Testing Alliant Steel powder reloads. 12 gauge 3 inch and 2 3/4.

No video

Testing Alliant Steel powder reloads. 12 gauge 3 inch and 2 3/4.

Рет қаралды 1,474

Duckslayer’s Reloading

Күн бұрын

Testing Alliant steel powder reloads in 12 gauge 3” and 2 3/4.

Пікірлер: 7

@saltcreekammo 11 ай бұрын

12 gauge 3" Cheddite hull/primer 35 grains Steel LBC50 wad 1-1/4oz steel shot Fold crimp. 1450-1480 FPS Same load with 50 grains Lil'Gun gives you 1520 FPS and 10,700 PSI. I've killed a pile of ducks with the first load. 2-3/4" Cheddite hull/primer. 34 grains Steel CSD118 wad 1-1/8oz steel shot Fold crimp 1450 FPS. "Holy Grail load" (search Dave in Arizona "HG" load)

@Duckslayer1096 11 ай бұрын

Thanks for the info. Still looking for the best load. Will have to order some of those wads and give them a try.

@saltcreekammo 11 ай бұрын

@@Duckslayer1096 these are some of the best steel load out there

@Duckslayer1096 11 ай бұрын

@@saltcreekammo The LBC 50 is one of the few I have not ordered yet. I just ordered some Ranger elite as the SOS Has many loads for it. Thanks again. I have only just started in reloading and appreciate any info I can get.

@thastinger345 10 ай бұрын

Are you only interested in using AS powder? I have some now but it was unobtainium for 3 years so I just developed a bunch of steel shot loads using longshot. LS does great with steel shot as well, lots of loads out there for it.

@Duckslayer1096 10 ай бұрын

I started with Longshot as it was the only thing I could find also. I do have some decent loads for 2 3/4 with Longshot. Now that I too was able to get some Alliant Steel I am working on loads with it also. So many options available now that I have obtained both powders.

@thastinger345 10 ай бұрын

@@Duckslayer1096 I also got titewad to work with 1oz if steel...but the window is small with that powder