TeraFlex Install: JK Falcon Bolt-On Rear Shock Skid Plate
Рет қаралды 20,983
Күн бұрынteraflex.com/jk-falcon-bolt-o...
Although our Falcon piggyback shocks are designed to take a beating with their nearly indestructible hard anodized 6061-T6 aluminum construction, we offer a pair of Falcon Bolt-On Rear Shock Skid Plates to give the serious off-roader that extra peace-of-mind when leaving civilization behind.
The Falcon rear shock skid plates for the JK and JKU are constructed from 1/4” cold rolled steel with a textured black powder coat finish. As with the mounting hardware on our Falcon shocks, the rear shock skid plates’ Eco-Guard mounting hardware has survived the 1,000- hour salt spray corrosion test.
INCLUDES:
• Two (2) bolt-on rear shock skid plates
• All necessary hardware
FEATURES & BENEFIS:
• Constructed from 1/4” cold rolled steel
• Textured black powder coat finish for looks & durability
• Eco-Guard mounting hardware passes 1,000-hour salt spray corrosion test
• Designed specifically for JK rear Falcon piggyback shocks
• 100% bolt-on installation w/ basic hand tools
• TeraFlex Lifetime Warranty
INSTALL TIME: 1 Hour
@MrKendu 6 жыл бұрын
They should be free for those who buys a top of the line set of 4 Falcon shocks which I did.
@robertstewart2518 5 жыл бұрын
Yeah, I agree and would argue that due to this design they should be included, if for nothing more than just peace of mind..
@jimlayhey1965 5 жыл бұрын
@@robertstewart2518 i agree
@FairlyHonest 6 жыл бұрын
Awesome 👍
@danielbarrettii1410 5 жыл бұрын
Spend $ on top of the line equipment for Jeep should come with just my 2 cents
@jameswilliamson7355 6 жыл бұрын
What drill are y’all using?
@pssita 6 жыл бұрын
Is this required for the 2.1 series falcons?
@teraflexsuspensions 6 жыл бұрын
It is not required, we offer the shock skid plates to give the serious off-roader that extra peace-of-mind when leaving civilization behind. It will fit any JK Falcon Shock (2.1, 3.1, 3.2, 3.3 and 3.4)
@copperhead_jl5321 5 жыл бұрын
Definitely a must have to if you wheel your jeep a lot or do anything with rocks, I have them on mine and they have save the shocks from hitting boulders. Now just clean them and spray paint them sos they don't rust after just have scratch them.
@jimlayhey1965 5 жыл бұрын
@@teraflexsuspensions will stock wheels and tires be to close to shock or skid on a sahara 2017
@Pigsmellgood 6 жыл бұрын
Nothing for the TJ or other models yet? Any designs for that?
@teraflexsuspensions 6 жыл бұрын
Our TJ Falcon Shocks are on track to be released in January!
@Pigsmellgood 6 жыл бұрын
TeraFlexSuspensions I will wait to get shocks until January then!
@billbraski2452 4 жыл бұрын
Can I use these to protect my new Falcon 2.1 Shocks??
@teraflexsuspensions 4 жыл бұрын
You can, but since the Monotubes don't extend past the shock mount, they are not normally needed.
@billbraski2452 4 жыл бұрын
@@teraflexsuspensions I was thinking it would add protection to the mount, yes or no?
@teraflexsuspensions 4 жыл бұрын
@@billbraski2452 Yes, they add some protection to the lower shock mount.
@jimlayhey1965 5 жыл бұрын
will stock wheels and tires be to close to shock or skid on a sahara 2017
@teraflexsuspensions 5 жыл бұрын
Close to the shocks, NO. Hit on the Skids, yes. The skid plate require a minimum of 4.75" of backspacing to clear. If adding a lift over 2" you will want at least 4.5" of total backspacing.
@jimlayhey1965 5 жыл бұрын
@@teraflexsuspensions i have a freind wanting to sell me aev wheels they have 5.2 back spacing and +10mm offset will these rub on skid thank you for reply
@teraflexsuspensions 5 жыл бұрын
That is going to put you at around 5.6" of backspacing. You need a minimum of 4.75" or less. You would have to run some wheel adapters to avoid rubbing, otherwise they will not work.
@jimlayhey1965 5 жыл бұрын
@@teraflexsuspensions or i could get nomad wheels thanks for reply
@kittysch2 6 жыл бұрын
1
VictorVectorJKU
Рет қаралды 8 М.
Бондарь Анатолий & TRI MIRA
Рет қаралды 13 М.