky8id thank you for watching 😀

@a.y.s.101 Ай бұрын

Which suspension do you recommend for grand vitara. Ironman 4x4 nitro gas or dobinsons?

@i.shoot.cars. Ай бұрын

not ironman. i saw 3 sets getting bend. doibisons are good

@a.y.s.101 22 күн бұрын

@@i.shoot.cars. got the dobinsons and i am happy with it. Most people i ask have your view on ironman

@darkwingduck9704 4 ай бұрын

Nice build. Any links to the rack you're using

@i.shoot.cars. 4 ай бұрын

Thank you. I’ll ask. Probably from local store

@darkwingduck9704 4 ай бұрын

@@i.shoot.cars. I'm from Seychelles but thanks, someone else could benefit from it

@i.shoot.cars. 4 ай бұрын

@@darkwingduck9704 in the end it's a universal rack. i'm sure you'll find something similar :)

@darkwingduck9704 4 ай бұрын

@@i.shoot.cars. Thanks, I'll look around... keep up the good work

@Pitstop-uc8vw 16 күн бұрын

Wheel offset

@i.shoot.cars. 15 күн бұрын

0 I think

@user-is7xz7jx6z 2 ай бұрын

Great vid! Just wondering if you had to buy the parts from 4xFourart in a kit or if you bought them individually? I don’t want to spend €2000 when I only need the control arm and trailing arm. I already have a 50mm suspension lift and want to add spacers like you!

@i.shoot.cars. 2 ай бұрын

Hi thank u If u want more hight without big changes like fourart parts. Go with 30 mm spacers and u will be fine. We did on my car. Not the car in this movie. And you don’t have to buy the all kit from 4xFourart

@user-is7xz7jx6z 2 ай бұрын

@@i.shoot.cars. great! If I add 30mm spacers do I need upgraded ball joints please?

@i.shoot.cars. 2 ай бұрын

@@user-is7xz7jx6z thanks No. In my car I have 40mm in rear and 30mm in front and I didn’t change anything

@user-is7xz7jx6z 2 ай бұрын

@@i.shoot.cars. great thanks so much for your help! I’ll order some 30mm spacers to add to my 50mm existing lift.

@pirkebojan 2 ай бұрын

I think you can add 30mm spacers in front and 40mm in back on stock fabric shocks and struts. To add this on your 50mm added lift kit its question ??? @@user-is7xz7jx6z