I've Tried 200+ Filaments. These 20 Are The Nicest.
Рет қаралды 43,293
Күн бұрынIn this video, I talk about the 20 most beautiful filaments on the market right now. Brought to you by PCBWay. Register at jle.vi/pcbway and get a $5 welcome bonus!
I don't know about you, but I still remember the days when "beautiful" filament meant a basic silk... or maybe, if you were lucky, a matte filament. But over the last few years, we've become spoiled for choice. Not only do we have sparkling colors, but we have dual silks, triple silks, silk gradients, matte gradients, fast transitions, slow transitions, textured filaments. We even have filaments with trippy iridescent effects.
In this video, we're going to be exploring the MOST beautiful filaments to take YOUR 3D Printing projects from looking "common" to exquisite.
So whether you're printing display pieces, toys, or even functional parts that you just want to be proud of... hold on to your wallets... because this video is going to be an expensive one to watch.
🤫 Get behind the scenes and exclusive content on my Patreon: / thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:24 Background
01:59 Fillamentum Wizard's Voodoo
02:51 PolyMaker "Starlight" Series
04:00 PolyMaker Galaxy Black
05:42 Bambu Lab PLA-CF
08:39 Sovol / eSUN Dual-Color Magenta Blue
10:27 SliceWorx Matte Gradient Series
11:13 ZIRO3D Matte Macaron Rainbow Gradient
12:02 ZIRO3D Galaxy Gradient
🔗 LINKS MENTIONED IN THE VIDEO: 🔗
👉 Fillamentum: jle.vi/fillamentum
👉 PolyMaker: jle.vi/polymaker
👉 Kexcelled: www.kexcelled3d.com/
👉 Bambu Lab: jle.vi/bambu (supports 3D Print General)
👉 Sovol: jle.vi/sovol
👉 eSUN Dual-Color Magenta Blue: geni.us/eSUN-MagentaBlue [Amazon]
👉 SliceWorx: www.sliceworx.com
👉 ZIRO3D Matte Macaron Rainbow Gradient: geni.us/ZIRO3D-Rainbow [Amazon]
👉 ZIRO3D Galaxy Gradient: geni.us/ZIRO3D-Galaxy [Amazon]
👉 My previous video where I talked about Carbon Fiber filaments: • Carbon Fiber 3D Printe...
🪨 Models Shown In This Video:
👉 www.printables.com/model/8152...
👉 www.printables.com/model/7055...
👉 www.printables.com/model/6904...
👉 www.printables.com/model/4793...
👉 www.printables.com/model/8534...
👉 www.printables.com/model/8895...
👉 www.printables.com/model/8776...
👉 www.printables.com/model/5166...
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: jle.vi/links
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
@thenextlayer Ай бұрын
Thanks for watching! I’d love if you’d share with me ONE way I could make my videos better for YOU? Also, consider supporting us on Patreon to get exclusive discounts from many of the brands featured in this video, plus behind the scenes content and early access to videos. patreon.com/thenextlayer
@iTzNicholas Ай бұрын
More clickbait
@calg4920 Ай бұрын
How can I get in contact with you? I think I've emailed months ago but have gotten a reply. 😔
@thenextlayer Ай бұрын
@@calg4920 partnerships@thenextlayer.com
@calg4920 Ай бұрын
@thenextlayer I just emailed you. Also, I apologize, it wasn't you that I emailed it was another person on KZfaq. But thanks for replying.
@enosunim Ай бұрын
My favorite filament can be any color as long as it's cheap = )
@nobocks Ай бұрын
Same, 2kg for the price of one roll of 750g.
@studwhelm Ай бұрын
Same, most of the time. Though, I've been really partial to grey lately
@nobocks Ай бұрын
@@studwhelm Unpopular opinion : For 1kg there is at least 250g who go the " trash " if you are printing mecanical parts even if you are a god in 3d modelling. By " trash " i mean a plastic bag with a note on this hopping someday who can recycle finger in the nose.
@thargorgardner6479 Ай бұрын
Flashforge Burnt Titanium looks amazing
@whitestar71 21 күн бұрын
So does their Galaxy Black.
@calinnilie Ай бұрын
Fillamentum has some gorgeous ones: Gold Happens, Wizard's Voodoo, Vertigo Galaxy, Vertigo Jade are all insane 🤩
@thenextlayer Ай бұрын
Dang. I need to try more of those! My contact at Fillamentum left so I need to get back in touch with them.
@calinnilie Ай бұрын
@@thenextlayer I’ve been leaning heavily into Fillamentum now, despite the slightly higher cost per kg. Their spools are 750g, for me that’s an advantage, more colour diversity in less space, but the quality is exceptional. Give them a try, and if they share some discount codes please let us know ;)
@karelkunz3978 6 күн бұрын
@@thenextlayer Hello Jonathan, This is Charlie from Fillamentum. It's amazing to hear that the community loves our filaments! Thank you. We should definitely connect. We are also celebrating our 10th anniversary this fall! Feel free to write to me at karel.kunz@fillamentum.com, and let's have a nice little call and chat. We can discuss what your community would love to see and share what we are working on at the moment. Best regards, Charlie
@karelkunz3978 6 күн бұрын
@@calinnilie Thank you:)))) Its amazing to hear it:)
@WhatsTheWordBozo Ай бұрын
The most underated filament... Elegoo Black PLA. It has phenomenal quality and you can get 4 rolls for 44$.
@matttilford2601 Ай бұрын
Happy that someone else has found the joy of Ziro 3D. They also have a nice range of the galaxy filaments which i've used too many of.
@thenextlayer Ай бұрын
Yeah! They reached out and offered to let me try some, I’d never heard of them before!
@tenchuu007 Ай бұрын
Hahaha, that blue taped spool side. 😂👌
@johnrichardson1949 Ай бұрын
sorry to be a pain, but your link for the esun magenta-blue doesn't seem to work, having trouble figuring out which of their filaments is the right one.... want to use your affiliate link
@RensMakes Ай бұрын
Love your content (And haircut) Thanks
@thenextlayer Ай бұрын
Thanks mate!
@Dlutheran Ай бұрын
Awesome video and The haircut is looking good bro.
@erichasz7068 Ай бұрын
Hey there! Love your content.
@OneLiterPeter Ай бұрын
Thanks for the video. I have yet to try Filamentum filament. I'll have to give it a try. CookieCad makes some really impressive iridescent filament that prints really well.
@thenextlayer Ай бұрын
Oh true didn’t even think of them. Need to try them out.
@OneLiterPeter Ай бұрын
@@thenextlayer Thanks Man LOL, I just blew $60 on a couple rolls of Protopasta, not in your video but they have some really nice looking sparkle filament. I bought their Wonder Blue Glitter HT PLA and a spool of Stardust Glitter HT PLA. The cost is mostly inconsequential, the fun is in the experimentation. 😁
@karelkunz3978 6 күн бұрын
Hey Petter, you should! Here is Charlie from fillamentum. If you need any help, contact us on Instagram or Twitter(X). Have a nice printing day!
@thegps7197 Ай бұрын
Really nice video. Defiantely going to keep coming back to this video when I'm looking for filaments. Good selection of different effects. Wish their were more ABS or ASA versions of these filaments.
@thenextlayer Ай бұрын
Truth! Make sure you’re subbed. I love doing these types of videos.
@CartaIV 11 күн бұрын
@@thegps7197 check out ambrosia (west3d galaxy Asa) they have some amazing color and their black galaxy has a gold sparkling affect and it’s BEAUTIFUL definitely check them out
@CartaIV 11 күн бұрын
Ambrosia filament has some great galaxy color options as well I love their Asa galaxy, and even the velvet (matte) galaxy is so nice to print with
@JamesTenniswood Ай бұрын
A well produced professional video, good job 🎉
@thenextlayer Ай бұрын
Thank you very much!
@asterlus1357 Ай бұрын
the haircut looks great man‼️🙏 love your content🎉
@ivantrail702 Ай бұрын
Thanks for the review. I'm colorblind, so they really have to pop for me to like them. I like Flash Forge ASA (Blue in particular) as well as their sparkle series.
@itsxolix Ай бұрын
We actually bought some starlight nebula from polymaker as our first fancy looking filament and I personally love it despite having issues printing it at first (nothing to do with the filament just relatively new to the hobby)
@justinchamberlin4195 Ай бұрын
Some of my personal favorite colors: -Flashforge/Voxelab Burnt Titanium PLA -OVV3D Black/Green Shiny Silk (a transition filament from black to forest green to kale smoothie green, with green metallic glitter) -Fusion Filaments Carbon Rod Black HTPLA, ABS, ASA, and HTPET (no glitter, no iridescence, no gimmicks of any kind, and yet it looks truly phenomenal) -Atomic Filament Smoke Blue and Dark Cherry Red CF-PETG (the red was a Maker Box special color and it looks way nicer than the Bambu Lab CF filaments) -Hello3D/Amolen Firefly Glow-in-the-Dark PLA -Snolabs Atrovirens Transparent Blue PETG (sadly discontinued after the SnoDryer debacle) -Elixir Nightshade (get a move on with re-releasing this, please, Printed Solid, even if it means giving up on reformulating Elixir to no longer need powdered colorant) -3D Best-Q Rosewood PLA -FilamentPM Pearl Blue (which can be a shiny, pearlescent blue or a more matte purplish blue depending on your print temperature) -NHH Matcha Green matte PLA -Fusion Filaments Radiated Fog HTPET (translucent yet smoky, with heavy-duty glitter that can only really be explained by the name they gave it) -Coex3D Translucent Blood Red PLA -Proto-Pasta Cloverleaf Metallic HTPLA (a nice forest green but with a hint of gold glitter) -FilamentPM Froggy Gold PETG
@sylas9762 Ай бұрын
Have you test any flexible filament like TPU but they don't suffer hydrolysis over time in humid environment? From what I've known, TPU and PU will fall apart overtime by hydrolysis if left in humid area.
@thenextlayer Ай бұрын
Bingo. They all do.
@seanburton3130 Ай бұрын
You should definitely check out strong hero 3D’s “shadow red” filament! It looks especially beautiful on busts I’ve found really highlighting details with black while the main color is a gorgeous red that can be shiny when printed slowly or more matte when printed quickly! Wonderful stuff! Also it’s a coextrusion pla shell with petg core. They definitely did some witchcraft because normally those two don’t stick together but this one does!
@davidconner-shover51 Ай бұрын
That blue/rose silk stuff. I use that on my IDEX printer to make it last. .1mm layer thickness and 15mm/sec yields a mirror finish
@donnyriggz Ай бұрын
I'm a big fan of iSanmate's wood filaments for projects where I'm trying to imitate wood and their matte rainbow and gradient filaments. Haven't tried that Ziro3d rainbow yet, but I intend to grab some when my current rainbow spool runs out (so probably pretty soon).
@b3nny90 Ай бұрын
I don't use many glitter or silk filaments but when I have they have been small local companies here in Australia. 1 being DREMC and PhaserFPV. They also sell glow in the dark and UV changing filaments too which are awesome for ghosts and "scary" pieces.
@idaner Ай бұрын
Hey, I also live in Israel and I often find that companies don't ship here... how do you manage to get them all here?
@thenextlayer Ай бұрын
Most of them ship directly to me so I can try it and show it in my videos if I like it… but Amazon also ships a ton of filaments free here and I often buy there
@EmoKillsBest Ай бұрын
Do any modifications need to be made to printers before attempting to print any of these filaments? A hardened steel nozzle, for example?
@thenextlayer Ай бұрын
Only for the PLACF. The rest no need for special nozzle.
@EmoKillsBest Ай бұрын
@@thenextlayer Awesome, thanks for your reply! :)
@deviouscat0 17 күн бұрын
I've used Jessie's soul black glitter PLA and I feel like it has the perfect amount of glitter, but they also make it in a PETG version which could substitute polymaker galaxy black as they don't make it in a PETG version.
@zxamz Ай бұрын
Wow 😮 polymaker Galaxy black is expensive, but ordered it anyways today and arriving this pm and trying it out this pm … let’s see if the layer lines are visible
@thenextlayer Ай бұрын
Nice. You’re going to love it!!
@BeardedPrinter Ай бұрын
Both my wife and I LOVE Fillamentum's voodoo filament. It is so beautiful.
@Roobotics Ай бұрын
FYI, with it being out of stock currently, it looks pretty much identical to what other filament manufacturers call 'burnt titanium'
@karelkunz3978 6 күн бұрын
Hello, Bearder, here is Charlie from fillamentum. We are working on Wizards to bring it back this fall!
@alcawmk Ай бұрын
I'm trying to find a filament company that I can purchase multiple shades of certain colors. What company would you recommend?
@thenextlayer Ай бұрын
Polymaker
@TinTalon Ай бұрын
Great video and happy to say i have most of those filaments you listed. Another absolutely filament that i would recommend a look at would be AMBROSIA ASA Galactic Filament of the Gods Galactic Midnight Meteorite or another of the ASA Galactic colors. Another interesting filament would be Stronghero3d Shadow Golden Fire,Core Shell co extrude (it is PLA with a PETG core) makes for some interesting effects. One last filament to check out would be ProtoPasta Blood of My Enemies.
@Nothwarren Ай бұрын
Ok so elegoo seems to be selling the same first filaement under the name galaxy black on their site
@triplenickelniner 29 күн бұрын
I really wanna start this hobby but my concern is venting. I have a small home office so I’ll be looking for a small 3-D printer just to get started and I am concerned about the fumes and dust. I always thought that you could print with PLA and not need to vent your machine, but I keep reading online. That’s not the case and you should vent every 3-D printer, please let me know your thoughts😊
@dwilliam16 Ай бұрын
Have you printed anything with PolyLite Metallic ABS?
@thenextlayer Ай бұрын
No! I didn’t even know they had metallic ABS… that’s awesome!
@dwilliam16 Ай бұрын
@@thenextlayer Right now only two colors, and I have yet to use them. Also, if you like the purple/pink/blue blends, there are companies that make a filament color labeled as burnt titanium I think you'd like.
@jme2006 Ай бұрын
Protopaste HTPLA+ comes in excellent colors and texturing. Worth a support.
@twisicornetwisigames9665 Ай бұрын
What about Marble Pla to hide the layer lines ?
@dthree4113 Ай бұрын
Elegoo makes a nice filament that looks a lot like the Wizard's Voodoo. It is confusingly named "Galaxy Black'". Big fan of the Starlight series also. Comet was the perfect color for a dragon's egg I made as a gift recently.
@alentor Ай бұрын
Is is possible to order Bambu-lab refill filament to Israel?
@thenextlayer Ай бұрын
3DBotX might have some in stock
@alentor Ай бұрын
@@thenextlayer Yeah, Love them! have ordered from them spare parts for p1s the other week as they are the only ones who actually care these stuff and have them in stock.. It would be great if you get sponsorship form caliber3d, seeing that you also like PoyTerra Matte, and get sponsorship discount, I'd be more than happy to use it :P wink wink Thank you for your quick reply
@Kaftejist Ай бұрын
just steal some
@AndrewAHayes Ай бұрын
I have stopped buying filaments that I like as I have far too many, I now only buy the filaments I need!
@radiotbo4646 Ай бұрын
nice hair cut haha ;)
@meviews Ай бұрын
Much better title for the video. It made me click on it where as the one before didn't intrigue me
@thenextlayer Ай бұрын
We are testing about 10!
@JoshFisher567 Ай бұрын
Bambu ABS GF is one of my new filaments, stronger than ABS and less warping/micro cracking and the glass gives it a mat finish. Especially at 30 for 1KG. Below is from their site Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.
@UberGTO Ай бұрын
Current favorites are Ziro3D Neon Matte PLA and Bambulabs PETF-CF in black. The Ziro3D just looks fantastic and the PETG-CF comes out so nice people think its injected molded at first glance.
@thenextlayer Ай бұрын
They have a NEON too?!?! Gotta try that
@JH-zo5gk Ай бұрын
Your CF prints are weird. Mine don't have that texture, they just look matte, but exactly the same as a normal pla part.
@dragohek 15 күн бұрын
some of the links are broken
@My3DPrintz_X1 Ай бұрын
Do the "sparkles" effect the nozzle?
@thenextlayer Ай бұрын
Nope.
@YouTubestopsharingmyrealname Ай бұрын
Numaker's Nuclear Red. it's a bright red with a little bit of shine and a slight blue iridescent quality
@HenrySavinon Ай бұрын
Where's the wood filaments? I'm curious as to how many variation exist
@andrewmoore5712 Ай бұрын
3DQF regal black is great, black with subtle gold glitter
@ziruszirus1654 Ай бұрын
I really love #Nobufil filament - many basic colors, great strength and easy to print.
@scifimodelshop Ай бұрын
Sliceworks CAN YOU SAY out of stock! is this even made in US? sent email no answer, tried to chat, no answer, called went to voicemail. Please stop promoting places that do not want customers...
@CJ0175 Ай бұрын
Overture Rock (Marble) PLA is one of my favourites.
@mikesprague Ай бұрын
So many filaments seem like they're made in the same factory but them branded later...like the Sliceworx matte gradients are the exact same as Isanmate...
@barmacg30 Ай бұрын
Burnt Titanium is one of my favorite colors. Flash Forge and a couple of other companies make it and it is not expensive. PLA prints out the best I do have it in PETG but it doesn't print out as nice as PLA
@psballent Ай бұрын
Elegoo Galaxy Black is one of my favorite beautiful filaments, although it's dark blue, not black
@aloreactusplayer1776 Ай бұрын
this maby just me but what is up with the to put it nicely not so nice looking prints i mean i love the show en tell of the filaments but the prints look like ,,,,,,, and i know from looking at your other videos that you can print beautifull prints but this just makes me wonder and not wanne buy these, is it the filament that looks nice and prints like doegie or are these just cranked out for referance
@Jynxx_13 Ай бұрын
Stronghero 3D makes Wizard Vodoo PLA and PETG that is a blue/purple sparkling color shift. It's beautiful.
@thenextlayer Ай бұрын
Nice I’m gonna check it out thanks. Never tried their filament.
@fuzznickers Ай бұрын
You cut your hair 😮 Thank you for sharing everything you do!
@josephfcarrillo Ай бұрын
not a beautiful filament, but by far the best PLA that I have used Elegoo pla Pro it’s a little challenging to print the first time, but it gives me fantastic results and it is dirt cheap smoother, stronger, and more resilient than all other PLA+
@toadiloader3183 Ай бұрын
Yo, nice haircut dude!
@user-wj1gk4iy7t Ай бұрын
Truely jaw-dropping filament.....have been watching the video 5 times still cannot understand which to choose and which not to😂😂😂😂😂
@thenextlayer Ай бұрын
Glad you liked it. If I had to pick my favorites from within this list, Polymaker galaxy black, starlight comet, and fillamentum wizards voodoo.
@73FPV Ай бұрын
I dig the Hair cut, But im Bald, sooo. Great edit. Great info, as always. Thank you.
@thenextlayer Ай бұрын
Thanks for watching!
@FyrbyAdditive Ай бұрын
Ohhh that looks like my V-Spooler in the video! Hope you like it! :)
@thenextlayer Ай бұрын
Stay tuned, I’m doing a video about it next week!
@FyrbyAdditive Ай бұрын
@@thenextlayer exciting, looking forward to it!
@nadir3D Ай бұрын
Another great video. btw This looks familiar 0:13 and 5:05
@charlesfe Ай бұрын
CookieCAD is another producer of great matte color change filaments, color palette looks similar to SliceWorks. CookieCAD's Galaxy Black is really good too.
@Spikeon01 Ай бұрын
The Ambrosia PC-ABS black is AMAZING if you haven't played with it yet! And it's cheap!
@Gryfang451 Ай бұрын
For texture, I usually use fuzzy skin at a 0.4 to 0.6 on both settings in Prusa slicer. The only part that isn't textured at that point is the top. Rather than paying the CF "tax". I've tried PLA+ CF, and PETG-CF recently, and I haven't found them lacking, but at their price tag compared to a regular filament for an additive that really doesn't do much, I have to say it's not all that impressive.
@thenextlayer Ай бұрын
Smart!
@laramieist Ай бұрын
I’ve used paramount 3D and honestly the colors are top tier and it I believe it is pla+ but just says pla.
@thenextlayer Ай бұрын
Thanks I’ll check it out!!
@larrywright72 Ай бұрын
How abrasive are those carbon fiber filaments? Do they require a hardened nozzle?
@thenextlayer Ай бұрын
Very and yes
@TFMitch Ай бұрын
Surprised I haven't seen anyone mention CookieCAD. I love their Elixir PLA line
@thenextlayer Ай бұрын
Haven’t gotten my hands on their filament, I don’t think they ship to Israel… but I’ll reach out!
@BeamBros. Ай бұрын
You totally forgot Proto-Pasta's Empire Strikes Black!!! No mention of Proto-Pasta at all... Kinda makes me sad. You should really check them out, great stuff!
@thenextlayer Ай бұрын
I don’t think they ship to Israel, do they…? I’ve looked before but ended up not ordering, I think that’s why
@BeamBros. Ай бұрын
@@thenextlayer Makes total sense.
@zviratko Ай бұрын
Also you should have mentioned some exotic filled PLAs, like Francofil Coffee or Scallop, those make stuff look (and smell :)) not-printed and actually different, or compare wood-filled filaments to PLA-CF because PLA-CF is cheaper, stronger and doesn't clog nearly as much as wood, yet looks very similiar... if only it came in brown. But the green one is extremely similiar to colorFabb Vibers/stoneFill (it's same stuff with different colouring).
@thenextlayer Ай бұрын
Haven’t tried francofil but maybe I can try it and do another video. Thanks!
@zviratko Ай бұрын
@@thenextlayer beware of their Oyster filament, not only does it clog but my cat likes crunching on it :) (it does smell fishy)
@grzegorzszachowski9541 Ай бұрын
You should definitely Printe-me Ampere PLA/TPU that conducts electricity.
@bio.s2903 Ай бұрын
you should cover the new diy edm machine by rack robotics
@drewlarson65 15 күн бұрын
Wait, this is just about how pretty a filament is? *yawns* yea Imma head out
@darren990 Ай бұрын
nice hair cut
@anwyll Ай бұрын
Can't believe this video did not include Protopasta - worth including for their HTPLA range and also for their matte fiber composite range. They also often have a bunch of recycled PLA pastel type colors available for limited runs. Not to mention their metal composite filaments! Their prices are a drawback for prototyping but for immaculate final parts they're among the best. Edit: I do make this comment from the US market, I have no idea what Protopasta's availability is anywhere else 😕
@thenextlayer Ай бұрын
Yeah I don’t think they ship to Israel but I’ll check
@anwyll Ай бұрын
@@thenextlayer Or if they do I shudder to think of the cost 😕 Until Filamentum had their US shop I just could not justify buying their stuff for the same reason. But I didn't think of market limitations when originally commenting
@WorldWide3133 Ай бұрын
What I don't understand is how you payback the loan without selling anything if you don't have an income stream. I get the borrowing advantages
@SianaGearz Ай бұрын
I'm pretty sure black HIPS would be your favourite filament, you might get addicted.
@thenextlayer Ай бұрын
Gotta check it out. I have heard that hips don’t lie.
@ryanencinas4253 Ай бұрын
Fancy Pants but more in the wallet. Jayo. Super simple reason. It's descent, they give you 1.1KG, and they're cheap.
@roadview3868 Ай бұрын
Hello :)
@tilengtr5747 Ай бұрын
Great video, love from Slovenia! עם ישראל חי
@mikechudzinski6629 Ай бұрын
REVIEW Glow filaments !!
@nakleh Ай бұрын
2:41 that bench is filthy.. if you gave it 5 seconds of cleaning it would look presentable on camera :)
@TS_Mind_Swept Ай бұрын
5:57 I guess this is a hot take or something, but I really don't mind layer lines, and I don't know why people always make such a big deal about them 🤷🏿♀️ I honestly think the messy looking faces look worse..
@MultiHippie13 Ай бұрын
inland PLA Blue Black Shimmer CC3D Antique Silk Gold
@thenextlayer Ай бұрын
Never even heard of CC3D gotta check them out
@minecraftbasics7173 Ай бұрын
CookieCAD, any gradient.
@minecraftbasics7173 Ай бұрын
Ask Joel.
@groberts1980 Ай бұрын
I would use a lot more PolyMaker filament if they used plastic instead of cardboard spools. I'm strictly an AMS user.
@thenextlayer Ай бұрын
You can pop off the sides and put them on Bambu spools, or print rims for them :)
@groberts1980 Ай бұрын
@@thenextlayer I tried all the things when I started 3D printing. Adapters didn't work, taping up the edges didn't work. I think I may have had issues getting the Bambu spool ends back together once tension is let off the cardboard spool but I'll try again since I still have some leftover cardboard spool filament laying around. I tend to stick to plastic pools when ordering new filament. Though I do wish more filament makers would offer refill spools that go directly onto old spools.
@CurtisCreations402 Ай бұрын
Don't be sleepin on thos glow in the dark filiments 😴😴
@4140ajj Ай бұрын
...haircut! 😱
@DrSwolemeister Ай бұрын
Yas print daddy
@Eric_In_SF 7 күн бұрын
Galaxy black, you’re crazy :-) a little sponsor bias. I think the poly maker actually looks the worst. And the sparkles are too dominant. Really chunky and kind of tacky looking like quartz PLA. Part of the reason you’re seeing Prusa being a little lighter because it actually is a nice matte finish instead of that more cheap looking shiny black like the other two.
@thenextlayer 6 күн бұрын
In person, it's actually opposite! The Polymaker is very matte (Kexcelled even more, but it has barely any sparkles)
@JacksMacintosh Ай бұрын
Love to see that my feedback about the filament tags was incorporated 😊 And תתחדש on the haircut!
@SomeoneAbstruse Ай бұрын
Was there supposed to be any innuendos or were they cut out? If this is your 'full of innuendos' then we need to start analyzing your scripts
@thenextlayer Ай бұрын
lol wait till next week bruh
@sealofthesea5233 24 күн бұрын
honestly I hate shiny filament, it looks really cheap. I prefer Matte.
@spyrule Ай бұрын
So sparkles... or none.
@zviratko Ай бұрын
Silk PLA is not weaker than regular PLA, it is softer but has a higher impact resistance and higher layer adhesion. PLA-CF* < PLA Matt < PLA < Silk PLA. Extremely silky PLA is almost like PETG (including the poor overhang performance). And that dual tone Sovol/eSUN filament is probably the same as sold under Creality and other brand names, I printed a lot with this particular filament and only realised I swapped brands after printing tens of piece with both - there's absolutely no difference, I believe even the part number is the same if you look at the spool. * or other PLA with fillers that (usually) make it stiffer but weaker across layers
@thenextlayer Ай бұрын
In my experience silk PLA has TERRRRIBLE layer adhesion, actually.
@zviratko Ай бұрын
@@thenextlayer weird, I would question your print setting were it any other channel :) I usually print it really slow, though, like 30-60mm @220C (but with steel nozzle that's more like 210 on brass). I believe silks are even described as I did by the manufacturers. It's also possible there are completely different additives used for silks to achieve the high surface tension, for example some are close to impossible to remove from a textured pei plate (most of what I use) and I have to create a separation layer. Just finished scraping some of my plate 5 minutes ago :) I commonly use it in place of petg for gears and stuff (as long as it's not under load). Are you sure you mean layer adhesion? Because they are pretty weak for mechanical stuff, gears under load just melt and bend but the layers hold fine.
@thenextlayer Ай бұрын
Nah, dude, layer adhesion of silk is considered to be the worst of all the PLA's.
@canadaplease7981 Ай бұрын
Really weird that you are trying to introduce people to new filaments and don't mention at all that at least half of the filaments that you mention should be run with a hardened nozzle of some form. I guarantee someone is going to run one of the CFs on a stock brass nozzle and wonder why their printer started printing like shit
@charlesrestivo870 17 күн бұрын
Bit to much talking his intro is painfully long
lev89k
Рет қаралды 2,1 МЛН