Testing the AEA Compact Pistol!

Рет қаралды 9,272

Күн бұрын

(Please like and subscribe for more content like this!)Testing another great product for my AEA Defender from Cody at Pneumatic Fanatic! If you own either the original or 2.0 versions and would like a new barrel receiver of almost any size contact Cody at PneumaticFanatic@outlook.com or visit his channel • AEA Defender 2.0 3D pr...

Пікірлер: 42

@ScaredyCatTactical 11 ай бұрын

It’s so cute. Nice seeing air-powered launchers that are actually not cartoonishly large. Always appreciate your careful and straightforward reviews.

@airgunnerreviews7888 11 ай бұрын

Thank you I really appreciate the compliment!

@davids184 11 ай бұрын

Thanks for giving us Cody's info in that last video. He just made one for me. Cant wait to get it.

@tx.tactical3165 6 ай бұрын

Thats cool gotta get me one, great video.

@georgeloveless4176 11 ай бұрын

I wasnt aware that AEA released a compact version of this model. This is really cool! I'd like to see it perform a bit better, but what a great concept.

@royweatherford64 10 ай бұрын

Only problem I had with mine was the firing pins and the springs that push barrels . I replaced firing pins from ares and it helped. I’m ordering Cody’s short barrel end today and probably the longer version for my gen 1 long barrel. After talking to him i believe this resolved most of the issues with the misfires . I can say with my longer barrel version I had dropped a axis at 106 yards with my Benjamin bd Taurus and broke his spine to where I couldn’t get up and run off . I took him with one shot from defender with jsb behind the ear and it was over instantly. There much more than given credit for

@thepepperballprepperlessle6486 11 ай бұрын

Great testing. Scott you definitely do the best testing on You Tube. Thanks for the great video A while back there was a guy making different barrels for these in various calibers. I think if you talked to Cody and he can make one in .25 cal. And someone used a hollow point .25 cal pellet. It would get the best results both on penetration and expansion. Something to possibly ask him about

@airgunnerreviews7888 11 ай бұрын

Thank you! Cody has a video up shooting his Defender in .25 cal in and it screams at 607 fps! The down side of this is the high pressure is being reduced into a smaller barrel and the back pressure wears on the firing pins.

@thepepperballprepperlessle6486 11 ай бұрын

@@airgunnerreviews7888 thanks. I’m going to check his videos out. Cool

@LessLethalDad 11 ай бұрын

My one major issue with the defender is that you run the risk of getting bad burst disc's making them unreliable. Also we can't even carry them in upstate NY. You'll get an AM charge if you use it in public.

@airgunnerreviews7888 11 ай бұрын

I totally agree it can be unreliable! There is a less lethal version I will be testing very shortly shooting the Grimburg kinetic rounds!

@lesslethalfordummies 11 ай бұрын

Nice video! Did the poly mags tumble? It looks like they went in sideways?

@airgunnerreviews7888 11 ай бұрын

Yes! 20FT shooting distance for 2” barrels is a stretch and the barrels are not rifled but this will soon change!

@royweatherford64 10 ай бұрын

Are those cut down defender 2 barrels your using

@airgunnerreviews7888 10 ай бұрын

Yes! You can pick up a basic pipe cutting tool in the plumbing department in any hardware store and it cuts nice and clean!

@airgunsanonymouslesslethal1904 11 ай бұрын

I love this compact version. And i love the derringer like design of these. I just wish they were more reliable. I guess Macabespeed is confident w/ his but i'll still wait for something new to compete w/ this, only pocket pistol of power yet.

@royweatherford64 10 ай бұрын

What helped me was putting a small amount of silicone oil on the oring at the burst disk or I’ve replaced them with a slightly larger o ring. It’s helped with slow leaking issues on several of mine.

@AZAJSC79 11 ай бұрын

How did you cut the barrels down evenly?

@airgunnerreviews7888 11 ай бұрын

I used a Lenox copper tube cutter you can purchase at Lowes. Although it is for copper it cuts these barrels with ease and super even and clean! Place barrel in a vice, clamp tube cutter and rotate until end falls off. Done!

@AZAJSC79 11 ай бұрын

Thank you much!!😮

@NuisancePanda 10 ай бұрын

I want to get one of these for my girlfriend so bad, but every video I've seen they're plagued with misfires and failures..

@airgunsanonymouslesslethal1904 11 ай бұрын

13 pfe w the right shot placement is pretty meen! espesially considering that some ppl carry .177 pellet guns. 16 is just better.

@someguywithamustache7235 11 ай бұрын

ill stick to my aea hp ss max for self defense

@undeadaeon9992 11 ай бұрын

Mine shoots arrows at 45-70fpe.

@airgunsanonymouslesslethal1904 11 ай бұрын

@@undeadaeon9992 deadly!

@Seabass1206 11 ай бұрын

instead of a burst disk why don’t they just design it with a firing pin and a little gas cartridge with a valve that opens , the firing pin opens the valve

@airgunnerreviews7888 11 ай бұрын

That would be awesome if they could!

@blaqlabspodcast5816 9 ай бұрын

It's doable. Absolutely

@DevanLee-rt3wt 4 ай бұрын

Time for some competition. The burst disc's are the weak point. I agree that a valve being held shut by a spring would be better. Then just a hammer can push a pin into that opens that valve and bam

@edwardschlosser1 10 ай бұрын

Sorry. I need reliability and the ability to check the pressure at a glance. I got a Hatsan Jet 1. It is slightly larger but completely air tight, and my .25 shoots a 40 grain bullet at 600 FPS. It's a good car gun for an emergency. For my home none of my guns are less than 200 FPE, but for a compact emergency self-defense weapon the .25 at 30 FPE is better than nothing. A gun that fails to discharge is nothing. My AEA HP Max .357 is not really a pistol. It's a carbine and is too large to conceal in the car. If AEA were smart they knock-off a Jet 1 and shorten it by 3 inches. The Hatsan Jet 1 is seriously under-rated as far as power unless I just got freakishly powerful one. I have verified the 30 FPE over two different chronographs simply because I didn't believe the numbers I was getting.

@airgunnerreviews7888 10 ай бұрын

I Am thinking about getting the Hatsan Jet myself it looks nicely made!

@montizzlefoshizzle7131 11 ай бұрын

I'll take the TR50 11 JOULE 6 shot with devastators over the AEA Compact 2 shot any day..

@valkyrie4Ok 10 ай бұрын

Mmmm one is 60 joules one is 11……

@edwardschlosser1 10 ай бұрын

I'll take my 30+ FPE (40+ Joule) 6 shot (40 grains at 600 FPE) Hatsan Jet 1 pistol over your toy gun any day of the week. 11 Joule is just enough to get a squirrel pissed off at you.

@montizzlefoshizzle7131 9 ай бұрын

@edwardshlosser1 ok, stand Infront of a 11 joule HDR50 and take one of those devastators to the chest. Bet you'll fold😎

@valkyrie4Ok 9 ай бұрын

@@montizzlefoshizzle7131 dawg they’re are videos of that lol it just makes like a little 1inch deep hole in the skin and the bullet sticks to they’re shirt doesn’t do shit lol

@blaqlabspodcast5816 9 ай бұрын

@@montizzlefoshizzle7131you won't be assaulted by some normal dude. You'll be assaulted by someone cranked up on meth and fentanyl who won't give a damn about 11fpe..