The BEST SAW You've NEVER HEARD OF!! (Multitools--Great For Remodeling!)

Рет қаралды 1,488,845

3 жыл бұрын

Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Dewalt Cordless 20V Multitool Full Kit:
amzn.to/3sKEeCg
Dewalt Corded Multitool Full Kit:
amzn.to/3bTk8Pn
Rockwell Sonicrafter Multitool (Great Deal!):
amzn.to/37ZOkqX
Galax Pro Multitool (Great Deal!):
amzn.to/30a1opn
Vtopmart 20 pc. Multitool Blade Pack (Best Seller):
amzn.to/2NNqibV
LEILUO 24 pc. Multitool Blade Pack:
amzn.to/3bWdwzJ
WORKPRO 24 pc. Multitool Bit Variety Pack:
amzn.to/3sKEjWA
(Please Note: these are affiliate links, so when you shop through them, we receive a very small commission at no extra charge to you. We greatly appreciate your support!)
FOLLOW US ON INSTAGRAM:
/ thehonestcarpenter
FOLLOW US ON LINKEDIN:
/ thehonestcarpenter
Many DIYers have never even heard of the best saw for remodelers--the oscillating multitool! Multitools are much overlooked, but they can completely change your carpentry game. In this video, The Honest Carpenter explains what makes them so great.
The BEST SAW You've NEVER HEARD OF!! (Multitool--Great For Remodeling!)
Oscillating multitools--or, just "multitools"--are electric tool that vibrates a bit or blade side to side in roughly a 1/2" sweep. By producing this motion, they power the bit or blade to perform a function with great control.
Multitools can be used as sanders, with sanding attachments, and their shape lets them get into places where palm sanders can't. Also, they have several popular scraping and grout-cutting attachments.
But, as a professional remodeler, I've always primarily used multitools as a SAW. I think their cutting function is what makes them so extraordinary.
By utilizing their narrow, side-to-side vibration, you can easily make PLUNGE CUTS--something that nearly all other power saws struggle with.
Multitools can also make FLUSH CUTS, because of their offset bent necks. The blades can be set directly on a surface, and used to cut protruding material at the base.
Multitools also utilize metal-cutting bits for cutting or notching light-gauge metal.
Oscillating Multitools do have a couple drawbacks:
--They're very loud, and blades are sharp. Use it with both hands, and don't pass a moving blade over your body. You may drop it!
--They go through blades quickly (multitool blades wear out)
--They become ineffective when blades are dull. The multitool will bind up, or take forever to cut.
--They aren't great for long cuts. Save those for your circular saw or even jigsaw.
Otherwise, because of their ability to make drop cuts, multitools are a dream come true for people remodeling or renovating houses!
Thanks for watching!
Be sure to visit us at The Honest Carpenter website:
www.thehonestcarpenter.com

Пікірлер: 1 600

@edwardschmitt5710 3 жыл бұрын

"The Honest Carpenter" "The best SAW" thumbnail and video about an oscillating tool. I've burned through three now, but never called it a saw. Don't know anyone who does.

@TheHonestCarpenter 3 жыл бұрын

You’re right. I mean, it’s got a little light on the end too...maybe should’ve called it the “best little light for remodelers?”🤔 Missed opportunities!

@edwardschmitt5710 3 жыл бұрын

@@TheHonestCarpenter Mine is called Ossy. I tell my worker to "go get Ossy out of the truck" lol. Used mine this morning to sand with. I've burned through a Porter Cable, Craftsman, and now I have a Westool. The variable speed ones seem to shake themselves apart after a year of heavy use so far. I mostly use Bosch tools, but theirs is 200$ and only takes their own "starlock blades"

@1stinlastout165 3 жыл бұрын

You can use Fein blades but Bosch are a little cheaper. Try the ones that are arch shape they tend to cut faster,more accurate and not over work the lower powered motor models!

@edwardschmitt5710 3 жыл бұрын

@DR PHIL I did look at that one but the whole "bare tool" buy the battery and charger for $$$$ separately stops me. All the manufacturers decided to rip us off like that suddenly as a group....

@stevepseudonym445 3 жыл бұрын

Anyone who doesn't recognize that it's a saw has a flawed thought process. Does the blade have teeth, and do the teeth go back and forth to make cuts? As for calling it a saw, the best name I've heard for it is a "jiggle saw" which is a really good description, and at least 40% shorter than other names for it.

@wilcogrundens9086 3 жыл бұрын

I've been a carpenter for 33 years. I've been running an oscillating saw since Fein came out with it at least 20 years ago. I'm now having major nerve problems in my hands and arms. Of course, many other tools involved, but the multi is an obvious major culprit. Please consider getting the best anti-vibe gloves you can find if you intend to use this tool frequently. There are things these cutters can do that really shouldn't be done.

@slatsgrobneck7515 2 жыл бұрын

Thanks for that important reminder! safety glasses, hearing protection, dust mask, and add anti-vibe gloves; if you like working with your hands - take care of them. :)

@HJules-cw6fb 2 жыл бұрын

Thank you

@Dbb27 2 жыл бұрын

I’d been having nerve problems. I picked up my calcium intake just by drinking milk and it’s made a major difference. I don’t know if it will help you but worth a try.

@melissacook5186 2 жыл бұрын

Like what?

@nameless-og 2 жыл бұрын

@@melissacook5186 like dry wall for example. Its not that much harder to just cut it, and its not as clean ... But maybe not use the tool for that unless its for cutting out an electrical box or something where you want a clean edge.

@mandysmith2961 3 жыл бұрын

I purchased my first oscillating tool to cut the base of a cabinet to replace it due to water damage. No other saw would have gotten into that small space. I was quoted $350 to do the same job by a professional handyman because he would have had to remove the entire cabinet to do the work. Including buying the tool, the blades (which is also used in other projects), the wood and fasteners I paid about $60 and it took me about an hour. I'm also a mother with a toddler, so saving time and money is a must!

@HJules-cw6fb 2 жыл бұрын

awesome

@justink2101 Жыл бұрын

How did you get the new base board in?

@mesohunt704 Жыл бұрын

@@justink2101 measure it, cut it and then miter/cope it depending on the piece. Then put it where it’s going and nail it in with trim nails would be my guess. I don’t really know any other way to do it. I guess you could use trim screws or some kind of adhesive if you wanted to but it’s still basically the same.

@justink2101 Жыл бұрын

@@mesohunt704 the way the post is worded I assumed they were replacing the entire bottom piece which would never fit through the doorway. But I think I interpreted it wrong. Thanks though.

@MandenTV 3 жыл бұрын

I’m a plumber and we use this to cut drywall and old copper lines and whatever else it can cut through. It’s like cutting through butter with a hot knife, it’s awesome.

@chrisgraham2904 2 жыл бұрын

Great for plumbing because 90% of everything you do is in a tight, dark space.

@dustinpomeroy8817 3 жыл бұрын

You know I was a carpenter for years,dabble in it still.Every since Fein came out with it I always saw the multi tool as a gimmicky kind of thing and never used one or took it seriously.I had one laying around brand new in the box I got free from Harbor Freight,had it for years just sat in the box.Well last summer I was doing something and broke my sawzall blade,I didn't have much more to do and didn't wanna run to the store so I gave in and figured Id give the multi tool a shot.It was at that point I realized I'm a hard headed idiot 😅.My God,I was just notching out a 2x6 for outriggers and I was so amazed how fast and accurate it was .Fast Forward a year I gave the HF one away but now own 2 M18 multi tools and I am always using them.Looking back at all the things that a multi tool would have made easier but I was just to stubborn to give it a shot I am kicking myself in the pants.

@victorglaviano 2 жыл бұрын

See I haven't spent enough time as an idiot (started in 1984, I'm obviously not very smart), I own one just have never warmed to it. I'm still the #1 advocate for a jigsaw, I can cut nearly anything with one, if you happen to ehhh over do it, worse thing you'll probably have is a badly scrapped finger!

@allan4210 2 жыл бұрын

When I was doing cabinetry, on site installs always had trim that needed to be cut or outlet holes, things that are impossible or tricky to do in the shop. My boss would haul out the Fein, cut, and then when putting it away would say "I love this tool". Didn't understand until I had to work without one. Took two jobs without one to give in and buy it!

@jimhoward1655 2 жыл бұрын

Better late than never Dustin. In certain situations there's nothing that can compare to the little jiggler and its laser like precision!!

@charlesmalone4379 3 жыл бұрын

Ironic that as an orthopedic surgeon, I have been using these oscillating saws on bone ( and casts) for 40 years. Now I am getting my first one for my home😎

@richardhall6762 3 жыл бұрын

That’s great-I found out my orthopedic surgeon used one on my knee. He says he’s doing carpentry work as a surgeon but I say it’s definitely fine finish carpentry!! Do you know if Fein Tools (Germany) manufactured your surgical saws? Thanks for your good work-we old carpenters and tradesmen are grateful to be sure!!!

@edwardschmitt5710 3 жыл бұрын

@@richardhall6762 Slight pay difference....

@jimwatchyyc 3 жыл бұрын

Good to know, I can save myself money and perform my own orthopedic surgery a DIY project ;)

@charlesmalone4379 3 жыл бұрын

@@jimwatchyyc it may hurt a little. Remember measure twice,cut once.

@theropesofrenovation9352 3 жыл бұрын

lol. Good point and you don't have to worry about an infection!

@julietromeo872 3 жыл бұрын

If you ever have have a door that is dragging on the floor, this is the perfect tool to slightly trim the _bottom_ of the door for clearance. Just rest the blade on a spacer, say 1/16" or 1.5 mm, and then trim the bottom edge of the door. Easily done without having to remove and re-hang the door.

@Dbb27 2 жыл бұрын

Never thought of that. Perfect!

@Wen6543 Жыл бұрын

Too much work and wear for the saw specially if the door is thick and made of hard wood. Much better to remove it and just use a circular or jig saw.

@brianwoodruff9967 2 жыл бұрын

Pro Tip: Install the blade on any multitool PERPENDICULAR to the handle of the tool. You have far more control and it makes it easier to rock and slide the blade so you’re not holding the blade in one spot and grinding down a notch into the blade into that one spot. Your blades will last longer and you will make cleaner, more controlled cuts. Try it! You’ll never go straight again.

@OregonDARRYL Жыл бұрын

Yes, it seems logical that you would have much more control than the leverage the blade has when sticking out the front. It seems like a no brainer, but I do realize sometimes you need to get into a spot... so that's the only time I would extend it out front.

@matthewh1510 2 жыл бұрын

Bought one of these (Ryobi) at a yard sale for $4. That tool has come in so handy over the years! How I got by without one for 40 years I don't know!

@CW-hb1yi 3 жыл бұрын

When the spacing between porch planks gets filled with gunk, it becomes my go to tool. Also I glued a piece of sandpaper onto the bottom of a dull blade to sand hard to reach corners.

@KY_CPA 3 жыл бұрын

That sandpaper idea is ingenious, thank you! I'm running in to issues with the gunk in the cracks of my deck... Do you just swipe the tool through the cracks without it being on?

@shawnr771 2 жыл бұрын

@@KY_CPA I use dull blades for removing trim caulking. The vibration works just fine.

@lilcreaper007 2 жыл бұрын

How TF.... Bro why did I never think about that ?! Holy cow , we're like chimps learning to use to spears

@zLigHt44 2 жыл бұрын

I bought a old 5th wheel trailer, the roof was resealed, but terrible job, leaks in several places, the guys that did the work didn't remove the old caulk, because you need to use a heat gun and scraper, not anymore.... Let's do this !

@BoraHorzaGobuchul Жыл бұрын

They can also be used for removing plants growing between the pavement stones of whatever you call 'em. A gas burner is fastest for this, but you can't use it in some places.

@graemeroberts2935 3 жыл бұрын

I had no idea such a thing even existed, but as I watched and listened I kept thinking of situations in which I could have used it. Thank you! You are obviously a skilled and knowledgeable carpenter, in addition to being honest, but you are also an outstanding communicator. Your writing is clear, precise, and appealing to the ear, and, best of all, you understand and consider your audience. Bravo to you, Sir! One of the reasons I love KZfaq is that it reveals and provides a medium for extraordinary talents like yours.

@tuncgercek6155 3 жыл бұрын

An important point omitted in the video: This tool is a lot *less* dangerous as a saw than other saws because the oscillation pitch is so small that if pressed against your skin, it actually won't cut it at all. For most parts of your body, your skin and the flesh under it will just vibrate with it. In that respect, completely different to a circular saw or jigsaw. It'd still be painful nonetheless, and riskier on parts with less flesh (tops of fingers & toes, kneecaps, skull, etc.) but nowhere near as dangerous as a circular saw.

@theoriginalchefboyoboy6025 3 жыл бұрын

if you are using the longer toothed wood cutting bit I'd doubt that. for the finer bits I'd agree.

@SumDumGy_formerly_Tim_Walden 3 жыл бұрын

I agree with you about how safe this tool is. I’ve pressed mine against my skin many times. However, I still feel the circular saw is the safest simply due to the retractable guard. It’s really difficult to come into contact with a spinning blade on one unless you’re a complete moron with power tools.

@ethanheyne 3 жыл бұрын

I've seen a batch of these used at an orthotics factory, mostly on plastic. The workers were fine with putting the vibrating blade against their palm, but those blades didn't have aggressive teeth and the palm is a padded part of the body.

@karimshaban 2 жыл бұрын

Exactly! The vibration is 1-2 degrees max - so anything that has a little elasticity will just vibrate with it. So skin and flesh are safe. On the other hand, yes, it can cut through rigid materials like nails or bones without any issue.

@pilotdog68 2 жыл бұрын

@@theoriginalchefboyoboy6025 actually the teeth size don't matter much, unless you stab it vertically into your skin kzfaq.info/get/bejne/ramnmNyn2KirfWQ.html

@BruceWNelsonMangyFetlocks 2 жыл бұрын

As a remodeller, I would NEVER be without one anymore. They make SO many tasks easier and faster. My brother turned me on to them about 5 years ago. They are a game changer.

@pat7473 3 жыл бұрын

I'm still looking for a toothbrush adapter for my multi tool.

@aerundel 3 жыл бұрын

The Oral-B Multitooth Brush

@lilcreaper007 2 жыл бұрын

Dildo on sawzall..

@kellyzak2375 2 жыл бұрын

I recently restored an old wood staircase. We removed the carpet first which was no problem but them discovered there was old, glued down linoleum underneath. I used this tool to no only help pull the laminate off, but removed the leftover glue on the wood. This tool saved me hours of work and frustration. Great tool to have.

@carlyw60 3 жыл бұрын

I am addicted to your videos. You explain things in such a simple concise manner even an amateur DIY'er can comprehend what you are talking about. Thanks for the great tips, pro's and con's.

@TheHonestCarpenter 3 жыл бұрын

Thank you for watching, Carly! 🙂

@lockedloaded4942 Жыл бұрын

I want to thank you for your videos. I'm a new DIY'er and have been binge watching DIY youtube videos. Your videos are some of the best. You get right to the point, you provide information in a straight-forward easy to understand manner and I appreciate that you don't waste my time by spending the first 5 minutes of the video rambling on with useless information. Two thumbs up! New subscriber.

@avega2792 3 жыл бұрын

The oscillating motion prevents it from breaking the skin if you happen to graze the blade. The stroke isn’t long enough to break skin unless you’re really digging in with it. An oscillating tool os pretty much what is used to remove casts, and in fact that was the original intended purpose of an oscillating tool. It wasn’t until later that someone figured out it would work for more than just removing a cast.

@ScorpionRegent 2 жыл бұрын

I remember a doctor using one to cut the cast off my arm in the 70's. It tickled when it touched skin.

@luifranco1457 2 жыл бұрын

I was using mine the other day to work on a section of a fence I recently repaired to cut through a fastener and I wasn’t expecting it to cut through it so quickly, so it flew past the fastener, got caught on the wood on the way and went left towards my hand. It cut through my work glove like butter around the thumb area (glad I was at least careful enough to wear my work gloves that day). I wouldn’t test it on skin!

@Cyanide300 3 жыл бұрын

These tools were originally invented for removing medical casts without cutting the patient's flesh. They are very effective on hard brittle materials like tile, grout, drywall, and concrete/bricks and become less effective the softer the material is. While the ones built for construction are generally more dangerous than the ones built for medical use, the oscillating action of these tools is still much less damaging to flesh than the ripping action of a circular saw or sawsall. That said, you should still wear anti-cut gloves when using them and keep the blade pointed away from your fleshy bits. Also, the nice thing about these tools is that they stop very quickly after you release the trigger, so if you just don't lock the trigger in the on position it won't take your toe off when you drop it. One other thing to watch out for with these tools is fire. The oscillating blade can create a lot of friction when used on soft wood or wood products like MDF, and they can actually set those materials on fire if you're not careful. Like I said, best to use these things on hard materials and avoid trying to cut anything that creates a lot of flammable dust.

@pinecone9045 Жыл бұрын

I discovered a Fein multitool the week after I hand repaired 85 window panes. It was the only one on the market at the time, I thought whoa nelly where you been all my life.

@ILoveAnchovies334 3 жыл бұрын

who hasn’t heard of a multitool? they’re everywhere

@AttentionSpam 3 жыл бұрын

A few years ago when I first started working for my dad one of the new guys said we needed one for a certain job. My dad laughed and said he never had one or needed one. After me and the new guy struggled for a whole day we bought one. Now every guy in the company has one. Great tool

@deanfirnatine7814 3 жыл бұрын

I had a family member who worked various construction and never heard of one, I was like you got to get one.

@geraldkovach9160 3 жыл бұрын

I used my oscillating tool with a knife attachment to remove old glue from the studs when re dry walling. It cut it off amazingly fast. It even seemed to work best at a low rpm. The slow speed seemed to jar and cut the glue and chip or chisel it away. This slow speed saved the battery life of the tool as well. Good show, keep up the good work!!!

@robv2918 3 жыл бұрын

I remember being a child and my doctor cutting my cast off, after my broken leg bone healed. He explained how the tool worked and reassured me it would not cut my leg off in the process! That was approx. 30 years ago and here I am, about to plunge cut into some rotted trim boards on my house.

@AlexCarlberg 3 жыл бұрын

I've been looking for a good introductio to multitools. You're video sytle is much appreciated -- no gimmicks, just a lot of informative information. As a new DIYer, I also greatly appreciate that you provide a range of product links to choose from.

@noplanetb2293 3 жыл бұрын

You explain things so well...Really enjoy watching AND LEARNING!

@harrisond8132 3 жыл бұрын

Heard of it. Been using it for a couple years, and yeah, definitely my favorite, especially in my old house.

@lovefeist3136 3 жыл бұрын

I'm a DIYer. The multitool changed my life! How much time and trouble it would have saved me if I'd had one 20 years prior. I consider the $100 I spent on it "Free." For the meticulous and perfectionist, it's a gift, really. But it is one of those machines that, like a printer, you complain about every time you have to buy blades ("ink cartridges"). For cutting metal, I've found the carbide blade essential, and they are pricier. And, like a jigsaw, guide the cut, let the blade do the work. If you have to start pushing the tool, replace the blade. I've used the multitool in all the situations described, wood, trim, old nails (how do you get that nail out that holds the outlet box to the stud without disturbing the drywall? Multitool !!), plumbing (most recently, bathroom faucet handles that are corroded and frozen, the screw top rounded off after failed attempts to remove it with a screwdriver---not much space to use a hacksaw). WARNING: Whenever you're cutting metal with this tool, be prepared for the fine metal shavings that will be created in abundance. Have a vacuum handy or mask the area to collect the fines. Wear goggles and an N95, especially for overhead work.

@jayson3900 2 жыл бұрын

That's such a great tool. I've used them for trim work, cutting out notches in drywall for boxes, and several other applications.

@thistledowntreasures7990 3 жыл бұрын

Love my ‘oscillating’ saw or as my husband calls it the ‘whing dinger’. He’s growing in appreciation for it’s many uses especially in tight spots.

@thomasgreen8532 3 жыл бұрын

I have. Fein tool, I bought it when they were the only one making this tool. 20 years ago. I bought it so that I could plung cut into hardwood. Now you can get a nice one for under a hundred bucks but I paid over 400 bucks for mine. I have been in situations that it is the only tool that will work at all. I used only when I was stuck because the cost of the blades and there was only one store in the area that carried them. They were not always available . Thankfully the cost has come way down and every DYI store carries them. For someone who does a lot of remodeling this is a must have tool. By far the best tool like this is the Fein. But they are expensive. But then they last a long time too.

@michaelosmon 3 жыл бұрын

The new Fein multi tool has a quick release, ramp up start, and a 16’ cord. My brother had the original and it lasted forever, I think it’s just the switch that failed but he replaced the whole tool. I bought the new one, it’s the best multi tool I ever used....was on sale at menards for $90 and even came with 5 blades. The dremel brand was my first, burned out after about 40 hours of use. Bought a cheap harbor freight one to finish the job the dremel died on, but the case of that tool stopped staying together and it vibrated less after that. I’ve used dewalt cordless, Milwaukee cordless, Fein is the best

@thomasgreen8532 3 жыл бұрын

Yea, no quick release and no ramp up trigger but it does have an adjustment speed knob on the side. I love that the fact that all the newer blades from other companies will fit mine. It’s a bit of a pain changing blades but I only use it for specific jobs it not too bad. If I really wanted that feature I could always buy a cheap on.

@chrisgraham2904 2 жыл бұрын

Fein invented the tool and it's a quality product.

@MishawakaPilotsClub 3 жыл бұрын

Never heard of...? No disrespect but anybody that's been doing any kind of carpentry or handyman work has not only heard of this but has been using it for years. A must have tool for sure!

@SlipTheJabPodcast 3 жыл бұрын

Was looking for multi-tool information for our studio remodel and I gotta say, this is honestly one of the best videos I've ever seen. We'll definitely be checking out more of your videos in the future.

@gunnersmate623 3 жыл бұрын

Your video's are always fantastically informative and detailed with pros and cons. You have helped me immensely in ways of doing things with tools and wood. Please keep up the work...you are teaching many people many things. Gunner Out!

@TheHonestCarpenter 3 жыл бұрын

Thank you, Gunner! I always try to give it my best each time. I'll keep them coming. I appreciate the support!

@vincentwesolowski459 3 жыл бұрын

You hit the nail on the head with this one! I can’t believe all of the times I’ve used my multi tool for all kinds of projects and problems. An absolutely fantastic tool that belongs in everybody’s inventory.

@chrisgraham2904 2 жыл бұрын

They really are a "Problem Solver".

@Espo11B 2 ай бұрын

This saw held me repair a door jamb in my house. The hinges tore out of it and took a big chunk with it. I cut out the damaged section with my oscillating tool and glued and screwed in a solid wood patch. The door works great now. I followed your advice on how to cut straight with the saw and I was really impressed with how straight it was. Thank you. I've learned a lot from your videos.

@stephenconnell3645 3 жыл бұрын

Stumbled across your Channel, I've been a carpenter my whole life I am 62 years old. Refreshing to see a younger guy being very thorough with his information. You can tell when your 62 who knows what they're talkin about from experience good job an excellent description you covered all the bases

@LiesOfJoe 3 жыл бұрын

This devise and the impact drill are the most amazing innovations out there.

@richardzapor1983 2 жыл бұрын

As you say these are VERY handy for some applications . I have concluded after a year or so of professional use that it is worth it to just use the carbide toothed blades and save myself the grief of of having to change out a HSS blade that got dull quickly , unless you are cutting butter. Also dont waste your time trying to cut metal with these tools . Just get out the angle grinder with a cut off blade ! But they do pretty well on aluminum . But they just dont put much set in the teeth . But a cordless angle grinder with a nice thin cut off blade in it is as revolutionary as the oscillating tool . So many uses , and so quick and easy to use. But not for wood .

@johnironside1075 2 жыл бұрын

We just did a full, and I mean full, overhaul renovation of a house in Oshawa and the Dewalt 20V cordless oscillating tool was a miracle tool. We used it for cutting wood and drywall, to remove grout, sanding, cutting off nails, floor tile removal, you name it. It was my first time using it for more than experiments in the workshop, and I will never be without one. Be careful with the multipacks of blades on Amazon as they are mostly garbage. I eventually used only name-brand blades and found them at slightly higher but good prices.

@douglasvine2516 2 жыл бұрын

I agree that it's a Game Changer for repairs I do woodworking as a hobby and have all of the woodworking tools for making tables, desks, shelving etc.. I began doing several home repairs and remodeling lately and got an multi tool after watching a few of your videos. I didn't realize how much I needed it until I started using it. I just finished rebuilding my front porch and nothing was square or flat. I finally just roughly installed things like trim and then used the multi tool to flush cut everything to match then sanded it. I never would have been able to figure out all of the random angles. The project farm actually did a video on blades for the multi tool and I have been using the winner of the tests and they actually last nicely.

@bernardhvanengen5002 3 жыл бұрын

When I had to replace the rotten bottom parts of some boards in my barn doors I had to cut these boards in situ at 45 degrees. it came to my mind that a multitool would be ideal for this purpose. So I bought a Bosch that performed very well. Later i used it for sanding in tight corners and various other jobs.

@billwang4181 2 жыл бұрын

That's exactly the application I thought of when I saw the video. I have done this job with a hand back-cut saw. Very tedious!

@toen316 2 жыл бұрын

Love this saw!!! I had to do a small remodel of my basement. Water was getting in over the footer and had ruined a bunch of backer board (I think that's what it's called) on the wall. I snapped a line on the wall and did a series of plunge cuts to fix the whole wall along the baseboard. Love this thing!!!

@adamstephen5881 Жыл бұрын

I watched this and then bought one and used tonight. What in the world have I been doing without this. This just turned a difficult project into a super easy and fun one. I’m so happy these exist.

@guyward3928 2 жыл бұрын

I’ve been carrying my old Rockwell in my bag for about 10 years now. Won’t leave home without it. Just got a dewalt cordless. Love it.

@michaelmurphy4253 3 жыл бұрын

Nailed it! Start with Harbor Freight...as little as $20.00, wear out a couple of these 1st before you move to a more expensive tool. Well done.

@TheHonestCarpenter 3 жыл бұрын

Thanks Michael! I've got a harbor freight corded drill that cost $40 and has lasted 12 years. It just won't die!

@JeremyHansen 3 жыл бұрын

I started off with a Harbor Freight and eventually switched to the cordless DeWalt. Night and day difference between the tools, but without the Harbor Freight model, I don't know if I would've been willing to spend the money on the DeWalt.

@verlicht 3 жыл бұрын

Buy once cry once.

@larrypdx8939 3 жыл бұрын

Jeremy Hansen p

@Lost-mv6tg 3 жыл бұрын

I’ve been using the Ridgid cordless for years. It has changeable heads for even more versatility.

@ubernerrd 2 жыл бұрын

I bought an oscillating tool a few months ago and it is quickly becoming one of my favorite tools for the reasons you mentioned. When you need to make precision cuts it really is the best tool for the job.

@rickyt51 3 жыл бұрын

This is a life saver! Bought one recently for a remodel job and I love it!

@TheDaddytoybox 3 жыл бұрын

I like it so much that I own several. Never leave the shop without one!

@rockytucker7480 3 жыл бұрын

I've been in the field 5 years, it's a great tool must have. I've always called it an undercut saw, was the term my mentor used

@michaelandcolinspop 2 жыл бұрын

I’ve got the same DeWalt XR that you show and it’s an incredible tool. I’m renovating our master bathroom including a big tile job that required new drywall, and it made very quick work of both removing the old material and precisely cutting the new stuff without any re-cuts. The other great application I found for it was removing any dried excess mortar between and around tiles with an abrasive blade prior to grouting. Again, fast and easy for professional-looking results. Great, great tool.

@Stevej2013 3 жыл бұрын

I totally agree Ethan. I have a Dewalt one and use it the most out of my tools.

@HBSuccess 3 жыл бұрын

It’s true. There is a distinct line in the industry sand “before” and “after” oscillating tools. Greatest use IMO is under-cutting door jambs and trim legs for flooring

@jamiepatterson558 2 жыл бұрын

This has been my very favorite tool, beyond my impact driver, in my toolbox for years. You can't beat the versatility!

@michaelosmon 3 жыл бұрын

Hey man, using a small triangular file and going opposite direction for every next tooth you can resharpen these blades easily in a pinch.

@ScorpionRegent 2 жыл бұрын

Yeah, SeeJaneDrill did a good video on sharpening multitool blades. A Dremel, used with carefully, could do it in a flash.

@FrederickDunn 3 жыл бұрын

Absolutely excellent presentation! Thank you so much, I found the demonstrations to be very helpful.

@CheckThisOut77 6 ай бұрын

The multi tool is very useful. This guy shows it well. It chops nails, too.

@HotRod751717 2 жыл бұрын

Extremely well done video. I'll be using my multitool for the first time directly overhead to remove and replace a small section of water-damaged wood. Your mention of safety precautions was very clear and informative and I'll aim to do exactly as you instructed. Thanks very much!

@leif913 3 жыл бұрын

Love my multitool. Great for cutting rot out of door frames. I have the skill powercore 12. Compact and light, comparitively. Everyone should have a multitool. Great vid-always love your stuff. Hope your new career is working out.

@charliebozzo9948 3 жыл бұрын

Used in masonry restoration work. With a smooth blade, the oscillator is awesome for removing old chalk joints. The original German made Fein Tool was and maybe still is the best. Used to come with like 10' cord.

@stevegrabe9863 2 жыл бұрын

Excellent overview of the tool! I got a multi tool as a bonus when I bought my screw gun. I had no idea what to do with it till we had a flood. It was brilliant cutting at cutting out wet drywall. My neighbors all went out and bought ones to do their basement drywall repairs, too. Since then I’ve used it on a bunch of little cuts. Amazing device!

@pferoxtheskeeterguy 2 жыл бұрын

I've had my Harbor Freight tool for a few years now and use it on almost every project for sanding. Recently I got a 18v Ryobi one and took a wood blade smoothed down the bottom side, and use it to flush cut plugs for screws and other holes, with minimal or no damage to the piece. I also use it a lot when repairing various wood items, cut out the bad area and then glue in a filler piece.

@vrtreat 3 жыл бұрын

I bought 3x of these after seeing this used on the rotten trim videos! Having 3 means less tool switching. I keep 1x saw, 1x sander and 1x scraper or cutter blade and I LOVE THEM!!

@TheHonestCarpenter 3 жыл бұрын

I definitely still keep my old Bosch around for switchouts, Paul 😁 Thanks for watching!

@zoltantapai3716 3 жыл бұрын

One thing that was not mentioned is that especially with more budget blades you have to secure smaller workpieces so they don't just start vibrating with the blade. It happens way less with higher quality blades tough. Really good video. Please keep them coming.

@ganthore 2 жыл бұрын

I am a big DIY fan. As well as full time mechanic in the automotive world. NEVER heard of a power multitool before. Normally when I hear Multitool I think of pocket Gerber or some other such thing. Saw this dewalt multitool on sale at Home Depot..... game changer. Amazing what this little guy can do. Use it to cut bolts all the time.... and as long as the blade is not dull? Cuts through metal like butter. Hard to reach bolts / seized nuts / etc. Haven't used it on wood yet.... but if it handles metal easily, I know wood would be no problem. Love your review on this tool and agree... a deff must have.

@sheerpride 3 жыл бұрын

Great video. I wouldn’t be without my multi tool, but learned many of these lessons through my own mistakes. The issue of hearing protection is spot on as they are surprisingly loud.

@duanewolgast4165 3 жыл бұрын

Great with all of the pictures and video clips to illustrate your talking points.

@joshhammond1247 3 жыл бұрын

I love my angry bee hive (what it sounds like to me) So useful, really good for drywall removal.

@Belenus3080 3 жыл бұрын

Yeah our homeowner complained about the noise a couple times. About the only drawback

@NGHTRYDR2002 2 жыл бұрын

I absolutely LOVE my mutitools. Have a Makita corded and a Ridgid cordless 18v. I use them for EVERYTHING... Trimming, plunge cuts, drywall holes for electrical boxes, and even minor wood sculpting and precision sanding. Awesome tools that should be in any DIY'ers tool kit. They are inexpensive and have so many different blades and attachments they become one of the most valuable tools in the bag.

@shaolindreams 3 жыл бұрын

Badass tool. Great tool for in the garden too whether to sort out a tough root, branch, fix a broken fence, even repairing patio and pathway. Very versatile tool just to have... because there will always be a use for it.

@arthurmorgan8966 3 жыл бұрын

3:00 How my contractor cuts stuff when I’m not looking, too.

@youtubechannel12371 3 жыл бұрын

😂

@Britonbear 3 жыл бұрын

Had one for Christmas and even though I'm just doing a little DIY at the moment I've used it several times since. Really useful. BTW...I saw another KZfaqr 're-toothing' a blade with a file.

@christopherwilson2406 3 жыл бұрын

Yessss! It is actually easy to re-tool the teeth if you've got some decent skills. Just can't eat away too much material, but is easily doable. Side note: I sharpen my beat up router bits with a die grinder and have had good success for quick fixes and also use it to sharpen my cut off tool bits as well. ....but I'm a metal guy first so I'm used to doing crap like that.

@thedobroblues Жыл бұрын

Another thing I like about the tool is you can turn the blade 90 degrees if need be and it works the same. I did this on a 6' T&G vinyl flooring cut yesterday. The tool being parallel to the material helped me keep it more steady instead of being perpendicular like it is normally used. Great video!

@rondamon8004 2 жыл бұрын

Whoever invented this tool is a freaking genious....Period.!!!!

@jum5238 3 жыл бұрын

Great video! I found out about these about 2 years ago when I had a plumber do a complicated addition to my piping and extended into the garage for a workshop sink. He whipped this thing out and cut THIN lines in sheetrock in seconds to access the plumbing. I asked WHAT is that tool??? That was awesome! I ran out and bought one, and it sat around for awhile (I didn't have projects, really.. was just tool hoarding.) And then the projects came, and I keep it in VERY easy reach. I *WILL* say, that if you're trying to do a precise cut with a certain width, you need to be VERY careful. It vibrates out from side to side "invisibly" more than you think, so I recommend starting near the middle of your cut and working your way outwards towards the precision ends of the cut. He's absolutely right about going through blades quickly. I bring out the jigsaw only for curved cuts.

@TheHonestCarpenter 3 жыл бұрын

Good point, Ju M! You totally have to watch your perimeters. But I think this saw changed plumbing for the very reason you mention--quick access to get behind drywall. You can typically even keep the drywall plug if you notch it right!

@brodriguez11000 3 жыл бұрын

@@TheHonestCarpenter :There's also the cutout tool ( www.gearhungry.com/best-drywall-cutout-tool/ ) for doing some of the jobs a multitool would do.

@richardneff 3 жыл бұрын

Great video! I've used a couple (one corded and one cordless) for a while now. They're very useful for all the things in your video and more. However, you mentioned in the Cons section about safety. While ANY saw should be used with caution, one of the reasons this type of saw was developed was to cut off casts of patients with broken bones since skin is flexible enough to not be cut if the blade touches it lightly. It only cuts when there is resistance. As such, I think is probably a good 'starter' saw for those that don't have a lot of saw experience. Of course, it is STILL a saw and now with so many different types of blades being made, it still deserves respect! (Certainly don't drop it on your toes!)

@madarkaband9374 3 жыл бұрын

Probably the best innovation for carpenters since the screwgun.

@kevinmiller993 2 жыл бұрын

Just bought a dremel combo set and yes the oscillating tool is a total game changer...you will never go back to the old way.... love it... wow

@Shananana99 3 жыл бұрын

Love my multi tool! Less than $20 at Walmart. Cheap, but damn I use that thing soooo much just doing diy stuff around the house. From cutting wood to sanding it. Thanks for the tip about pre skimming the cut line, as it does want to jump around sometimes. It is super loud when used indoors, definitely need earplugs.

@johnbuchananart6932 3 жыл бұрын

I'm sold! Thanks for the tip! I want a multitool NOW!

@TheHonestCarpenter 3 жыл бұрын

Thanks, John! Pop it on the Christmas list! 😄

@olliecrow3547 3 жыл бұрын

They are a great tool!

@joetrevino2608 3 жыл бұрын

Thank you Honest Carpenter. I appreciate your professionalism in describing everyday tools. I like your upfront approach.

@TheHonestCarpenter 3 жыл бұрын

You’re welcome,Joe! Thanks for watching 🙂

@cdipierro 3 жыл бұрын

I first learned of the Multi Tool 15 years ago from my father-in-law who had the original Fein Tools piece. We were retrofitting his house with laminate flooring and used it to notch the trim so the floor boards would fit under. There could not be a more perfect tool to avoid prying off (some of which you surely would have to replace from inevitable damage), repainting, re-caulking hundreds of feet of trim. Huge time saver.

@evanhorton2520 3 жыл бұрын

My brother calls mine "your favorite tool", because I use it so much on our 140 yr old house.

@isaacjr1765 2 жыл бұрын

Damn that’s an old ass house

@kevinmiller993 2 жыл бұрын

@@isaacjr1765 True ... you do not want to be removing the old trim if you dont have to... take the plunge brother lol

@NguyenNguyen-xv8li 3 жыл бұрын

Hey I just wanted to let you know that the oscillating tool will not cut you. As in it won't cut through your skin because it is to soft. It's one of the reasons why they use it to remove casts off of people. In the anatomy classes they refer to it as the "bone saw" because it doesn't damage the tissues like a regular saw would when you're trying to separate body parts.

@MecanicaCallegera101 3 жыл бұрын

yep, your skin has too much jiggle to be affected by the oscillating tool lol. Anyone would know that.. especially when cutting a shim for instance that doesn't have enough bearing to stop it from shaking/moving. It simply won't cut. Although i'm sure this guy just said that to cover his own ass.

@Greyswyndir 3 жыл бұрын

I remember the original television adds when these tools came out for home use (many years ago, you had to order them by a 1-800 number) One of the selling points was that the blade wouldn't cut skin. I still don't completely trust that it won't cut skin, and I'm not willing to test it out. I'm sure there's some idiot on KZfaq or Tik-Tok that would be willing to demonstrate it for the rest of us. Even idiots have their uses.

@NguyenNguyen-xv8li 3 жыл бұрын

@@Greyswyndir My professor in my anatomy class demonstrated on himself when we were separating the legs and the arms from the torso. It's how they cut casts off of patients but drs like to call them instruments instead of tools lol

@Greyswyndir 3 жыл бұрын

@@NguyenNguyen-xv8li - Yeah, I've seen them used for removing casts, but that doesn't mean a blade designed with sharp teeth for cutting wood or soft metal won't cut you if you accidentally come in contact with the blade. I'm familiar with the theory behind why these oscillating tools won't cut into flesh, I just don't have any faith that the information is accurate. I'm sure it's accurate to some degree, but the blades they use in the hospital to remove casts are not as aggressive as the blades we use in home improvement. Apparently this tool has been around for some 70 years, but only recently (the last decade or two) made its way into the consumer market.

@wilcogrundens9086 3 жыл бұрын

Very dangerous comment. Sure, you can touch your skin with some of the short half circle blades, but there are longer fine cut wood blades that will rip right through your dermis. The longer the blade, the more action out at the end. Please be careful.

@Salatiso 3 жыл бұрын

My multitool has saved me a couple of times, beyond the cutting there's the sanding that can go to tricky places. Currently busy with my garage doors, my multitool has been a saviour! Your video made me appreciate it more, thank you.

@brodriguez11000 3 жыл бұрын

They shine with the specialty blades. From the blades that allow removal of calking and scraping up old paint, to the smaller blades that help with lock and hinge installation.

@victorglaviano 2 жыл бұрын

I always think of these as a "coroner's saw" or "morgue saw", can never shake the vision of a cadaver having its head opened with an oscillating saw and that buzzing sound!

@danboone5672 3 жыл бұрын

I’ve been a plumber for 25 years and have never used or seen a multi tool on a job site once. I didn’t even know what they were for lmao 😂

@erikvaldur3334 3 жыл бұрын

Never heard of?? I've had my fein multimaster for well over 20 years. Many years later feins' patent was up and everyone started making them. Ha, I've seen guys go through 3 or 4 of the cheaper ones and my old fein still stomps on any of them. The feins have gone through changes over the decades and I don't know if I'd buy a new one. The quick change function doesn't last very long. I don't think they have nubs anymore that keep the blade from slipping even if it loosens up a bit. Mine has the nubs and the old school Allen head screw that you have to use to change blades. It's not as convenient to change blades but it's absolutly bullet proof. Best 400 bucks I ever spent back in the 90s. It's the best tool for Carpenters since the cordless drill, IMHO. ( yes I was banging nails before cordless drills too)

@16v15 3 жыл бұрын

Likely he wasn't even out of diapers when the tool became popular. Kids today...

@PortersMob 3 жыл бұрын

Came to say something similar, like has he lived under a rock for the last 10 years? I could understand this video if Fein was still the only company making them, but literally every tool brand has a model now. Talk about click bait bullshit subject for a video. On the subject of people burning them up, I see it first hand that 99% of the time its the person operating it that causes the failure. Instead of letting the blade cut through the material, people tend to just ram the tool into the material as hard as they can overheating and burning up the motor.

@erikvaldur3334 3 жыл бұрын

@@PortersMob "can't you hear that" is what we always said to people pushing too hard and bogging down the motor of whatever saw they were using. Very good point. I always hated when someone used my mitre saw and started to cut as soon as they hit the trigger, not letting the saw get up to proper RPMs as well. Not only letting the blade do the work, not the saw save the life of your saw, it is so much safer for the operator. Especially pushing into a table saw.

@PortersMob 3 жыл бұрын

@@erikvaldur3334 you just gave me flashbacks to when I was in a production facility and one of the cut stations had to get a new/rebuilt saw every 6-8 months. Because every guy that used that saw would treat it like a guillotine instead of a saw, slamming the blade down through the 2xwhatever while puling the trigger right as the blade touched the wood.

@blakehardy7105 Жыл бұрын

Wire tech here. I use this to cut through small branches at ground level to get my ladder on a pole as well as cutting drywall for jacks. I love this tool.

@flpdragonslayersmith8 Жыл бұрын

I remember seeing the first one of these on an infomercial 20 yrs or more ago and me and pops and everyone said that thing won't be worth crap. Fast-forward to two yrs ago and I used one for the first time and omg, these things work on everything for every application. Door jambs for doors, drywall, you name it I've used it for it.

@libertyman3729 3 жыл бұрын

See Jane drill has a demonstration on how to resharpen those blades. Don't throw them away.

@theropesofrenovation9352 3 жыл бұрын

I was just about to post that and I saw it here. lol

@smellysam 3 жыл бұрын

Get the 60deg toothed blades, not as good as the Japanese style teeth when new, but can be sharpened fast with a triangular file.

@sophiescyclingandwalkingch4294 3 жыл бұрын

I’ve seen that and I’ll try it.

@gregdunda8425 3 жыл бұрын

Resharpen the blades with a Sharp Pog

@theropesofrenovation9352 3 жыл бұрын

@@gregdunda8425 What's a pog

@stephensiler3854 3 жыл бұрын

I resharpen my wood blades with a small triangular file

@kevinmiller993 2 жыл бұрын

Yes I just learned to do that . If done correctly it works great and saves you a lot of money if you are using it as much as I do... thanks for postings that info.

@rondamon8004 2 жыл бұрын

Me too and they work flawlessly...like a new one or even better...!!!!

@omaraljaderi2513 3 жыл бұрын

Thank you. This multitool is a day saver and I used it on a daily bases.

@5.56Media 2 жыл бұрын

Just got my LEILUO 24 pc. Multitool Blade Pack. Thanks for the suggestion!

@JackKirbyFan 3 жыл бұрын

I love this tool and have had it for years -- but I never thought about using it for some of the uses you use. This is my go-to for surface cuts like wood plugs. Thanks and you are right -- the blades are awful. They dull SO quickly.

@TheHonestCarpenter 3 жыл бұрын

Thanks Dave! Yep, perfect for flush cuts on plugs and such.

@frednewlin1459 3 жыл бұрын

I get my blades on Amazon for like $25 for 20 blades are so awesome deal.The brand starts with a V and ends with a T. They’re so expensive at the box stores.

@1stinlastout165 3 жыл бұрын

Put your old blades in a vice file a straight edge them use a diamond file to reshapen , doesn't take long to do but it extends the life of a blade!

@chrisgraham2904 2 жыл бұрын

The blades can be easily sharpened multiple times. You can buy premium blades advertised to last much longer. You can also buy the Chinese bulk blades from Amazon and others and get 25 blades for the price of one. They are cheap, with a short life, but you've got 25 of them.

@jamesshamburger5435 3 жыл бұрын

I’ve found myself using it almost as much as my impact driver

@davidpetersen6694 2 жыл бұрын

Thanks for this great video. I am getting one today to make plunge cuts in my 105 wood siding on our historic home. I Was using a circular saw and dreading the project until watching your video. Since I have literally 10 to 20 plumage cuts per side of house, I will be getting that Dewalt you showed. I am actually excited at how precise these machines can be. It will save me literally days of work on this major project. What a game changer!

@mattappleton3399 3 жыл бұрын

I do remodeling for work and I second this notion.

@curtisclark13 3 жыл бұрын

Embarrassingly I’ll admit to just starting to use the multi tool about two years ago. I’m still in that stage where I’m about to do something the old way and I suddenly remember...”oh yeah, the zipper” can’t imagine a job without it.