TESTED: Leupold Mark 5HD 7-35x56mm Riflescope (Part 2)
Рет қаралды 61,255
Күн бұрынGet this scope: amzn.to/3BotQnS
Full Story: bit.ly/38Jq5xa
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
We are back with part two of this two-part story featuring the Leupold Mark 5 HD Riflescope! In part one, we covered unboxing, features, installation, and bedding the rings to the scope tube. In this video, we'll pick up where we left off and jump into lab and field testing.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- [none]
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about
@christianfontaine2946 Жыл бұрын
This channel needs more funding. Imagine having every cartridge annalized, every Optic reviewed with such precise details,all reloading equipment reviewed with such detail.
@IMPACTSHOOTING 2 жыл бұрын
Nerding out on Data! Love it!
@Ultimatereloader 2 жыл бұрын
It takes one to know one 🔥
@joeldubose5762 Жыл бұрын
Hi , I'm shooting 1000 yards IBS competition. I'm running a 10-60×56 March Highmaster. Im in the market for another scope for a second rifle. I've been looking at this scope for a while because on a 3rd rifle (beginner rifle) I have a straight power 36x Leopold and the image in the glass is stunning. This has me looking at the Mark 5 so that it's a variable scope. I'm wondering what the image is like. The 36x is like looking with your eyes, no discoloration or changes of appearance.
@joeldubose5762 Жыл бұрын
@@Ultimatereloader ☝️
@tannerhoward3817 2 жыл бұрын
Man I really appreciate the data driven approach. Such a relief to see someone finally doing this.
@Chompers1988 2 жыл бұрын
Really digging the data-driven analysis of the optics and the scientific merit to the testing instead of what some people do by just putting up strings and measuring with a tape measure. Keep up the top-notch work Gavin
@jimollison5004 2 жыл бұрын
Really like the video both Parts 1&2! Just made it out to the range yesterday with my Mark 5HD 5-25 mounted onto a CMMG Endeavor Mark 4 in 6ARC. The rifle grouped very well using factory Hornady Black ammunition. Very happy w the results!!
@bulletterminalperformance 2 жыл бұрын
That was about one of the best reviews I've ever watched. Thank you for the taking the time to make these detailed videos.
@charlesmorris3129 2 жыл бұрын
I’m running my mark 5hd 5x25 on my tikka t3ctr in 308 and absolute love it. So far taken it out to 300m but planning on trip to Take it out 800 for the first time. Love your guys videos very informative. Great detail on all vids especially like the one on the area 419 zero press.
@ShutUpAndListenYouIdiot 2 жыл бұрын
I've put 1000+ rounds thru the 5-25 with TMR reticle, it's been flawless. It's helped me place top 3 in every local competition I've entered.
@narisnilubol86 2 жыл бұрын
Great review! I'm a big fan of your data quality and work that sets apart from other reviews.
@juwind78 2 жыл бұрын
Appreciate your work and the great review on the M5 scope. I have had mine nearing 2 years or thereabouts. Best bang for your buck for what you get in my opinion . I use the 3.6-18 with T-3 on an AMC mount all the way to 1000m and it does the job well.
@greasemonkeyviking384 2 жыл бұрын
Awesome video Gavin! Sure like that optic a lot, been running one on my 6.5 creed this summer, has the tremor3 reticle, starting to become my favorite
@ryanberg3705 2 жыл бұрын
Great scope! I've had one for quite a while and it's been my favorite for about 1-1/2 years -- quite long for me.
@jimclark6883 2 жыл бұрын
I have the 3.5-18x44 mounted on my LMT 308MWS rifle. This scope is high quality and has excellent optics.
@danm7232 2 жыл бұрын
I have been using the 7-35 for a little while. Lots of other shooter at the range ask to take a look through it. I enjoy seeing your technical breakdown of the scope confirming what I thought-that it’s a great scope.
@commonsense5709 Жыл бұрын
Hi there, have you had the opportunity to compare your Leupold to the Vortex 6-36x56 Razor 3?
@tonydevich7937 Жыл бұрын
Hi fellow shooters, I'm really glad you are out there because it helps to know things like this
@2steedaq 6 ай бұрын
Awesome to see someone doing testing at this level! As always, thanks!
@keithgross7604 9 ай бұрын
I’ve had 2 M5’s for a couple years, the 3.6-18 & the 5-25, both excellent scopes. Tough to beat Leupold, although I put a N.F. ATACR 7-35X56 on the 300 PRC, good to see when your your reaching out there, especially when seeing isn’t as easy as it was 40 years ago. Really great to get all your new input and hear fresh enthusiasm I Truly appreciate it. Thanks for keeping a guy inspired.
@RockinRack 2 ай бұрын
How does the nf compare to the mk5? I have a few mk5s and razors and my brother has a nf and I can't see a ton of difference in clarity out to 700y But everyone seems to say the mk5 doesn't hold a candle to the nf glass.
@candelariosanchez273 2 жыл бұрын
This will be my next purchase without a doubt , love my night Force 8-32x56 and I know this Leupold will be great on my new Sako 300 win mag in the Utah mountains, hanks for a great video input
@0zmose 2 жыл бұрын
I've been running the illuminated TMR 3.6-18 for over a year now. Hands down my favorite scope. The quality is well above the price range. You should check out the illumination too, very clean. That would be a good thing to test as well. I've seen some "quality" scopes that are fine until you light them up, then you get big halo in the tube. It would be great if you could do a comparison with the Mark 8. It would be the closest a peasant such as myself will ever get to looking through one.
@ronmartblog 2 жыл бұрын
This is great When showing how good the image distortion is in the future , it might be useful to show your best and worst results from other scopes so the audience can get calibrated on what good and bad look like - even if the product being reviewed is your new best or worst Love it 🙌🏻
@dogbone1358 2 жыл бұрын
I have one Leupold scope, a VX-31 LRP, and it’s the only one I lapped the rings to make sure it was bedded properly. It’s on a stock Ruger Precision in 6 Creedmoor that shoots five shot groups touching (almost one hole) at 100 yds.
@warrenjohnson8085 8 ай бұрын
Enjoying your channel from BC Canada. Just purchased a Christiansen Arms MPR 338 Lapua with a Mark 5. Have yet to fire rifle due to work responsibilities, very excited and looking forward to having some fun.
@tonydevich7937 Жыл бұрын
You guys are just awesome. Again thanks for all
@johnbrandon6361 2 жыл бұрын
I shoot a Mark 5 with Horus Tremor 3 reticle in 3.6x18. Absolutely love it!!!
@michaelbutler4961 10 ай бұрын
Have you done similar scope testing with NightForce NX8 or ATACR and Vortex's high magnification scopes? It would be nice to see testing comparing these brands with the Leupold.
@johngrey7089 6 ай бұрын
You guys are awesome and I think you sold me on the scope, but when you're measuring distance to your target.... try a tape measure. I bought a 100 yard tape for 20 bucks on Amazon
@mtbadger1346 Жыл бұрын
I own both the 3-18 and the 5-25 Mark 5s. Both are on .300 WMs. Both are fantastic optics and have been used extensively shooting out to 1K, and hunting. (The 5-25 on two different rifles) I shot my best 1K group with the 5-25 to date. (2.74 inches at 1K with a factory Christensen Mesa LR and 230 Bergers)
@wvlongshooter3912 2 жыл бұрын
Having mirage makes it tough trying to get the parallax dialed out. If ya can’t get the parallax dialed out correctly, then this alone can cause false testing. In other words it could look like an optic has error when it doesn’t and a lot of shooters don’t understand or know when the parallax turret or knob is adjusted correctly. I’ve seen professional marksman not fully understand this concept. I’m sure UR had this down. Great content!! Thanks!!
@talkingrock7011 2 жыл бұрын
Good information Gavin , that’s a great piece of glass but it should be
@TMS5100 2 жыл бұрын
color calibration card downrange, love it.
@SteveWilliams-gw4rb 8 ай бұрын
bought the scope, stunning
@pmcelreath1 2 жыл бұрын
Love mine with the Tremor 3!
@PhuVet Жыл бұрын
Panavision has a rig that will align to .0001" it's used for video compositing and was patented in the 1980s. They used it to add 6 layers of video over each other to create a practical effects shot for one of the star wars movies. I think Mr knoll actually owns the patent. He has over 6,000 patents for optics rigs and camera mounts. He will actually help you with a patent if you need help. He helped a friend who designed a multiplex camera rig that held a rifle scope with a digital sensor on one side and a 35mm camera on the other to test the clarity of scopes. I think his rig used cnc pillar vises to do everything and had a laser to track the overlap points. He ended up having to ditch the patent because there were hundreds of designs that were close to the design and he ended up having a single patent that was close that wouldn't release to allow his patent. Cost him 150k and he almost lost his house over it. Lost his wife, she refused to deal with his obsession with optics. There are millions of optics patents, good luck with the patent and remember, China doesn't care about them and will knock it off and sell to eastern European companies killing your patent.
@claytonhowell5499 2 жыл бұрын
I run a MK5 5x25 with CCH reticle. I have shot out to 830 yards maybe 1000 rounds so far. No problems very clear glass. Hoping to get a 7x35 to see if I like it as well.
@texas22jack89 2 жыл бұрын
Very helpful thank you!
@RockinRack 2 ай бұрын
For anyone curious I have the mk5 7-35 and 5-25, and razor gen 2. Looking side by side at an electric box about 100y away I can see more detail and fine print with the mk5 at 25x vs razor at 27x... now with the mk5 7-35 I can see more detail than both others at only 20x. Might be a fov thing? Not sure but I'm amazed at the 7-35 and the usability of the pr2 reticle even down to 12x its very usable.
@mikecash6672 2 жыл бұрын
I run the 7x35 with the new PR2 reticle and love it. Stretch to a mile with ease. Shoot 2" groups with it at 1,000 and a 245 berger.
@thomasscialla1115 Жыл бұрын
Two inch groups at 1000 yards? I am going to call on that one LOL. 10 inch groups at 1000 yards is doing something. Two inch groups at 1000 yards would win you every 1000 yard shoot ever held.
@strengthcourage9149 2 жыл бұрын
Own 4 Mark 5HDs. 3.6x18-44 on lightweight hunting rigs, 5x25-56 for hunting or comp, & 7x35-56 for comp. Using different reticles looking like I may settle on the CCH. Love my NF ATACR, but plan to dump it due to weight, or just use for comp.
@JohnThomas-gj2zg 2 жыл бұрын
Very nice information thanks....
@adamm74 2 жыл бұрын
Would love to see y’all test a Nightforce NX8! I’m really curious if it’s really worth the money
@Sharberboy 2 жыл бұрын
Gavin, I need you to test the tract toric 4.5-30x56 elr. My favorite scope to date.
@maxtheroofer8004 2 жыл бұрын
well above my budget! I dont even make that much money in a month, but it does seem like a darn good optic! good video review
@brandon152lee 2 жыл бұрын
Excellent video, I’d LOVE to see a test of the most accurate rangefinder binoculars available on the market today as I’ve yet to buy one
@tonydevich7937 Жыл бұрын
I just put one on my elite 110 I like it so far
@moremoe5825 2 жыл бұрын
I absolutely loved the content and found the ring bedding to be very interesting 👍
@Ultimatereloader 2 жыл бұрын
Glad you enjoyed it! We're having a lot of fun with this testing and these builds :)
@moremoe5825 2 жыл бұрын
To be honest you’ve inspired me over the last year or two to start doing my own gunsmithing and plan on taking Gordy Gritters class as soon as possible! Thank you and keep up the great content… your such a good presenter and host , you really outta start producing your own dvd series on gunsmithing Paul M
@blazemanchannel477 11 ай бұрын
Picked this up for a rifle and am looking forward to putting some metal down range. Once I get it zeroed I'm hoping it stays solid. I have a new mount I'm using with it is well so we'll see what happens. I may have an update after this coming weekend.
@Joe-lk6oc 2 жыл бұрын
Leupold!!!!!!!!!!!!!! USA!!!!!!!!!!!!!!!!!!
@commonsense5709 Жыл бұрын
Oh yeah!!!
@trauma147 2 жыл бұрын
It's, "Punching above your weight range" Great video!
@commonsense5709 Жыл бұрын
Such a great review. I'd like to see a comparison with the 6-36x56 Vortex Razor 3.
@sjowners Жыл бұрын
Razor 3 is much clearer.
@Lowns_300 Жыл бұрын
@@sjowners😂😂😂😂
@erikmckaygunsmithing6470 2 жыл бұрын
Ive installed 2 mk5 scopes on buddies longrange guns and we've had very good luck with them. Great glass track good great turrets no complaints 👌 Wish id had this on my m24 back in the day. I use Athlon midas tac ffp mil rad scopes on my m24 inspired builds in 6.5cm, 3006ackly ,my 300 ultra mag m24 sports an Ares ETR ffp mil rad and my m24 338 edge sports a cronus btr.
@jeffstevens156 2 жыл бұрын
IM EXCITED! SERIOUSLY! IM NOT MESSING WITH YOU. YOU GUYS ARE TALKING SOME OF THE THINGS THAT HAVE HAD ME SCRATCHING MY HEAD IN THE PAST. I KNOW FROM SHOOTING SILHOUETTES THAT WITH OPEN SIGHTS, LIGHT GATHERING IS SUPER IMPORTANT. MORE THAN YOU CAN IMAGINE. WHERE THE SUN IS HITTING THAT FRONT SIGHT, ASSUMING YOUR REAR SIGHT IS HOODED CAN MOVE YOU IN REPEATABLE DIRECTIONS. HAPPENING ONTO YOU DOING A CRITICAL ASSESSMENT ON SOMETHING AS SMALL AS A 0.90 INCH GROUP MAKES MY “SPIDEY SENSES” TINGLE. THANK YOU!
@jeffstevens156 2 жыл бұрын
Judging from the comments, I’m not the only one that’s interested! Great job Guys!
@Armedlegally 2 жыл бұрын
Id certainly love to see how the vortex hd gen 2 (4.5-27x56) stacks up. That vortex to me is really top of the line i've ever shot I own 2 of them along with first gen. I can't seem to break away from to be honest.
@commonsense5709 Жыл бұрын
I'd like to see a head to head vs the Razor 6-36x56 Razor gen 3.
@aadamffarabaugh9034 2 жыл бұрын
The Bryson DeChambeau of the shooting world. Numbers matter. Always enjoy the content.
@donpope5524 2 жыл бұрын
Love your work! That said, I have always tried to keep my reticle as close as possible to the optical center of the scope so that you are using the center of the lenses. As you approach the edge of the lens you loose the image quality built into that lens. That is why I prefer the Leupold impact type reticle vs dialing windage & elevation. The mechanical center & the optical center are different. (Because of the offset caused by space occupied by the adjustment hardware) The mechanical center can be found by dividing the number of correction clicks in half. The optical center can be found by holding the eye piece against a well lighted mirror, looking through the objective end, and aligning the two images of the reticle you see with the windage & elevation dials. If memory serves, this is best done at the lowest magnification. I wonder how this would affect your data?
@commonsense5709 Жыл бұрын
Use Burris Signature XTR rings for sure. Perfect optical centered including horizontally.
@2342Medic 9 ай бұрын
Would love to hear an update on this scope.
@Saper29345 Жыл бұрын
Hope to see you guys do the NF ATACR 7-35×56
@wildcat_reloading 2 жыл бұрын
Now that's good glass
@andymorel4645 2 жыл бұрын
Hi Gavin, are you able to do a review on one of the nightforce SHV? I heard they are very good for an all around scope, but I would like to know what you think. Thanks
@naomihalliday-cox6614 Жыл бұрын
Can you describe the method used for measuring tracking error and the equipment I would need to calculate it? Thanks for the great videos.
@charlesmckinley29 2 жыл бұрын
Gavin developing a proprietary technology for testing optics???? Who da thunk it? 🤣😂🤣. I look forward to your reveal when you have all the intellectual property right paperwork done. I appreciate the effort you put into your test.
@tomspeed2000 2 жыл бұрын
This scope is really grate Just I wish if the windage was designed just like Turret sizes, without covering caps.. Also If in the future they going to upgrade it with more power and larger main tube ( 40mm or even 45mm ) than will be wonderful
@dahveed284 2 жыл бұрын
Nice. That is about a $2,400 scope so it should be pretty good. Do you measure distance from the end of the barrel or from the end of the scope? What is the benefit of epoxy bedding the scope?
@jeffprewitt7207 Жыл бұрын
I would like to know if a 5-25 Mk 5 offers same quality as the 7-35. Only drawback for me is the 35mm tube which makes it less flexible to swap scopes between my 30 and 34 mm tube scopes. Would also be interested in tests of the VX5 & 6 series Leupold scopes.
@davideustache4119 2 жыл бұрын
Quote from John Redfield: A gun is only as good as its sights 😎👍. I recently purchased the Leupold VX 5 HD 7×35×56 (Swapped out from Vortex Razor HD gen II 4.5×27×56)
@camonly849 Жыл бұрын
What do you like and dislike about each scope?
@hr2513 Жыл бұрын
Listening…
@calebmartinez3805 2 жыл бұрын
Just wandering if make any difference to use a machines level to level the scope? I ask because short action custom included a starrett level in the jig they use ( final level) Thanks! For any info
@SCgirlcancook 2 жыл бұрын
This is why this kind of testing might be done accurately and may be better Indoors.
@bzbcustoms4520 2 жыл бұрын
I went with VX3I LRP 4X16X50 LOVE IT I prefer the turret setup mainly the price🤣
@Clemonsds 2 жыл бұрын
Purchased my MK5 5-25x56 W/TMR a month ago. I have it mounted and just waiting for time off to get it zeroed in, I can't wait to work it out to 1,250 yards.
@spysweeper 2 жыл бұрын
I’m sure if it was leveled out perfectly, it would be less to nil but good for real world situations!!!
@10dannyp89 2 жыл бұрын
I love your approach, but when using a scope in mil’s why not go to 100m and then use a cm graph paper? Mil’s are not metric, but they are base 10 the same as metric. Easy to mount a ruler thats in cm at 100m as well.
@timothygarrity5181 Жыл бұрын
I am new to long range and have the mark 5 5×25×56 Pr2 mil reticle.What is the first thing I do when I get behind the rifle to sight in.This may sound silly but I am new.What is the first thing I do with the dials before I sight in this scope.It has a zero lock system.
@SuperGolfguy 2 жыл бұрын
Waiting for pr2 reticle to be available in the 3.6-18…yea, it may take a minute
@jbradley500 2 жыл бұрын
I'm just waiting for the day you reveal the underground 100 yard range to help with your testing lol
@cademarti1365 2 жыл бұрын
@Travis Fox bury some conex boxes end to end haha
@jbradley500 2 жыл бұрын
@Travis Fox I can't even afford ammo!
@JayNoQuarterReagan 8 күн бұрын
Why not just use a measuring tape. Those 300 ft ones. Could use that for precise distance as well?
@randylong8156 Жыл бұрын
All that's good, but I would like to see a box test on the range
@dennissawyer8496 Жыл бұрын
What are people using for a anti cant level with these? The 35mm tube has way fewer options.
@robertbicksler4901 Жыл бұрын
I’m going to buy a save 110 precision 300 win mag rifle. I want a leupold 5HD scope but confused on the reticle selection. I’m thinking illuminating option also. What would be the best all around reticle for long and extreme long range. Let me know your opinion . Thanks
@tommydube6874 2 жыл бұрын
I have a tikka super varmint cerakote on order in a 300 win mag. I was looking at this scope in a 5-25x56 a lot more than I wanted to spend around 3400$ Canadian. Originally was going to get a vortex viper pst gen 2 witch is around 1300$ Canadian. Is it really worth the extra 2100$?
@ufhkbikes 7 ай бұрын
Would vortex razor gen3 be in the same class as this scope ?
@jericochavez209 Жыл бұрын
intense
@senusret1845 6 ай бұрын
How to turn or install the illumination for this scope?
@GetMeThere1 2 жыл бұрын
If I'm understanding your magnification analysis correctly, it seems what you're measuring is relative -- between the power settings. I'd also be interested in "absolute" magnification accuracy. I wonder whether you could do that by absolute measurement of your images vs actual size of the image. Also, a MAJOR parameter for me is resolution/clarity. Do you think you could come up with a test for that? One practical way I've always thought about is comparing distance/magnification/ability to read some standard text. If, on exactly the same magnifications, you could read standardized text with scope A at 65 yards, but scope B could read it at 71 yards, then scope B has superior resolution. Would you care to discuss the issue of resolution?
@mryaj0095 2 жыл бұрын
Vs Votex rzr gen 2 ? Im curious if its time for me to get a new scope.... Yes I have a Rzr gen2 4.5x already. The weight is killing me!!!!
@gerardladalardo1378 2 жыл бұрын
Where do I find Part1? Cant seem to find it
@timothygarrity5181 Жыл бұрын
How do I sight in with this scope? I bought this scope a while back k and it sits on a tikka t3x tac a1. I haven't shot yet because I don't know what to do with it.There aren't any videos on line sighting in with this scope.what is the first step I take before sighting in? Very first step,and then get me on paper. I would greatly appreciate it if you guys could help me .aI have tons of money into this gun to not shoot it.All I need is a short explanation of what to do starting with first step,I just want to get on paper,and after that work on my marksmanship. Thank you again!!
@davidhochstetler4068 2 жыл бұрын
No stop it. They’re finally becoming available again
@disgruntledbear2764 2 жыл бұрын
OK, so is it 100 yards exactly from the objective lens?
@tonydevich7937 Жыл бұрын
Do you what you do, we all love it...if people aren't open to different ideas oh well
@charlesmckinley29 2 жыл бұрын
What!?! Spend as much on the scope as the rifle???? This $50 eBay scope is all I need on my custom build! It has a red dot and a LASER! (You know you’ve seen it.)
@garyhocker7876 2 жыл бұрын
Off Topic: I am having problems with Hornady brass for my 6.5 PRC. After 2-3 reloads, the primer pocket is getting loose-too loose to use. Is this a common problem with Hornady in 6.5 PRC? Is Lapua better (longer lasting)? Rifle Bergara B-14 Wilderness HMR Powder: N165 50gr Bullet: 140 gr Hornady HPBT No pressure signs on brass, no stiff bolt release. Thanks
@thomasscialla1115 Жыл бұрын
I have always found that Lapua brass is top notch. I wish that I had about 5000 pieces of it for every cartridge I fuss with LOL.
@Forumrida38621 2 жыл бұрын
Hey Gavin so I currently have a NF NX8 4-32 F1, do you think this scope is a higher quality or comparable?
@carltheriot8107 Жыл бұрын
Hey, I’m thinking of getting the NX8 4-32, is it really good to 1,000 yards???
@rc51price 2 жыл бұрын
7x35 with pmr2 rectical. Weypoint 6.5cm
@meidamx 11 ай бұрын
Get some.
@allenclayton7 2 жыл бұрын
Test a NX8
@66branch 2 жыл бұрын
I second this. I've been running one and it's been super accurate.
@commonsense5709 Жыл бұрын
I was a Nightforce fan and still own a couple and switched to March and it's a night and day difference.
@johnwallroff5918 2 жыл бұрын
Leupold Mark 5 3.6-18x PR1 Mil - Remington 40X Tactical Custom Shop 308 Win.
@tonydevich7937 Жыл бұрын
I'm using it on my 110 300prc
@johncrenshaw1383 2 жыл бұрын
Mark5 HD is a great optic bug I definitely prefer my Kahles K525i SanTan Tactical 6mmARC w/ Proof Research Carbon Fiber barrel topped w/ Leupold Mark5 HD 3.6-18X44
@camonly849 Жыл бұрын
What do you like about the khales more?
@johncrenshaw1383 Жыл бұрын
@@camonly849 the glass is far superior! German glass especially in low light can’t be touched by Asian glass.
@camonly849 Жыл бұрын
@@johncrenshaw1383 awesome! Good to know! I was looking at steiner, khales and vortex.
@tylerfrogley1227 2 жыл бұрын
Bedding the scopes doesn’t sound like a bad idea to me if lapping scope rings is a thing
@erikmckaygunsmithing6470 2 жыл бұрын
Its a thing for sure, but I'll say the better quality rings you use the less you got to do this. Quality does not always equate to most expensive either.
@joeygreen7854 Жыл бұрын
The use of Leupold rings explains the reason for bedding… nothing more needs to be explained. 😊
@TMS5100 2 жыл бұрын
@10:19 midas tac is also 40% the price of this leupold...
@commonsense5709 Жыл бұрын
It's not in the same class, the Midas Tac though a more than decent scope at a much cheaper price is Chinese and the Leupold is made in the USA sourced with foreign and domestic parts while the Midas Tac is 100% made in China.
@commonsense5709 Жыл бұрын
I own an Athlon Midas Tac among other Chinese made scopes from big name American scope companies and don't expect anything made in China to be as reliable as American made as my Leupolds or anything made in Japan.
@dooryun000 2 жыл бұрын
Where can I purchase your 100 yards target?
Tactical Hyve
Рет қаралды 807 М.