Spin #52 - Learning to Spin on an eSpinner

Рет қаралды 25,270

Күн бұрын

The first three minutes of this video explain the different controls on the EEW Nano. Then the rest of the video covers the basics of spinning.
Check out my store: www.dreamingrobots.com/
Here are some more videos about the EEW Nano:
* USB Battery Packs - • SPIN #50 - Picking a U...
* Foot Switch - • SPIN #49 - EEW Nano Fo...
* 3D Printed Lazy Kate - • SPIN #46 - Lazy Kate
* 3D Printed Bottom Cover - • SPIN #44 - EEW Mini 2 ...
* EEW Nano Homepage - www.dreamingrobots.com/eew-nano/

Пікірлер: 50

@donnamartin927 11 ай бұрын

I just got my Nano 2 . I’m going to play with it again this evening. I’m glad I watched this video.

@Clubkidknitter 6 ай бұрын

VERY succinctly done! EXCELLENT video and very well paced!

@OvisAriesFarm 5 жыл бұрын

Instead of scotch tape if you use a little Velcro “dot” on your bobbin it works much better and isn’t as fiddly as using tape. Lasts longer too.

@itmakesyousmile 5 жыл бұрын

Perfect! You covered all the must know items, and enough of the 'how to' for noobs to get started. I can't wait for the explosion of spinning activity that will happen once people start to receive their Nanos.

@DreamingRobotsBlog 5 жыл бұрын

Thanks! Good to know you think the right details were covered.

@anaesteves8268 5 жыл бұрын

I'm a complete spinning noob and found this video very comprehensive and helpful. Can't wait to get my nano wheel!!!

@thelazyalpaca948 2 жыл бұрын

Finally picked my EEW back up as I've been dying to spin. Couldn't figure out why my yarn was underspun and not going on the bobbin. Turns out my brake band was far too tight! It is now at a manageable tension. Still getting used to even drafting, but now I have a better spin on my yarn and thus far less frustrated! Thank you for making such an affordable (and tight-space friendly) machine! As well as this great video to help newbies like myself.

@ela1984maa2 5 жыл бұрын

Looking forward to receiving my Nano! Thanks for this video.😊

@nvclaudiamack 5 жыл бұрын

Great instructional video! I'm eagerly awaiting the August shipment of my EEW, and new to spinning. This will be so helpful for getting started😄❤

@perujive 4 жыл бұрын

I just got mine for Christmas and I am in love! I did a quick spin and I love that I am finally getting an even spin. Thank you

@heathercope8026 4 жыл бұрын

I've just ordered my and I'm stupidly excited!

@LChalifoux 5 жыл бұрын

Thanks for making such a clear, helpful demonstration of using the Nano, and the basics of spinning. I am hoping to give spinning a try soon(ish) and the Nano seems like the perfect option for me. I'm putting it on my birthday list!

@trendyorwhatknot 5 жыл бұрын

Received ours! So cool! Thanks!

@denisepage-demorst2284 4 жыл бұрын

I don’t have this particular brand of e spinner but I still found the video to be very instructive. Thank you!

@hettyestes3543 4 жыл бұрын

This looks like the perfect travel spinner. I’m excited to get mine.

@lynnc728 Жыл бұрын

can't wait till you have more stock of the nano so I can get one

@libellula3313 2 жыл бұрын

Thanks

@TheYarnCloset 5 жыл бұрын

I love that lazy kate!

@DreamingRobotsBlog 5 жыл бұрын

That lazy kate is just one my wife has from one of her treadle wheels. I couldn't find the exact lazy kate, but this one is similar: woolery.com/majacraft-universal-tensioned-lazy-kate.html

@OvisAriesFarm 5 жыл бұрын

I love it too! Just FYI though, you can make a lazy kate from a shoebox and straight knitting needles or narrow dowels. Doubles as a carrying box for your Nano and supplies too!

@TheYarnCloset 5 жыл бұрын

Kelly Bell brilliant

@OvisAriesFarm 5 жыл бұрын

A great plying trick is to put your lazy kate as far behind you as possible while plying. What this does is help even out the twist in your singles before you ply, which makes your yarn a lot more consistent. This is a trick learned from Alden Amos’s big book on handspinning. Excellent reference and would def be my one “desert island” spinning book!

@AlisonDaykin 5 жыл бұрын

At his is excellent! Please could you make it clearer how you adjust the tension brake, though.

@DreamingRobotsBlog 5 жыл бұрын

Once you have it, I think it will be obvious. There is just a slot and you pull the cord. It is pretty easy once you have it in front of you.

@view-kz7jo 4 жыл бұрын

This is first time spinning for me ... glad I found my nano. I too had trouble with overspinning the yarn... then it bunches up and won’t collect on the bobbin. I found that if I tightening the tension helps but then I’ve found the holes in the triangular wires are too small... they tend to “catch” the fibers thus stopping it from winding. Do you offer larger wire triangles or is there a substitute for them? Thank you for your help.

@DreamingRobotsBlog 4 жыл бұрын

I don't. The nano isn't very good at spinning thick yarn like you are probably spinning. I would suggest spinning thinner yarn. Some people do sell 3d printed sliding hooks but thinner yarn is usually the better solution, especially for new spinners.

@tybash1 4 жыл бұрын

Got my wheel and love it but now I can't get it to pull the spun yarn through. It keeps twisting it but not putting it on the bobbin. I tried adjusting the tension and it either logs the motor down too slowly or it spins it and no uptake at all. Any ideas?

@DreamingRobotsBlog 4 жыл бұрын

There are a bunch of suggestions on www.dreamingrobots.com/eew-nano If you want to contact me use this page: www.dreamingrobots.com/contact-us/

@gerdavogel5287 4 жыл бұрын

Snicklefarkles Me too, and I am a very experienced spinner.

@OvisAriesFarm 5 жыл бұрын

Is there some way too hook up a variable-speed footswitch (like on a sewing machine) to the Nano?

@DreamingRobotsBlog 5 жыл бұрын

It's probably possible, but it would be quite hard since the pedal would need to handle the PWM.

@OvisAriesFarm 5 жыл бұрын

Dreaming Robots thanks Maurice!

@pattityk7879 5 жыл бұрын

I’m having trouble with the yarn collecting on the bobbin, it won’t wind? What am I doing wrong

@DreamingRobotsBlog 5 жыл бұрын

Make sure you tape the lead yarn so it does not slip

@pattityk7879 5 жыл бұрын

I changed my roving and sat back alittle bit more and I’m doing great!!! Love your invention, thank you so much!!!

@om6859 3 жыл бұрын

Hello, where can I buy a device like this? Thank you for your help

@DreamingRobotsBlog 3 жыл бұрын

You can purchase it here: www.dreamingrobots.com/product/eew-nano/

@liudmilayagudina3086 4 жыл бұрын

I want to buy a black Nano electric spinning wheel. where can I buy it, on which website?

@DreamingRobotsBlog 4 жыл бұрын

You can buy it here: www.dreamingrobots.com/

@olgabeatrizbustamante2809 3 жыл бұрын

¿¿¿ DONDE ESTA EL MOTOR?? NO ENTIENDO INGLIS

@dianathefiberfan5116 4 жыл бұрын

Where can I buy the Nano?

@DreamingRobotsBlog 4 жыл бұрын

You can buy it on my store here: www.dreamingrobots.com/product-category/electric-eel-wheel-nano-store/

@yelenav1285 2 жыл бұрын

Hi I watched your video numerous time and no matter what I do I still have over twist and of course yarn doesn’t go to a bobbin not to mention that low speed is not working!!! Very frustrating any advice?!

@DreamingRobotsBlog 2 жыл бұрын

If the flyer is spinning then the yarn either has to have uptake or twist unless it isn't threaded correctly. I can't really guess at what is wrong from your description. There are some longer videos about spinning on the EEW Nano here: www.dreamingrobots.com/eew-nano/

@yelenav1285 2 жыл бұрын

@@DreamingRobotsBlog thank You sooo much!!! It was my immaturity as a spinner🤪