The E36 Get Some SICK Vintage HRE 525 Wheels!

Рет қаралды 46,071

Күн бұрын

I've been waiting for this for longer than I can even put into words...
If you want to support the StanceWorks channel and builds, here's the link to the patreon!
/ stanceworks
Be sure to follow StanceWorks on Instagram: @StanceWorks
Follow me personally on Instagram at @mike_stanceworks
Be sure to support our friends at H&R Springs for helping bring this Honda-swapped Ferrari project to life:
www.hrsprings.com
Last but not least, check out the rest of the gang that helps to make this project happen:
www.turtlewax.com
www.nittotire.com
www.rsfuture.com
www.haltech.com
www.garrettmotion.com
www.turbosmart.com
www.vibrantperformance.com
www.rywire.com
Timecodes:
00:00 - Intro
00:27 - New Wheels, Finally! But Let's Finish the Suspension.
01:30 - Up First: Control Arms and Bearings
02:34 - Brett's Arbor Press... To the Rescue!
03:25 - E36 FCAB Installation Process
04:41 - E36 Front Control Arm Bearing Differences.... 1995
05:15 - Porsche 996 BBK for E36s
07:18 - Installing the H&R Coilovers
08:00 - Spring Preload Isn't Real!
09:52 - Wheels!
10:36 - Nitto NT01 Tires
11:46 - The HRE 525s: Installed
12:43 - What's Next?
14:06 - Outro

Пікірлер: 175

@alexbliss5927 2 жыл бұрын

TOT on tv in the background. If the new wheels weren’t a clue, you’re a man of class 🤌

@Sf_Mason 2 жыл бұрын

Porsche Boxster 986 3.2 calipers are usually the go to, I've done the front end ones and honesly it's a better upgrade over the stock M3 setup. Creation Design do the caliper mounts that'll allow for straight bolt in, though for 17inch wheels, you'll need to have 12mm shaved off the mounting pad on the calipers if i recall. HEL do braided lines for this conversion. Pad choice is free, but you've got a lot to choose from. Personally i run DS2500 from Ferrodo all round with ATE TYP200 fluid. this works very well on the road, and has stood up to sub ten min laps at the Nurburgring (PB is a 9.42 BTG here).

@irwindigital 2 жыл бұрын

This Old Tony on in the background. Impeccable taste in cars and KZfaq channels.

@Doggepp 2 жыл бұрын

Something to keep in mind if you're looking at bushings for your M3. If you have a facelift M3 96> You're not supposed to run offset lollipop bushings. The spindles and arms already have more caster, and if you run offset bushings you can easily get into clearance issues. Info in the video is correct, pre facelift you can get away with offset bushings.

@fredrikrapp 2 жыл бұрын

That's correct. But you can also use of set bushings for standard e36 arms, giving more (better) caster just as the pre face lift m3.

@Doggepp 2 жыл бұрын

@@fredrikrapp Yeah I am not a 100% sure - All I know is I cant run caster-lollipop bushes on my car, because my wheel setup will hit the front of the fender/bumper. I run 235/45 profile, and full Millway setup

@okboomer1340 2 жыл бұрын

This bed music is so cool you could film a kitchen aid dishwasher build and it would be captivating.

@duncanmartin2626 2 жыл бұрын

Those wheels are amazing. They remind me of the Merc 190 Cosworth wheels for some reason, so seeing them on the E36 is a bit strange in some shots where you zoom out, but they work beautifully.

@StoicaVladIoan 2 жыл бұрын

That means you don't know what wheels this car had back in the day lol

@PeenMcTuggins 2 жыл бұрын

yeah the wheels + the wing give me cosworth vibes as well

@Kennyjamesss 2 жыл бұрын

Man thank you for being a KZfaqr that actually uses quality products on their build, I’m so sick of seeing all these dudes use garbage simply because it’s ✨FREE✨

@ds98136 2 жыл бұрын

Wheels look great. Spring preload of a linear spring makes no difference during compression/bump but during rebound preload does change the extension force. The shock’s rebound damping curve would need to be adjusted for spring preload. Oh and thank you for keeping the chrome kidneys.

@woznaldo 2 жыл бұрын

Correct. You do not change the spring rate with preload.

@daedalus_20v 2 жыл бұрын

I've got a set of 525's on my '94 S4... one of my favorite wheel styles of all time - simple, purposeful, sporty 90's touring car vibes. As expected, they look fantastic on the E36 as well.

@BrainsofFrank 2 жыл бұрын

Rims are amazing!! The entire E36 looks soooo sweet!! I am so glad to see this bmw being given a lot of love so it can drive again. Excellent job Mike

@TheSneakylemur 2 жыл бұрын

Christmas came early! You nailed it with those wheels. I’m really enjoying this series. Thanks Mike

@TUERLATERRE 2 жыл бұрын

I love how your videos are shot.. great quality.. and theres the cars 🤩

@j.d.8593 2 жыл бұрын

Those wheels are a match made in heaven! Perfect choice and perfect color combo! Can't wait to see it all complete!

@scrubscriber4911 2 жыл бұрын

Merry Christmas Mike! Great wheels, and top stance.

@jdwxly 2 жыл бұрын

Excellent choice on the wheels! Nothing like a good set of five spokes and those HRE's look amazing.

@Wayne_Nero 2 жыл бұрын

Wow nice job, I think that Stance really Works for that car!! Merry Christmas 🎄

@benzina5917 2 жыл бұрын

Hard to argue with a set of period HRE wheels. Excellent choice and Merry Christmas to the whole StanceWorks family :)

@ssoffshore5111 2 жыл бұрын

Looks great! Happy holidays!!!

@jasondunn8894 2 жыл бұрын

I see you’re a fan of This Ol Tony! Thanks for the great content. Merry Christmas.

@Weissenschenkel 2 жыл бұрын

Love the wheels, man! What a sick visual! I'm curious to see the new calipers, tho. Happy holidays!

@Rosten 2 жыл бұрын

THANK YOU! I've tried to correct myths about spring preload many times in some videos comment sections. Too many youtubers always mention the importance of setting up the pre tensioning and it always makes me pissed.

@christopherbellisario9195 2 жыл бұрын

Great build, love the progress and wheel choice!

@EwainW 2 жыл бұрын

Good to see a solid win after the last video, those wheels look sick.

@tomasmalik937 2 жыл бұрын

Just love watching this build! Thanks Mike and take your time ;)

@philippegelinas3083 2 жыл бұрын

Glad you went with 235/40! The HRE looks amazing with the ltw wing. Can't wait to see it with the full interior!!

@Yosemite_Sam 2 жыл бұрын

Merry Christmas to you Mike. Congratulations on the rims you chose. Great thinking with the air hammer. In fact this whole episode is inspired thinking. Happy New Year and all the best from OZ.

@rekt_86 2 жыл бұрын

on coilovers that have adjustable bodies the preload is really important. while it doesn't change the rate of the spring, it lets you set ride height by pre-compressing the spring and allows you to set an appropriate bump vs rebound length of the shock body. most people simply follow the blind instructions and set 5mm preload on the spring and wind up with no droop travel and wonder why their car rides like shit

@StanleyKubick1 2 жыл бұрын

front's perfection is only matched by your smile when you put the first wheel on

@pauledwards6446 2 жыл бұрын

Tighten all the bolts tight. Don’t want someone getting killed

@robertjordan9075 2 жыл бұрын

Looking very good,looking forward to seeing the completion.😎

@assjuicejunkie 2 жыл бұрын

Nice, wheels look killer. Like the content variation, from Ferrari to Ford and BMW 👍👍

@imSchwaggy 2 жыл бұрын

reverse mounting the front coilovers (left on the right, and right on the left) adds some negative camber, and clearance for aggressive spec wheels. i had 18x10.5 with 235/35/18 and 18x11.5 255/40 rear on one of my e36s . fit perfectly no rubbing anywhere .

@jongwoo 2 жыл бұрын

Loving the e36 content! Definitely correct on using the offset lollipop bushings for the 95M3 LCAs. I'm on adjustable AKG Lollipop bushings now to give me more caster adjustment. If you ever go up to 18" wheels, it may be required to give you enough clearance going lock to lock. Car is looking great!

@tollefreyerson6710 2 жыл бұрын

Gorgeous wheels!! Fantastic choice!!

@woznaldo 2 жыл бұрын

Those wheels are mint! They just work on the E36.

@Cryocleantexas 2 жыл бұрын

My R32 GTR had Work BRS poisons and they look just like those literally the best design ever!

@samueleinheri96 2 жыл бұрын

It might be a bit early but Merry Christmas & a Happy New Year Mike!

@rogerserafin 2 жыл бұрын

Very nice. Love the rims and the amber corners. Looking forward to seeing this complete. SUBBED !!

@Smokkedandslammed 2 жыл бұрын

Looks awesome dude!

@shekharbahuguna9475 2 жыл бұрын

Wheels are perfect for the car. Looks amazing.

@koltface 2 жыл бұрын

Thank you so much for mentioning spring preload. It's so frustrating how many people get hung up on that.

@andeleputo89 2 жыл бұрын

I got some classic 3 piece HRE 547 on my e36 sedan and they compliment the car so well

@violinmiata 2 жыл бұрын

Beautiful car, I wish it gives you the most joy that you can imagine it can! It really is the best 3 series body Bmw ever made

@ferkle1980 2 жыл бұрын

Clean AF. Love a classic 5 spoke wheel.

@johnendlich6744 2 жыл бұрын

Merry Christmas 🎅

@dakavanagh 2 жыл бұрын

Heh, I recognize "This Old Tony" on the TV!

@scapamouche 2 жыл бұрын

Came here to say this. Beat me to it! 👍👍

@k1wi_steve 2 жыл бұрын

Best wheel choice hands down 🙌

@KostadinDelizhanski 2 жыл бұрын

lol those wheels ... but what matters is you like them happy holidays and thumbs up

@blacktopmediauk 2 жыл бұрын

Awesome content as always. This will be a weapon in the road. As for preload, obviously that is a real thing, but I expect you said that on purpose. The more preload you add to the spring, the more force you need to overcome the preload and make the suspension work. The danger is adding too much preload means the suspension doesn't work until it's mid corner or something and then the forces overcome the preload and unsettle the car.

@benjamin1031 2 жыл бұрын

I love your content. Enjoying it very much... Then when I noticed you're watching This Old Tony in the background, I knew you were cool. LOL

@martinwink2063 2 жыл бұрын

Man those wheels look so good on the car! I think your comment about spring preload is not entirely correct. On a proper setup with the correct damper lengths, I agree it’s not a thing. However on the cheaper universal coilovers, where you can adjust the bottom bracket to the damper body, spring preload is a thing. If you wouldn’t put some preload on it, the damper will bottom out on compression. I would agree on those setups being disadvantageous for performance and general vehicle dynamics

@ItsDaJax 2 жыл бұрын

That LCA is just like the one on Panther platform cars.

@Rippers-TV 2 жыл бұрын

Those wheels are pefection!

@jakeeclouse4799 2 жыл бұрын

Yo those are mad clean.

@iamchrisg1494 2 жыл бұрын

This...Looks...Amazing

@oldcampusgarage 2 жыл бұрын

I did the e46 330i front brake conversion. Never had any issues but you have to run a 17" or bigger rim.

@adellisdevelopmen6593 Жыл бұрын

330i front 328i rear

@Sharkuis 2 жыл бұрын

Those wheels are 😍💯🔥

@jayinmi3706 2 жыл бұрын

Nice. My favorite classic BMW wheels are Schnitzers....but these are awsesome!

@forty-glocc 2 жыл бұрын

Dope build n the wheels look sick. One day when I have money I want an E36 with either a s54, 1/2jz, or even a k24/20 swap. HRE makes 🔥 wheels but u gotta pay to play. Good luck on the build hommie

@TeunS133N 2 жыл бұрын

Cool brake project aswell!

@geoffreyadams6236 2 жыл бұрын

Great wheels man.

@samisvideo 2 жыл бұрын

Love the rims!

@park0rdie 2 жыл бұрын

OG wheels.. look sick.

@Iherb7365ket 2 жыл бұрын

Merry Christmas everyone.

@jonny.rollhard 2 жыл бұрын

hecking heck heck yeahhh!!!!!!!!!!!

@iloveStance 2 жыл бұрын

Best wheels on that car 🙏😍

@capnthepeafarmer 2 жыл бұрын

Great looking wheel choice, Mike! The Nitto NT01 are a very sticky tire, my only complaint when I ran those is the road noise. They sound like you're running mud tires on the street.

@waltersobchak4252 2 жыл бұрын

Is the drivers side rear LCA bushing setup in the right direction? Looks like its installed 180* out of phase?

@joseugaz6338 Ай бұрын

Awesome I too have a set of 17 inch 525 wheels. What size lips are those

@LZ6U 2 жыл бұрын

I see you're watching a bit of the Old Tony.

@protodad1 2 жыл бұрын

Bungee cord idea is one I haven’t seen before. I usually keep bailing wire around just to hold up suspension.

@cezelipatrick 2 жыл бұрын

Wheels are great Mike. Amber indicators are cool too. Overall it’s coming out sweet

@stanceworks 2 жыл бұрын

That’s patrick! Hope you’re well bud.

@cezelipatrick 2 жыл бұрын

@@stanceworks doing well Mike. Merry Christmas to you and family 🎄

@mrmoss149 2 жыл бұрын

" I think". Love your commentary on yourself. And yes, the rims do look period correct ( I'm old, so I still say rims- NOT wheels).

@davidly5793 2 жыл бұрын

These wheels reminds me of the Saleen Stern that was on the Saleen foxbody

@imSchwaggy 2 жыл бұрын

330ci brakes fit m and non m, they're bigger, cheaper and have more venting than e36 m3 brakes. calipers too. u just wont have parking brakes unless u convert it. i highly suggest it.

@willjam465 2 жыл бұрын

Absolutely love the wheels. Not a fan of the tires; just never like the rim sticking out from the tire. Excellent wheel choice, though. Looking forward to more on the E36!

@angeloah 2 жыл бұрын

Congrats on the progress, nice choice in wheels but I mean come on, you always got dope wheels on your builds. These are pretty special, not an “hre guy”, you’re right though, these are perfect. 🤘🔥😎🔥🤘

@kristian1977 2 жыл бұрын

Love it!!! Still getting used to the Wing... Seems out of proportion to the rest of the cars lines.. But its your car so whatever floats your boa! Happy Holidays Mike!

@stanceworks 2 жыл бұрын

It’s a factory wing, too! I’ll talk about it in a future episode

@paynefulmechanix9675 2 жыл бұрын

are you going to do a stud conversion when you do your brake upgrade?

@Tex777_ 2 жыл бұрын

Are you planning on doing the m-twist sideskirts as well? I don't think you've mentioned if so

@kentandra14 2 жыл бұрын

finally! hopefully e36 is done soon, and track that car pleaseee

@jdubbsvt85 2 жыл бұрын

just a heads up, 996 calipers dont like to clear many different 17" wheel setups. Some work, depends on the barrel/dropout design

@Luca-pv6ks 2 жыл бұрын

Does anyone know if you can fit 18x9s in the front? I need some help😂

@SlightlyM3ntal 2 жыл бұрын

Those wheels remind me a lot of Stern Face II's. Nice choice! Any plans to put skirts on it? I know early models just have the metal rockers, but they always look a little naked to me now that I have cars with and without them.

@jamest5149 2 жыл бұрын

Look like a split rim version of RUF yellow bird wheels. Nice

@raduorban 2 жыл бұрын

Yaaaaaaaaaasss 💪💪💪💪💪💪

@wrexz 2 жыл бұрын

Like the wheel choice.. where is that one center cap tho?!

@DIYTRUCKERJAY 2 жыл бұрын

New subscriber

@liammoodyfilms 2 жыл бұрын

Please keep the E36 stuff coming.

@kevincrawford6864 2 жыл бұрын

Turning out to be nice

@axelillopr 2 жыл бұрын

damn 8 years, I guess my project isn't that slow

@pagani8 2 жыл бұрын

Probably doesn't really matter, but just if it helps you made a typo in the title. I love all your content! I not only enjoy seeing other projects apart from the k swap ferrari, but i know how helpful it can be to switch between projects to stay motivated.

@slimadi1 2 жыл бұрын

Coming along nicely, the wheel combo is spot on looks perfect for that era of the e36👌

@kevutrecht1 2 жыл бұрын

E46 330i front brakes perfect fit, Porsche 996 even better

@dailydriven991 2 жыл бұрын

Looks awesome. What’s up with that stack of wheels chillin behind the Ferrari? Unless thats the old Model A set… 👀🏎

@wabbit103 2 жыл бұрын

Would be interested in having a conversation about spring pre load to help better my understanding

@badledgend1172 2 жыл бұрын

I met a guy in North Carolina who bought Porsche Cayenne brakes off of eBay so he could have "cheap" six piston brakes. He had put them on his Chevelle after milling the rotors to mount GM wheels

@omursaraslan6316 2 жыл бұрын

I wonder what these wheels are named after. 5.25 maybe?

@danijuggernaut 2 жыл бұрын

Anyway Mike, you have to know that an M3 E36 (or any M) has no compare and completaly apart of the other *3er models. A friend of mine had a M3 E36 with 200.000 Miles !!! The car runned perfectely.M engines are another world, reliable, powerful, durable. .000

@charlesshamseldin9555 2 жыл бұрын

Nice wheels. Classic HRE's are tits no question. Perfect? Well my definition of perfect for the e36 would be Racing Dynamics or 3pc AC Schnitzers. Or for track duty, FIKSE's. The HRE's are dope though, and look amazing. Nice work Mike.