Testing 15 Lego Propellers

Testing 15 Lego Propellers - Lego Technic

Рет қаралды 974,177

Күн бұрын

Join me as I explore the exciting world of Lego propellers, testing classic and custom designs for performance and durability. Witness toy engineering at its finest as I push the boundaries and unveil the secrets behind these innovative creations in action.
00:00 Let's make some noise!
00:20 Propeller 2 Blade 9 Diameter
01:20 Propeller 2 Blade 9 Diameter x2
01:59 Propeller 7 Blade 6 Diameter
02:14 Propeller 3 Blade 3 Diameter
02:32 Propeller 3 Blade 5 Diameter
02:54 Propeller 3 Blade 9 Diameter
03:29 Propeller 3 Blade 9 Diameter x2
04:02 Propeller 3 Blade 9 Diameter x4
04:39 Model "Cross"
05:01 Propeller 3 Blade 13 Diameter
05:36 Model "Wheel"
06:23 Model "WW"
06:44 Model "Saw"
07:12 Propeller 1 Blade 14L with Two Pin Holes x3
07:52 Propeller 1 Blade 14L with Two Pin Holes x6
You can join my channel to show your great support:
/ @drengine

Пікірлер: 148

@DrEngine 2 ай бұрын

I have been curious about how the size and shape of a propeller affect its efficiency for a long time. I tested some propellers that I found in my drawer. I hope you find my experiment interesting!

@SWellWellWell 2 ай бұрын

It was educational and fun! Thank you!👍👍👍

@Sonnell 2 ай бұрын

It was fun, but it felt like it lacked the basic understanding of aerodynamics. I suggest you try the same tests next using smoke, then you'll understand a lot of misconceptions about how these stuff works. Like why the ball did not move close to the propeller but was sped up at a distance, or why non wing like "propellers" did not work.

@hydroworldoutlook5447 2 ай бұрын

@DrEngine It was very interesting! Thank you! 4:40 As a building tip, though, when building custom-made propellers using LEGO Technic panels like this, try not to build perpendicular to the axis of rotation like you did in this video, as the centrifugal force acts outwards on the propeller blades. What I mean by that is, try using pairs of either the 3L Technic universal joints (for controllable and variable-pitch propellers) or the 3L Technic angled axle connectors to mount the blades parallel to the axle or axis of rotation, and reinforce the blade connections on both the bottom and top halves of the propeller hub. 3L Perpendicular Pin and Axle connectors can be used to mount the blades onto the hub. I've found that this design is much more resistant to centrifugal force and can hence spin at much higher speeds (even ludicrous BuWizz or buggy motor speeds) without breaking apart. I will provide links to the parts I am talking about below. www.bricklink.com/v2/catalog/catalogitem.page?P=42003#T=S&O={%22iconly%22:0} www.bricklink.com/v2/catalog/catalogitem.page?P=32016#T=S&O={%22iconly%22:0} www.bricklink.com/v2/catalog/catalogitem.page?P=62520c01#T=S&O={%22iconly%22:0} Hopefully this helps! :)

@hydroworldoutlook5447 2 ай бұрын

@@Sonnell The ball did not move closer to the propeller because thrust from the propeller was exerting a forward force on the ball until the force of gravity interrupted the ball's motion (on steeper inclines). And non-wing propellers can work as long as each blade is set an angle, they are just less efficient than propellers with more aerodynamic blade types. Moreover, the propeller failure at timestamp 4:40 resulted from a structural integrity issue directly related to the propeller's design, not its aerodynamic performance. Centrifugal force acted outwards on the blades and overcame the frictional forces that held those blades to the propeller hub.

@AaronTureRonAbrahamsson157 2 ай бұрын

Very funny Videos! 😊

@Slownick 2 ай бұрын

You have been running some props in the wrong direction. Best test them in both directions

@stonehengeman 2 ай бұрын

Also different amounts of power in each run.

@jessicaclark4350 Ай бұрын

go-go gagit pixel reducer 0:01

@josephbruceismay6832 15 күн бұрын

OH NO THE PIXELS! WHERE THEY'RE GOING?! [screams in 8p]

@shizumeru_ 2 ай бұрын

The wind detector falling over was a task failed successfully

@elios7623 2 ай бұрын

4:21 THAT COUNTS???? hahahha aah omg you got me good

@hybrid.roodragon1226 2 ай бұрын

Lmfao

@panopticonoctopus560 2 ай бұрын

Your design choice to put the 3 flags along the ramp really drew me in: Flag 1, Flag 2, Flag 3, The Box!!! Loved it ~ thank you 😊

@DrEngine 2 ай бұрын

Glad you like them!

@baitsforyou Ай бұрын

@shroomzzz 2 ай бұрын

+1 for the Hot Wheels track! Such a bummer to spend the time build up something like the 'wheel' only to find it completely ineffective. All AFOLs know this pain. Thank you!

@Simple_But_Expensive 2 ай бұрын

I see several ways this test can be improved. 1) The tilted track means that at the higher levels, the propeller is no longer blowing along the axis of travel. A better setup would be if the track was attached directly to the motor frame, and the entire assembly was tilted. 2) Not all of the tests were at the same distance from the axis of rotation. A better setup would be three tracks, one at the bottom edge of the propeller, one at the center, and one at the top. The bottom one would trap air against the track, while the top would not, allowing comparison. 3) There are no really useful metrics. For an apples to apples comparison, make the track(s) longer, tilt them at 30 or 45 degrees, and attach a scale to the tracks. The propeller pushes the balls up the track, but it is long enough that the ball(s) 7:43 eventually stalls before reaching the end of the track. Measure the distance to get a comparable metric.

@DrEngine 2 ай бұрын

Amazing tips, thank you!

@whatusernameis5295 2 ай бұрын

also have the same amount of power behind each of the fans instead of changing it. that really messes it up when available power is changing (some of the earlier fans would have benefitted from more power but you didn't give them it then you gave later ones more power) unless you did keep the same number moters

@thenotoriouscow2063 2 ай бұрын

You have to tilt the rotor as much as the slope to keep the force and it's vector constant

@user-zy2nu7gk6i 2 ай бұрын

greate video bro!👍👍

@DrEngine 2 ай бұрын

Thanks! 👍

@Gearz-365 2 ай бұрын

Another amazing feat of LEGO engineering!

@jcmagna1243 2 ай бұрын

the effort put into these videos is amazing

@spleenjacobson203 2 ай бұрын

It’d be cool to compare ducted designs! Or maybe even multi-stage setups with progressive RPM on the addition fan stages? Or additional vanes after the fan to create laminar flow, which would increase the distance the air travels?

@filgiupo4853 2 ай бұрын

Absolutely loved this video since I always wanted to know which propeller worked best

@DrEngine 2 ай бұрын

Great to hear!

@MrBenski81 23 күн бұрын

Many of the props you have running in reverse. Take note of the aerofoil. The rounded edge leads the way. NOT the sharp edge. Had you used a snail scroll blower, you'd have sent that ping pong ball vertical.

@user-no3vf9ry8u 2 ай бұрын

Thank you so much for the informative video! The video quality is incredibly high! I am impressed!!!

@DrEngine 2 ай бұрын

Glad you enjoyed it!

@orangebg3761 Ай бұрын

Hey the flaps on the fan you maid is reversed that's why it didn't work@@DrEngine

@falkez1514 Ай бұрын

bro had such a good first try that it took a redesign and 9 other tries to beat it lmao

@user-fk2oi2yn2f 2 ай бұрын

Great video! However, like all your previous ones👍🔥

@DrEngine 2 ай бұрын

Glad you like them!

@catter7652 2 ай бұрын

7:55 that "flop" made my day! 😂 so unexpected, yet so incredibly funny!!😂😂

@anadiacostadeoliveira4 Ай бұрын

Everybody do the flop

@SmartLego-it1wj 5 күн бұрын

You're always so creative with your ideas. I'm always excited to see what you come up with next.

@rubythereptile 2 ай бұрын

love your channel

@bey321 2 ай бұрын

Amazing ❤❤

@DrEngine 2 ай бұрын

Thank you! Cheers!

@SirNobleIZH 28 күн бұрын

1:01 One must imagine Sisyphus happy

@theeggheochannel9758 2 ай бұрын

4:37 cool

@universalvastplays Ай бұрын

Lego x HotWheels x White Ball, never expected such a collab!

@rohanatorgaming0903 2 ай бұрын

I'm gonna use the Propeller 3 blade 13 diameter as my fan

@ctrlaltdel02 2 ай бұрын

If RPM's drops from maximum and wind speed stays almost same going to different propeller, than it tels you, you have not enought power. First few tests is not valid due to motor not being powerfull enought to drive all attached propellers at 11k rpm's. At that point you are not testing propellers, but motor.

@SWellWellWell 2 ай бұрын

or shows the influence of the propeller on the engine ;)

@oldhorn420 2 ай бұрын

He needs to use a brushless motor or put more motors

@SergeiKoshman86 2 ай бұрын

For some runs with small propellers, especially where they do not hit ~70% of max RPM, it would be good to test to remove the last reductor stage, for more torque & less friction

@gabrielpetre3569 2 ай бұрын

Maybe try to make a cilinder around some of them to funnel the wind?

@DrEngine 2 ай бұрын

Nice suggestion!

@Pinkiewithmint101 Ай бұрын

That one Propeller just ripped apart

@Domus_Maximus 2 ай бұрын

It's a bit of a flawed test, not only because the ball will just let the air flow around it and/or leave the air current as it ascends. Perhaps try propeller designs on a vehicle on rails, then you can measure both the weight and speed the designs can move?

@pm6_06universe Ай бұрын

6:10 bro just want to move near the ball 💀

@sulaimanabdullah952 21 күн бұрын

I found this video very interesting. Thanks You might want to try one (or more) of your propellers with a single motor and different gear ratios. There will be a 'sweet spot' where 'matching' the propeller to the motor is best. Just a thought

@DrEngine 21 күн бұрын

Thanks for the tips!

@eno88 23 күн бұрын

6:42 turning OSHA into OSHI-

@baitsforyou Ай бұрын

my fyp be like! he woill watch anything

@sop1918 2 ай бұрын

There’s official Leto rotor pieces, many from Lego city helicopters, would be cool to see them

@user-do4is1gi7m Ай бұрын

今学校で歯車使った学習してるからこのすごさがすごくわかる😊

@djhagrid300 2 ай бұрын

More blades doesn't equal more wind. It's actually negatively affecting the amount of moved air by decreasing the efficiency of the vortex. Same reason boats or wind turbines usually only have 3 blades on a propeller. It's a fascinating science actually. I recommend looking it up.

@RRRUFannyMLBBuchenik 2 ай бұрын

So, What makes more blades?

@Roboseal2 2 ай бұрын

I know this might be extremely hard to do but what if you tried Contra-rotating props? The Antonov an70 has them

@DeadBryan 2 ай бұрын

Great propeller invention

@noamharduf 2 ай бұрын

i am a big fan of your woke kip it up😁

@ajmc6322 2 ай бұрын

The wheel is pretty much just a large centrifugal fan which pulls air through the middle and flings it to the outside. You usually see them inside a cowling with one outlet for directing all that airflow to one area (usually inside someplace that needs cooling)

@DrEngine 2 ай бұрын

Thanks for the info!

@user-of2fr1kh1r Ай бұрын

The lego one is like a sounds like helicopter propeller broking

@IstasPumaNevada 2 ай бұрын

I enjoyed this video, but I would also like if you performed the tests again with more scientific rigor, using some of the comment suggestions like testing all the blades flipped around too, aligning the fan direction with the incline, and testing different gearing for the fans to see which gearing works best for each one.

@arvidklangagerup7c319 2 ай бұрын

The first level five edged me so bad bro

@DecayedPage 2 ай бұрын

Wouldnt the Propeller 3 Blade 13 Diameter work better flipped around? Im just judging by the shape of the blades. Wouldnt it also be able to take in more air because of the curve?

@danielhpcx 2 ай бұрын

Amazing video ❤ Part 2 with counter rotating blades

@DrEngine 2 ай бұрын

Noted!

@user-vb9zb9ui8g 2 ай бұрын

Cool

@ilovebricksz 2 ай бұрын

Nice!

@RCmies 2 ай бұрын

now make a flying plane built out of lego using this knowledge... It's probably impossible but with enough wing span and really light build, maybe the body just made out of cross axle rods and some fabric or vinyl for wings, and using a small non-lego motor with small battery it could be possible. Or maybe a rubber band plane? Would be cool Lego achievement nonetheless.

@JjMn1000 2 ай бұрын

I noticed(as some others have also stated) that some of the propellers seemed to have been spun backwards

@CatDaddyTuning Ай бұрын

There is a maximum power for the first half of the tests. A more effective prop takes more power so you end up with nothing but the 2 blade getting past 5 until the ducted fans.

@AaronTureRonAbrahamsson157 2 ай бұрын

Wow! You’re doing great work and I hope you are able to best! 😊

@DrEngine 2 ай бұрын

Thank you so much!

@justanobody6344 2 ай бұрын

Now build a plane that can fly

@woaminibricks 2 ай бұрын

The truth is that having many blades does not mean the wind will be strong

@countchompula1896 2 ай бұрын

2 of those are boat propellers, not aircraft.

@GeneralML 2 ай бұрын

Wouldn't it make sense to tilt the propellor in line to the desired direction of travel of the ball? You might have a propellor capable of lifting the ball vertically, but if you put the rail perpendicular, the ball won't move...

@Morjensful 2 ай бұрын

The more complicated propellers cause more turbulence than airflow

@evhentumanov4673 2 ай бұрын

very cool

@yeetboil9172 2 ай бұрын

I like the idea but you really should’ve made a stronger structure for the big heavy propellers and held them down to use them most effectively

@MikaelLevoniemi 2 ай бұрын

I think a small propeller might've done it too if it had a cowl around it.

@SWellWellWell 2 ай бұрын

Is the Model "WW" model a "Water Wheel" ?

@infinitelucidmaze 2 ай бұрын

You should have angled the fans with the ramp

@victoriannordmann4333 2 ай бұрын

Most ships used three blades, because the drag lower the rpm and use more fuel

@willslifewithoutschool 2 ай бұрын

What camera are you using?

@Casphea 2 ай бұрын

adding more blades increases the drag

@aFrInaTiOn 2 ай бұрын

Nahw, you forgot to turn the white rotor blades by 90° - it will push much more are (and also creating much more resistance :D) Besides that little miss it isnice content, thanks ♥

@DrEngine 2 ай бұрын

Thanks for the tip!

@kristianstaalby8499 2 ай бұрын

Planetary gearbox/gearset when?

@florianwalter704 Ай бұрын

8:19 Why don't the levels fit with the wind speeds?

@Ftonus337 22 сағат бұрын

1:28 Rolling Shatter

@matheusandrade1260 2 ай бұрын

Why didn't you use counter-rotating propellers?

@kevtheoggamer6672 2 ай бұрын

For some reason the white ones seem to work best

@The_Ambababush. Ай бұрын

go-go gadget pixel reducer

@nerokashitaro1181 2 ай бұрын

Have you tried combining solar panel with Lego?😎👍

@LucasOliveira-dm8mb 2 ай бұрын

Algumas helices foram montadas ao contrario. Helice tem lado e isso influencia drasticamente no resultado. O lado da pá que é convexo deve ficar virado pra onde entra o ar na hélice, o lado concavo deve ficar virado pra onde o ar sai.

@OrLann-Tesseract- 25 күн бұрын

Model wheel = Model washing machine

@muhammadashrafangkasa2158 15 күн бұрын

6:12 i think your spinning the "wheel" the wrong way

@0_3113 2 ай бұрын

4:20 - Screw it

@godofmonochrome554 Ай бұрын

nice

@ryanjulius9037 25 күн бұрын

How does that work?

@minhkhangnguyen932 2 ай бұрын

2:14 that use for water

@minhkhangnguyen932 2 ай бұрын

7:56 bro make an whole tornado

@SWellWellWell 2 ай бұрын

Increasing the number of blades does not always lead to better results... 🤔

@Yarek653 2 ай бұрын

can you do a drone next??

@patrickbarna4546 2 ай бұрын

looks like size really does matter

@foxsquirrel3038 2 ай бұрын

And now, we know. 😂

@akhira_tan_aviations 2 ай бұрын

He will be hired by pratt & withney and lego

@beeswarm1bilion Ай бұрын

try to use a toroidal propeller it is way more efficient

@joaquindominguez3970 2 ай бұрын

Nuevo suscriptor

@zingxiu6123 2 ай бұрын

I just saw this and wanted to comment

@kiwishamoo6494 2 ай бұрын

No measurement of thrust force as well as velocity

@2222diy_craft_shorts 2 ай бұрын

Steell blade more effective

@user-ql5lo2cu5o 2 ай бұрын

omg😆😁😄

@userjf9yiyr29h Ай бұрын

1 : 12.6

@tubestoneup2 2 ай бұрын

Use a regular fan

@joaogabrielgamer1461 Ай бұрын

4:22 cheating

@the-je6zn 2 ай бұрын

now test them on water

@DrEngine 2 ай бұрын

Nice suggestion! Thank you ☺️

@the-je6zn 2 ай бұрын

@@DrEngine your welcome

@gibrannajwanchanel1410 Ай бұрын

😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁

@RizhaFamily Ай бұрын

Hello respected content creator, I am very interested in the content you have created, and if you are willing, I would like to request permission to re-upload it on our platform. We are ready to share the revenue with you. Thank you.

@The_Ambababush. Ай бұрын

scammer.