👍🏻👍🏻 just found your channel. Inherited a small farm with L3300 HST with all the attachments. (All are needed on the property) I look forward to watching all your videos from the past and new ones as well. Thank you. Bill - Oregon Willamette Valley.

It’s one of the first things I added to my L2501, it’s where I grab when I turn around to look behind me.

My L3240 came with it and use it all the time

Good afternoon Martin

A ha! Finally something I already had. No spending my money for me this time, Mr. DIYMW!

That fender grip was one of the improvements they added to the 02 model update; if my L3902 didn't come with them I would have definitely added them on. One of the best "quality-of-life" upgrades for a tractor.

My LX2610 came with both installed...I cannot imagine not having it. Though I never get on and off the tractor on that side, it is great to have a safe place to steady myself whenever it might be needed. It's my first tractor...in my fourth year now with it and just over 400 hrs...I love it and it's been indispensable with our land development. At 64 it does the things I no long can and things I never could. Be well.

Interesting Martin. That right hand grip is the first thing I bought for my L3800. Back when I had it...

I am the same as everyone else here, L2501 and it did not come with the right handle, just two small round pieces of orange tape over the holes. I love Messicks and they make helpful videos, it was because of that I ordered the part through them when I purchased mine, however their shipping for single items is very over-the-top and needs to be adjusted. I ended up using washers and nylon lock nuts for mine and it is holding on great for years now! This is a 100% must-add item to all of our Kubotas as it makes operating them much easier and more secure.

That was one of the 1st improvements I made to my L2501. Now, if you find a better, more comfortable seat - please let us know.

My L3902 came with both the right and left handles.

Yes, along with a right side step .

Cheap if you can afford it, especially compared to falling off. Thx for the videos.

I'm going to draw one up and 3D print it.

Hi Martin,I discovered your channel through Tractor Talk With Gary.I’m looking forward to seeing more of your videos,and yes,I think every tractor should come with a grip fender on each side.

I realized in the first few hours with our L2501 that I instinctively put my hand where that missing handle wasn't. I ordered it through our dealer (actually had to give him the part #, he was coming up blank). Very happy we added it.

Oh my goodness, Martin. This is actually an upgrade I did before you! I never noticed that you didn’t have it. Otherwise, I would’ve suggested it to you years ago.

I had one installed before delivery of my M5660. Unfortunately, the dealer ordered the left handle and put it on the right side! Needless to say, I noticed it right away and they got the correct one installed. I use it all the time...if for nothing other than a place to put my right hand when traveling rough terrain.

Added one after a year of ownership. Best add on and is used alot. I can't get over the cost of shipping as well.

That was my first mod. I never get off on the starboard side. Been riding horses way too long…..

It was the first "mod" that I did to the tractor. They were only $40.47 in Jan of 2015.

That my friend, is a great idea, especially on uneven terrain. Unfortunately we DO have to do things sideways on the rolling hills too, like you've said and that added security is important. Especially as we all get a little older. We no longer have the reflexes we were blessed with in our 30's,do we. Another good informative video Martin.

I miss seeing your videos. I hope everything’s going OK.

Yes, I purchased the right hand side handle for my 3901 one week after I got it new. And I agree that it is a great addition and I use it all the time especially when I’m brush hogging hanging on turning around and looking. I sure do think mine was a lot cheaper than $65 when I bought it six years ago.

Hi Martin, This is one of those additions that really should have been a standard item not an option. And like you, I think the price is on the steep side! The good news is that the fender had been stamped to include the handle! Looks nice!

That was one of the first add ons I put on my 2020 L3901. Of course they are standard equipment on the new models!!

Good idea. My LX 3310 has the grip already on both fenders and they are nice to have.

Good Evening Sir, 😇👍I love your OUTSTANDING sence of humor ( throwing your box ) 🤣👍👍 Great Cost Analyst 🧐👍👍Great strong handle Sir 👍🧐💪Yes Sir, I did notice that the stick control was dangerously close from your Personal Bells 🤣🤣🤣🤣👍👍 Bailing or Existing From the right side will cause personal and permanent damage on my anatomy Sir Unless I Eject Myself ✨🚀🤣👍 OUTSTANDING Video Sir Cheers 🍻🍻

Yes I got one a week after I had my tractor home. Found it was very nice not to have my fingers anywhere near the moving tractor tire and for getting on from the right side.

My 2022 L2501 has 2 orange stickers covering the 2 holes. I guess paper stickers saved kubota $.50 over the plastic plugs.

I added the right side handle about a year ago, and like having it there. Your tractor is very fancy, they used a plug in the holes. Mine had orange tape over them.

Always informative and well done

Was really hoping you would finally get a grip...yeah geez...LOL

I'm with you Martin! Even if you rarely get on or off that side, just having it there to stabilize yourself in the seat makes it worth it. Have a great weekend! See ya!

When I bought my L3200 in 2013, it came with just the left one. When I discovered I could get one for the right side, I ordered one. (It had orange tape over the holes) When I bought my L4060 LE in 2022, it came with just the right side. I ordered the right side for it also. Had to have it. It also had orange tape over the holes. Love the tractor.

That was the 1st thing I added to my l3901. Well, I'm a lefty, so it only made sense since I do my steering with my left arm. I got mine from the local dealer, and it came with the nuts.

I need to add one to mine. I find myself holding onto the outside of the fender.

My Deere came with handles on both sides. I found a supplier that makes a step for the right side that helps also.

Happy New Year Martin!

I can see it being handy just to stabilize yourself with, but I was trained never to enter or exit the control side of equipment. A safety thing.

Happy New Year Martin! I could not agree more with you on this add on. In fact, it was the first "mod" I did to my L3901 when I bought it new several years ago. My old L2250 had handles on both fenders, and I used them so often I took them for granted. I was very surprised our friends at Kubota would not include both handles on these newer machines. I ordered through my dealer (not cheap either) and glad I added it to my machine. Worth the investment IMO and super easy install as you demonstrated. Be well!

Wanted a rh grip, just been too cheap to order one!! Spent my money on attachments. Thanks for taking us along on your video!! Stay Hydrated and Have a Safe Day

Looks good!!!!! I'm surprised it didn't come with one I bought a new kubota B2601 last year, and it has a handle on both sides. Have a Jesus filled day everyone Greg in Michigan

Thats the first addition I did to my L2501...(yep, thats what mine cost from Kubota and it came with both Flang Nuts)

How's she goin'? That hand hold is so nice eh. If it makes you feel better and safer, then the cost is not as critical eh!! I have one hand hold on my Massey Ferguson and I put it right i the center of the front cross member of the cab. That way I can use it from either side!! They sure are nice and I recommend everyone have them!! Take care!!

I find that I use my right hand grip perhaps more than I do the left side I am never not on uneven terrain on my farm, the only exception being when it is parked in the shed

I like the add-on handle, Martin. It's surprising how expensive the handle with S/H was. I too would have added the handle. Enjoyed a full-watch. Take it easy. Don 👍🏽🤠 01/09/24

Price keeps going up... I got tired of putting it off and just bought it.

My green tractor came with both. I don't see why Kubota doesn't include both.

I dont remember but I think my tractor came with handles on both sides. Mine is smaller and easier to get on and off. I have a BX23S. Great video Martin.

Very nice, my tractor came with both sides installed, on another note, now that your new garage has been up for a while are you happy with the led light you installed? I’m about to build a 30’x50’ pole barn and can’t decide on lighting. The building will be 14’ high. Thanks

Great video! I always watch yours as soon as YT notifies me. Seems like the flange nuts aren't used with lock washers. They must eliminate the need for them...? You have a better background than I do. Does that make sense?

Hi Martin, will you be installing the crossover relief valve for the hydraulic thumb? Looking forward to that video. Thanks

Not a chance; not for that price anyway. I've had my Kubota for over a year and I had to go check whether I had the handle or not. Don't recall reaching for it even once. To each their own though.

Someone may like to have your old plastic hole plugs if they lost one of theirs. Be sure to charge $25 for shipping and handling.

Hey Martin ! Thanks for your vidoes .always informative .lx2610su came with both handles .2020 what year is your tractor. Still need to make bh dolly etc.thanks Abe from ne ohio.

Just wondering if it will work on a 2501 Kubota

I have a Kioti Martin but yea… it certainly can’t hurt… except your wallet! That’s ridiculous shipping!!😳

No! I wouldn't invest in one! I'd buy a Kioti... No,...... wait, I already did!!!