Thanks for the video. Bought my 5 year old a x-pro 125 atv. After less than 3 hours on it, the clutch went. I had to wait 2 weeks for the clutch tool to come. So I recommend ordering it with the clutch.

this was very helpful. I'm going to get a new clutch, gasket & that special socket on order so I have it when we need it.

Thank you. Very helpful. Add more content please.

I got to have one of those impact screwdrivers. Nice.

Thanks for the video. I bought our granddaughters a Coolster 125 four wheeler for Christmas a couple years ago. They rode it a lot. It sat up for five to six months. Battery died, carburetor clogged up so I took it to a Ace Hardware that sells them and got it running. New battery new carburetor. Technician said it wouldn’t shift into gear and they could not / did not want to get into the repair. The 4X4 is like new and well cared for except for setting up all those months. Any idea on what the shifting issue could be. I’m mechanically inclined, and can most likely fix if not to difficult.

Thank you for your video .

That’s a bad ass screw driver!

I had to replace that uga duga lol thanks i think i need one

One more uga duga did it. I gotta fix one like this for my son he’s had for many years. Thanks for showing how to do it.

You nice guy thanks Good explain

Good video 👌👍😀

Great little video buddy! Strong work! Only question i have is how to adjust that clutch, I had the adjustment screw all the way in. Now with a new clutch in there, do I just back that puppy off a tad? Thank you

Hey do you know how to adjust the clutch? Mines wearing out and needs to be tightened

Do you/can you adjust the clutch?

i’ve seen some clutches have a pin with a spring that you out into the middle the rod that the clutch goes on. Is this on all the clutches?

I have a new 2021 tao and the clutch makes a rattling sound when taking off is that normal

What size clutch tool did you get? I see different sizes on Amazon.

A friend of mine just bought a quad for his daughter and it won’t move are these clutches adjustable?

Where did you get the clutch and whats the size

Not sure if it’s my clutch but it runs and drives After it warms up it starts acting like it’s kicking in and out of gear is that the clutch?

My son has a 125cc toatoa go kart. It works great in the forward gears but grinds badly in reverse. Would replacing the clutch fix that issue? Very helpful video you made.

Hi, when you installed the new gasket that goes between the case and the cover did you install it dry or with gasket sealant?

Mine starts acting up after ~30 minutes of riding. Symptoms are close to no power in forward gear but reverse always has plenty of power. Problem goes away after cool down. Clutch? I was told could also be rear axle bearings. Idk. Would like to hear your thoughts.

Is this the same as the RPS 125cc atvs?

Hi I bought a new 110cc atv , its reverse is very powerful but it's drive is very weak . Can u please help me out😭

Is this a semi or full automatic clutch.

need size for 125cc cheetah tao 2012 i got ine for free got her running and everything just need a new clutch kr how to adjust it cause it drives also think put and hand shifter

We tried to remove clutch like this, however our clutch keeps spinning when using the tool, how do we stop it from spinning to get nut loose?

Hey fella, I'm pretty sure I have the same wheeler, does yours have forward and reverse? Also what " tooth " did you need to order

I have a 4 wheeler exactly like that one.. but I can't tell in which gear is and won't turn on because is not in neutral. What can I do to fix this issue.. will replacing the clutch fix the issue?

So me and my wife got m our kids one of these and when you put n it in gear that thing just spins.. Do you think this is the problem with ours too

Comment part 2: You should do a clutch adjustment video.

Great video - Thank You ! Does anyone know how i could attempt to fix/rebuild the clutch (vs replace) ? Also, on my 2nd ATV, what could I do preventative care or maintenance to make it last longer ?

Could this be the problem my won’t drive front and back? Like it turn on but it won’t drive/move.

I have a 125cc 2010 coolster tab and when I turn it on it will go fast for like 10 minutes and when I turn it off and ride it again alter it will barely even move in drive but in reverse it goes fast

The cluch grinds putting in reverse and downshifting from 3rd

What’s the actual name of the arm

I bent the locking tabs out and that nut absolutely wont move at all. Any tips

Is this for all 125 cc for the Tao Tao

My chinese atv has about 700 miles on it and ive never changed that clutch before. should i?

How many splines was the clutch?

2:25 what’s the name of that arm I need to find one I’ve been looking for months on Amazon I can’t find it anywhere

On 2:17 what is that first black leaver u took off I can’t find it help!!!!

What oil did you use?

Where can u order a new clutch man ?

And how many teeth does it have

I put in a new clutch and now the the shift stick won't move and it still acts like it has no power. Any idea what I did wrong?

How many teeth is it so i can know which one to buy for mine. Because ther is 17 and 18 teeth