Tearing Down Justin Zeigler's 3,336-HP Cummins Enforcer Engine

Рет қаралды 36,270

2 жыл бұрын

Recently, D&J Precision Machine owner Drew Pumphrey invited the Engine Builder team to his Cambridge, OH diesel shop to help tear down Justin Zeigler's UCC record-setting 6.7L Cummins-based Enforcer engine. We go over what happened during the UCC weekend and what Drew expects to find before tearing it down to see the results.
www.enginebuildermag.com/
www.djprecisionmachine.com/
www.zeiglerdieselperformance....
#diesel #engines #cummins #horsepower #performance #ultimatecalloutchallenge #dodge #enginebuild #nitrous #turbo #damage

Пікірлер: 55

@brianb5779 Жыл бұрын

Clearly the camera guy has no interest in this stuff,,,for the love of goodness get a clue

@dodgefan1259 Жыл бұрын

Fr, dude acted like he was gonna get bit by it!

@sempergumby8734 Жыл бұрын

At the end they found the gerbil on treadmill dead in the motor.

@georgef1176 Жыл бұрын

Congratulations to drew and the team. That engine is a beautiful beast and a work of art.

@Mike-xt2ot Жыл бұрын

An open and honest engine builder is the key to a successful season. He's not afraid to say " this will fail' and only dig deep into your pocket when it's the proper time to. If he told me " it's time for a billet crank and or block" then I know its time to dig deep if I want to continue to play and feel good about money spent. I'd have this guy build all my engines and feel confident. He knows his shit.

@3DProductions 5 ай бұрын

thats step 2, step 1 is a fuckin huge wallet

@drewsharpe7484 Жыл бұрын

I believe I’d want to magnaflux any single part that was reused. Those guys at D&J have done one hell of a job with there enforcer engines. I want one!lol

@Thesongstaysthesame Жыл бұрын

You won’t regret it. I’ve street driven one for 3 years at 1350hp and not a single hard part issue. I’ve had the bottom end apart to have a look, not a single problem! Well worth the money

@billjohns3908 Жыл бұрын

3,300 hp with a stock crank I don’t think theirs another engine on the planet that can do that, especially with 6.7 L

@cs-gj3yf Жыл бұрын

6.0 powerstroke

@GordonTurnerr Жыл бұрын

@@cs-gj3yf LOL

@ll_Helixx_ll Жыл бұрын

@@cs-gj3yf (it’s been bulletproofed)

@cs-gj3yf Жыл бұрын

@@GordonTurnerr 6.0's have the strongest bottom end in the truck game, jesse warrens 1910 run was on a stock bottom end with 100+ psi of boost and 4 kits and welded heads, educate yourself.

@GordonTurnerr Жыл бұрын

@@cs-gj3yf my math says that's 1300hp shy of 3300...

@hpa101 Жыл бұрын

Interesting watch, cheers guys - Taz.

@superkillr Жыл бұрын

Talked a WHOLE bunch about tuliped valves... didn't show the head but once. Whoever edits these videos... man you guys need to do a better job with your presentation of information.

@Srdieselshawn Жыл бұрын

I’m impressed with how the engine is really holding up. The inline 6 engine with 7 large main bearings to support that crank with those cylinder pressures and load surely helped a lot. Nitrous is nasty stuff especially when they backfire. At that power level, it’s getting near to where top fuel style engine rebuilds is a must to make sure none of the parts are starting to fail. Those piston rings sure are taking a severe beating to last just a weekend.

@lamarzimmermanmennonitefar5269 Жыл бұрын

Dt360 might do better

@ThanksHero Жыл бұрын

@@lamarzimmermanmennonitefar5269 apparently not

@burtbrooks7731 Жыл бұрын

Nobody does it like D & J 💪💪 I watched that engine build on fire punk

@neilwalker8686 Жыл бұрын

Camera angle and editing is horrible. When someone is explaining something and pointing it out, zoom in on it instead of their face.

@ChannelZeroOne Жыл бұрын

I think there is more power to be chased after based on the tulip valve. 4000HP might be possible. Here I was thinking this record will never be beat. I look forward to next years event. 🏁🏁🏁

@frankz5864 Жыл бұрын

So interesting to see the the issues people run into with this kind of crazy gear.

@keith38able Жыл бұрын

terrible camera work

@GMCJay_lly Жыл бұрын

HORRIBLE cam work!

@XxMusclecarsxX Жыл бұрын

dude I got so triggered when they didn't film the ring gap and piston. You clearly have a master engine builder showing us something I didn't even think could be an issue and they didn't film it right!

@kylemoore9626 9 ай бұрын

Dang the Cummins stuff is tough 😂

@user-nf3oq2ge3g 7 ай бұрын

Pistons are forged from cold rolled 100dollar bills, with gold encrusted tops, and pure diamond coating, and the oil was custom mammoth blood from 20,000 years ago and is aged perfectly.

@bdjm8595 Жыл бұрын

Interesting tear down!!!!

@FrankBUILTperformance Жыл бұрын

So awesome !

@jasonmorris2813 Жыл бұрын

Damn I wanted to watch it but half way in I bailed on the camera man

@user-nf3oq2ge3g 7 ай бұрын

Gale banks just peaked through the window

@spenserh98 Жыл бұрын

Curious what RPM y'all hit on the winning dyno pull?

@lukelanam6045 Жыл бұрын

I wanna say peak hp was at like 5300ish.

@Sir.VicsMasher Жыл бұрын

3:48 Getting 3,000+ through tires on a chassis dyno is a huge accomplishment. Pro drag racers use hub dyno's on their 3,000+ horsepower vehicles (see FuelTech's page) how come comp diesel guys are not?

@fry.master Жыл бұрын

I am going to guess they run the dyno with such a high wheelspeed / gearing disadvantage that they can do it?

@CampbellSoup3 Жыл бұрын

If his truck was on a hub dyno I think it probably would’ve been close if not over 4,000 hp

@coryament Жыл бұрын

where are those valves

@bcbloc02 Жыл бұрын

Looks like the converter ballooning might be going to start causing some thrust issues soon. From what I could see it looked like the worst bearing.

@PigglyWigglyDeluxe Жыл бұрын

No one has been able to answer me and I’ve posted this question everywhere… why do diesel guys only run 1/8 mile? Why not 1/4 mile?

@yepitsme2536 Жыл бұрын

Saftey. I know it sounds like a lame answer but there's already been some accidents due to speed. And yes I know the gas guys do it but, they are considerably lighter than the 4x4 diesels (such as Zeiglers). It gets exponentially harder to stop as the weight goes up. That's why recently guys have been building lighter promod style cars similar to gas cars. It's a lot safer

@timberlan1234 Жыл бұрын

What was the tq?

@cryptoredneck1215 Жыл бұрын

Probably around 7k NM

@CampbellSoup3 Жыл бұрын

I believe it was around 3900ft-lbs

@bentheguru4986 Жыл бұрын

Dyno run with rear brakes dragging, might pay to remove the drag before dragging.....

@joshuaquilliam2887 Жыл бұрын

Uh no, diesels make power based on load. If he didn't load the truck with brakes he would blow straight through the dyno. As you can hear in the video he already blows through the run in a second due to the power. At some point we are going to hit a wall with the actual dyno itself lol.

@jetro7349 Жыл бұрын

100% the worst tear down video I've ever seen, didn't see ****.

@richardj163 Жыл бұрын

Thanks for the warning.

@burtbrooks7731 Жыл бұрын

6 pounds of nitrous in 1.1 seconds 😂holy crap

@robertgarren7684 Жыл бұрын

Be nice to hear you but the music how stupid

@joshuaquilliam2887 Жыл бұрын

Exactly what I was saying to myself while Drew was talking. SHUT the music off so I can actually hear the man. I could care less about the damn soundtrack.