No video
TFL 1.3m giant Princess RC boat setup and running
Рет қаралды 10,279
Күн бұрынThese come standard RTR with a 'promarine' (rebranded flier i believe) 300a esc, I don't particularly like them as I've had problems with those before.
I fitted a ZTW 200a esc, smaller CNC prop that actually can work with this setup. Due to the failures you will see in the video i added a Sanwa radio with waterproof receiver and Power HD 20kg servo.
Batteries are RC Boat Bitz 5200mah 6s 75C nano techs wired in parallel.
Available to sell if anyone is interested
@petergoodwin2465 2 жыл бұрын
Looks great on the water , nice work again mate. Just bought a big Skipper craft half cabin hull so this helps me decide what to use in it. Was even thinking twin 40 mm jets or 2 outboards . Big boat 955 mm × 300mm , more fun ha,ha,
@RCBoatBitz 2 жыл бұрын
I didnt do anything so cant take any credit. Twin jets or outboards, that would be an expensive build either way!
@petergoodwin2465 2 жыл бұрын
@@RCBoatBitz it would be expensive but could always just use a 56 single motor and say good enough. Better start saving for this thing and decide what to do with it. Thanks for the prop test mate ,
@bobyayeet848 2 жыл бұрын
Sweet lookin boat
@RCBoatBitz 2 жыл бұрын
Yes it is nice, thankyou
@RCplamodel Жыл бұрын
*Thank you for sharing a good video with a nice boat!~~~^_^*
@RCBoatBitz Жыл бұрын
Thankyou
@MaxPower-zp7wy 2 жыл бұрын
The ESC is only going to use what the motor needs I guess. As long as your motor draws less amperage than your ESC can handle, it's going to work more efficiently especially with batteries that can handle a high C rating. Your not gonna cane any electronics. But I am no electronics expert.
@flynn5869 2 жыл бұрын
It looks like it’s got quite a slow takeoff.
@RCBoatBitz 2 жыл бұрын
yes, its only programmed at 20% on the ESC
@choicecafe-mu2ot 11 ай бұрын
How are you taking your prop on and off so fast? Quick release nut or something?
@RCBoatBitz 11 ай бұрын
A piece of water tubing
@RCplamodel Жыл бұрын
Good 👍 😊😊
@johnconnor6725 10 ай бұрын
You need to build a dock of some sort to launch without the dropping. $0.02
@RCBoatBitz 10 ай бұрын
Haha yes
@43rocket 2 жыл бұрын
how you prevent water from getting up in boat?
@RCBoatBitz 2 жыл бұрын
All rc boats leak varying amounts, this one hardly leaks at all though
@43rocket 2 жыл бұрын
@@RCBoatBitz how do you water proof reciever?
@RCBoatBitz 2 жыл бұрын
Dont need to, its a waterproof reciever, i mounted it high in the boat anyhow
@Baby221-ko3jb 10 ай бұрын
Belinya di mana?
@RCBoatBitz 10 ай бұрын
We sell them
@rickbarg3980 2 жыл бұрын
Nice pond looks a little low
@RCBoatBitz 2 жыл бұрын
Only good thing about is its out of the way so i dont have to answer 20 questions from everybody who walks past haha
@rickbarg3980 2 жыл бұрын
@@RCBoatBitz I hear ya nice little spot though.
@Wanted1069 4 ай бұрын
Lol, it needs a 775 brushed can and a big ass 4 blade prop. Its a "Cruzin boat" Not a speed boat...
@RCBoatBitz 4 ай бұрын
Next time ill ask you first
@Wanted1069 4 ай бұрын
@RCBoatBitz I wasn't tryin to be rude.... Geesh..🤦♂️🤣
Fabiosa Best Lifehacks
Рет қаралды 21 МЛН
Mister Hobby TV
Рет қаралды 10 М.
Banggood video
Рет қаралды 7 М.
Pascal Robert - Rc Creations
Рет қаралды 16 М.