TASMOTA on SonOff Flash EASY Way | Guide 2020 🔨🔧

Рет қаралды 56,852

4 жыл бұрын

Wondershare Filmora: bit.ly/3cfDEUV
✅ Hardware:
- Board FTDI: geni.us/FTDI
- Sonoff: geni.us/Sonoff
- Cables: geni.us/Cable
✅ Software
- Tasmota: github.com/arendst/Tasmota/re...
- ESP Easy: github.com/letscontrolit/ESPE...
- Termite: www.compuphase.com/software_t...
✅ SUGGESTED VIDEOS ✅
✴️ The Best Android TV Box: • The Best Android TV Bo...
✴️ Android Boxes Playlist: goo.gl/qbBSqY
✴️ Android Remote Control Comparison : • Best Android TV Box Wi...
✴️ Android TV Box Gamepad Comparison: • The Best Android TV Bo...
✴️ Game Stream: goo.gl/TkJmUL
✴️ Mobile Phones & Tablets: goo.gl/kUxSNz
✴️ Mini PC´s Playlist: goo.gl/d4KSpt
✴️ External Storage: goo.gl/kNndsg
✅ SUGGESTED ANDROID TV BOXES ✅
🅾️ Best Hardware - geni.us/NvidiaShieldTV
🅾️ Best Price for the Performance - geni.us/MinixU9H
🅾️ Best TV Experience - geni.us/WetekPlay2
🅾️ Best Budget - geni.us/BeelinkGT1 & geni.us/MiBox3
✅ RECORDING GEAR: ✅
🅿️ Canon: geni.us/Canon650D
🅿️ YI24K: geni.us/YI24K
🅿️ FY G5 Gimbal: geni.us/FYG5
🅿️ Monopod: geni.us/MonopodVCT288
🅿️ Panasonic: geni.us/PanasonicFZ150
🅿️ Drone: geni.us/DJIPhantom3S
🅿️ 50mm Lens: geni.us/Canon50mm18
🅿️ 24mm Lens: geni.us/Canon24mm28
🅿️ Office Lights: geni.us/Aputure672W
◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉
Facebook: goo.gl/rCmcFZ
Twitter: goo.gl/LI299l
Instagram: goo.gl/Y4pjLt
Videohive: goo.gl/Sp6Wvr
#tasmota #flash #sonoff
◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉◉
Track: NIVIRO ft. PollyAnna - Fast Lane [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • NIVIRO ft. PollyAnna -...
Free Download / Stream: ncs.io/FastLaneYO

Пікірлер: 44

@alemazzuca 4 жыл бұрын

Roberto, o melhor tutorial para flashear. Great, thanks. I didn't have to install the Arduino IDE as I did for my older Sonoff!! Great, thumbs up!

@davidcox9983 2 жыл бұрын

Great video. This is the easiest to follow, and the most complete that I've seen.

@robertjones9189 3 жыл бұрын

Great video. This is by far the simplest way to flash the Sonoff basic.

@dmwaeschle 3 жыл бұрын

This was an excellent video, Roberto! Especially for a new to Sonoff/Tasmoto person like me.

@stephentittel4742 4 жыл бұрын

I followed your instruction and I succeed. Perfect instruction.

@abobobo943 4 жыл бұрын

Very easy way to flash it. Thank you bro.

@MichelVeenman 3 жыл бұрын

Thanks Roberto, this worked pretty well.

@murrayschreiber739 3 жыл бұрын

Thanks. Great video and really simple!

@DreamsOfTheMind-video 3 жыл бұрын

Love it, thank you, Roberto!

@TheUnofficialMaker 3 жыл бұрын

I entered the ssid wrong, but finially found FAQ that it can be reset by pressing the button 6 times really fast. Great video

@javlim3639 4 жыл бұрын

Been watching your videos for a long time here from Brazil, specially TV Boxes. Don't know if it's temporary or not, but I've noticed you stopped using B-Roll. If it's a change in style, let me say it was a nice change. Even TV news stations are stopping using it.

@sergedrachenberg8361 3 жыл бұрын

Thanks Jorge. It's too easy.

@GustavoGuevara123 3 жыл бұрын

Bueeeeenisimo, muchas gracias.

@michaelhorton6881 Жыл бұрын

Many thanks for this guide - There are two versions of WSPEasy _ESP32 and ESP82xx Which one should you use for Sonoff BasicR2? Thanks

@GutsyGibbon 27 күн бұрын

Nice job. Thanks.

@andrewgray200 4 жыл бұрын

Really good video... Why not take it to the next step for MQTT while you are there in the GUI.

@wcochuyt 3 жыл бұрын

day Roberto, work this also for the sonoff 4ch pro? greetings and thanks

@mw7185 4 жыл бұрын

I did exactly as you said but when I run the EASYFlasher.. I see messages.. RESETTING BOARD TRYING TO CONNECT and it goes on and then I get FLASH FAILED message box

@luigi0s1 4 жыл бұрын

Hi, is it possible to flash the tasmota firmware with an arduino uno and without the converter?

@mikebailey2970 3 жыл бұрын

well done!

@Technical_stuff86 3 жыл бұрын

Hi Roberto, do you have the original firmware Sonoff TH16, I found a few on the web but none of them work

@pictureright969 3 жыл бұрын

Thanks, how do I switch off the sonoff bridge without powering down? It is working as an alarm that cannot be put off which is a pain, when I am home or has to keep going off because I am there, unplugging the unit doesn't sound right, what should I do

@manosnikiifihara 2 жыл бұрын

Hello Roberto. I used your instructions and I flashed more than 20pcs of Sonoff wall switches (TX T1EU & T2EU two gang model) with Tasmota 12.0.1. Lately I had the following problem. In some units the second touch pad was working perfectly but the first touch pads is not responding although when I a pressing the touch pad sensor this is recognized with a beep sound. Please note that I used the same setup with the switches that don't have a problem. All problematic units (totally 3) are working properly when they are controlled through Wi-Fi by TASMOTROL Dashboard installed on my mobile. Any suggestion?

@Luismaia00 8 ай бұрын

Bom tutorial sera que funciona no sonoff DW2 sensor?

@nunom235 3 жыл бұрын

Funciona com o Sonoff TH16 (sensor de temperatura) ? Obg

@MaxGoddur 3 жыл бұрын

Question: I just flashed my Treatlife spst light switch using ESPhome within Home Assistant. The problem after getting this flashed and showing up on my wifi lan I realized I didn't know what the pin usage is for the relay inside the device. Without this information, I can not configure the ESPhome wizard-generated YAML. Can you help?

@christosimeonov9989 3 жыл бұрын

Do you know if htis works on the Pow r2 with 3.5 software?

@TheUnofficialMaker 3 жыл бұрын

Success!!

@pad8941 4 жыл бұрын

Good video

@blakadders 4 жыл бұрын

To everyone that had a failed flash. The "FTDI" adapter recommended here is not good. There are many fake FTDI chips in the market and the adapter doesn't have a voltage regulator. Please use the one recommended by Tasmota in tasmota.github.io/docs/Getting-Started/

@user-qe6zp1nj7n 2 ай бұрын

Ciao. Mi interessava sapere se era possibile anche con app Tasmota su dispositivo mobile creare o modificare ii comandi .

@Timatchu 2 жыл бұрын

Hello I tried this twice now and tasmotizer says it was successful but even after power cycle I’m not getting any Wi-Fi from the sonoff unit to amend Tasmota settings Any advice please ?

@bennguyen1313 4 жыл бұрын

I don't have the AZDelivery FTDI (FT232RL) Serial Adapter, but my computer has a COM port.. should I use ESPEasy's Flasher or Tasmotizer to flash the Tasmota.bin programming file? How can you control the SonOff programmatically thru the internet?

@andrewgray200 4 жыл бұрын

Once you remove it from the cloud use something like HomeAssistant to create a connection then from there you can use HASSIO Cloud or create a hole on your firewall to access HomeAssistant to toggle the device or see if you left a light on. Leaving it on cloud has pro's and cons. This way if WeLink or someone changes their policy about cloud it doesn't impact your home. Just look at Tuya and IFTTT last month in changing thier policy and breaking alot of peoples automations.

@andrewgray200 4 жыл бұрын

There is an OTA (Over The Air) Tasmoda you can look into as well. But you really need the adapter I won't try with a standard serial port on a PC.

@bellepie2027 3 жыл бұрын

after flashing, my unit just stop working...im using sonoff basic R3...please help

@franktechniek 3 жыл бұрын

I tried this, flashed ok, but no wifi from the sonoff. Then I tried Tasmotizer, which seems even easier. Just one program (tasmotizer) to download, flash with tasmota.bin and that's it.

@teddyruxpin3811 Жыл бұрын

but what if you dont have windows? how do you flash it?

@mw7185 4 жыл бұрын

Question: This failed. Dont you have to have SONOFF device powered during the FLASH Process ? Just curious

@familyplans3788 3 жыл бұрын

no no no !!! never ever have the mains power attached when doing this you will die !!!!

@mtrudel 3 жыл бұрын

Hi all Oh gosh. What can i say ... I watch many videos on how to flash Tasmota. NONE, absolutly NONE of the video on the web are saying that first step after flashing is to connect to the new temporary Tasmota WIfi network that will show in your Wifi network list in order to set the SSID and password. Then and only then your newly flashed Tasmota device will show on your network.

@calvinlove7904 2 жыл бұрын

easy mode never works for me....so no worky unfortunately

@nibba7614 3 жыл бұрын

Nice tutorial, but man, 7 euro for cheap ass usb-ttl? The SAME thing costs below 1 dollar on aliexpress. And its 100% legit. Btw, sonoff costs around 4-5 bucks.