TB118 - ELECTRICAL SAFE ISOLATION - BOILERS - DEMONSTRATION BY REGIN PRODUCTS

No video

TB118 - ELECTRICAL SAFE ISOLATION - BOILERS - DEMONSTRATION BY REGIN PRODUCTS - ACS GAS TRAINING

Рет қаралды 6,143

5 жыл бұрын

Here is the full demonstration of the correct procedure for the conformity of Gas Safe technical Bulletin 118 using our REGXS600 - TB118 KIT.
In this Video we are using our two pole tester, proving unit and a lockout tagout tag to help conform to the safe isolation part of GAS SAFE Technical Bulletin 118.
Also available is the Regin Loop tester (REGXP5), and the voltage detection stick (REGT18) which completes the full TB118 procedure.
Always check with Gas Safe for any updated procedures and if you are unsure of conformity.
------------------------------------
Regin Products Ltd - est. 1987
------------------------------------------------
Supplying over 1500 UK Plumbing, heating and builders Merchants with over 750 high quality products
------------------------------------------------
Want to be a stockist? Visit our website bit.ly/reginpro...
------------------------------------------------
Follow us on our twitter: @reginproducts
Follow us on our Facebook: bit.ly/ReginFB
Follow us on our Instagram: @reginproducts

Пікірлер: 6

@paulrossiter9567 3 жыл бұрын

Quick efficient explanation 👌🏻

@ReginProducts 3 жыл бұрын

Thank you Paul! We really wanted to make sure it was a clear as possible for everyone so they know exactly what they need, and how to carry it out, especially when being inspected.

@justsendmelocation5068 4 жыл бұрын

What should you do of your volt pen goes off a lights red?

@salandjim 2 жыл бұрын

Where in TB 118 is the gas operative instructed to perform a 'safety touch test' or an 'earth loop impedance test' or a 'polarity test' - the ONLY 'procedure' defined in TB 118 is the Safe Isolation procedure ! This video does nothing more than add to the confusion within the industry because TB 118 is ill-conceived, misguided, misworded, inaccurate and contains an unforgivably dangerous bunch of words - it should be no more than 2 pages long and explain what is in the title of the TB - a SAFE ISOLATION PROCEDURE ! The objective is simple - prove the test gear good, isolate the appliance, prove the appliance is dead and then perform a confidence test of the equipment to prove it is still good. The document has opened the flood gates for test gear manufacturers to sell kit for checks that are NOT required to keep the gas operative safe ....

@ReginProducts 2 жыл бұрын

registeredgasengineer.co.uk/wp-content/uploads/2017/03/TechnicalBulletin118.pdf

@mrc1068 11 ай бұрын

Could not agree more 👏