Short video discusing how I modified an available bushing, since the proper bushings are not available except when purchased with the arms (at like $100) This is my first video, so cut me a little slack :-)
Пікірлер: 42
@ronspudmanwilliams16697 жыл бұрын
Thanks a bunch. I did just what you told me and it worked perfect. I needed to fix it quick as we are in the middle of a snowstorm and I need the 4 wheel dive. Thanks again !!!
@jamesscholz83383 жыл бұрын
Thank you so much!! Your much better at wielding a box cutter than me! I had an easier time cutting the slits with a dremel. The noise my wipers were making before was excruciating, but it's so much better now!
@PatAbramson7 жыл бұрын
Great fix!!! First try it didn't want to fit. I needed the shave a little more around the outside and open the slits alittle more. I used a socket to pound it on with a brace underneath and wah lah!
@joseburgos37192 жыл бұрын
it works i just did the repair on my old Forenza it takes a little soft hammering for it to go in in my case i had to remove the entire mechanizim and press it in. it might be a old video but it save me $89 dollars.
@kenbartline72237 жыл бұрын
Well, it is back together, it works excellently. I used tiny c-clamps to help pop it back together incrementally. Just a hint for those struggling with pushing it in. It should last a long time. This was a $4 fix compared with a $100 fix for the arms. Thanks!!
@kenbartline72237 жыл бұрын
I am trying this now. I was wondering if you cut the slots bigger at the lip.
@izenikgabeko62444 жыл бұрын
Great job dude! I copy this right now. Where can I find those wonderful bushings? Thanks.
@luisarturogarciaarmijo911710 күн бұрын
Excelente Maestro 👍
@SawDustGordo7 жыл бұрын
Yes. I think you should be able to see that if you look close. They need to be wider
@SawDustGordo7 жыл бұрын
Yeah it's been great. Many rain and snow storms, no problems
@vinceh84687 жыл бұрын
Thanks for sharing the tip.
@kenbartline72237 жыл бұрын
I got it together with the new hacked bushings. It is very snug and the mechanism moves stiffly. You have that experience at first? I haven't turned it on yet. The window is off the vehicle. I just want to be sure it is right be fore I put it al back on the vehicle.
@SawDustGordo7 жыл бұрын
Mine was tight but not bound up. It should move, but needn't be loose
@danielarivas85027 жыл бұрын
how can i take the wipers of?
@justinmaguire11406 жыл бұрын
Thanks for the video. I just bought wiper linkage arm with hardware on Amazon for $25
@SawDustGordo6 жыл бұрын
Are you saying you bought the arm with these bushings that I'm talking about in this video on Amazon for $25? If so please post the link! That makes a lot more sense than going through all this
@justinmaguire11406 жыл бұрын
gbarcomb SUZUKI SJ410 SJ413 NEW WIPER LINK LINKAGE ARM ROD DROVER SAMURAI JIMNY SIERRA LJ www.amazon.com/dp/B073HZ8G3W/ref=cm_sw_r_cp_apa_E-pwAb1Y3VT6Z
@justinmaguire11406 жыл бұрын
I haven't put this part on yet, I found this video looking for a video to get to the linkages.
@SawDustGordo6 жыл бұрын
Looks right. Let us know
@gustavoantunez65324 жыл бұрын
Hello can you send me the link for the arm plate company thanks my samurai hard top is in very bad wiper shape
@juanbeltran3517 жыл бұрын
hey on my zuki the wipers are not even? ?
@SawDustGordo7 жыл бұрын
Awesome
@errolrojas34606 жыл бұрын
Wanted to let you know that Suzuki has been making that same plastic cup that broke on your car across the board for all their models. Go to a junk yard, open any other Suzuki car and get that same plastic bit and you will see its a perfect match. Same bit for all Suzuki cars...
@Pedro07A Жыл бұрын
Como as sacado el varillaje del suzuki ?
@davidbutcher6637 Жыл бұрын
Hi do you have a link to the kit ?
@kenbartline72237 жыл бұрын
Have you had continued success in the last 6 months with this fix?
@SawDustGordo5 жыл бұрын
2 years running
@aztec000015 жыл бұрын
Where did you get the windshield wiper plates? Link please
@SawDustGordo5 жыл бұрын
As mentioned in video, these came from ZOR. Most Samurai aftermarket providers have them. Google is your friend.
@GG-gz6su4 жыл бұрын
Hello Gordo I have a 1988 Suzuki Samuari,,, what year is yours...I have been attempting to locate wiper motor,, they told me its behind glove box on passenger side.. I dont see it..I think it on driver side. any tips please advise. Thanks in advance. RJ
@jamesscholz83383 жыл бұрын
I have an 88 as well. It is more technically above the glove box. There's a 8" or so beauty cover that you can pop off from the dash right next to the windshield, you'll be able to see it from there. FYI, replacing it does require unmounting the whole dash, and disassembling some of the air conditioning ducts. On the pain-in-the-ass scale I'd put it at 8.5.
@dariom87292 жыл бұрын
@@jamesscholz8338 @Gordo the Wood Butcher the video shows he removed the windshield, not the dash. What year is the Samurai from the video? I wonder if I can remove the windshield too. Mine is an '87.
@jamesscholz83382 жыл бұрын
@@dariom8729 I think it is better say that we folded down the windshield. I couldnt say with confidence what year the one in the video is, but mine was an 1988 1/2 with a tin top. I needed to remove my dashboard to do the job, my windshield did not fold down.
@DavidB-rx3km2 жыл бұрын
I LOL'd at 4:17
@kenbartline72237 жыл бұрын
I did use lithium grease. I realize now that the surface I was on was gripping the wiper posts. It does a little easier now. I think the real issue is someone needs to laser print the originals out of a different quality of plastic. The originals are too hard and crack easily.
@difflockengage9228 Жыл бұрын
Is your samurai monstalined by chance?
@SawDustGordo Жыл бұрын
It is! Freaking LOVE that stuff. Still holding up even as my poor body repairs allow her to rust away lol I once drug the passenger side against a tree and couldn't find a mark lol
@SawDustGordo7 жыл бұрын
you could be the one
@SawDustGordo7 жыл бұрын
Might require a little lithium grease. Wish I would have done that now that I think of it
@GG-gz6su4 жыл бұрын
Hello Gordo I have a 1988 Suzuki Samuari,,, what year is yours...I have been attempting to locate wiper motor,, they told me its behind glove box on passenger side.. I dont see it..I think it on driver side. any tips please advise. Thanks in advance. RJ
@msi42263 жыл бұрын
am serching high and low for such item for my BMW X5 Wiper linkage rod