It’s awesome how you carry the knowledge from a previous job to doing another job the same. You done a cracking job Chris always learning on the next job. One hell of a hard working bloke you are Chris. Love the video 👍👏🇨🇦💕

Always use original hoses in booms Chris . They are made with thicker hose and hold there shape better when fully extended. . They do cost a fortune but been stung before too many times .

After D&J boom job I thought you would stay away from those units. lol!

In future chris for swapping removing boom hoses - Disconnect all the hoses at the front of the boom - Attach a long bit of rope to the end of each hose (ideally longer than each hose) - pull them all out of the back of the boom - disconnect them under the boom then pull them out from under the boom - attach new hoses to the rope that's coming out under the boom and pull them through one by one from the back using the rope until it comes out the back - do this for each one - then pull on the rope at the front of the boom to pull each hose through one by one making sure they slide through the guide at the back of the boom in the correct place Saves removing the boom 👌

As soon as I saw the job, I thought about the D&J version you did of the smaller machine, bloody good job Lill's was there to point you in the right direction

Absolutely brilliant video as always Chris!! I’ve even got my Mum & Dad and Wife watching you now 🤠 You bring happiness into everyone’s lives around you mate. You’re an absolute legend and a true grafter!! I really hope I can meet you in person one day 🤞 All the best to you, Mum & Dad and all the family mate 🙏🤠

Chris you are a legend And hard worker Top man 👍👍👍

Another brilliant and funny video Chris whoop whoop 💥💥💥💥💥👍👍👍👍👍👏👏👏👏👏

Great video Chris and great content You, Sean and Lee were so funny Chris I was a telehandler driver and mate that bit you called the wee bit you should of put back on because when the arm is fully boomed out and then you bring it back in that part guides the pipes so they stay straight and it stops them from curling up and getting pinched between the boom and it's cover. As normal Chris it was a bloody good show ye it was, See you on the next one Chris Whoop whoop

Hi Chris. Another great video. You mentioned the fuel that the generators would consume. I will give you the calculation What you do is take the KVA multiple x0.8 that’s it now KW multiply that x0.27 that’s full load fuel consumption for 4 pole 1500 rpm generator. Eg. 100 kva x0.8 x0.27 =21.6 that’s max fuel consumption full load. To get full load take KVA plus 40% that’s full load eg 100kva plus 40% v140 amps per phase full load. That was long winded for your info 😂😂😂😂🏴󠁧󠁢󠁳󠁣󠁴󠁿Raymond ex retired generator sales rep🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿

Wow this is awsome! I just did this same job on my channel 😃. You had a much easier time getting out than I did. I love your channel, always a bloody good show! Thanks for struggling for us✌️

Good video, entertaining and informative. Very enjoyable.

Oh no not the old boom struggle Chris,keepin it real love to all south of England

That was me hanging out the window at you in Arnold. Sorry mate you know I'm a proper fan boy 😂😂😂😂

The telly handler struggle go on Chris bloody good show keep up the struggle mate Yh u will woop woop

Great content again keep up the great work .

I absolutely love your content, proper on site real life fixing.

X2 ropes one either side on both hoses keeping the pairs on either side of the boom 👌🏼👍🏼

Lovely job Chris yes it is! Woop woop see you on the next one yeah you will

Bloody good show Chris the JCB telehandler struggle. 🤙👍🍻

Hi Chris. Great vid again mate. Came in handy doing the job for Dave at D&J. He works with your preferred payment Chris (Frosters). lol. 👍

Awesome video thanks Chris very much appreciated top job 🚜🛠️🔧🤑🤑😎🚜🚜🛠️🔧

chris i came across you bye mistake a while ago now a i did a bad thing and thought you was a boge and scarper guy.... after watching you for the content i gotta say sorry, you are the best at the job and the knowledge is crazy. i try not to miss an episode nowadays yr amazing

Great video Chris,you and sean make a good double act,keep on struggling, whoop whoop.

Thanks for the video Chris!🇨🇦

Chris you young chappy..... You can do them pipes with boom in place, undo at head end tie rope to.....pull out back of boom. Then take of "U" pipes in pull completely out. To fit..... reverse order, pulling new pipes to back with rope then to front with rope..... Try a 17mtr JCB with 3 booms😭😭😭

Another great video as always Chris and Leahdag and family boom 😂

Think you will find that block you left out goes on the inside of the boom to secure the pipes, under the ram not the outside as you both fitted, previous misfits might have fitted it the way you tried, but yes it is needed to guide the hoses, would hang onto it for next time, which is why the metal pipes got bent by that rack floating around, that’s crazy the way them Quick Release Couplings (QRC) held in.

Bloody good struggle 💪💪like how you was laughing all the way through that job😂😂seem a good bunch of lads👍has the dog gone soft?🐕keep up the brilliant struggles 👍👍💪💪

Great video Chris 😂

Hey Chris I work on this type of equipment a lot. And the hoses are too long but there's too much play in the rear boom wear pads that's what's causing the hose to rub and fail.

Getting to be a forking expert on them now Chris boom😂😂😂❤

oh wow that looks like a fun job haha what a nightmare need a lot of patience fitting those pipes. The plate must be there for from stopping the arm going out too much maybe. So it does not exceed its limit that's what I'm guessing . But I dont blame you not putting it back in what a crap job to put it back in how would you do it haha. Love watching your videos keep on struggling on whooo whoo :)

Brick Grab Good idea Chris I’ll Remember that One always one Knocking around a Site You learn Something new all the Time Thanks 🔧

Alright Chris great to wee job done and great video 👍👍👀🍺🍺

Love it on my day off. Keep them coming Chris.

Good job buddy 😊 I hope you are all well

Nice to meet a new customer Chris yeh it is woo woo 😂😂

Them are the type of guys I'd have around, just getting it done and laughing on the way.

Nice one Chris , great struggle 👍

I can see metal in the eye again soon , think it’s time to remind you how much pain you was in last time , you only get a pair please look after them 😅

Seans a gas lad. Rare not to have to work for a stuck-up moaner. :-) We like Seans, we do. Top Geezer. Very laconic. Even Leeldawg likes Sean.

You do make me laugh 😂 I watched your video it was a struggle 😂😂

Always great content chris keep them coming

13:40 waiting for the spanner to fall onto the phone 🤣😂🤣😂🤣

I just had to watch this one chris u be struggle like bollocks on the exact same machine!! 🤧🤧🤧

Great job again chris

That machine will never rust the amount of oil you’ve thrown all over it!😂😂😂

Brilliant mate it's like all the BMC I've worked on if Jon boy been there I won't have bottom 🔩 in starter swines 🛠️⚓🤠 JB

BOOM SHAKE SHAKE THE ROOM!! man we listened to some crap back in the 90s

Hi Chris you want genuine boom pipes. They never work been made. Great video

The power generators are gas powered turbines which boost the supply to the grid when all the fabulous “Green” energy fails us because there isn’t enough day light, too much or too little wind

Whee bits!!!! My disco td5 has lots of them which now live behind the shed😂

Freaking brilliant

Excellent job...

Always use genuine pipes when it comes to inside the boom. You can get some made up but never know if the originals have stretched!

Bloody hell looks like u need a visit to tool shop

Think Strugglers Farm is going to set a new trend for Christmas Pumpkins if you haven't got your seeds planted April early May

Bloody good show

Make an end to screw in hyd pipe ends and use rope to pull out and in insitu

You definitely need that bracket on keeps the pipes online you will definitely be back doing it again

Kinda major important part that dumb bit of nylon it's actually in there to stop you shearing the four pipes off when you smack the bucket down on the ground the back of the boom can't guillotine the pipes of with that in place but a pig to fit alright.

Chris , Lee must be the new dog 🐕🐕🐶🐶🐕‍🦺🐕‍🦺whisperer with Leerdag

hoses have crossed over Chris. Looks like the finger plate at the bottom is loose

No need to remove boom my G!!just tie rope to pipes pull through old pipe then tie new pipe to rope and pull back through SIMPLES

Good Diesel Mechanic this man is you can see he was trained by Old School men when he was an apprentice, ( No fail not an option fancy younger lads in Their Monster Vans wouldn’t Catch him. He’s Too Clever

Without the white but wont the boom hit the pipes if you push down?

Lill ;s like a coiled spring , just waiting to go !!

Wing it you'll do it not a problem

I’ve got a workshop full of bits what didn’t make it back on my projects mate 😂😂.

love it chris

Boom boom shake shake the room….telehandler struggle day….👍😜🇮🇲👌

Are they pins the stops for the boom when it’s right out

Boom shake shake shake the boom 😂

has li'il dag just been to a prince concert. purple rain.😅

Whoop whoop it's a Wednesday struggle

dont mean to be a party pooper but that white thing you threw away is to stop the boom nipping the pipes when you power down

Good man...lol....Excellent but stinks that oil...

3:22 get your rubbers out Sean here Chris comes 😅😅😅😅 👋🤠👍

Always Busy, Cheers

2:39 boom boom shake the room 👋🤠👍

Great video man keep it real cool. Yours ratty10

I've had to do them hoses on one of them teles Chris bit of a shit job on them Machines not as nice as the jcb Keep up good work mate

Always use an Imperial adjustable spanner 🤪

BoomBoom just shake shake shake the boom

There Italian goodness these machines Tom pemberton on KZfaq has a new one on demo

Always genuine pipes up the boom mate otherwise in my experience you’ll have trouble in the near future

2:16 booming Eck 👋🤠👍

its a Fkn Ferret haha

Next time, if you ever have to do these hoses on ANY make of telehandler, GET GENUINE ONES! Made up ones are never as good.

I repair forktrucks there’s not a jcb I’ve liked yet. Avoid them like the plague.

There is some one putting short clips on you tube I seen one a couple of days ago and all different clips off your channel so I gave him a nasty comment saying you have been told about and a piece of my mind (hopefully it wasn't you) the low life you love fixing them tele-handler don't you after that bracket and pipes on that small one you enjoy the struggle you win fix anything 🤠🍻🍺👍

Your lucky then it’s normally the phantom 10ml 😂

Woo woo it’s Wednesday yeah it is

💥💥💣💣🧨🧨

Sent you an email Chris about curtains

💪🤙👍👊👌

Did I see you grinding Chris with no safety goggles on !! 🧑‍🦯🦮