Yes it goes straight on a full send, a few questions: have you corrected the gyro? Have you checked that there is no play in the steering system? Also check that none of the tyres are loose on the rim or touching anywhere. They must all spin freely. Lastly check if you notice uneven wear on the tyres?

Tested with the Gyro off and on an maybe 10%, swapped the front tries around, sway bars on and off, tested with and without the shell on it and the wear on the tires is even. Adjusted toe in all 3 available positions, even tried a DumboRC DDF-350 (the receiver on it is a dumborc one) to actually see the percentage of trim and the issue is still present. I've submitted a request to banggood for a replacement/repair, I've noticed that from a top view the front right wheel seems to pop out a bit more that the left one. I'm guessing its a manufacturing issue. EDIT: There is play in the steering system but nothing out of the ordinary, there is play on all RCs I've owned, even the big names like Arrma, Traxxas etc.

@@CHRiSzFL best to request a replacement. It may be defective or may have been damaged in transit.

@@febuilds Back with an update, after a lot of tweaking made a ticket to banggood, they advised me to adjust CAMBER of all things. I did that out of curiosity and it seems that was the issue. Front camber made the front right wheel pop out a lot so tightened that. Made it a bit more stable but on full send still pulled. Then noticed the wheels on the back only wearing out on inner rim. They were full negative camber, adjusted that to neutral, still has e tiiiny amount of deviation but with 5% gyro (changed to the DDF350, the receiver is compatible) I can full send it without any worries. This thing is a beast, and fun as hell to make it go sideways.