No video
Tekton Tools Best Beginner 1/2 drive 84 Piece 6 Point NO SKIP Socket Set Look before you Buy
Рет қаралды 119,866
5 жыл бұрынTekton Tools Best DIY Beginner 1/2 drive 84 Piece 6 Point NO SKIP Socket Set Look before you Buy
TEKTON 13203 1/2 inch Drive Socket Set, 84-Piece
Complete Master Set : A comprehensive collection of 1/2 inch drive tools, this set has every size from 3/8 to 1-5/16 inch and 10 to 32 mm in both shallow and deep lengths. It also includes a universal joint and 10 inch extension, which are rarely found in other sets.
TEKTON 1/2-Inch Drive Socket Set, Inch/Metric, 6-Point, 3/8-Inch - 1-5/16-Inch, 10 mm - 32 mm, 84-Piece
Item #13203 $190
www.amazon.com/TEKTON-2-Inch-...
Tekton 1/2 Inch Drive 6-Point Socket & Ratchet Set, 84-Piece (3/8 - 1-5/16 in., 10-32 mm)
Item #SKT25302 $200
www.tekton.com/1-2-in-dr-skt-...
Superior Performance :
Each socket has a high-torque 6-point design that grips flat sides of fasteners, not corners, preventing round-off. Needing just 5 degrees of swing to operate, the smooth, finely geared 72-tooth ratchet isn't limited by tight spaces. When the going gets rough, the long 18 inch breaker bar offer loads of leverage to loosen stuck lug nuts and rusted bolts with ease.
Organized Storage :
The tough carrying case keeps everything neat and organized. Making the most of the space, two built-in parts trays hold things you're working on or extra tools you want to keep with the set.
16-piece 1/2 inch drive shallow sockets (6 point) - 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16 inch
16-piece 1/2 inch drive deep sockets (6 point) - 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16 inch
23-piece 1/2 inch drive shallow sockets (6 point) - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 mm
23-piece 1/2 inch drive deep sockets (6 point) - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 mm
1-piece 1/2 inch drive ratchet (10 in., 72 tooth)
1-piece 1/2 inch drive x 18 inch breaker bar
2-piece 1/2 inch drive extensions - 3, 10 inch
1-piece 1/2 inch drive universal joint
1-piece carrying case
Spend the extra $50 and get the above set and don't get the smaller sets
Tekton 1/2 Inch Drive 6-Point Socket & Ratchet Set, 52-Piece (10-32
Item #SKT25201 $150
www.tekton.com/1-2-in-dr-skt-...
Tekton 1/2 Inch Drive 6-Point Socket & Ratchet Set, 38-Piece (3/8 - 1-5/16 inch)
Item #SKT25101 $150
www.tekton.com/1-2-in-dr-skt-...
This video is for entertainment purposes only. ClientGraphics assumes no liability for any purchases, warranties, repairs or modifications performed by the viewer as a result of the information contained in this video.
@ilearnedsomethingnewtoday6193 3 жыл бұрын
Tekton has changed the entire industry. Even hardcore professionals are seeing the value in Tekton. 2 of the mechanics in our shop have practically shed tears that Tekton wasn't available when they bought their tools. We're talking about many many thousands of dollars wasted on nominally better tools. And for me speaking from experience, I have gotten warranty replacement faster with Tekton than with snap on
@jobu9224 3 жыл бұрын
I agree, some of the highest value in the industry. Pliers I would still go to Channellock but the rest is unbeatable value.
@sandman7849 3 жыл бұрын
Have you seen what Tekton is producing now? I would not say Snap On is nominally better.
@justinbriggs7560 3 жыл бұрын
I have both snapon and tekton sockets and I think the fit and finish is quite comparable.
@midwestapprentice1904 2 жыл бұрын
@@justinbriggs7560 snap on flank drive sockets seem to grip better but even here in the rust belt I don’t notice that much I’ve never had a job yet that I just needed flank drive, as long as they fit well enough it will be fine, and tekton stuff is very hard to break with a great warranty
@phtevenmolz5030 Жыл бұрын
@@sandman7849 I would say my Tekton sockets that are less than a year old and rounding internally would disagree. They see heavy use, but my Proto sockets are a couple decades old and show little to no wear and my Snap On sockets are about the same age as the Tekton, but also show no wear. I’m going to try their warranty process to replace the worn sizes, but I’m not impressed by their longevity.
@flipicaneze 4 жыл бұрын
I love that I can get Metric only no-skip sets with Tekton.
@ajs622 4 жыл бұрын
I have this set. I absolutely love it it is the best socket set I've ever used. I love that there are no size skips. The sockets themselves fit perfectly zero slop when engaged on a fastener. If you want to upgrade ratchets for some serous torque I recommended Tekton's 24" long 1/2" drive ratchet. While more of the big sizes will be required when working on trucks Its not just trucks that use big sizes. Cars too will require some of them. For example the CV Axel on many cars will use 32 mm.
@truckerpeterose 5 жыл бұрын
You can’t understand how huge this set is until you get your hands on it. Absolutely the best tools on the market. Thank you for showing these.
@ClientGraphics 5 жыл бұрын
Trucker88 I had to shoot video 3 separate times to get things in frame that I missed the time before. Thanks for being patient on this one and I love the new ratchets while the new sockets were okay. Appreciate you watching
@shawn7913 3 жыл бұрын
I've been using that same set for a few years now. I'm very happy with it other than the 72 tooth ratchet. They (1/4, 3/8, & 1/2, I purchased all three sets) would almost always change directions by themselves when using. So I upgraded the ratchets to SO.
@MCEngineeringInc 4 жыл бұрын
I have the 58 piece for home use and have been very happy with it. Including a breaker bar was a bonus.
@justinbriggs7560 3 жыл бұрын
I love the quick release buttons they have on the new ratchets. I have both and I just love the feel on the new ratchets.
@jimnoyb1209 5 жыл бұрын
Best tools I have purchased in over 40 years in tools. But do business with the company, not the box store.
@markluxton3402 4 жыл бұрын
If you can order direct, yes. The company says that they will honer their guarantee for both US and Canadian citizens, no matter where you get the tools from, even if from a flea market. They tell me they will soon make it possible for Canadians to also order direct. I did use a Tekton authorized seller on Amazon, but the company told me it would not matter where we got them; North America is covered. They are the best tools I have had my hands on for awhile. The same day, some "blemished", precision American made tools arrived. About half price, on some the name removed. One of the last precision tool manufacturers. PEC I ordered a 4 piece combination square set, having SAE and Metric, and an extra 18 inch ruler. As soon as you put these in your hands, ignoring blemishes, you know you are holding a better tool than any combination square that came from a big box store. I had to get my blemished set through Ebay, also an authorized seller, for these PEC tools.
@Hojjiifp 2 жыл бұрын
I got the whole full set 1/4,3/8 and 1/2 socket sets...love them very convenient.
@matolittleelkwells5377 4 жыл бұрын
Great video Tekton is stepping up their game great set if you need one keep bringing quality information and letting us know what is going on in the tool industry
@cowboy0clayton 5 жыл бұрын
I have this set and use it professionally at my job (diesel fleet tech). I love it. No problems since I got it 1 year ago
@ClientGraphics 5 жыл бұрын
That’s awesome to hear and the money you saved allows you to get other things you really need. If anything does break, warranty it and buy that size in another brand for the long haul isn’t a bad plan. That’s my plan in a nutshell.
@OneMechanic 5 жыл бұрын
I'm a fleet mechanic also and have The complete set of deep and shallow in metric... very happy with mine. And they work well with my Snap-on ratchets... lol
@hackdeez1075 4 жыл бұрын
Been using mine in automotive for about two years and they've held up exceptionally well
@corycg9624 Жыл бұрын
All my 6 point sockets are DeWalt and Tekton my cheaper sockets are my 12 point sockets most 12 point sockets I have are Jobsmart from Tractor Supply they seem to be decent sockets.
@phtorres45 5 жыл бұрын
Love Tekton socket sets. I use the sockets with a gear wrench 120 tooth 3 degree swing ratchet. Them two together make pretty good set up.
@corycg9624 Жыл бұрын
I don’t have a 120 tooth Gearwrench ratchet mine is 90 tooth I have both 1/2 and 3/8 and I have Tekton sockets also Tekton makes really good tools their on par with DeWalt maybe even better.
@PawOfRizzo 5 жыл бұрын
Nice set. Makes me wish I had a reason to use sockets more! And your opening intro credits with the theme song are looking really professional and cool. The new logo looks nice.
@rodw 4 жыл бұрын
Thanks Chris, for sharing your thoughts and videos, Rodney
@ontargetthomunclesam3926 4 жыл бұрын
TEKTON is what has replaced all of my snap on and Mac tools been turning wrenches for 40 years owner of two garages and most of my guys are now using TEKTON tools never had a issue nor a replacement with any in my boxes for about 5years now so I can't say good or bad with customer service thanks for the video I certainly do appreciate it
@ClientGraphics 4 жыл бұрын
Appreciate you watching and commenting. My warranty experiences have been quick and easy. Although it was my fault i needed to test the warranty.
@QUANTRELLBISHOP 2 жыл бұрын
I have the 3/8 kit no skip 10-24 it's a beast
@johnp556 4 жыл бұрын
Sockets are maddening, typically I've got three sets going for one project. I want one or two complete sets
@FinallyMe78 5 жыл бұрын
You will be hard pressed to find another set from other manufacturers to even compare to. For sure, make sure you get the new sets and not the old ones, for the better ratchet (I also like how the new smaller sockets neck down, compared to the old ones). I still haven't bought this set, but it is high on my list of need to have. I am sorta glad I waited so that I can get these new improved versions.
@theodorejohnkaczynski9442 2 жыл бұрын
As a mobile forklift technician I cannot stress how much I love the tekton sets. I go into customers alot and can only bring so much without taking multiple trips and I can throw a 1/2 kit, multimeter and an impact gun in a standard size northface backpack and do 90% of my job. And the kits don't go to shit when they rattle around in your van all day
@derekquinones8614 2 жыл бұрын
The 74 piece 3/8 tekton set is a awesome set also 120$ couldn’t beat it with a breaker bar also!!
@themaintenanceman1 5 жыл бұрын
Great job buddy! That is a heck of a great deal for that kit! Tekton I think is a solid option 👍
@irongoose3865 3 жыл бұрын
You call this a budget value set for a beginner. Let me start off by saying I bought the 3/8 sae + metric set for a friend sight unseen, when I got it I was comparing it to my own made in The USA Craftsman set that I've owned for 30+ years and I found the sockets to be of equal quality in my opinion. The ratchet is much better though The Craftsman's ratchets of that era weren't anything to write home about. SO anyone reading this don't be fooled by "budget value set for a beginner" Tekton is making a high quality tool that should last you for years.
@michaelkolbe5963 Жыл бұрын
I've used Craftsman for years and the old ratchets I've kicked rusty tire lugs off with a 1/2" Craftsman .Today's Craftsman since they left USA have been junk you would strip gear for sure .Highly doubt that Tekton yester year or today is even close to the quality of Old Craftsman ratchets .
@irongoose3865 Жыл бұрын
@@michaelkolbe5963 Honestly I wouldn't even try to take a rusty lug off manually. With that said I don't believe my 34 year old 1/2 drive ratchet would hold up to it either with a three foot long pipe on it.
@phtevenmolz5030 Жыл бұрын
I think Tekton is fine for the DIYer, but speaking from heavy use as a professional, it’s not ok for pros. Especially not for the sockets that will see substantial, regular use. I’m an aircraft mechanic, so my sockets are mostly 12pt SAE with a set of 6 point for specific uses. The Tekton sockets that I purchased to fill in some gaps had already started rounding internally by the 6 month mark. It’s the worst on the smaller sizes that see regular use, like 5/16-1/2” in 1/4 drive, but some of the larger sockets also show signs of significant wear. By comparison, my 20 year old Proto sockets and my fairly new Snap On sockets show literally zero appreciable wear. I believe the Tekton sockets are made with too soft of an alloy. I also have gripes about their 1/4” and 3/8” ratchets. My primary ratchets are the regular T72 and F80, but I purchased the Tekton 90T ratchets because they offer a little extra leverage and supposedly less arc swing. However, the backlash is significantly greater than the Snap On and the backdrag is also much heavier, which effectively makes the lower tooth count SOs work in much tighter spaces. And the worst part are the switches that change direction on a whim.
@irongoose3865 Жыл бұрын
@@phtevenmolz5030 I like your input on The Tekton tools and you certainly sound like you know what you are talking about. I used Craftsman and Snap On professionally for years and never experienced those problems with sockets. I really felt The Tekton stuff was a equal to The Craftsman sockets though. My friend really likes the set and has been using them for a couple of years now and hasn't broken anything yet. He'll probably break the breaker bar eventually though, it's a total piece of junk.
@MiguelGarcia-nl3ci 3 жыл бұрын
I want to get a 1/2 set as a emergency but I dont want the 10-14mm sockets
@BigPaPaRu 4 жыл бұрын
Man it makes me happy to see no filler
@whitelightning5937 3 жыл бұрын
At the same time a beginner kit should include “fillers” for the real beginners
@stevetotten5565 3 жыл бұрын
Love my 1/4" drive Tekton set .
@bobbygarrett9588 5 жыл бұрын
Good choice on your new logo! Great Video, Tekton has came a long way!
@ClientGraphics 5 жыл бұрын
Bobby Garrett Thanks Bobby, and yes Tekton has come along way and pretty quickly in the past 2-3yrs.
@donaldhollums3278 4 жыл бұрын
I paid almost the same money for the Carlyle set. It's a six-point, metric set. But, it's only has the shallow sockets. A great ratchet with only the 36-tooth mechanism though; even for using it, a six inch extension, and a 16mm socket to rotate the engine on a Suburban. The set ain't used everyday. The Tekton set is definitely a great value. I have looked at the Quinn 1/2" drive deep socket sets I may look into the Tekton version instead when I need them in the future.
@mikewest8836 3 жыл бұрын
I agree with Iron Goose, this is simply a quality set of tools at a good price (with he same warranty as Craftsman or anyone else for that matter)
@andybub45 3 жыл бұрын
My favorite tool company is Tekton. If I need a new tool, I check to see if Tekton has it first!
@derekquinones8614 2 жыл бұрын
I have the 3/8 74 piece tekton set and I tell ya what such a great value I only paid 130 for mine and it does include the 90 tooth ratchet good review by the way!!
@410AutoTech 5 жыл бұрын
Really do like the entire set and price reasonable!! Never owned tekton yet !!
@c.r.edmister5223 4 жыл бұрын
*I like the 72 tooth for 1/2" under high torque. I trust it.*
@the_boatswain 2 жыл бұрын
I only own (1) Tekton tool, but I like it. My mechanic tools (as of now) are comprised of Dewalt brand sockets supplemented by Capri Tools ratchets and accessories (among other things). I can't personally justify the tool truck because I only tend to brake tools very rarely. I'll take a closer look at Tekton next time around.
@gogetyourowngear4251 5 жыл бұрын
I have this set love it use it all the time never had any issue with any of it
@ClientGraphics 5 жыл бұрын
Love hearing comments like yours. I enjoy my set as well just took me awhile to finally do a video on mine to share.
@Eggomania86 4 жыл бұрын
Even as a pro most of the time you use your impacts, for my chrome 1/2" drive sockets these are great! I like mine! Personally I'll put them up there with the tool truck brands.
@corycg9624 Жыл бұрын
Tekton is really good
@ClientGraphics 5 жыл бұрын
Make sure you are choosing the right tools for the job and check out Tekton at bit.ly/2m9jMOr for all your Tekton tool needs.
@hey.hombre 4 жыл бұрын
I ordered the 1/4" drive 6 and 12 point sockets sets and the 3/8" 6 point socket set. I like them because you don't get the socket bits or other items you don't want. You can order those in another kit. I wasn't looking to by a 1/2" dr set because I don't have a truck anymore. I just do small stuff on car. If it's something major it goes to a shop. But a 1/2" set would be nice to look at and fondle.
@I_Died_2_Weeks_Ago 3 жыл бұрын
🤣
@miguelplascencia6093 Жыл бұрын
I had the 1/4 & 3/8 mm set and I love it I use the 3/8 box a lot I already broke the 3in and 6in extensions hopefully the warranty them I broke the 1/4 ratchet and they warranty it with no problems my next buy is the 1/2 set
@ifitsnotbrokenfixit1193 5 жыл бұрын
Thanks for the video Client.
@danmckevittstoolsbagels3258 5 жыл бұрын
Love the logo, I am a huge huge huge fan of tekton tools. I'm slowly and surely annoying them until they send me something hahahaha
@beardedtoolreviews7185 3 жыл бұрын
Lol that's what I'm doing also just with CapriTools.
@captainjerk 5 жыл бұрын
2:01 Looks like a shot glass! :D Sweet socket set buddy! I will probably have no use for a set like this, but thanx for the show!
@ClientGraphics 5 жыл бұрын
That would be a heavy shot glass. Now I legit want one so I probably cant find one or they will be really high $$$.
@captainjerk 5 жыл бұрын
@@ClientGraphics Weld up the hole so it holds a shot! LOL :D
@christopherelrod8788 3 жыл бұрын
I got me the big metric impact set. 10mm-36mm. 250 bucks is a damn good deal. I never use the sae stuff. And i have found on big socket sizes sae and metric are really close
@MISERSTYLE 4 жыл бұрын
@client graphics can you please do a combined current review (now in 2020) or even just a table top talk of Mikwaukee vs Tekton vs Craftsman? Hitting on 3 points: tool quality, best return policy, and where they're manufactured? All while also mentioning how these 3 compare to big American made tool brands like Cornwell, SK, Armstrong, and Wright?? Please Thank you!
@Toyotas_n__Tools 5 жыл бұрын
Chris I agree this is the best half inch set for beginners and the next best would be proto/mac for their thickness which isn't as thick as the rest so they fit in tighter places.
@ClientGraphics 5 жыл бұрын
Yota Doug's Tool Collecting Channel I remembered back you also mentioned getting bigger sized 3/8” drive sockets as an option which totally work. You just have to be cautious of torque specs and know your and the tools limits.
@ClientGraphics 5 жыл бұрын
Yota Doug's Tool Collecting Channel I survived many years buying Proto and Stanley USA singles but that’s cause money was tight and good options were expensive. I wish I could have gone with this set and then replaced what broke under warranty and buy singles of what I truly need.
@Toyotas_n__Tools 5 жыл бұрын
@@ClientGraphics Times are changing for the better when it comes to tools these days! I'm grateful for it! and as to the larger 3/8 sockets... Thanks for reminding me that LOL.. I have that BIG 3/8 fhllfd80
@aaronritzenthaler 3 жыл бұрын
If I’m grabbing 1/2 inch, I’m 90% off the time grabbing an impact.
@Tyronetrinity 4 жыл бұрын
GreyPneumatics Duo sockets are awesome too because it covers both chrome and impact, and doesn't skip all the way to 36mm and up to 11/2in. however u have to buy shallow and deep separately when u pick up the 1/2 sets. good pick up though.
@alexlaney3423 4 жыл бұрын
I've been trying to justify buying their full set of flex heads
@TheFlatlander440 5 жыл бұрын
Darn nice Tekton socket and ratchet wrench set. For the price point at $200 smackers it's well worth the money for quality tools. I don't own any Tekton sockets or ratchet wrenches but if should decide to upgrade from my old original Craftsman Made in the USA sets, this is probably the set I would choose to purchase, Thanks for sharing. Cheers!
@ClientGraphics 5 жыл бұрын
No problem Sir. As you can see I have some older Craftsman USA just not the complete coverage that I wanted and that’s why I purchased this set last year.
@410AutoTech 5 жыл бұрын
Had to pause the video and say fantastic logo!!
@ClientGraphics 5 жыл бұрын
410 Auto Tech Thanks Buddy! Still thinking of ideas for the MotivxTools set.....
@andyeighttre 2 жыл бұрын
Tekton is where you should be looking as a great alternative to the SK/Proto/Williams/Wright price point. I’ve been looking for a comparison of Tekton, Capri, Sunex, Carlisle, Icon, Milwaukie, and Gear Wrench.
@jophillips2868 2 жыл бұрын
Entry level they're just as good as snap-on or any other over priced tool truck products.
@staceyward9841 2 жыл бұрын
Totally agree with you sir!!! Snap-On is an Indian word for pull ur pants down and let me screw you up the but !!!!!! Period, just look at some of the torture test comparing the two!!!
@mgpadi 4 жыл бұрын
Very Nice logo. I really enjoy all your videos. Thanks
@ClientGraphics 4 жыл бұрын
Thank you
@QUANTRELLBISHOP 2 жыл бұрын
I use impacts on all my half inch sizes other then that that is a beast kit
@LEGOCAMARO 5 жыл бұрын
Not a bad set would have definitely went that route and bought snap on 9-14 for professional use.There deeper neck but the rest would work no problem in a professional environment
@markquinlan6406 4 жыл бұрын
Wow nice set
@boosted2.4_sky 5 жыл бұрын
3:00.. I too have noticed that there are Tekton tools that are similar.. well exactly the same as some Pittsburgh tools... nothing against Tekton. ..I like Tekton tools... I have their complete screwdriver set and a couple of the 90 tooth ratchets... I have the bent handle 90 tooth and some combination wrenches that I gave to a co-worker when I upgraded to Milwaukee... but this is a decent set... for the same price the DeWalt Mechanic's tool set is a little more complete though...
@ClientGraphics 5 жыл бұрын
Craig Cundiff You’re probably referring to the DEWALT Mechanics Tools Kit and Socket Set, 204-Piece (DWMT72165) which is a great set for coverage across 1/4,3/8, and 1/2. Doesn’t provide the same coverage in 1/2 as it only goes to 24mm and 1” I believe but if I could have started with that set 20yrs ago I would have thought I was the Boom!
@jasonanderson8528 4 жыл бұрын
I like that duralast ratchet
@SgtJoeSmith 5 жыл бұрын
Good logo👍
@SgtJoeSmith 5 жыл бұрын
Joe Smith not heard of that brand. Looks like nice set. Thanks Chris
@ClientGraphics 5 жыл бұрын
Joe Smith Thanks Joe Smith and Happy Friday. 🍻
@dominiczamora3493 5 жыл бұрын
Nice set!
@ClientGraphics 5 жыл бұрын
Thanks Dominic!
@corygriffiths4394 Жыл бұрын
I’ve been trying to finish getting the 1/2 sockets I’ve been buying them individually I have a DeWalt 1/2 socket set but it only goes up to 1” not 1-1/2 and in metric it goes up to 24mm so I’m going to get the rest I’ve been buying Tekton sockets individually.
@user-gp8iz7rz1i 3 жыл бұрын
Thank for that very detailed side by side review of the older vs upgraded version of the 1/2 set. Any change on your personal opinion about the build quality between the two, in regards to the sockets? I've noticed in the newer set all the socket are more slimmed down, and not as robust, at least by the naked eye. Am looking to pick up a 3/8 set in the older configuration, before they run out completelly. Just looking for your 0.02 please. Regards!
@YourAssAintSafe 2 жыл бұрын
Based on reviews the newer set seems to be better especially the ratchets. I personally havent had any problems but I use my tools correctly. If you have any doubt buy on Amazon before a project and if they dont meet or exceed your standards then return them. The tools are backed for life so you shouldn't have any problems.
@flexapex9801 3 жыл бұрын
Worth every red cent.
@DiligentDave1966 10 ай бұрын
Great warranty too.
@kencama2671 4 жыл бұрын
Wow, too late I already have a set. Nice!
@christopherwilliford5831 3 жыл бұрын
Grey pneumatic is also great and all there stuff is impact rated you can get 1/2 shallow set from 10mm to 36mm no skip for $86 and deep for like $110 im in industrial maintenance btw
@ClientGraphics 3 жыл бұрын
I have a few things from Grey Pneumatic and they have been solid products.
@JustinDowDIYcentralhighway 5 жыл бұрын
Nicely done. Very well explained. 🍻
@ClientGraphics 5 жыл бұрын
Appreciate you watching and commenting on my video. Hands down it absolutely made my Monday the best in a long time!! Thanks buddy.
@JustinDowDIYcentralhighway 5 жыл бұрын
ClientGraphics No problem Brotherman anytime. Great job again.
@sugargoldy 4 жыл бұрын
New subscriber love your Channel
@ClientGraphics 4 жыл бұрын
Thanks, Darrin.
@tonykendrick618 3 жыл бұрын
Hows this compair with the gearwrench set? Im trying to decide between the two.
@user-gh5if5oo2f 3 ай бұрын
Has this been updated to include the 90 tooth rachet?
@felixf5211 5 жыл бұрын
The logo looks good.
@ClientGraphics 5 жыл бұрын
Thank you Sir! It was a suprise from my wife she found it and help craft it to what we see today.
@sirkdopsah1081 4 жыл бұрын
Their composite ratchets are the same as the black and grey Pittsburg ratchets too.
@justine4045 3 жыл бұрын
I like it
@truckerpeterose 5 жыл бұрын
I think I agree with you about the older sockets being better. I am gradually buying the 90 tooth ratchets to replace the ones in the old kits. I bought the 1/4” , 3/8” and 1/2” sets weeks before the new ones were released. I was extremely disappointed I didn’t have the updated sets. I was gonna purchase 3 new sets but Tekton wouldn’t even offer me a discount off the newer sets. I guess they don’t have to but it was definitely a sour experience. If I had known I would have held out for the newer sets. And these old style ratchets are junk. I am sure they will hold up pretty good but they just feel cheap.
@chiefskingdom6686 3 жыл бұрын
$375 for 1/4, 3/8, and the 1/2 inch sets!!!! GREAT BUY!!
@agentcoleslaw5369 4 жыл бұрын
Do you have them on a socket rail? I tried to put this same set on an Ernst 19” tray and it didn’t fit all of them
@mmedia5727 4 жыл бұрын
Hi sir! Nice vid! Can you measure the tool box L x W x H in inches? And may I know how much it weighs? I am planning to have it shipped to my country. Thank you. :)
@jackhammer9622 4 жыл бұрын
Do you find yourself reaching for more often your gearwrench or tekton ratchets?
@bryansmith5980 3 жыл бұрын
Hey all I need the measurement on the blow mold case for the 1/2 inch drive 84 piece set, I am going to order it but I am planning the new home for my tekton sets? 1/2 inch is next. H W D
@jacobmarvel3474 3 жыл бұрын
For $400 you can get the whole 1/2 set 3/8 set and 1/4 set hell of a deal pretty much every socket you will ever need besides speciality and 12 point
@justine4045 3 жыл бұрын
I want like that set of Teton set
@jeffreydevoti7000 3 жыл бұрын
Since everything is metric today, including inch sizes is almost worthless unless you need to train a Dodgeball team. Should sell a ratchet group with accessories, i.e. extensions, universals adapters; then select either Metric socket sets or standard socket sets. I experienced the opposite, bought my Craftsman tool set in 1978 was ALL standard. Then over the years had to buy Metric. Since the majority of work on modern cars you only use smaller sizes, unless changing out FWD axle shafts, and your set probably doesn't go that big anyway. Most tools will NEVER be used, their there "just in case" you might need them.
@ilearnedsomethingnewtoday6193 3 жыл бұрын
Peterbilt and Kenworth use a lot of both
@YourAssAintSafe 2 жыл бұрын
They have metric only with accessories they just dont come with a breaker bar
@cameracamera1319 2 жыл бұрын
I have 7 boys. 16 to 6. I have new ls trucks. New fords. And 15 to 20 C10 to K20s. I need both.
@SDMFTommySick 4 жыл бұрын
They will send you the new one. They sent me a new style flex ratchet when my old one's flex joint snapped.
@corycg9624 Жыл бұрын
I think I have most 1/2 inch drive sockets now the largest SAE socket I have is 1-1/2 and the largest metric socket I have is 36mm I have different brands in 1/2 inch drive DeWalt Tekton Craftsman and Jobsmart from Tractor Supply I have a mix between 6 point and 12 point in my opinion it’s good to have both 6 point and 12 point instead of just all 6 point or just all 12 point.
@eyang7 3 жыл бұрын
Nice. I was gonna plan on getting this. How is it holding up?
@beardedtoolreviews7185 3 жыл бұрын
Is the chrome as nice as CapriTools?
@user-gh5if5oo2f 3 ай бұрын
Have you done a 2024 update?
@robinglover9660 3 жыл бұрын
You guys in the us lucky in the uk we don’t have the range of choice you get with tools
@mikehenthorn1778 3 жыл бұрын
for what the warranty is worth? it is worth lots. i managed to break an allen wrench and a quick photo sent to Tekton and i was sent a new set of wrenches. no problem or hassle. and if you break the old ratchet they will send you the new one. they don't have any of the old stuff.
@1234cdsarver 4 жыл бұрын
Cool
@jusrobington 5 жыл бұрын
I wonder if they will come out with a impact version of this set. That would be awesome 😁
@ClientGraphics 5 жыл бұрын
Rob Muss Such an awesome idea and I’d probably jump on this same sized set in all impact if they made it.
@Brett_S 4 жыл бұрын
www.tekton.com/1-2-inch-drive-6-point-impact-socket-set-sid92407 It is out there now. 👍
@maurojuan5667 3 жыл бұрын
I don't know but a 10mm 1/2 inch drive socket is a little excessive??? Well I think so🤷🤙
@tnasituning8173 Жыл бұрын
This would be even better if it had the 5/16 like some other 1/2" Drives, but it does make up for it on the other end with the 1 5/16" as most only go up to the 1 1/4"... Also wouldnt mind paying $220~$250 if it came with the 8mm, 9mm, 33mm,34mm,35mm, 36mm, 37mm, 38mm, ajd even a 39mm like OEM Tools has in some of Their kits but a 39mm isn't necessarily a deal breaker
@jacobearhart4170 3 жыл бұрын
I find it hard to believe the sockets didn't fall out and doesn't even need that thin shitty foam mat thing!! That's amazing!!!
@MonStruO72 5 жыл бұрын
Me want!!!
@raynelyfe1083 5 жыл бұрын
I’m sure aeddon is proud
@ClientGraphics 5 жыл бұрын
Yes, he thanks you for watching. Now don’t say out too late.
@atticusmiller5406 4 жыл бұрын
Is there still a warranty if I ordered on amazon?
@ClientGraphics 4 жыл бұрын
Yes, there is a warranty even if ordered on Amazon. They are always Guaranteed no matter the place of purchase 👍🏻
@anthonyarnold906 4 жыл бұрын
Are these tekton a tad better than the comparable craftsman’s?
@TheTyrial86 4 жыл бұрын
Yes. Better.
@jes6628 3 жыл бұрын
meh, i have this and i wish i just skipped chrome and went straight to impacts, i beat the hell outta the ratchets in the sets though and they have held up
@kiyosenl.3889 2 жыл бұрын
They have since updated all their ratchets in these sets to the 90 tooth versions
@evanhaberberger5717 4 жыл бұрын
Will this fit folded out in a hf 5 drawer tool cart in the top
@ClientGraphics 4 жыл бұрын
It will fit closed in the bottom drawer with literally no extra room. Its like 22" x 15" x 4.5"
@evanhaberberger5717 4 жыл бұрын
@@ClientGraphics awesome thanks a bunch
@evanhaberberger5717 4 жыл бұрын
@@ClientGraphics so .... no on the top
@ClientGraphics 4 жыл бұрын
Definitely can’t fit folded out as it would be 44”x30” when it’s opened up. It does fit and close and you could swing it up and have the back rest on those spring locking mechanism by the hinges. and it does fit between the cut outs for pry bars and screwdrivers. I haven’t taken everything out of the top but it does look to like clear the front lock mechanism so you could close the 5 drawer cart if the case is closed
@ClientGraphics 4 жыл бұрын
Now I’m curious I’m going to take everything out of the top and see if it fits how it fits and post some pictures on Instagram for you
@clarencewesson7997 7 ай бұрын
5/16 drive
ClientGraphics
Рет қаралды 1,3 МЛН
Jason Derulo
Рет қаралды 122 МЛН
Project Farm
Рет қаралды 4,4 МЛН
ClientGraphics
Рет қаралды 878 М.
TheChristianMechanic
Рет қаралды 821
Jason Derulo
Рет қаралды 122 МЛН