Tutorial: How To Safely Replace the Propeller Motors On a DJI Mavic 2 Pro or Zoom Professional Drone

No video

Tutorial: How To Safely Replace the Propeller Motors On a DJI Mavic 2 Pro or Zoom Professional Drone

Рет қаралды 15,673

Technology Tips

Күн бұрын

Пікірлер: 53

@shanemitchellspencer 5 ай бұрын

Smart idea to use the shrink tube. My Air 2S needs an arm replacement, but the motor is still functional. I can save $40 dollars with this technique!

@TECHNOLOGYTIPS101 5 ай бұрын

Thank you, and good luck with the project!

@shanemitchellspencer 5 ай бұрын

@@TECHNOLOGYTIPS101 thanks! I only had it for 5 minutes before I crashed it… more reading needed before my next flight 😅

@TECHNOLOGYTIPS101 5 ай бұрын

@@shanemitchellspencer Good luck and safe flights 🙂

@OutdoorFreedomDk 9 күн бұрын

Thanks for the video.. But I got a DJI mini 4 pro, and it need a new motor. So I looking for a video that showing that. But thank you for this video.

@TECHNOLOGYTIPS101 8 күн бұрын

No problem 👍

@stbernard1966 Жыл бұрын

Thanks a lot thanks for the detailed work did a great job. And I know how to do it if I have any problems .THANKS.

@TECHNOLOGYTIPS101 Жыл бұрын

You're very welcome!

@ryankienbaum8894 Ай бұрын

Thank you sir😊😅

@TECHNOLOGYTIPS101 Ай бұрын

You are very welcome! :-)

@3dgaming626 Ай бұрын

I need video of joining new arm with the drone

@TECHNOLOGYTIPS101 Ай бұрын

I have one for that, here is the link kzfaq.info/get/bejne/ma2cfaaCzsfQdaM.html

@luiz_tolo 7 ай бұрын

Ok, tks friend, you are the one

@TECHNOLOGYTIPS101 7 ай бұрын

No problem

@noureddineelaroussi7680 3 ай бұрын

"Based on the size of the whole, you chose the right one" are we still talking about the motor here sir?

@TECHNOLOGYTIPS101 3 ай бұрын

Both the Motor and the Heat-shrink tubing.

@peterstl8550 5 ай бұрын

Hi - thank you for the video. Do you have a link to the other video you mentioned for disconnecting and reconnecting the black part that holds the propeller to the motor that has to be transferred to the new motor? Thanks again.

@TECHNOLOGYTIPS101 5 ай бұрын

I think this video covers that kzfaq.info/get/bejne/ma2cfaaCzsfQdaM.html

@paramedic1988 3 ай бұрын

Is ech motor of every arm the same?? So can i take a motor from front left leg and replace with this the motor of a back roght leg?

@TECHNOLOGYTIPS101 3 ай бұрын

No they are not the same, one rotates clockwise and the other counter clockwise aka ( Anticlockwise )

@globalcontabilgo6233 10 ай бұрын

muito bom seu vídeo!

@TECHNOLOGYTIPS101 10 ай бұрын

Thank You!

@curtiswhite282 2 жыл бұрын

Great video

@TECHNOLOGYTIPS101 2 жыл бұрын

Thank You!

@LjuboDomanovicLjubo44 Жыл бұрын

Can you please make video of replacement of front motor?

@TECHNOLOGYTIPS101 Жыл бұрын

Sure, I will do that as soon as I get another one on my hands.

@1000000volts Жыл бұрын

Hi what awg is the motor wire please

@TECHNOLOGYTIPS101 Жыл бұрын

Hi, it is a 22 AWG cable, although it appeared to me that it was a 20 AWG. You can see the AWG measurement at 6:22

@Akalashnik1 Жыл бұрын

Excellent

@TECHNOLOGYTIPS101 Жыл бұрын

Thanks

@mahamevnawabuddhistmonaste9832 6 ай бұрын

can i have another link to the motor

@TECHNOLOGYTIPS101 6 ай бұрын

www.ebay.com/itm/305012466634

@melking256 Жыл бұрын

Can u show me how to get the front arm apart on a mavic air 2

@TECHNOLOGYTIPS101 Жыл бұрын

As soon as I get one I will do that, currently I only have the DJI Phantom 3 and Mavic 2 on hand.

@ExtraordinaryView Жыл бұрын

One of the tabs that holds the prop onto the motor broke off and went into the motor. Any tips for how to get it out other than holding upside down and hoping it falls out?

@TECHNOLOGYTIPS101 Жыл бұрын

If you can visually see it you can use a fine pair of tweezers to fish it out. If you can't see it shacking it upside down or using a vacuum is the only option I think.

@melking256 Жыл бұрын

Sobi cud replace the motor without cutting the wires

@TECHNOLOGYTIPS101 Жыл бұрын

You could if you take apart the Motor, but I wanted to be least intrusive

@123jack7 Жыл бұрын

Can you tell me why the dji drone (eg dji mini 2) runs out of battery, so why when I have charged the battery to use it, I want to store it for a long time without fully discharging it. Just like when the new dji sold, thank you!

@TECHNOLOGYTIPS101 Жыл бұрын

All Lithium ion batteries naturally drain when they are unused at a rate of about 10% per month give or take. This drainage rate is higher on some Lithium Polymer batteries. So even when you buy a brand new drone the battery can never be 100% full when you open the box.

@123jack7 Жыл бұрын

@@TECHNOLOGYTIPS101 So can I discharge the battery 🪫 (LiPO) for long-term storage like the manufacturer? Thank!

@philldownes8685 Жыл бұрын

@@123jack7 NO...Charge it fully before storing, it will go down to a ceretain level on its own providing you have done the battery updates.. mini 2 has smart battery and will self discharge to the point it needs to be over 6 weeks or so.

@Crazy2limchai 8 ай бұрын

Is the mavic 2 pro and mavic 2 zoom are the same kv?what kv it is?tq

@TECHNOLOGYTIPS101 8 ай бұрын

Yes they are identical, only the camera mechanism is different. I believe they are both 1003 KV, but I am not 100% sure.

@gtmover3573 Жыл бұрын

I would like to change my motor I live in Albany New York where is the closest location

@TECHNOLOGYTIPS101 Жыл бұрын

Sorry we are only in San Diego California, we don't have a location in New York.

@jesusblessthesecommentsamen 9 ай бұрын

Do you know how to test the motors for a bad motor with a multi meter. Got a burnt ecu board after a crash

@TECHNOLOGYTIPS101 9 ай бұрын

The easiest way to test any DC motor is to attach a volt meter to the input wires and spin the motor with your hand and see if there is any current generated. If the coil is not burned out you will see some voltage and current, it if is completely burned you will not get any output. Keep in mind that if the motor coil is partially burned this will not be a conclusive diagnostic test, so you will need to apply power to it and see if it spins.

@jesusblessthesecommentsamen 9 ай бұрын

@@TECHNOLOGYTIPS101 ok that’s that helps 👍

@AlexGreenberg1 Жыл бұрын

Is it possible to upgrade to a more powerful motor?

@TECHNOLOGYTIPS101 Жыл бұрын

Unfortunately you can't for many reasons. Firs the transistor or FET that runs this motor is only designed to support that specific amount of current that this motor draws. If you upgrade it to a more power full motor it will draw more current and it could burn out the power transistors on the motherboard. Second the weight of this motor is very light compared to it's power, stronger motors are much heavier. Third the battery pack will not support more current draw than what these motors draw.

@AlexGreenberg1 Жыл бұрын

@@TECHNOLOGYTIPS101 interesting, I only assumed it would be possible because people are upgrading their Avata motors

@TECHNOLOGYTIPS101 Жыл бұрын

@@AlexGreenberg1 DJI drones are mostly proprietary and not as customizable as home-built drones.