super helpful; loved that you "called it" that the back seat is the best install spot.

Thanks for taking the effort of making the video and sharing it with others! Quite useful.

Thanks for the video, I'm about to install mine and this was helpful. I'm still in winter right now so I'm hoping it helps keep the heat in by having the reflective side facing into the cabin. Glad to hear (no pun intended) it also helps with cabin noise, that's a huge bonus. Of course I lose the view out of the roof, but I haven't been using that often. Maybe in the fall for leaf season, or if we take a road trip to a city.

That was very well done! Thanks

Thank you!

Thank you

Picked up my Model Y yesterday. The heat here is pretty bad during the summer, so i definitely need a roof shade. Also need some floor mats which is how i found your channel. Ordering the Tesmanian over the 3d as I really like the functionality of it covering under the seat part way. When i was cleaning out my trade in yesterday, the amount of just debris just under the front of the seat was fairly high even though I had weather tec mats in the truck. Those are generally hard to clean spots. The website has a 10% off code, but after seeing your video + code, I used that just so you get the credit as you put the effort forth which guided me to the product i wanted. :)

Good job getting those magnets centered in the roof. That would have drove me nuts if not close to perfectly centered. :)

How did you attach the magnets? Was the adhesive portion attached to the glass ?

Put the clips on the sunshade first! The clip part goes on the underside and the clip tabs on the top. Start the clip tabs at a 45 degree angle to the border, push in and twist so the tab is on the top, facing the glass roof. Model S. Remove the hat shelf and fold down the back seats, then feed in the shade from the trunk area. If you are installing the reflective shield, use 2 small binder clips to secure the shield on each end. Remove them just prior to sliding the clips between the glass and headliner. I used a tape measure to determine the center, left/right for the suction cups. Then I put the cups at the 1/3 and 2/3 front to back points. Putting a little bit of saliva on the cups will help them stay on longer. I then used a black marking pen to cover up the silver logo on the left front edge of the shade.

Would recommend installing the reflective shade cover on the inside for better heat reduction. 👌

Thanks. 120F to 116F ? Would have been interesting to see how much more effective the reflective shade could have been.

Didn't you install one of those auto open/close frunk devices too?

Is it possible to get those magnet from amazone? Thanks

Hello can you please make a video of the Cub Cadet and Greenworks commercial booth at Equip expo In 2022?

How have you liked the screen protector, pros and cons? Thanks

The bad news, no instructions. The good news, I don't read instructions anyway. 😁 Very nice review. I have to assume, there will be more sagging with that additional reflective cover on top. I don't wanna put magnets on my glass roof. Very nice info.

Do you still recommend the shade?

Aug 12, 2022, I just received my tesla sunshade that I ordered from the tesla web site and it does not come with magnets or the silver sunshade.

Does it stay when your window is open?

Some company is going to make a fortune if they can develop an aftermarket electric sunshade for current Teslas.

I got mine from Tesla and it doesn’t have any magnets. Any suggestions?

Why don't you have that special infrared film it will stop the heat from penetrating

it's so hot so let's put a BLACK shade.. really smart

I bought the sunshade made by Topfit. 2 pieces so no sagging and easier to install.

I watched the video to see which way the clips go on the sunshade. Unfortunately that was not shown.

I have one that looks exactly like that that I bought off Amazon, my sunroof is not tinted at all, and according to the engineers, it should be tinted. No instructions like you said., luckily, another TESLA owner help me put it on🙏🏻 I’ll leave it on you around because I have no help to put it on

Didn’t get the magnets or the reflective tarp

Isn't black color absorb more heat? It should be a different color to reflect light away from Tesla.

Why not just ceramic tint it?

Also no magnets here, original Tesla

Mine came with no magnets🤷🏼‍♂️

😅

What did you pay for that package? I paid $120 and only got the mesh part.🫤 (sorry if you said the price in the video😬)

Thank you