Teraflex 4" Short Arm Lift Kit Install

Teraflex 4" Short Arm Lift Kit Install - HavocOffroad.com

Рет қаралды 42,545

Havoc Offroad

8 жыл бұрын

Klay installs the Teraflex 4" Short Arm Lift Kit on a 2015 Jeep JK.

Пікірлер: 40

@yetanother4x4channel22 7 жыл бұрын

Excellent video. Good camera placement, good lighting, good narration. All the steps covered with smooth flowing edits. Excellent.

@luisbarrios4717 3 жыл бұрын

I just ordered the 4 inch lift from teraflex. this video give me confidence in stalling it myself.

@427vot 6 жыл бұрын

Thanks for the assist! Excellent video!

@badkarma2269 7 жыл бұрын

Great Video!

@matbax69 8 жыл бұрын

This saved me !! Thanks heaps !

@HavocOffroad 8 жыл бұрын

+matbax69 We appreciate it! Thank you!

@keithlea6804 6 жыл бұрын

Best vid ever

@cowill8674 8 жыл бұрын

loved video, great step by step, but the drive shaft wasn't mention, what was that drive shaft attachment for and what was the use for it. thanks and all your vidz are helpful for DIY

@HavocOffroad 8 жыл бұрын

+Marco Williamson It is the JK Rzeppa High Angle Factory Replacement CV Kit, it allows you to retain your factory driveshaft while also having a lift higher than 3". There is a video coming soon for that parts install! If you would like to order it call the experts at 18554606800.

@seanmiller140 4 жыл бұрын

I just purchased the same Terra Flex lift (but it’s a 3 inch) for a 2017 Wrangler Sport. (2 door) Do I still need the Drive Shaft Joint, and Exhaust Extension? Thanks, great video.

@jimlayhey1965 5 жыл бұрын

will i need wheel a alignment on my jeep jk if i upgrade to taraflex sport front control arms my old control arms are mint no bends 1 tear old

@andrewdygas796 6 жыл бұрын

What size tires are you running on that's jeep?

@DarylRosenberg01 6 жыл бұрын

Went to your website and Jeep is not an option when looking under suspension. There is no way to look at the kit in this video

@brycecarnes5391 7 жыл бұрын

What is the front bumper on the jeep?

@HarryMcKinney 8 жыл бұрын

What size wheels/tires are on the Jeep at the end of the video?

@HavocOffroad 8 жыл бұрын

+Harry McKinney They are 37" tires on 22" wheels. Thanks for the question!

@russziller4033 7 жыл бұрын

I have a 2016 Jeep Willys. While is stalling the back spacers (thing that looks like a nipple) i also installed the factor isolator over it which was in the manual. The nipple never made a sound when it was seated but its center. However, I notice when I look under the jeep the nipple I would think should be at a 90 degree angle but it’s not. It’s at a 110 degree angle and it moves around. I have put 100 miles on the jeep since. Is this an issue or will these nipples just sit like that when all the weight of the jeep is on it? Can you please help with a valid answer??

@HavocOffroad 7 жыл бұрын

Would you be able to take pictures and email them?

@russziller4033 7 жыл бұрын

Did you ever get the pics i sent?

@vinishshetty8055 7 жыл бұрын

So basically you install a 4 short arm lift it wont effect the factory wheel base? and there is no need to chop or grind and alter the factory jeep.will 35 tires look good with that kit?

@HavocOffroad 7 жыл бұрын

Wheel base will be retained when using adjustable control arms, caster can also be adjusted. You will need to find a alignment shop that will be willing to make control arm adjustments. 35" tire will fit no problem.

@vinishshetty8055 7 жыл бұрын

thanks

@HavocOffroad 7 жыл бұрын

You are welcome Vinish!

@lxstangs 7 жыл бұрын

having a lift is way better ! Hahaha

@HavocOffroad 7 жыл бұрын

We agree!

@AhmedShawkyAAST 7 жыл бұрын

what are the lengths of the 8 control arms for a 4 Door jk 4" lift?

@HavocOffroad 7 жыл бұрын

Hi Ahmed! Great question. The control arms are adjustable. The upper front control arms need to be set to 19.5" to start with. The lower front control arms need to be set at 23.75" to start with. The upper rear control arms need to be set at 18.3750" to start with The rear lower control arms need to be set at 20.3750" to start with. The reason I say "to start with". These arms are adjustable so depending on wheel, tire and drive shafts the customer is using these control arms can be dialed in to fit his/her needs. Caster and wheel base are adjustable.

@AhmedShawkyAAST 7 жыл бұрын

Havoc Offroad I had no problems installing the front control arms with these settings but when the rear ones were installed with the given settings 18.375 & 20.375 (46.7 cm & 51.7 cm) the springs weren't standing straight, they were forming a C shape... so I added 5 cm to each rear control arm to make the spring standing straight... is it correct what I am doing?

@HavocOffroad 7 жыл бұрын

I would not adjust them that far "out". that is almost 2 inches. Having a slight C shape in the spring is common. Please contact Tera Flex for more detailed answer. They are a pleasure to deal 801-713-3314