Tamiya CC-02 Wheelbase Adjustments

Рет қаралды 19,665

4 жыл бұрын

Be sure to watch the following video with additional insights: • Tamiya CC-02 Wheelbase...
The CC-01 chassis original wheelbases: 267mm / 252mm / 242mm
CC-01 Bodies:
Short wheelbase (242mm):
49490 Mitsubishi Pajero Metaltop Wide
57701 XB Mitsubishi Pajero Rally Sports
57782 XB Mitsubishi Pajero Metaltop Wide
57815 XB Mercedes-Benz Unimog 406 Series U900
57818 XB Ford Bronco 1973
57843 XB Mercedes-Benz Unimog 406 Series U900 Orange version
58132 Mitsubishi Pajero Metaltop Wide
58141 Jeep Wrangler
58152 Isuzu Mu
58166 Isuzu Mu Type X
58249 Mitsubishi Pajero (never released kit version of 57701)
58457 Mercedes-Benz Unimog 406 Series U900
58469 Ford Bronco 1973
58579 LandFreeder
84071 Jeep Wrangler
Medium wheelbase (252mm):
57810 XB Toyota Land Cruiser 40
58445 Toyota Land Cruiser 40
58564 Toyota Land Cruiser 40 Black Special
Long wheelbase (267mm):
57877 XB Toyota FJ Cruiser
58178 Honda CR-V
58324 Volkswagen Race Touareg
58588 Toyota FJ Cruiser
#tammiyacc02 #tamiyacc01 #cc02g500

Пікірлер: 64

@michaelstewart3042 4 жыл бұрын

Looking good as always some of the best scale cars on the planet

@Matteomeier 4 жыл бұрын

Thank you Michael! 👍😊

@lr2648 4 жыл бұрын

Wieder einmal ein tolles & informatives Video von dir. Damit würde ich mit dem Landrover D90 und dem CC02 Chassis liebäugeln. Danke!

@Matteomeier 4 жыл бұрын

Danke! 👍😊

@chrisfort7340 Жыл бұрын

Excellent video! Thank you sir!

@GastonMaqueda 4 жыл бұрын

Thank you Matteo. I was waiting for this video

@Matteomeier 4 жыл бұрын

Thanks for your fine feedback! 😊👍

@ShenRC 4 жыл бұрын

👍 Great info Matteo!

@Matteomeier 4 жыл бұрын

Thanks Steve! 🙏👍😊

@SkansmanRC 4 жыл бұрын

Nice, Thanks for info Matteo 😊👍

@Matteomeier 4 жыл бұрын

Thanks Skansman! 😊👍

@kazacorpora 4 жыл бұрын

j'adore , une super idee cette comparaison , de bonnes explications , merci

@Matteomeier 4 жыл бұрын

Merci mon ami Kaza! 👍👍😊

@JohnDoe-ss8ec 6 ай бұрын

Thank you! I am looking to shorten CC 02 to fit a sand scorcher body, however the sand scorcher I think is 250mm

@HarmanMotorWorks 2 жыл бұрын

Great video! Nevermind about the Pajero body (because it has IFS in real life), but if the Defender body fits the CC02 then that is perfect 👍👍

@Matteomeier 2 жыл бұрын

Tamiya will release the Defender on the CC-02 chassis... tamiyablog.com/2021/09/tamiya-58700-land-rover-defender-90-4wd-cc-02/ Sould be relesed soon..

@mikeymike3240 4 жыл бұрын

Hi Matteo, great informative video, very useful information man. 😎🎩👍👍

@Matteomeier 4 жыл бұрын

Thank you Mike! Be sure to watch the following video with more infos! kzfaq.info/get/bejne/qcylrKRjuq7aqIk.html

@NordicRC 4 жыл бұрын

Thumbs up, Matteo. Excellent information and demonstration. I need to check the Land Cruiser and Landfreeder’s wheelbase now. Could be interesting if they could fit the CC-02.

@Matteomeier 4 жыл бұрын

Thanks! 👍👍😊

@rafaelcid 4 жыл бұрын

Very educative video!!!

@Matteomeier 4 жыл бұрын

Glad you think so! Thank you! 👍😊

@RCACTIONAUSTRALIA 4 жыл бұрын

Great info 😎

@Matteomeier 4 жыл бұрын

Thanks! 🙏 😊

@bpscrawlerrc7675 4 жыл бұрын

Very nice video man 😉👍

@Matteomeier 4 жыл бұрын

Thank you! 👍👍😊

@RCtime 2 жыл бұрын

Very good video 👍 Very useful 👍

@Matteomeier 2 жыл бұрын

Thanks, glad to hear this! 👍👍

@seth8005 4 жыл бұрын

nice tutorial video!!! I belive the only big issue(sort of) for me is the rear body post mount(holes) if you want to fit your original/existing old CC-01/CR-01 bodies on CC-02 chassis , the length between CC-02 rear post(holes) is about 10mm wider/longer than CC-01, and the pole position are slightly backward compares to CC-01.

@Matteomeier 4 жыл бұрын

Yes, of course the body posts have to be modified or new made. In my opinion it would be the best way to not use the existing holes. Better to use magnetic holders and close the holes.

@WorldControlRC 4 жыл бұрын

Great video :) Also very well explained for me :) I urgently need a G500 with a MST CMX :D

@Matteomeier 4 жыл бұрын

Thanks! This is also a good idea! 👍😊

@simonyoung6120 4 жыл бұрын

I agree with Bob Martin.. You can swap the mounts from side to side diagonally .you loose about 5mm which would give you what you need. the parts have numbers on them.the link is off set from the mounting holes. New video needed.

@Matteomeier 4 жыл бұрын

Yes, new video already here! 👍👍😊 Thanks!

@PhoenixRCCrawler 4 жыл бұрын

Good info. Thank you. 👍🏽🐒🇺🇸

@Matteomeier 4 жыл бұрын

Thanks! 🙏 😊

@michaelthomas3262 4 жыл бұрын

clever - und tolles Video :D

@Matteomeier 4 жыл бұрын

Vielen Dank Michael! 😊

@CarminesRCTipsandTricks 4 жыл бұрын

I very much liked that information Matteo!! I still wish I could afford a CC02... 😞 I'm thinking, maybe Tamiya DESIGNED the latest CC01 Bodies in 245mm and 255mm - in readiness for the upcoming CC02 Chassis! It makes sense. 😉 Carmine ✈🚂🚙

@Matteomeier 4 жыл бұрын

Thanks Carmine! 😊

@b08m4rt1n 4 жыл бұрын

Matteo, could you swap the rear link mounts side to side so the arm mount points are closer to the gearbox and get an even shorter wheelbase?

@bakko9302 4 жыл бұрын

I was thinking the same thing :) :) A ton of more wheelbase options if flipping the linkmounts :D

@Matteomeier 4 жыл бұрын

Yes, you're right, that's why I made a second video: kzfaq.info/get/bejne/qcylrKRjuq7aqIk.html Thanks! 😊

@Matteomeier 4 жыл бұрын

Correct, I made a second video about this... Thanks! 😊

@milhouse8166 Жыл бұрын

Thank you for this very helpful video. I found a short wheelbase cc02 for a good price and I am thinking about buying it, but I have a quick question. Could it be made into a long wheelbase without modifications? (eg. changing links, driveshaft, etc) Thank you.

@Matteomeier Жыл бұрын

For this you will need a longer drive shaft.

@SuperGoldwingman 3 жыл бұрын

Great video, thank you. Can you recomend a chassis or adjustment for 260mm or 10.25 inch. I have a cool Alfa Romeo body I want to make a 4wd rally car.

@Matteomeier 3 жыл бұрын

Thanks! If so, you need to adjust the wheelbase by edit the length of your links. Because the CC-02 have rigid links you need complete new ones with a thread and so adjustable length.

@rantoanggiatph8643 3 ай бұрын

Hello Matteo, can we upgrade Tamiya Chasis CC02 to CC02?, would you help me?

@musoseven8218 3 жыл бұрын

Very clever! Brilliant! I'm just puzzling if a hard body D90 would fit (but isn't the wheelbase on those was 313mm though? Maybe the Tamiya D90 is smaller, there are variations in scale?).

@Matteomeier 3 жыл бұрын

D90 should have less than 313 wheelbase. Defender 110 should have 313 or a bit more. kzfaq.info/get/bejne/eq5mm7GH2p-1cqM.html

@EugeneRCDrezgalovo48rus 4 жыл бұрын

Красивые модели!!!!💪🇷🇺👍

@Matteomeier 4 жыл бұрын

Большое спасибо! 🙏

@500Hun Жыл бұрын

Hi Matteo ! How to make 280mm long wheelbase from 267mm cc-02 ? Any idea ?

@Matteomeier Жыл бұрын

You need to build the links yourself, possible with tubes and threaded shafts. But you will need rod ends for mounting.

@500Hun Жыл бұрын

@@Matteomeier Thank you.

@NASH8331 3 жыл бұрын

I was changing my CC02 wheelbase to 245mm, but the body post still in 242mm. Dose anyone know this?

@Matteomeier 3 жыл бұрын

Yes, maybe you have to move the body posts also. Normally it's enough to change a bit the angle of the posts.

@deusexaethera 4 жыл бұрын

_[sits down and listens to Matteo's latest RC movie while cleaning a nitro engine]_

@Matteomeier 4 жыл бұрын

👍 Good to hear! 😊

@nighthawkj30A4 4 жыл бұрын

Where’s the Honda CRV body??

@Matteomeier 4 жыл бұрын

I sold it! 😔😔

@nighthawkj30A4 4 жыл бұрын

Matteo's RC Movies aww man think that body to Tamiya doesn’t make it or even have it anymore either. Well hopefully they re release it.

@rantoanggiatph8643 3 ай бұрын

I'm sorry, I mean, CC02 to CC01..