The Biggest Vintage Chainsaw Haul Yet - McCulloch 1-70, 610, Super 33 - Pioneer 1200

The Biggest Vintage Chainsaw Haul Yet - McCulloch 1-70, 610, Super 33 - Pioneer 1200 - Homelite C-51

Рет қаралды 1,201

3 ай бұрын

I tried, I really did try to suppress my “need” for more more chainsaws. I was able to control myself for a short period of time and then I was back to rescuing vintage chainsaws from the dump. I really need to stop after this haul. At least until the end of the year. I have a lot going on and I’m starting to have more non-runners than runners in the shop. The script needs to flip for me. I don’t collect my saws to look at them, I run them!
This is the biggest bunch of saws that I’ve brought into the shop. Most of them have issues that will need to be sorted out, but nothing I can’t handle. There are some big, old school muscle saws in this bunch, some small saws too. I’m happy to add them all to the collection.
I hope you enjoy the video, thanks for watching!
If you learned something or were possibly entertained, please consider subscribing, sharing the video, or maybe giving me a like. It all helps, and I sure would appreciate it!
McCulloch 10-10, McCulloch Pro Mac 610, McCulloch 3516, Homelite XL-101, Homelite XL2, Homelite Zip, Poulan 295 Pro
- Lucas Semi-Synthetic 2-Cycle Oil
- Oregon Bars
- Oregon Chain

Пікірлер: 45

@flyinbrianz22 2 ай бұрын

Damn.....I thought I was the only fool who collected old saws. It all started when my dad passed away and as a tribute to him I got his old Montgomery Ward saw running. Turned out to be a McCulloch 610. I now have 2 610's, a 650. Then I got hooked on those little Homelites. I have 3 XL2's and an XL. Recently I picked up a Super XL12 that I will restore. Thanks for the vid!

@EightWheelsRollin 2 ай бұрын

Ha ha ha, it's a sickness for sure. You have some nice saws. That Montgomery Ward (610), solid runner. The 650 is a ripper! All the saws you mentioned, I have in my collection as well. The McCulloch 600 series being some of my favorites. All the best!

@oldbowsaw9001 3 ай бұрын

Nice haul. I collect,repair and love to cut wood with my vintage saws. Old cat mechanic--Albany Georgia--south west Ga. Keep the videos coming!!!!!!!!!!!!!

@EightWheelsRollin 3 ай бұрын

Thanks! Talk shop, repair and runs saws, you and I would get along just fine! Lucky you working for Cat. My brother-in-law is a diesel mechanic for the local fire department. With the lot of saws I just got, I should have no shortage of chainsaw videos for you!

@markhigby4034 3 ай бұрын

Don't feel bad about the saw addiction,I have the same problem,cant ever have enough,always looking for more,,love the vintage saws

@EightWheelsRollin 3 ай бұрын

Yes Sir! We definitely have the same sickness. Vintage chainsaw grab hold of you...they just do.

@xl130homelite3 3 ай бұрын

1-70 and XL-101 for the win!

@EightWheelsRollin 3 ай бұрын

I agree, two great saws! The XL-101 is almost new. The 1-70, well it's a 1-70, ha. Thanks!

@xoriatmike6857 3 ай бұрын

The 295 Poulan is probably one of my favorite budget truck saws/sectioning firewood saws. I got one in a package deal a month or two ago. I had one with the funky ez-tensioner on the cover and swapped it out for a different clutch cover and adjustable bar like you have. They work great on the cheap and if i hurt it making firewood its no big loss to me. Unlike my older homelites i don't mind it getting beat up or letting a relative learn to use a saw with it. Awesome haul though! And the 3516 and similar models have nostalgia for me as my father used one for years and years and the saw cut way above its weight. Made good firewood for the average homeowner.

@EightWheelsRollin 3 ай бұрын

I've never run a 295. It sounds like it has been a good runner for you. The bar and chain tensioner is not something I've seen before. If you swapped out a bar and clutch cover for it, it must work well. Your 3516 story is similar to mine. My Dad had a Pro-Mac 510 growing up. Good stuff!

@460V8 3 ай бұрын

Nice haul. Love the super 33 and 1-70 👌🏻

@EightWheelsRollin 3 ай бұрын

Thanks! I'm right there with you, big old school muscle!

@MAKESHIFTFARMs 3 ай бұрын

Cool! I’d like to have a Homie XL-101 in my collection like you got.

@EightWheelsRollin 3 ай бұрын

Thanks! That XL-101 is one of the nicer saws in my collection for sure. I lucked out on that one!

@McCullochMac6 3 ай бұрын

Them homelites are nice...

@EightWheelsRollin 3 ай бұрын

Thanks! I lucked out, all of them are in great condition. I need to get them in the wood!

@mrobsoletesvintagehomestea9156 3 ай бұрын

Wow, that is quite a haul , and quite diverse to boot ! I wonder if the guy that had the 10-10 wanted to get rid of the saw because it wouldn't cut. The chain is on backwards. HA HA ! Looks like you will be busy for quite awhile.

@EightWheelsRollin 3 ай бұрын

I thought the very same thing when filming the video, what an assorted bunch of saws. If there was anyone who would notice the backwards chain, it would be you, ha! An eye for detail, good catch! I do have my work cut out for me with this lot of saws, that's for sure. I'm looking forward to getting this herd running, some big old school muscle saws just begging to get back in the wood! Thanks for stopping by and for the comment!

@mrobsoletesvintagehomestea9156 3 ай бұрын

Work and play using the same piece of vintage equipment at the same time is tough to beat ! Old saws are a great hobby.@@EightWheelsRollin

@EightWheelsRollin 3 ай бұрын

So true! I'm lovin' every minute of it!

@mrobsoletesvintagehomestea9156 3 ай бұрын

The big Mac 1-70 most likely has a McCulloch carb on it, and the only place that has kits is Sugar Creek Supply. They have repro kits for a number of obsolete carbs, and have an excellent selection of decals also. If you are lucky and it had the carb upgrade to a Tillotson HL , the saw will be a lot easier to start and run. The little Mac is based on the Italian McCulloch designs FYI.@@EightWheelsRollin

@EightWheelsRollin 3 ай бұрын

I did check the 1-70, lucky for me it has the Tillotson HL carb. Thanks for turning me on to Sugar Creek Supply. I'm not sure about the 1-70, but Super 33 is going to need a carb kit for sure. I just picked up another Super 33 today. Between the two, I'm hoping to have at least one good runner. I don't know much about the little 3516. I've watched a few videos of people running them and rebuilding them. I'll have to dive into it at some point. Are they a good saw or are they a "Mr. Poo"?

@thecollectoronthecorner7061 3 ай бұрын

Lots of desirable saw's in this video. We drove 425 miles one way just to buy one saw

@EightWheelsRollin 3 ай бұрын

Thanks! I lucked out with this haul. Wow, a 12 hour road trip for one saw. What saw?

@ericfuller6326 3 ай бұрын

Chains on the correct way on the mac at least.

@EightWheelsRollin 3 ай бұрын

Ha! Yeah, I think the guy that sold me the 10-10 might have had a hard time cutting with it.

@Vizslarunner99 19 күн бұрын

Nice ! I’m jealous it looks like you have the pintail chain on that 33.. I totally restored one but have never found an original pintail for it. If you have an extra 1/2” pintail chain I might have some stuff that’ll help you complete yours I’d trade for. I know I have a chain cover and possibly one emblem and other odds & ends

@EightWheelsRollin 17 күн бұрын

I would love to see your restored 33! I have two Super 33's. I picked one up along with an older Pioneer 1200 a while back. The guy I got the saws from also gave me a box of rusted chain and a couple bars. I haven't had an opportunity to go through the box, so I'm not sure what saw the chain goes to. To top it off, I just moved and have no idea where the box is...ha ha. When I get settled, I'll take a look. Hit me up in a few months. That 1/2" pintail chain is hard to find.

@Vizslarunner99 16 күн бұрын

@@EightWheelsRollin don’t mind me reving the hell out of it 😂. I had been tuning on the carb trying to get some top end. I have better still photos of it, the bar came out nice too you can kinda see it in the background. kzfaq.infoLXcjs1JvEXo?feature=shared

@EightWheelsRollin 11 күн бұрын

Duuuude! That thing is C-H-E-R-R-Y. Great job Man! What paint did you use for the black, it looks OEM. I like the wrap on the handlebar too. She sounds great by the way! How was it working on the carb?

@Vizslarunner99 10 күн бұрын

@@EightWheelsRollin Thank you! after failed attempts with various hammer/wrinkle paints i ended up using “VHT wrinkle plus” it has a picture of valve covers on the can, and it says it’s rated to 350 degrees which is a nice bonus. The carb wasn’t bad sugar creek supply had a diaphragm and filter and there is a good video on KZfaq on the process. (I replied earlier but it didn’t show up, this might be a duplicate.)

@EightWheelsRollin 10 күн бұрын

Thanks for the info, I really appreciate it. That paint is unreal! I'll keep you posted on the chain...

@rexbaker5866 Ай бұрын

The chainsaw on the 1010 is on wrong way

@EightWheelsRollin Ай бұрын

Yeah, the guy I got it from must have had a hard time cutting with it.

@Jerry-ju7jy 3 ай бұрын

Will u sell one of them

@EightWheelsRollin 3 ай бұрын

I don't normally sell my saws. What saws interest you and where are you located?

@McCullochMac6 3 ай бұрын

the Mac 3516 needs gas lines...

@EightWheelsRollin 3 ай бұрын

It probably does. Maybe a fuel filter and carb kit as well. I need to figure out that purge bulb too.

@McCullochMac6 3 ай бұрын

Bulb comes in kit with lines

@EightWheelsRollin 3 ай бұрын

Good to know. Thanks.

@paulhooker516 3 ай бұрын

My favorite is the McCullough 610 grew up with one. I'm 45 just cut a load of oak with it. Of course I have 4 more that run. And two 700 pro macs. The Husqvarna 550 rancher sits on the shelf most days. 😅

@EightWheelsRollin 3 ай бұрын

Ha ha, I wouldn't argue with you. The 610 is one of my favorites, just solid saws. The 700 is a fantastic saw too! I'm a Mac guy first, followed closely by Stihl and a Homelite chaser....never owned a Husky. Not that they are bad saws, but just like you, I really like my Macs!