How to service and reassemble Shimano's super stopper anti reverse up close and in 4k.

Рет қаралды 85,694

6 жыл бұрын

Antireverse problem? No Problem
This video provides up close details on how to reassemble the Shimano anti reverse clutch.
Be sure that if you use any lubrication. Once reassembled put the reel in the fridge for 10 minutes and check to make sure it functions properly.
Reels these can be found on
Shimano nasci amzn.to/2FFCOBz
Shimano Stradic FK amzn.to/2FKZ8Kg
Shimano Stella FI amzn.to/2oz5ftt
Shimano Exsence amzn.to/2FILUxw
Shimano Sustain amzn.to/2FIL4Ro
Shimano Sedona amzn.to/2F2A7gf
To make a direct financial contribution which enables me to continue supporting the fishing community in ways that nobody has done before. Check this out / tackleadvisors
or paypal.me/tackleadvisors
For a list of tons of products I regularly use and have full faith in
Check this out
www.amazon.com/shop/influence...

Пікірлер: 157

@johnbfishing 6 жыл бұрын

The most comprehensive look I’ve seen on the ci4 A/R. I’ve been dreading having to tear into mine but after viewing this video, I’m game. Appreciate ALL of your high quality and user friendly videos!

@alexandreviens813 Жыл бұрын

😊

@arayazaryan3235 5 жыл бұрын

Just wanted to take a moment and say a big thank you for making this video. It really helped me to repair the can-of-worms that was my Shimano Sedona. Your video helped extremely, even though my reel does not have the Super Stopper Anti-Reverse (the bearing housing is comparable though. It fixed my extremely frustrating anti-reverse problem! Your video was extremely detailed and very helpful. Thanks again!

@riley7796 6 жыл бұрын

This vids a life saver. Tore down my shimano symetre 4000, passed down reel from my gramps. Its the 2004 model and it is still quite smooth, but i wanted to put some corrosion x around the sideplates etc. For surf fishing. I tore it down and noticed a lot of dirty grease and water got into the super stopper. Took it apart and aimlessly put it back together to end up with a disfunctioning anti reverse! Was about to part it until i saw this vid... great content for any shimano fanboy!

@pmcmanigal 3 жыл бұрын

I have a Sustain 2000fb, and the super stopper just quit working. I'd tried to repair it using another video on the topic, but couldn't. Your video was a BIG help, and I'm back after the fish. Great video. Thank you!

@Choffa09 2 жыл бұрын

This video was a life saver! I broke down my Stradic ci4 2500F and was not sure how to properly install all the parts! Thank you!

@elijahsmith8585 Жыл бұрын

Best video I’ve found on here. I was so frustrated about throw away a high end reel due to not figuring this out. Thank you so much!

@megsieodriscoll5954 6 ай бұрын

Thanks heaps, fixed my sienna reel. The anti reverse was constantly on. Now it works beautifully.

@mojondro 4 жыл бұрын

O man can't thank you enough for this beautifully explained teardown and reassembling

@kevinmatuszak259 Жыл бұрын

Great video. I dropped my AR assembly and got it "mostly" put back together. Your video helped me get it back together properly. GREAT WORK!

@richardsmith1674 3 жыл бұрын

Just saved my life. Had broken side cover and had to replace when reverse gear fell apart as I took it off. Luckily I managed to find all the parts but had no idea until I watched this. You need to make sure all the springs are perfectly positioned otherwise it won’t work properly. As the rollers won’t close properly.

@user-uw9uh1te8h 10 ай бұрын

I value your excellent video. I was able to repair my Sienna 2500 FD anti-reverse with your video quickly. Other videos avoided the complicated Shimano clutch system due to the complexity. Thank you for your assistance..

@neilmendoza5264 Жыл бұрын

THANK YOU SO MUCH! I had a malfunction in my fx c3000's anti reverse lock and this vid helped me! Parts are a bit hard to find here in my area and reels are expensive so I'm really thankful that I fixed it.

@georgedixon8105 9 ай бұрын

I’ve just serviced my Stradic 1000 20 years old, it’s perfect now the super stopper was slipping I disassembled it but there was no need you only need to take the longer screws out and steep the whole unit in alcohol, cheers

@gegelapoisse4364 Жыл бұрын

Je ne parle pas anglais correctement, mais là c'est tellement bien expliqué que j'ai pu sauver mon Stradic avec votre aide. Un grand merci I don't speak English properly, but this is so well explained that I was able to save my Stradic with your help. Thank you very much.

@davidbell5874 3 жыл бұрын

thanks for a great video. The start of the video is exactly what happened to me but I successfully reassembled it thanks to you.

@valencia_m__ 3 жыл бұрын

many man y thanks for this video, you saved my reel! I opened my shimano sienna 1000 and all the springs and cilinders came out! thanks to you i solved this disaster! THANKSSSSSSSSSS!

@estopado69 5 жыл бұрын

Thanks to this video, I can use again my months long idle stradic due to anti-reverse problem. :)

@keybiscaynehardware7531 4 ай бұрын

Great video! It did help me reassemble the anti reverse. I did remove all of the lubrication and reassemble the reel. But the anti reverse clutch still not functioning. Will have to reassemble and recheck every thing. Thanks for posting.

@scottfleetwood3392 10 ай бұрын

Thanks for this vid. I over greased my aero 2500fa and wondered why my anti reverse stopped working. Stripped and clean all working fine again.

@jamesloerzel4377 6 жыл бұрын

I love this kind stuff, its next to impossible to find something like this when you need it, and in this kind of detail, i would not be as nervous going thru mine

@ashmodownunder 9 күн бұрын

Thank God this video exists 😂🙏

@vinfish4697 6 жыл бұрын

Excellent attention to Detail yrs ago I put my springs upside down

@paulitaipalus4986 Жыл бұрын

Saved my day and perfectly good reel following your advice. Thank you.

@PPALoft 4 жыл бұрын

Amazing tutorial and explanation. You're doing an amazing job

@ernst6787 3 жыл бұрын

Thank you so much! With your instruction I could rescue my Biomaster XT 8000. Greetings from Germany

@matthewpanuska9175 Жыл бұрын

Thank you SO much for this video man! Of course I took the whole thing apart and it exploded like a bomb… 😂. I put it together completely wrong. Thank God I found your video! Reel saved!!!

@bloke5874 28 күн бұрын

Excellent tutorial! 10/10! Many Thanks.

@TheLks84 5 жыл бұрын

Tnx man...that was verrryyyy useful. God bless you

@mehyomollem4763 Жыл бұрын

yesterday i messed this up !!! thank you loads !!

@Cowboy84118411 2 жыл бұрын

Thank you, I just did the uh ohh part at the beginning of the video. Spent hours trying to figure it out. Thanks for this video. New subscriber here.

@guyaustin5962 4 жыл бұрын

Thanks man- I tried to rebuild mine 3 times but it was just not rightYour video put me right on key points and i now have a fully functioning reel

@TackleAdvisors 4 жыл бұрын

Eyyyy... Glad to have helped and glad you're up and running.. Just remember any lube on the top and bottoms of the cylinders may cause failure since they can't move inward and out

@strew516 2 жыл бұрын

Helpful in that you did a great job in clearly filming the correct position of the springs but for whatever reason the reel still spins backwards. In your defense, I'm working with a Saragosa 20k that also has a anti reverse pawg spring that became damaged during a cleaning. I could be wrong but I read somewhere that this part is a back up to the roller clutch assembly so I gave your method try.

@deejayskip4089 2 жыл бұрын

Extremely helpful!

@user-yo2yv5es2c 3 ай бұрын

Saved my bacon again. After a few hours of trying to figure it out without success. I had my reel fixed in 15 minutes after reviewing this video:)

@myke.h2913 4 жыл бұрын

The anti-reverse is an important facility often used when backwinding a fish especially carp! in the UK.

@victor-oq8uf 2 жыл бұрын

Thank you so much bro!! 9:05 The oil was the problem with 2 of my reels after maintenance. I wash the lub and now it works perfectly! +1 sub :) Greetings from France

@joefrancis5448 8 ай бұрын

Should we oil or not

@casual4419 4 жыл бұрын

Amazing this saved my spheros 6000fb.

@smoovefishing 6 жыл бұрын

Great video as always!!

@johngullotta3987 3 жыл бұрын

Awesome video!

@TwoFishermenfromisrael 2 жыл бұрын

Thank you very much, helped me a lot to fix the roller

@thiagohigino 3 жыл бұрын

Great video! So helpful and Very well explained. Thanks a lot!

@NEWME4UNMEBOTH99 10 ай бұрын

Great camera work.

@ShorrockPaul 10 ай бұрын

Great tutorial

@eemil330 3 жыл бұрын

Thanks! You saved my day.

@chrisaguilar8850 3 жыл бұрын

Very helpful!!! Appreciate your help

@tombarrow8372 2 жыл бұрын

Thanks my friend!

@gameofman 6 жыл бұрын

Dude, your tear down of the anti reverse clutch almost get me heart attack 🤣 awesome by the way 😂

@user-hr3nr8lm2l Жыл бұрын

I disassembled my Shimano Exsence & the lock malfunctioned & i saw your tutorial video sỗ i tried & i made it. Thnk you so much to this tutorial. Godbless.

@TackleAdvisors Жыл бұрын

glad it proved helpful!

@ex8280 Жыл бұрын

Love the intro.

@justinskywest 3 жыл бұрын

When I service these I install the pins with the clutch sleeve in. It helps keep them in place

@DailyFavs Жыл бұрын

Big help. Thanks

@kenanemadali9304 4 ай бұрын

Thank you so much for sharing your knowledge. I appreciate you!! Saved me money and gained some knowledge. 🤙🏽🤙🏽🤙🏽 From Honolulu Hawaii…

@mikes717 3 жыл бұрын

That little segment you did was literally me at 10pm the night before my big fishing trip, which is today :) Bought the sienna 4000, couldn't find out why it wasn't smooth as it was when I bought it last week. So, I tore it down, greased the gearset with some Mercury Quicksilver grease I had for the boat (didn't really have anything else laying around). I saw some bearings and decided I was going to throw a dab of grease on there too, not realizing it was the anti reverse system. Popped the screw out and realized I dun goofed when the springs came out. This vid saved my ass. So thank you for saving my trip.

@belindatreca 2 жыл бұрын

Me sirvió muchisimo, gracias por compartir.

@zendusa 3 жыл бұрын

Thanx a mill fixed my reel with this very details guide 100th

@TackleAdvisors 3 жыл бұрын

Awesome! glad to have helped

@andreatassera2014 Жыл бұрын

Dude you saved my a** :D I opened the assembly by mistake (just because I didn't know what it was) and wasn't able to put it back together

@maliksalgado704 2 жыл бұрын

Thanks Bro, nice video.

@Cast412 3 жыл бұрын

Very Informative video on how to reassemble an anti reverse pawl! What do you do to maintain or restore it. Do you clean it, degrease it?

@jmcfishing430 6 жыл бұрын

Great Video man!!

@TackleAdvisors 6 жыл бұрын

Yoooo....where you been my otha brotha from anotha mutha......HMU!

@lindon98 3 жыл бұрын

Great info!

@andreasdamas3121 2 жыл бұрын

Awesome, headache cured, thanks

@bonolao30 3 жыл бұрын

Huge help there bro!! Keep up making quality videos! I Subscribed and Liked! All the best!

@TackleAdvisors 3 жыл бұрын

Glad it helped.... Thanks brotha!

@penio1234567890 Жыл бұрын

Thank you! cheers!

@jankopallon6488 4 жыл бұрын

Thanks men helpt my a lot 👍😁

@mhafishing1580 2 жыл бұрын

Thank you

@alvarolar1 2 ай бұрын

Excelente!!

@muratalpay5994 2 жыл бұрын

Best of thanks....

@cspsport5989 4 жыл бұрын

Thank you for your video .......

@steinbitb1636 5 жыл бұрын

thanks for video

@joefrancis5448 8 ай бұрын

U saved my reel

@zakistudios Жыл бұрын

thanks

@jonnasrelivo536 5 жыл бұрын

thank you very much bro

@J2J_Trini Жыл бұрын

Thank you appreciate the advice but you believe I put the sleeve in the wrong way first then saw this and its fixed now 😁

@JD-hs7ib 5 жыл бұрын

I have been working on my Bro's 2500 for hours now. Then I decided to get some help !!!!

@darmansyah9955 4 жыл бұрын

Perfect

@jamiepaskins4898 5 жыл бұрын

Thanks for that. Not to hard at all.

@badvibes501 10 ай бұрын

Thought my rod was broken 😂 finally got it to lock. All it took was arraning the spring to hold the little metal pieces 😂😂 wouldve never been able to do it without this video

@furkanozdemir508 8 ай бұрын

Thank you so much bro thank you ❤❤❤❤❤❤❤❤❤❤❤❤

@raimyabdul1395 5 жыл бұрын

Hi do you have any video on fixing Stella 2013 SW anti-reverse? Mind sharing?

@dustycustomlures Жыл бұрын

Is it possible to upgrade your reel from that regular anti reverse clutch to covered one?

@bassnazi4713 6 жыл бұрын

Man I look every time I click on a vid at the subs and am surprised every single time that you don't have over 20k subs. You really do piss off some of the stubborn fans apparently lol.

@TackleAdvisors 6 жыл бұрын

LOL.....it's not that..not entirely anyway lol :). The content I put out doesn't target the 13 to 17 year olds. Which are what the channels that experience explosive growth hone in on. 1.3% of my views are of that age demographic. Those in the 25 to55 year old bracket make up 80% of my views.....and they can't be bothered to click on a subscribe button....(I'm the same way :) ) However I do get more views than many of the channels out there with 20k, 30k, 60k. Which is pretty interesting, and encouraging. It's also cool that lots of the bigger youtubers. Turn to me for advise...lol

@bassnazi4713 6 жыл бұрын

Another great vid btw, kinda scary with all those little springs. Anyone with clumsy hands might should order a set to have on standby lol.

@TackleAdvisors 6 жыл бұрын

Thanks man! It gets brought up enough and there isn't really a clear concise way to go about it. Figured I'd pop one out there inbetween other projects

@bassnazi4713 6 жыл бұрын

Tackle Advisors exactly, it's a very informative channel, if the bass weren't starting to get ready to spawn I would send you my Antares DC MD to do a vid since I haven't gotten all my gear together to do so myself yet.

@kennywillems1 6 жыл бұрын

Needed this tutorial a few weeks ago 🤦🏼‍♂️👍

@NFL88 6 жыл бұрын

Ever explored any kind of hydropobic coating that can be applied own your own?

@ikashibimauler 3 жыл бұрын

I think he said rustolem never wet?

@zazante 9 ай бұрын

Question, reel was free cause i mess with the antireverse while cleaning the reel, so this video helped me fixing it. But now the antireverse is stuck in the normal reeling position but i cannot switch to the reverse, i really don't mind cause as many others i find it unuseful. But there is a problem with that? Shall I try to reasemble the antireverse or is ok like it is now??

@richardhardin191 3 жыл бұрын

Can you buy the spray coating?

@jesbergs 3 жыл бұрын

I love you... Thanks

@andryyanto6371 Жыл бұрын

Can I ask you. I have Shimano stradic fl C2000SHG and twin power 1000 and my planning is to do maintenance of them. But I'm not sure about the tools size to open the screws. Do you know what number of Wera hex should I buy?

@TheDanteBoots 3 ай бұрын

I know this is a long shot but do you know how to order the springs? My dad was re greasing his old 2006 stradic and lost one.

@dougnoble9931 4 жыл бұрын

Have fb spheros 8 and 10 k this slips any advice

@emiliopaolo610 6 жыл бұрын

I propose: stradic vs sustain and stella 18 vs exist 18!

@mhafishing1580 2 жыл бұрын

Good👍👍👍

@PeterWebber-tv7vh 2 ай бұрын

Is there a video for the stradic c3000xg I took mine apart and accidentally got into the anti reverse and don’t know how to put it back together. My looks slightly different than this video.

@gopro808 4 жыл бұрын

Were can I get a new anti reverse...I did this but it stops the opposite way when I reel....instead of reeeling freely the right way it tops that way and spins freely the other way

@marviccadabuna8287 3 жыл бұрын

the anti reverse of my shimano sahara fi gets rusty. i just cleaned it and apply sewing machine oil. any tips to prevent rust ?

@colourlesssky2754 Жыл бұрын

Thank you so much for making me realise how much of an idiot i am.. i nearly be done with spare parts 🤣

@lansiman 6 жыл бұрын

what lube do you use for the AR bearing? some lube make it slipped some not. there are saying that we shouldn't use grease on the AR but most baitcaster has their AR clutch packed full of grease out of the factory without any issues

@TackleAdvisors 6 жыл бұрын

Different designs....non shimano ar clutches can be greased. Best bet...run shimano's dry. and if you do lube..don't lube the top and bottom of the cylinders

@native9130 4 жыл бұрын

How can i get a anti reverse clutch for a sahara fi 4000?

@roughridergolf904 2 жыл бұрын

What if I cleaned it all put it back together and it now won’t turn very well?

@julianf.8028 6 жыл бұрын

Do you have any opinions or experience with the quantum throttle s30. It's on half price near me and looking to replace my 20$ quantum solo. The solo is pretty much the Qray

@TackleAdvisors 6 жыл бұрын

Looks to be a good reel for 30 bucks. Not sure what you can get that would equal it at that price. I'd say jump on it!

@julianf.8028 6 жыл бұрын

Cool thanks.

@BadSensation 6 жыл бұрын

Could you review the stradic ci4+? Love your videos man!

@TackleAdvisors 6 жыл бұрын

Thanks man! I plan on doing it....Just gotta wait on cooking and fishing to meet up to grab his stradic fk. Debating on if I should do the review on its own or break up the reviews of the ultegra, stradic, ci4+ sustain, exsence all separately. Or if I shoud just compare it to the ballistic lt that just came out.

@gameofman 6 жыл бұрын

Tackle Advisors you should review it together with other shimano reels like ultegra, stradic, sustain etc. and one or two daiwa with the same price range.

@TackleAdvisors 6 жыл бұрын

Honestly..it comes down to $$$$...Singular review vides with 3 4 5 6 reels takes 100 hours and $$$. For 1 video that gets 40k views over 6 months..(which wouldn't even cover the cost of the reels and return shipping to those who submitted them (which gets very expensive)...If i split some up....They'll all get XXk views...and i can go into more detail in a shorter period of time. A silver ballistic and saltist Back bay were promised by a local shop So i can kind of adjust the "spread" I kinda want to do a CI4 head to head with the Ballistic. And the Back bay is an aluminum ballistic....lol which is a stradic FK....SOoooo....the planning gets tricky...lol Especially when 400 parts are strewn about....which they are (at least 300 of them anyways....lol

@TackleAdvisors 6 жыл бұрын

I will also say I filmed the entire review comparing the ultegra, ci4 new sustain....and it felt clunky without the fk....SO I haven't posted it...

@BadSensation 6 жыл бұрын

Ah I see, that makes a ton of sense. Honestly whatever option is best for you is probably the best option for the viewers anyway! Super keen to see what you'll do!