Take Control of Your Lectric EBike: 11 MUST KNOW Settings!

Рет қаралды 95,854

Күн бұрын

Are you looking to take your Lectric Ebike riding experience to the next level? In this in-depth guide, you'll learn how to master the 11 custom settings on your Lectric Ebike, see how to unlock its full potential, and learn how to increase safety and comfort.
From adjusting the pedal assist levels, to fine-tuning the motor output, you'll see everything you need to know to customize your ride for any occasion. You'll discover tips and tricks, on how to optimize your ebike's performance for maximum speed, power, and comfort.
Whether you're a seasoned ebike rider or just starting out, this video is a must-watch for anyone who wants to get the most out of their Lectric Ebike. Discover the 11 custom settings that will take your ride to the next level!
0:00 Intro
0:17 P01 Brightness
0:34 P02 Units
1:07 P04 Sleep
1:27 P06 Tire Size
1:45 P08 Speed Limit
2:20 P09 Throttle Zero Start
3:18 P10 Mode Toggle
4:02 P11 PAS Sensitivity
4:56 P12 PAS Strength
5:32 P16 Odometer Reset
5:53 P21 Walk Mode
Amazon Affiliate links:
Sealant that has kept me flat free for over 200 miles, Slime: amzn.to/3JUPcPJ
My main camera, Go Pro Hero 8: amzn.to/3M4kSVG
360 camera, Go Pro MAX: amzn.to/3lVctZV
Microphone Adapter, Go Pro Mic Adapter: amzn.to/3Kku5aM
Microphone, Purple Panda: amzn.to/40LfhYl
My lightweight full face bicycle helmet, Bell Sanction: amzn.to/40PXcbL
Armored gloves, Fox Racing Bomber: amzn.to/3zopmP3
Updated version of my winter gloves Tourmaster Polar-Tex: amzn.to/3lPrzQF

Пікірлер: 194

@jackkeefe7531 6 ай бұрын

The best instructions for setting/programming an ebike controller display. Thanks!

@glong2720 9 күн бұрын

Awesome disclosure. Thanks for sharing

@MGR81 10 ай бұрын

THIS WHOLE VIDEO IS 🔥 🥵 REALLY thanks for all the time you took to make it 😊

@LectricGo 8 ай бұрын

Glad you liked it!!

@NarendraPersaud 4 ай бұрын

Great video! Much more helpful than the manual. Appreciate this content.

@I-Libertine 3 ай бұрын

Great video. Super helpful. Well done!

@Spacejunk63 4 ай бұрын

Thanks this is helpful, used the manual to setup but your video makes more sense.

@rgzrgz 10 ай бұрын

exactly what i was looking for. simple and example explinations of each parameter, ty

@LectricGo 8 ай бұрын

Glad it helped!

@mattwallen762 Ай бұрын

Great information and video, thank you.

@s1096cm2 Ай бұрын

very useful thanks man

@zachariahlee3393 11 ай бұрын

Outstanding comprehensive mode setting Video. Well done thanks.

@LectricGo 11 ай бұрын

Glad it was helpful!

@johnhcorwin 27 күн бұрын

Awesome vid. Thanks!

@catfish24 2 ай бұрын

Very good information and well done. Thanks for posting.

@ShivaFamilyGaming Ай бұрын

Great instructional video! This helped out a ton!

@michaelf1935 4 ай бұрын

Just got me bike today...This was just what I needed! Thank You Mate!!!

@LectricGo 4 ай бұрын

You are very welcome!

@SkullarkEcko 3 ай бұрын

How long did it take. It’s been two 13 days already for me.

@michaelf1935 2 ай бұрын

@@SkullarkEcko About 2 weeks. The problem now is the power to the controller will shut off after about 20 min of riding🙈

@matthewbond8874 Жыл бұрын

Good video thanks. I have both the 2.0 and 3.0 and was super helpful. Ride safe😊

@LectricGo Жыл бұрын

Thanks, you too!

@iapprove8392 3 ай бұрын

Great video. Thanks. It works for the display on my evercross ek6 as well. Well explained. Straight to the point.

@LectricGo 3 ай бұрын

Glad to hear it helps for other brands/models 👍🏼

@rogerfournier3284 3 ай бұрын

Just adjusted, very helpful thank you very much.

@LectricGo 3 ай бұрын

Great to hear!

@riverainventions 2 ай бұрын

Thank you...

@MyFunksta Жыл бұрын

Thanks what I needed to know I lost throttle control and pedal assist. Going to try going threw each setting you shared 👍🏾🚴🏿

@LectricGo Жыл бұрын

Sounds like it could be more than settings. Make sure all your connectors are tight.

@Jramos516 Жыл бұрын

Great video. Very helpful my friend.

@LectricGo Жыл бұрын

Thanks, glad you found it helpful!

@keznebula333 3 ай бұрын

Fantastic information for the Lectric ebike 3.0.😀 The original PA start off "kick" kept me off my bike for months; I'm going to try the different PA throttles!👏 That setting may make a "U-Turn" easier. Also, as I was walking my bike up a short hill of grass to the bike path (left hand on grip and right hand on seat) it got away from me! I didn't understand that putting pressure on the seat affected or engaged the PA. Very easy to understand instructional video, THANK YOU!

@lindagoss5919 3 ай бұрын

I have same problem with the “kick” . Would be Interested to see if you figure out a solution. Please post your results. Tia

@stevecuthbert8856 11 ай бұрын

Great information.

@LectricGo 11 ай бұрын

Glad it was helpful!

@nancydemarino4105 5 ай бұрын

thank you

@jesslipps23 Жыл бұрын

Hey, thank you so much for this. I'm awaiting delivery on my XP3.0 and was worried about all the settings I keep hearing about in the forums. Can't wait to get mine and get started!

@LectricGo Жыл бұрын

You're welcome! Settings are fun to experiment a bit with to make the bike feel better tuned to you.

@irvingjenkins7100 11 ай бұрын

Hey buddy great job on break in down the modes 👍🏾🚴🏾‍♂️👍🏾✌🏾😎🤴🏾✌🏾👌🏾😁😎🤪🚴🏾‍♂️

@LectricGo 11 ай бұрын

Thanks 👍

@thegremlincat6526 7 ай бұрын

Very useful thanks and what about options 5, 7 and the rest not mentioned, what are those for?

@NintendoSilver 5 ай бұрын

wow this is super helpful. I just bought fat tire dirt bike and doesn't really feel comfortable with the original setting. But with your setting, I feel like a bird 😁

@pedromorales924 Жыл бұрын

I'm getting mine's Tuesday and I'm so happy I will let you know how's the ride.

@LectricGo Жыл бұрын

Congrats! I'm sure it will be lots of fun 🤩.

@JHOFF111 11 ай бұрын

Ive tried tire size at 20, 23, and 24 seems 23 and 24 are showing faster then my speedometer app on my phone. Not sure what is truly correct. I think the default setting at 20 may be most accurate, idk for sure

@LectricGo 11 ай бұрын

I tried recalibrating with speedometer app but the problem with a lot of GPS apps is that they bounce a lot. I also found that the XP 3.0 display reading varies if you pedal vs using throttle only. As long as it's close, I'm mot stressing about it :)

@jazzid45 Ай бұрын

Thank you so much i needed this info . Do you have all seetings of the display?

@michealculleton1159 8 ай бұрын

😂😂 great video well explained pluss no horrible background music

@LectricGo 8 ай бұрын

Thanks...music is usually a bad idea as musical tastes are all over the place :)

@jonb2613 9 ай бұрын

There are 2 more settings not mentioned. P3 which by default is 48 but I have no idea what that setting affects. P22 which by default is 0. When set to 1 you have FULL range of throttle on all PAS levels

@nitebeest 9 ай бұрын

P3 is 48V Voltage. The selection settings are 24V, 36V, and 48V. This shouldn't be changed unless advised by an authorized rep.

@LectricGo 8 ай бұрын

Do you have the newer PWR controller? Setting 22 is not adjustable on older versions of the XP 3.0 controller like the one I have.

@7stringst3r 6 ай бұрын

Thank you man very helpful

@deborahsimpson4968 2 ай бұрын

What setting will allow me to distance travel while riding and maintaining charge on the battery with solar and a mppt booster?

@cornbread70s4 7 ай бұрын

Awesome video!!! Thank you! Stupid question, but my wife just bought me the XP Lite, and the class 2 speed setting cannot be bumped up to class 3 28mph. All other settings you recommended were adjusted. Is there another way to bypass or am I sticking at 20mph?

@TheHappyDIYGuy-ri8nb 3 ай бұрын

Do you know a setting that deal with throttle, mine seems to lag or rev up before kicking in?

@Des2740 6 ай бұрын

Hi great video I have a keteles k800 and I just disabled the throttle till I get use to it it takes of very fast and it is so easy just to flip the throttle by mistake do you k ow what setting 15 is I changed mine by mistake and it’s at 39 I think yours in the video is at 40 ?

@martyjenkins3631 Жыл бұрын

Thanks for trying these out, so I don't have to. I think the P11 setting--for PAS sensitivity--may count the number of magnets on the foot crank passing a spot before starting the motor. So, how much of a circle do you pedal before getting help, measured in about 30 degrees each?

@LectricGo Жыл бұрын

That makes sense. Set at 24 it did take approximately two full turns. Set at 30 degs, 12 magnets x 2 turns would equal 24.

@darkhorse2reign Жыл бұрын

Great vid. How do you change the TRIP A/B settings?

@LectricGo Жыл бұрын

When the bike is on, you tap the power button to scroll through the different mileage, voltage, current and time indicators.

@Archont4000 5 ай бұрын

Thank you! It is strange to me though that showing the clock is not an option

@tenncutt Жыл бұрын

Where did you get the bike stand? Very good video

@LectricGo Жыл бұрын

It's a rear motorcycle stand, given to me with a past bike purchase but Harbor Freight and Amazon have similar ones. Search for "adjustable rear motorcycle stand". Here's one from Harbor Freight: www.harborfreight.com/low-profile-rear-motorcycle-spool-stand-99701.html?campaignid=12144811130&adsetid=117789318878&product=99701&store=417&gclid=Cj0KCQjw2v-gBhC1ARIsAOQdKY2L3UE87ouFaSBpth2dtmxCGwDSbMw-ZKoHRV8r5za-9OhcWnE5pJgaAl0dEALw_wcB

@donbobness 9 ай бұрын

Thank you for this very informative video loved it Bob

@LectricGo 8 ай бұрын

Glad it was helpful!

@alejandrosazo263 3 күн бұрын

thanks this is a great very helpful video, a question, how can i regulate the speeds of each pedal assisted mode, like if i want PAS 1-11m/h PAS 2-17m/h etc?

@shaynicholas22 Жыл бұрын

Thanks bro super helpful

@LectricGo Жыл бұрын

Welcome 👍!

@jamesrobinson4769 5 ай бұрын

Does the speed setting work in cruise control one

@johngildein7084 5 ай бұрын

Isn’t there an adjustment that you can set speed perimeters for each PA level? I’ve done this on my older Lectric 2.0 but now I have a 3.0 and I need to make those changes also.

@kennethpaschall6811 6 ай бұрын

Do you know if you can find the information for the movcan v30 or respond with a link to the p settings list and information because i want to get that one

@truittbodie249 2 ай бұрын

Can you tell us what bike stand you have that works well with the e-bikes

@woify9304 4 ай бұрын

On my bike when I use the throttle it gives me power but when I pedal it dose not give me power and I have the mode on the display set to be able to use the throttle and pedal assist do you know why my pedal assist is not working?

@user-lw8gg9kh6u 10 күн бұрын

Is there a way to get full blast speed from a standstill and be in pas #1 or would it be limited to the pas #1 setting

@edwinnunez7156 4 ай бұрын

How do I turn on the front light and back lights

@grumpykat2909 11 ай бұрын

Thanks for the video. I trying to decide between the Standard or the Step Through (ST). I know the ST pedals are lower. Since you have a ST, have you had any issues with pedal strikes on the ground especially on turns?

@LectricGo 11 ай бұрын

I have had some pedal strikes when attempting to pedal through turns. I've learned to stick mostly throttle on sharper turns.

@matthewhaygood1825 4 ай бұрын

When I get to p16 what do I do to reset the mileage

@rjgragg1476 11 ай бұрын

How do you engage cruise control when riding. Also I can't move controller to the next setting so I can set mileage to miles /hour

@LectricGo 11 ай бұрын

What bike are you riding? XP 3.0 or a different model? On my XP 3.0 you hold the throttle at a steady position while pressing and holding the "-" button on the left control pad until "cruise" is indicated on the display.

@marcelobotrel 27 күн бұрын

Hi, amazing video! Quick question: is it possivle to adjust throttle intensity? I believe mine is very sensitive and its taking off too fast. Thank you!

@LisaLightning Күн бұрын

On mine, The throttle barely works on PAS one, it works a little more on PAS two, and for the higher modes it works very swiftly. I asked the company about it and they said that's just how it is. So I'm looking at how to change the throttle setting, there has to be a way.

@DavidWellsBootBoss 11 ай бұрын

I appreciate this info I was considering this bike till I saw you can't do 100% throttle in class 3 mode

@mikemaher6375 10 ай бұрын

Yes you can.

@Mark-pl8my 10 ай бұрын

No you can't. It goes 20mph

@mythoti 9 ай бұрын

@@mikemaher6375how? I only plan on buying this if I can find information on how to

@1337Easybake 8 ай бұрын

P22 set to 1

@philcangametourtv 4 ай бұрын

Hi how to unlock speed limit..

@FubarMike Жыл бұрын

Is it absolutely necessary to modify these settings? Are the default settings safe and usable out of box or will I have to adjust something?

@LectricGo Жыл бұрын

Out of the box settings are safe and useful. Most people do unlock to class 3 to be able to hit 28mph though.

@chip9832 8 ай бұрын

Class 5...warp speed unlocked

@LectricGo 8 ай бұрын

😆 🚀

@maini-lasvegaslivin8258 6 ай бұрын

Do you know what im doing wrong or need to do when i go to my p08 to make it faster its at 32 and im trying to get it to 100 but when i press the plus botton the number 32 just blinks?

@Flo_Grown_Kid 5 ай бұрын

If u have the xp lite, you can’t unlock it to 28 mph

@BobCurrie-i1c 25 күн бұрын

P3 is set for 36 volt and it has a 48 volt battery..would this be why the volt meter doesn't work?

@TheBiggk101 Жыл бұрын

Thanks for the video now it seems that my pedal assist won’t engage and my throttle will not engage?

@LectricGo Жыл бұрын

Check all your connectors. Push them in and make sure they are tight.

@lucky7mojo 4 ай бұрын

New display , harness, and controller. Bike working, but motor cuts out, then winds back up to fast, then hesitates/ cuts out, then right back on....HELP

@Upnorthyooperman 4 ай бұрын

My controller has no power.Do go to 9 to activate it?

@StonebrakerDoesStuff 10 ай бұрын

Can u edit the pedal assist % on each level of pas?

@LectricGo 8 ай бұрын

That level of customization is not available on the current controllers as far as I know.

@lincolnbrown7010 9 ай бұрын

How dou you set the automated to show faction of miles

@LectricGo 8 ай бұрын

Unfortunately you can only see whole miles.

@walkerworlds274 Жыл бұрын

question what brakes or brand come on the bike and can you put hydraulic brakes on it. thank you for any help.

@LectricGo Жыл бұрын

The brakes aré unbranded mechanical brakes. It does appear there are hydraulic retrofit options that include the ebike cutoff switches. I will upload a video on the topic if I decide to upgrade. May only do the front.

@robertsalters9645 Жыл бұрын

@@LectricGo All 3.0's are not eligible for the hydraulic brake upgrade kit, free of charge from Lectric.

@clintonbloodworth9225 Жыл бұрын

What does TM stand for on the odometer?

@LectricGo Жыл бұрын

Tripmeter

@larrybennett6534 3 ай бұрын

I have both 2.0 & 3.0 in LR ST. I am extremely disappointed with my 3.0 not being able to have full throttle on assist level 1 or 2. I would teach people to take off with the throttle then pedal. But now the 3.0 has to be on pedal assist 3 or higher to get the throttle to go full. SO now when you take off in level 1 or 2 the bike has very little power, 2 amps in level 1 to get going with the throttle. It almost gets stick in the grass, its got no take off power anymore. Nothing like the 2.0. I like a new ridder to start out on level 1. Not have them flying on level 3 when they start peddling just staring out. There is no way to change this throttle problem. I talked to Lectric & was told the new controller PWR can not be changed to get full throttle in level 1 or 2 anymore. Has to be on level 3 or higher. This just bites! Setting 23 to #1 does not change the throttle power on assist level 1 or 2. Had my 3.0 for 2 days & looks like I will be selling it. Yes the 3.0 bike rides better than the 2.0 but the new controller bites on the 3.0. Lectric's new "ONE" bike you can change this but that is the only bike you can change the throttle response on level 1 or 2. Unless you bump to level 3 or higher, when you take off with the 3.0 bike it is now ballsless. Same for coming to a hill in level 2. Hitting the throttle does nothing! You have quickly bump to assist level 3 so you have throttle control. This just bites.

@LectricGo 3 ай бұрын

I just got an email from lectric about how to get the PWR programming on my XP3.0. I usually ride in PAS 3-5 so I'm going to try it and report on my findings. I have seen several comments like yours with some not liking it much.

@larrybennett6534 3 ай бұрын

@@LectricGo "Not liking it much" boy that is an understatement, lol. If you find a way to get this throttle fixed/reprogramed please please let me know. (before I just sell it) . Love my 2.0 it's a brute compared to this 3.0. Lectric told me they are going with this new controller, "sorry you don't like it you can't change it". I rode 15 miles today. Throttle is so non responsive even in level 3. It has to be in level 5 to get somewhat full throttle. This bike is a dog. This 3.0 can't even do donuts tehee this 3.0 is a boat anchor compared to a 2.0. Thanks for your reply, signed "desperate to get my throttle back"

@AmerQuin 2 ай бұрын

Like you, Larry- I had two 2.0’s- and not happy with our two new 3.0’s- for the reasons you mentioned above. I hope someone figures this out soon. (Or maybe, Lectric can issue a firmware update to fix this.)

@LisaLightning Күн бұрын

Me too! I just figured out yesterday on my second ride about this problem with the throttle. I had a Lectric Lite and the throttle was unrestricted on all modes. I had no reason to think the 3.0 would be different. I like to ride in mode two, and the throttle barely works at all! This is crazy and I hate it! I'm really angry about it actually, they just wrote me back that I can't change it and I wrote them back a really angry email. Everyone should! I told them it was false advertising!

@Crisinator 11 ай бұрын

Hello, i have the ouxi v8 with a m5 display but cant change the settings for the pas sensor. is there a way to unlock all settings of the screen? THANKS!

@LectricGo 11 ай бұрын

I'm not familiar with that bike but not all models that use this display will have the same settings available. It depends on how the manufacturer sets up the motor controller.

@Crisinator 11 ай бұрын

@@LectricGo thanks for reaction, so it's isn't possible to unlock all setting.

@stepbackjack4194 11 ай бұрын

Don't forget the sequence to save and exit programming.

@akilmoore Жыл бұрын

Why do I have to pedal mine before the motor will kick in for either pedal start and throttle?

@LectricGo Жыл бұрын

Check that P09 is set to zero and check any connectors coming off of the throttle are tight!

@mobiusgaming781 9 ай бұрын

Have you figured out how to unlock the speed for Throttle? Cause unlocking it as a Class 3 ebike is only when you're pedaling, otherwise you get stuck at 20mph throttle

@nitebeest 9 ай бұрын

I'm pretty sure throttle is pegged to 20 mph regardless of class. Though with PAS 5 and class 3, 28+ mph should be pretty easy to achieve.

@mobiusgaming781 9 ай бұрын

@nitebeest Yes, but from what I've seen, even when you put it into PAS 5 completely unlocked, the throttle will still do 20mph max, it only gives more power to go 28mph+ when you pedal,.. and was asking if there was a way to have the same 28mph+ on the throttle

@nitebeest 9 ай бұрын

@@mobiusgaming781 I meant with pedaling, 28+ should be doable. Throttle seems to be set at 20 regardless of class 2 or 3 and PAS settings.

@LectricGo 8 ай бұрын

Unfortunately that is not possible with the stock controller. :(

@audiwankenobi361 11 ай бұрын

What about all the other settings that were skipped? Do you know what they are?

@LectricGo 11 ай бұрын

The skipped settings are either locked out or not recommended to be adjusted as they relate to things such as battery voltage which is "fixed".

@Dlo_BestLife 2 ай бұрын

My Lectric XP has 22 settings and #22 CAN be changed! ~ Anyone figure out what it is yet? PWR?

@LectricGo 2 ай бұрын

I'll be getting PWR soon and will be able to confirm.

@chrissolari3280 8 күн бұрын

I can’t change my #8 setting up or down. I have the basic model.

@stevenordoutdoors 10 ай бұрын

Whats 22p on lectric 3.0 mine can be 1 or 0?

@LectricGo 8 ай бұрын

On the newer controllers this appears to be related to letting you use full throttle in any PAS mode. My controller does not have this function.

@phonsobroadie2299 Жыл бұрын

Hey just getting my bike and what if my bike flash on and off?

@LectricGo Жыл бұрын

Make sure the key underneath is turned to the on position!

@babyangelobeats 9 ай бұрын

Can’t figure out how to adjust setting 11 or 12. Won’t let me change the numbers of sensitivity

@LectricGo 8 ай бұрын

Do you have an XP 3.0? Other Lectric models may not allow these adjustments.

@howardbodiford7130 Жыл бұрын

How do you turn the lights on ?

@LectricGo Жыл бұрын

With the bike on, hold the + button for a few seconds.

@Metaljunky90 9 ай бұрын

i want to know where i can get that stand

@LectricGo 8 ай бұрын

Here you go! amzn.to/3IcxqHD

@errolbartholomew8770 10 ай бұрын

Can you set the XP 3.0 to read in tenths of a mile on the odometer?

@LectricGo 10 ай бұрын

I do not believe there is a way to do that unfortunately.

@mikemaher6375 10 ай бұрын

The trip meter reads in 10th s.

@nitebeest 9 ай бұрын

Push the power button one time to switch to TripA. That will show up to tenths of a mile.

@gusvilla8264 10 ай бұрын

How do you go back to class 2?

@LectricGo 8 ай бұрын

Set P08 back to 32.

@lucky7mojo Жыл бұрын

for sensitive eyes, use the secret setting. Rotate entire display light down on handle bar, til you cant see it at all.

@LectricGo Жыл бұрын

😆

@yestershire13 9 ай бұрын

What are settings 13,14 and 15 for?

@LectricGo 8 ай бұрын

Any settings not in the manual and not covered here are not user adjustable. They are settings for things like battery pack voltage which you cannot adjust for the motor/controller combination that come stock.

@demonic7610 7 ай бұрын

Watch out Lectric will send it as class 3 which in some states requires a license to drive unlike class 2. it is based on state laws which require mentioning of max speed. mine came labeled as class 3 with top speed mentioned fighting your not using it as class 3 is impossible to prove.

@chuckie5671 Жыл бұрын

I'm waiting for my Lectric trike to be delivered but, top speed they say is 14 mph. Can I change a setting to make it go faster?

@LectricGo Жыл бұрын

I will be ordering the XP Trike this week and will be able to experiment with it soon. My understanding, however, is that trikes need to be limited to much lower speeds. They become unstable in corners at high speeds. I don't expect the ability to unlock higher speeds.

@DM-fp8uw 2 ай бұрын

Any info on Trike setting P8. Can you increase speed.?

@chuckie5671 2 ай бұрын

@@DM-fp8uw Haven't found any info on that. The P8 setting doesn't increase speed.

@barbforrest6026 Жыл бұрын

You missed one setting I think. I read there is a passenger mode setting that limits the speed to 10 mph

@LectricGo Жыл бұрын

I decided to leave that setting out because it can't be turned on through the settings menu. It is activated outside of the menu by holding the minus and power buttons at the same time.

@ember-x9o 4 ай бұрын

My throttle does nothing? I’ve tried changing 10 to different settings and still nothing…

@Funcentric Жыл бұрын

Thanks but what about p setting 22?

@tomkemmerer 11 ай бұрын

My ? Also

@LectricGo 11 ай бұрын

These settings are for the XP3.0. P22 is available on the trike and I set that to "1" to allow for 14mph top speed in PAS 1-5 on the trike.

@Funcentric 11 ай бұрын

@@LectricGo I see. Cool. Thanks.

@whoaaanelly65 11 ай бұрын

I just got a pair of 3.0 extended range walk through bikes, and today was our first ride. We were both wanting to try minimal PAS #1, but it kept "crow-barring" the max speed - coasting downhill or not - to 9mph. This meant either no assist or PAS-2 or higher for the entire ride. I came to find PAS-0 on a flat very tough, because the bike is so much heavier than I've ever ridden. Suffice it to say, I was slightly disappointed with my first ride. I basically used 60% of the battery on a flat 22 mile ride. I remembered watching this video as we waited for the bikes to arrive and watched it again and didn't see a setting to address this issue. I then looked at the manual and it shows a P22 setting which will turn this "PAS 1 and 2" governor OFF allowing for full speed on both - up to the P8 setting max, for like coasting downhill, etc. I just found this in the manual and this comment section of this video, so fingers crossed on my next ride it works. I'm still not sure if there is a cut-off on the electrical assist for each PAS level and what they will be, but having it resist your speed means it has to use power to do that too. Don't want that! Hope it works!

@KamotoSam 2 күн бұрын

Damn there's no way to control the max speed for each pas level? Like for example Pas1: 6mph Pas2: 9mph Pas3: 12mph Etc etc or however you want to do it?

@LisaLightning Күн бұрын

Why would you want to? I actually enjoy riding in PAS two and going 18 mph. It's better exercise. I was happy they allowed me to decouple the speed from the mode. On the other hand I'm really angry about the throttle working different in each mode.

@laurenjackson5045 11 ай бұрын

How do I get my bike back to 20miles an hour

@LectricGo 8 ай бұрын

Set P08 to 32.

@garywillhoit 11 ай бұрын

To use walk mode more safely ,have bike in gear 1 pos 1. Otherwise it walks more like a run.

@LectricGo 8 ай бұрын

The hub motor drives the wheel directly without going through the gears. I'm curious to check if PAS level has an effect though....

@garywillhoit 8 ай бұрын

True for Lectric premium. Not a hub drive.

@paulpeterson5214 Ай бұрын

----- I can see a night riding problem with that bright white display wiping out your night vision. Am I wrong?

@LisaLightning Күн бұрын

Definitely set it to the dimmest mode.

@X-GamerPro-HD 10 ай бұрын

I made my bike go super fast but my speed is not going up. Do you know what to do?!?

@LectricGo 8 ай бұрын

Some owners have had to ask Lectric for a new display. Try to push on all the connectors to make sure they are tight.

@robertpurcell7862 5 ай бұрын

Up and down buttons don't change the numbers on the dashboard

@98silverado 10 ай бұрын

I just unboxed mine it's 3/4 battery life. The throttle won't work. The screen is on . Every thing looks plugged in. I'm pissed. Lectric is closed till Monday

@LectricGo 8 ай бұрын

Did you get things resolved?

@98silverado 8 ай бұрын

@@LectricGo yes . The peddle assist was on zero. Once I put it up it worked fine. Thank you

@kyleocampo8874 10 ай бұрын

My throttle not working I just got it yesterday and nothing 😊

@LectricGo 10 ай бұрын

Check the connectors for wire coming from throttle. Press them hard together.

@Someoneeeeeoeofjg 6 күн бұрын

I only have 4 settings on my bike

@rehannasir1891 14 күн бұрын

My wont get pass settling number 4

@artskiwendy 11 ай бұрын

Now does it come from the factory? I not a computer lover...and just let it the way it came.😮

@LectricGo 11 ай бұрын

Leaving it the way it came is safe and should work fine for most.

@memsitoab Жыл бұрын

Isn't there a cruise control setting?

@LectricGo Жыл бұрын

This video is about the custom settings menu. Cruise control is a standard function that doesn't require you to go into the settings menu. For cruise control, hold the minus button for a few seconds while maintaining a steady throttle position.