TBS Retrofit & Conversion Kits

No video

TBS Retrofit & Conversion Kits

Рет қаралды 2,179

Күн бұрын

A very straightforward port but have a look before you buy if ya want.
A retrofit or a conversion kit for a Team Blacksheep TX, also a step-by-step to see how easy the process is!
(Soldering required tho..)
-
Where to buy:
TBS Crossfire Nano TX Retrofit Kit
www.team-black...
TBS Tracer Micro TX Conversion Kit
www.team-black...
-
Chapters:
0:00 - Introduction
1:29 - Whats inside - TBS Crossfire Nano TX Retrofit Kit
2:12 - TBS Crossfire Nano TX Retrofit Step-by-step
10:00 - Whats inside - TBS Tracer Micro TX Conversion Kit
10:48 - TBS Tracer Micro TX Conversion Step-by-step
15:24 - TBS Tracer Micro TX Conversion Test
15:43 - Final words
-
Music Used:
Kitrano - Sunday
Randy Sharp - Drinking Games
Aves - Speedbumps
Duffmusiq - The Frick

Пікірлер: 10

@JuanBadillo Жыл бұрын

Just the info I was looking for. Thank you for this easy to follow video.

@lilnassau 2 жыл бұрын

A month ago i could only find a video not in English. Bit the bullet and decided i will have to figure it out. Nano to micro and 1 day after i figured it out your video showed up. Lol its still good validation. Thanks for posting.

@TanFK 2 жыл бұрын

Fpv builders are a resilient bunch ✌️

@kenn6612 2 жыл бұрын

perfect, thanks for sharing this! plus a gentleman from Klang :)

@MarkGrob 2 жыл бұрын

Thanks for the video Nano conversion was much easier!!

@drenom4264 2 жыл бұрын

Thank you for your video. Just starting myself in fpv world and you just made it easier and one less task for me to solve.

@TanFK 2 жыл бұрын

Your welcome. Good to hear you’re starting out! Hope you get to make some Fpv buddies soon!

@ToothlessAndy 2 жыл бұрын

That was a great video ,very well done great editing, thank you made converting very easy,got yourself a new subscriber look forward to seeing other content.

@01staka01 2 жыл бұрын

Great detailed video! Was wondering if instead of soldering the adaptor to the micro, will running wires straight from the nano to the micro work? this way I could re use the nano setup on a different radio.

@TanFK 2 жыл бұрын

Sounds like you'll be using the Nano TX casing, then solder wires to the 5 solder pads on the board towards an external 5-pin head. The results your looking for, sounds like being able to plug in the nano body into a jumper T lite or use the wired pin-head to plug into a TX16S. It does sound possible, as you'll be plugging into one radio at a time, and the PCB swing both ways. But here are a few inconveniences. - The body of the Nano kit is tight, and if you want to screw it in, you'll need to cut an opening of the Nano Csaing for the 5 wires to the 5-pin head to come out of. - Before The first time you plug in the 5-pin head to the JR Bay of the TX16s , please ensure orientation of the pin is correct, and perhaps mark the highest pin with a tape to ensure you plug it in correctly every time. - When plugging in to the 5-pin JR Bay of the TX16s, your module will be hanging, causing some inconveniences if you fly while standing. Hope your retrofit of a retrofit works man!