Wow. Great work bench! Perfect for my needs too! Weekend warrior. Foot pedal is the best idea yet.
@how2q2 жыл бұрын
Thank you…if i were to change one thing it would be size of hoses on dust collection. Pedal is great!
@patty109109 Жыл бұрын
Lots of these vids, but most do not include the t-track and you sold me on it. About to throw something like this together.
@how2q Жыл бұрын
Great… hey, I’m happy I did it. Also helps when you’re sanding on need something held down. Just wish i could have built it bigger!lol no room
@jeffmadorski96693 жыл бұрын
Nice touch with the storage under the melamine!
@how2q3 жыл бұрын
I got that from “i like to make stuff”. Had to try it. Recommend building one NOT during the phoenix summer🤣
@markswheelsandwings65953 жыл бұрын
That’s a sweet setup. Great for any project!!
@how2q3 жыл бұрын
Thanks mark!
@dannyfalcon34493 жыл бұрын
Awesome setup! Gonna make it for myself as well. Thanks for sharing
@how2q3 жыл бұрын
Cool...watched a ton of these videos before i set mine up. Glad it helped
@FlyingwithBigErn3 жыл бұрын
Great video Q! That's an awesome setup! I don't have much room in my garage as well and this is a perfect setup. Cheers!
@how2q3 жыл бұрын
Throwing those weights around? Thanks for watching!
@conscience-commenter2 жыл бұрын
Beautiful job Quinn . How much were the materials and labor time ? I see quite a few people asking for dimensions in the comments . Of all the mobile workbench videos I have watched , yours has the optimal layout design while being compact . When space is at a premium, your design fits nicely in your garage and has all the bells and whistles to facilitate construction with faster clean up . Outstanding .
@how2q2 жыл бұрын
Materials would be an unfair comparison...I did this before wood spiked. I would estimate it was less than $150.00 at the time. Probably double now. Time...hmmm...2 full days. Basic dimensions is 32"D x 41" H x 76.6" L. Still love it!lol
@Mike-kq7cr2 жыл бұрын
Hi. Love your bench. When will you post the build plans?
@how2q2 жыл бұрын
Mike- Thank you...I don't have plan persay but can give you dimensions when I return from christmas trip.
@Mike-kq7cr2 жыл бұрын
@@how2q That would be great. I am actually in AZ also and my kids live in Queen Creek. I would love whatever information you can send. Also, is this bench big enough to rip 4x8 sheets? Thanks!
@mikelonneman142 жыл бұрын
Love the video - very informative, especially the dust collection. Could I hire you to build this for me? I’m in Chandler.
@how2q2 жыл бұрын
Haha diy dad…wish i had the time!
@mikelonneman142 жыл бұрын
@@how2q - Don’t we all! Appreciate the reply. I haven’t decided what I want to build yet - gotta figure out my garage space a little better first!
@how2q2 жыл бұрын
I would not recommend size hose i used it works but i think smaller hose would provide more suction especially w wet/dry vac setup. Also…home depot dust separator works but i think dust cyclone (more expensive) would even do better job. Definitely get anti clog blast gates. All lessons learned
@robertlink6097 Жыл бұрын
Quinn, Great bench!!! Going to make one just like it. Curious, what gas strut did you use? How many lb holding power do struts it need? Thanks again, God Bless!
@how2q Жыл бұрын
Here are the ones I used. I thought i would need two for each compartment put they were a little stronger than I thought and only needed one. amzn.to/3GLP6Iq
@robertlink6097 Жыл бұрын
@@how2q thanks Quinn!!
@tsharrelson3 жыл бұрын
Do you have any plans for this bench! I too only have a garage and I like to keep it for my cars, so I would like something as flexible as this. I've literally looked at over 50 different mobile workbenches on google and KZfaq and your build outranks all the others I've watched! I'd also love to learn more about this dust collection system you have - very well put together!
@how2q3 жыл бұрын
Thank you…i actually don’t have plans for bench. I am away on vacation…when i gwt back will try and give general dimensions. Dust works but i have tweaked it a little. Smaller hoses help w suction. I changed out blast gates for “anti-clog” gates. I have it linked in description
@jmpiiii3 жыл бұрын
Nice job. I’ve watched a lot of videos of similar builds, and you definitely have some unique features. I really like the use of the space beneath the saw with the shop vac and compressor. I will definitely be borrowing that idea for my build. It doesn’t look like you ever posted build video mentioned. Could you share the overall dimensions?
@how2q3 жыл бұрын
Build vid still on my to-do list. With wheels...40.25” H, 76.75” W, 32” D. I replaced blast gates (the ones i used in this video kept getting clogged). I would also consider smaller diameter hose for more suction. Any other specific q’s let me know.
@sebastiansworkouts24573 жыл бұрын
Looks amazing
@how2q3 жыл бұрын
Thanks sebastian...love the channel!
@FrancoOrlando13 жыл бұрын
cool, nice job! 👍 😀
@how2q3 жыл бұрын
Thanks franco...long overdue project. Makes life easier
@rubyjijon42122 жыл бұрын
How install the glass door when the wall are not even
@how2q2 жыл бұрын
I wish I could help but I do not do installs. I would possibly use a shim(s) to account for wall being not straight. Must have been a bad install if it is tiled...installer should have plumbed wall