The night vision market is like the PC market, the technology to make the actual intensifier tubes is like the technology to make CPUs. There are tons of companies making PCs, but at the end of the day it's basically just two companies making the really important components. likewise there are tons of companies selling and assembling night vision devices, but not very many companies making intensifier tubes.

@@Hoplopfheil thanks, that makes sense

@@Hoplopfheil well put.

@@Hoplopfheil digital nightvision then. I'll have the X27 headmounted someday. lol

@@julian23561 digital still has a ways to go. It’s plenty for hogs though

The duality of man

If you didn’t love him when he was down. You don’t deserve him when he’s up.

@@lgbtqisahategroup9781 I liked him better reviewing cheap guns. But then, I’m an impoverished college student.

@@KebeQ reject the duality of man, embrace the duality of toob for ultimate night supremacy

@@lgbtqisahategroup9781 that’s the new viagra slogan

If you dial the focus all the way out, you can see Azatoth for a split second before you completely lose your sanity.

@@HoplopfheilHail lovecraft

@@Hoplopfheilbeen there, done that! I be slipping through unknown geometries into the voids baby!

Dude, night vision takes your LARP game to a whole new level.

@@deangullberry5148 😂😂😂

Thinking about getting one to fuck around when camping

@@deangullberry5148 As a seasoned LARPer who uses $6,700 ATN PS15s at airsoft milsim events, can confirm

More uses to one than what your thinking. Get one in your possession and yould use it more than yould think for a few different reasons

Bravo Six, Going Dark

Bravo Six, going broke

FUCK

I thought so too until I saw through the dimensions and lost 10 sanity points.

Thank you for sharing.

same

@@Hoplopfheilno

@@Hoplopfheil hope it was a successful BIP

@@bradsmgads1302 BIP?

bruh

So are you still happy so far ? Would you recommand it ?

@@scorpio2921 Yah im still happy with them, obviously if I had the money I’d get some more “tacticool/gucci” ones but for what they I don’t mind them.

@@DayNoodler Okay thank ! Yea i can have Agm gor 6K, and DTNVS for 10K, so kind of big difference here ^^

These are made in vietnam?

It would be fun to play with but I probably won't seek it out on my own.

@@Hoplopfheil I have a PNV57e, I've used pvs 14's, 7's, and gen 3 5's or 15's can't remember. It's equal to a gen 2 in quality but dim, it's alot easier on the eyes and does not give a headache over long usage time.

Hey mate is there actually still old Soviet night vision ?

@@lance8971 Check Varusteleka

Where exactly in Poland do you buy it?

I would like to know how your mum14as is? I have 2 same model as yours and they are completely different tubes. One seems to have a ton of noise and darker tube that makes difficult to see sometimes and the other is really bright and crystal clear. I don't get it, how there seems to be that big of a difference between them. Im interested in knowing which one is normal?

...Everything looks the same... no wait. It's a little nicer.

I know nothing about night vision, but I'm guessing the goggles are probably significantly more expensive. I don't really know though.

The duals are easier on the eye, and for your brain to process what you are seeing. The PVS-14 is obviously lighter, and technically it means if you go without it one eye is already naturally adjusted. Typically speaking, the duals are always better, even with the extra weight, for night vision use. That being said, the 14 is better in terms of weight and, obviously, cost savings. So if you're not under NV as much, the 14 is fine. Imo you won't really notice much of a difference after getting used to the 14, unless you use NV for long periods of time. That's what I've gathered from listening to others. Take it with a grain of salt, I've never owned any myself, at least not yet. Someone like Hop will have a much better opinion for you, and they know far more than my second hand "knowledge" can ever provide.

Bye

@@Hoplopfheil you know you want them Tight, small, caressing, short....just like how Biden likes kids.

@@Hoplopfheil good answer.🤦🏻‍♂️

Has to be at least a couple km, many militaries uses them for long range engagements. But i have no clue just guessing

Mod armory j arm

First world problems.

GPNVG-18?? I'm sticking to my creative XP glass condor monocular.

What did u buy ? Any recommendations ?

@@scorpio2921 DTNVS, lightweight, l3 is the best. I like the AGMs because you can get a 51 degree FOB but quality and weight isn’t as good as DTNVS

@@thegolflife7565 And the fact that dtnvs have not autogain is not a big issue when using it ? But i’m european so i can’t have gen3 haha

I don't think there's any reason to buy a PVS-7

@@Hoplopfheil Ok then I have 2200 - 3000 ish to spend, tell me what to buy, I have a TW exfil ballistic for reference.

@@Nowhere4u2run shop around for a pvs 14,

Pvs-7 are too wide for anyone to use

@@Nowhere4u2run XLS Pvs14 from JRH

I gotta buy some first.

A good gen 3 mono is around 4,500-5,000 a good gen 3 bino is another 3-4 grand

Binoculars actually don't really give you depth perception. This is one of those big myths in the night vision community, because the fact is beyond your arm length, you actually only need one eye to perceive depth. Even the cues from two eye depth perception involve the angle of the eyes FOV interception. Since bino systems are collimated and not tracked to the eye, this clue actually doesn't exist when using night vision. It is all placebo. (Here is an easy test. Close one eye and look at two non-overlapping objects. Can you tell which object is closer? If yes then you have depth perception with one eye) What binoculars do give you is less noise (Static on the screen) because your brain blends both images to ignore the noise. This produces a clearer image which can lead to less eyestrain. The benefits of a binocular system are fairly minor as you suspect. However for people who are depending on their lives, several thousands of dollars here or there isn't a big issue. For sure, you absolutely can get by with a monocular. It is going to be really hard (not impossible) for someone without night vision to fight someone with it, but between one guy with a monocular and one guy with quad tubes, the difference in equipment isn't a major factor in the outcome, at that point the tactics matter far more. Milsim airsoft events are brutal in hammering home this point, as you will often have guys with only a gen 2 monocular (or even just a PVS-7) he bought a decade ago, but used constantly during that decade ripping apart people running binoculars, who are "new money" and haven't used them often enough to realize their limitations.

Hey I just bought these, what mounting option did you end up using?

Also spend 25 bucks and buy the sacrificial lens and demist lense. Trust me

Mod armory- get there bayonet style wolf 14 adapter. Then get a good rhino mount. I would suggest rhino 2 since you have more adjustments. Don’t buy the optics planet mount it sucks and is way expensive. It makes the 14 poke in to your eye.

@ Chris- did you see what I said to you?

But does that AGM spec sheet specify information like signal-to-noise ratio, lines per millimeter, and FOM?

There awesome dude,bro is a little jaded cause hes used big names too long lol,get a modarmy flir j arm and thank me later that thing is insanly badass check them out

@@lock7852 ended up snatching a L3 pvs18 for 1300

That would be fun but I'm not going to go out and buy one.

@@Hoplopfheil I understand. Im considiring buying one (i live in Norway), the PVS 14 is silly expensvie up here, because of 30% VAT. Do you know anothing about the PN21K? I cant find much info about it, but i undertand that the Russian military uses it. Do you know? BTW, your channel is excellent! Hope it grows!

Just a tip buy the intensifier tube separately, its easy enough to install with maybe 1 screwdriver and can make a $1,500 PVS-14 into a $700 one if you can get a used PVS parts kit for a good price. Just do more research, if you have I'm sure you know that already but its gonna save me a lot of money

Does it require an IR illuminator to see like all Gen 1 nods on the market?

@z r well depending on the ambient light, if I enter my windowless bathroom at home, a complete darkness, I'd have to use the built in ir illuminator. With urban environment with tons of street lights I think it work. But then there's always your weapon mounted ir light, which helps quite a bit.

@@Nontacticalboy I appreciate the response. Bouncing around on different models right now. Budget is tight for something that works, but hopefully can be applied in the right environments.

@z r well it works 100%, especially with ir illuminator. But then I'm only using it as a "toy" in the range. Real world application I wouldn't know.

@@Nontacticalboy I probably wouldn't use it under real world applications.

We have these too,including NVG,Rifle scope,Flashlights,Red dot sight,Helmet,Various brackets and more

Why in days? Both You're eyes should see better than a single pvs 14 in daylight. 🤣

@@marinesniperzzz I don't see what is so funny. 🤷‍♂️ Did you think for a minute that maybe momentary I can't afford both, a good night vision and a good monoocular or binoculars ? And I want to use the night vision's zoom during the day as a compromise, for a while until I can buy some classic good optics for daytime.

@@CRIS.V1891 no I just think you're being funny

@@Artix902 Ok maybe I'm funny or maybe I'm not, you will never know for sure. 😉😁

So I can shoot with it

@@Hoplopfheil same reason why we wore them on our non dom eye. Keep both eyes open and the NV transposed over the other eye. Weird. To each their own. Also; doesn't the thing over your dom eye get in the way of your optics/irons? Or do you just rock a laser with NV? We weren't really using lasers in my day. The enemy had NV too and a laser would give us away

@@horrorclose9462 IR laser or passive through a red dot. I've tried shooting the way you described and found it nearly impossible.

@@Hoplopfheil fair 'nuff

I do the same as you. In the end it doesn't matter since one should learn to shoot from both shoulders. You will run into the same advantages and disadvantages no matter which eye it is over, unless you actually take the time to swing it over to the other eye.

For stargazing where you need to be able to see detail, and especially for actual use against humans, you need to go to gen 3. There is no alternative justifying the cost savings. Autgating on gen 3 alone is important for security purposes as with a gen 2 as you can see in the video above, just shining a light would blind you while with an autogated unit you can still see the person's outline. Everyone has 1000+ lumen flashlights these days with 25k cd and up so it is a realistic issue to concern yourself with. I would wait on the purchace as right now there is a shortage in night vision so gen 3 units are significantly inflated by ~$500 or more. If you need something now for security/hunting, buy a FLIR scout TK thermal handheld which is ~$500. This will be sufficient to allow you to pinpoint what you need to focus your attention on and you can then use a weapon mounted light to ID once you have a good position.

@@DaveSmith-cp5kj I've been waiting 8 to 10 yrs on price to go down thinking the newest breakthrough color digital might drive down$ but not a chance. I have missed a few good deals on ebay but seems sketchy with that amount of $

@@DaveSmith-cp5kj but yeah gen 3 before it gets regulated

@@robertzack1635 I get you, I felt the same way. IIT is not going to go down until SWIR starts grabbing hold in military usage (SWIR makes IR IIT obsolete, but currently they are not light or power efficient enough to be of use). I wouldn't be afraid of buying on ebay. If you see a good deal, worst case senario you paid for parts to contribute to future upgrades. Personally most of my NVD come from ebay and I've never had anyone scam me. This Chirstmas I picked up 2 Gen 3 autogated monoculars from Superior Tactical's ebay account. They were absolutely flawless despite being labled as blems. I paid 2,000 each, and since it coincided with ebay bucks, I got $200 back which I used to buy some Rihno II and two ballistic helmets also from Ebay. Currently on loan to guys in our group working on the illegal alien situation. Last month we got info while they were using that kit that lead to a sizable bust so we may even collect a few hundred dollar bounty from our local LE department (payout is usually slow though, as they don't pay until a conviction so it can sometimes be as late as 3 years after the fact).

@@DaveSmith-cp5kj superior tac was the place I almost bought from i remember cause I searched for them on Google and all to confirm they were real . I'm out on a ranch in ca not a whole lot of extra $ . But thanks , and stay safe out there

Steele Industries, JRH.

I personally would say try to find two milspec pvs-14 gen 3 for $2-2.5k with green and bridge them. The ability to split tubes is a big advantage over being stuck with bino or nothing. The big example is sharing night vision with a friend (a competent one). Regardless if you are buying for hunting, airsoft, or milita stuff, two guys with monoculars bring much greater awareness than one guy even with quad tubes. That's just how it is. The weight savings of a dedicated bino is a luxury, not a need. However if you are stuck between the two, I absolutely would go with the NVG-50. Dual tubes even if low quality will have a better image than a good quality single tube, as the noise is eliminated when your eyes blend the two images together. White phosphor is extremely overrated. It is not worth paying the price unless you are buying for looks not pragmatics. Even if you just like the white phosphor look, you can simulate it awfully well just by using a blue filter on your ocular lens.

@@DaveSmith-cp5kj this was great info. I’m looking to make the dive into buying night vision. The only question I had from what you said is the price for milspec Pvs-14. Agm pvs-14 3al3 are the cheapest gen 3’s I can find at $2500 and Is having auto gate a big deal?

@@jpk9171jpk The AGM 3AL3 is autogated. For the most part all gen 3 tubes you will come across are autogated as that is the standard tech these days. Autogating protects the tube and improves visibility in high contrast situations. The protection of the tube isn't a huge deal unless you care about crystal clear image (such as what pilots want) or you are using NVD every week or more frequently. Many people have old PVS7 with a Gen 2 non-autogated and they only have minor blemishes even after exposure to white light. Most people don't use night vision enough to see the benefits of tube lifespan protection, and if you do use night vision that frequently, enough time has passed that you can often afford to replace old tubes when they start to develop significant defects. What autogating really benefits in is the ability to see past the glare of a flashlight. If someone shines a 1000 lumen light at you at close range, you will just see a bright spot either way, but at a slight distance or against less powerful lights, the light becomes reduced in size which allows you to see more around the light. This is important only if you are using night vision against humans such as in airsoft, or serious functions, where being blinded even for a moment eliminates your advantage. My personal opinion is that unless you are buying a complete NVD for less than $1,000-1,500 (most PVS7 can be obtained for less than $1000) you should only buy a gen 3 tube if it is autogated. If you buy gen 3, you care about performance, and autogating is an aid to that performance under all lighting conditions. Autogating should not cost anymore than other gen 3 tubes because AFAIK, all current production gen 3 tubes are autogated by default. Aside from autogating, also ensure the device you buy has manual gain control, which that one does. Auto gain is not autogating, and auto gain is not desirable as you can't lower brightness to help preserve natural night vision or reduce eye splash, and you can't increase brightness to counter the light loss reduction when using ocular filters.

@@jpk9171jpk Oh since you also are a new buyer, I suggest buying a surplus ballistic helmet from ebay for ~$50 (typically the NVD shroud is included), buying a padding upgrade kit, and buying a Rhino II (~$75 used) and J arm for monocular ($15-25), or a bridge (~100 for chinese, 500 for real) mount. If you upgrade to dovetail (not needed in most cases as most bridges have a horn or dovetail adapter) Mod Armory sells a PYRM which converts the rhino horn interface into accepting a dovetail.

@@DaveSmith-cp5kj so I did already buy a team Wendy bump. I shoot left handed so I had to go with one that I could get a clip on the right side.

Hi

Digital night vision isn't night vision.

@@Hoplopfheil How so? It offers similar abilities that the average $1000 set of pvs14's, usually at around half the cost. I've been using the same nvg10 setup for the past 4 years, and not once have I had any issues with it.

Loosen the sling a bit

Skull crusher and jarm

We have these too,including NVG,Rifle scope,Flashlights,Red dot sight,Helmet,Various brackets and more

If you're referring to that Cabela's Mossy Oak hoodie, I bought it for like $8 on clearance years ago, I don't think they still exist.

HEFT