The SS-02 Japanese Engineer Solder Sucker
Рет қаралды 27,571
3 жыл бұрынThe SS-02 Japanese Engineer Solder Sucker
Its time to up your solder suction game! Japan was undisputed leaders in electronics during the through hole component years, it only makes sense that their through hole tools are fantastic!
Many thanks to @FlamelilyIT (twitter) for sending this in, I will cherish it!
Amazon have these right now!
UK: amzn.to/33zpfQw
USA: amzn.to/2HaV2Qn
Head over to my Discord to join in the discussion!
Come chat with me on discord / discord
See my recommendations on Amazon: www.amazon.co.uk/shop/backoff...
If you would like to buy me a coffee or support the channel you can do so via Patreon at / backofficeshow
I do have some bits and pieces on my web store at backofficeshow.com
Please note: As an Amazon Associate I earn from qualifying purchases. As such links to Amazon products within this video may fall under this. Thanks to all of you who use these links and help support the channel - you are fantastic!
Thanks you lovely people, and keep on tinkering!
@nowthenad3286 3 жыл бұрын
I believe the long tube is from which you are meant to cutting replacement short pieces.
@shobhit.sirohi 2 жыл бұрын
yes
@vintagetubeamplifiers Жыл бұрын
I have arthritis in my thumbs and the old style was painful to use more then one or two times. I got one of these new ones and I can just push it on my leg or bench so much easier now, I'm glad I finally ordered one after my old tip got too wide and split.
@GeorgeWMays 3 жыл бұрын
Thanks for the video. I put this on my wish list of things to try out. Appreciated.
@backofficeshow 3 жыл бұрын
Hope it works out for you, I think its learning curve was pretty quick over the regular ones, getting used to the squishy end took 30 seconds to adjust :)
@Anthony-qt8wv Жыл бұрын
Thanks for the video! I wanted to get the Vampire version but it was $7.00 more. I ordered mine just now! Great video by the way!
@tonyfoster61 3 жыл бұрын
I bought one last week - excellent sucker!
@backofficeshow 3 жыл бұрын
You certainly get more suck for your buck!
@EdwinNoorlander 3 жыл бұрын
7:10
@backofficeshow 3 жыл бұрын
They do indeed look a little splotted
@ItsBoyRed 2 жыл бұрын
the longer tube is so you can cut replacement tips! its not ment as an extension, but hey if it work's it work's
@AwsBadr 2 жыл бұрын
The longer silicone isn’t a long replacement 😊 it is about 8 replacement tips. You have to cut it. Unfortunately couldn’t find it in the UK store! But it is available on US! I think i will get it from there
@lmaoroflcopter 3 жыл бұрын
Ooh. Another "Engineer" brand thingy I must own.
@backofficeshow 3 жыл бұрын
Oooo they make other things?!?!
@lmaoroflcopter 3 жыл бұрын
@@backofficeshow oh yes... :) I've got the short stubby screwdriver ratchet thingy which is a godsend for getting into tight spaces and the screw extracting pliers with perpendicular ridges. Very functional kit. www.engineertools-jp.com/products
@backofficeshow 3 жыл бұрын
I need me some screw removal pliers
@ItsBoyRed 2 жыл бұрын
@@backofficeshow they are also the original makers of the "Vampliers" as far as i know
@backofficeshow 2 жыл бұрын
Vampliers - nice!
@HardwareUnknown 3 жыл бұрын
The teardown and review was useful, and then you completely sealed the deal for me when you used it for the first time. Seeing how quickly you desoldered that transformer and how clean the holes came out, wow. Decision made. Mine arrives tomorrow, so excited to try it out over the cheapies. Thanks for the video, especially the closeup views. By the way, can you please share a link to the blade tip you're using? I want to find something similar for my FX-888D. I love how thin it is; would make bridging in tight spots really easy. Closest I can find is the T18K knife tip, but it's still a 2mm wide wedge, not a thin blade like yours.
@backofficeshow 3 жыл бұрын
I'm not sure exactly of the top of my head, but I am sure I referred to it in this video and possibly a link in the description 👍 kzfaq.info/get/bejne/i6dzjbCmnNWUZp8.html
@HardwareUnknown 3 жыл бұрын
@@backofficeshow Part number was right in the video, thanks so much. Off to do some searching.
@stevensims3342 6 ай бұрын
I have the Kotto and this one now. The Kotto has been great but the end came flying off one day. Somehow the threading got messed up so had to put a bit of JB weld on it to keep the thumb piece on.
@Flamelily-IT 3 жыл бұрын
Lovely Japanese stuff. Excellent sucking power 😆 and I love mine. Glad you think it's a game changer. I concur👌
@backofficeshow 3 жыл бұрын
I reckon we need one that if you have your finger on the end and you depress the button it should not shift. Zero internal leaks. Like the MAXIMUM SUCK possible. :)
@ranbymonkeys2384 3 жыл бұрын
I should get mine today but how many times have you gone to suck the solder with the cheap ones and the plunger hasn't' been depressed or set and ready to go? I swear every time that happens. I noticed that you can tell with this one right away if the plunger is ready, that right there ALONE makes it worth it.
@tgheretford 3 жыл бұрын
Got one myself after recommended from MyMateVince on his videos.
@nowthenad3286 3 жыл бұрын
Great camera. What are you using?
@backofficeshow 3 жыл бұрын
I use the Panasonic Lumix GH series cameras
@Metalhead-4life 2 жыл бұрын
dO THEY MAKE AN AUTHENTIC HAKKO TIP LIKE THAT FOR THE HAKKO FX-888D STATION? What size is it?
@Terra101 2 жыл бұрын
I shouldn't have cheaped out on the solder pump, I learnt the hard way :D
@backofficeshow 2 жыл бұрын
What did you end up with?
@Terra101 2 жыл бұрын
@@backofficeshow Some noname cheapo pump. It works good for like 2-3 times then I need to open it to clean it, then repeat. I've ordered the SS-02, hope for better results :)
@backofficeshow 2 жыл бұрын
@@Terra101 fingers crossed!
@philipp594 10 ай бұрын
Solder turns liquid at 190C-ish so you will be fine. Just when you touch the iron directly for longer than a second you would melt it.
@fernandopasini6350 3 жыл бұрын
Tests the soldering iron that has the solder sucker 👍
@fernandopasini6350 3 жыл бұрын
shopee.com.br/product/303324494/7751065160?smtt=0.0.9
@backofficeshow 3 жыл бұрын
kzfaq.info/get/bejne/i6dzjbCmnNWUZp8.html Where is the sucker? I cannot find it.
@backofficeshow 3 жыл бұрын
oh you mean "test"? Sure I will look out for one. I always thought they looked good for the money.
@aurthorthing7403 3 жыл бұрын
Vellemen makes a heated solder sucker that's awesome and affordable. It's like these only you plug it in the tip heats up. I would share a link but IDK if youtube will flag my comment? Here's the description: Velleman VTDESOL3U Vacuum Desoldering Pump with Heater 30W
@backofficeshow 3 жыл бұрын
I know the kind well, they seem to be well available and significantly cheaper than the motor ones. I do like the explosive suction of a spring pump, can't be matched
@rmanpojo8485 3 жыл бұрын
I have this but it doensn't do the job well. imo the nozzle is too big..
@harrybugallon3516 2 жыл бұрын
Wow! That sucker tool from Japan, It really SUCKS! Great video presentation!
@normdurkin6425 3 жыл бұрын
..I bought one.. my first.. wanted something good...
@electrical_engineer1 11 ай бұрын
Heavy four layer pcb use work better in?? Your use very simple pcb.
@user-ht6qt6zv1c Жыл бұрын
disable your cam's auto focus
@andreiciora2765 3 жыл бұрын
Try a zd 915 desoldering iron
@backofficeshow 3 жыл бұрын
I did, it broke, I absolutely hatred it 😂
@andreiciora2765 3 жыл бұрын
@@backofficeshow yes i broke my tube glass as well
@backofficeshow 3 жыл бұрын
Everyone seems to like them but I do not 😂 I prefer this new sucker any day
@andreiciora2765 3 жыл бұрын
@@backofficeshow same but i am repair a lot of bord and the desoldering iron is more quick and precise but is a horror to cleaned
@backofficeshow 3 жыл бұрын
There are other styles like the heated pump version. I will look for one of those.
@sirstretchyboy69 Жыл бұрын
Docking 🤣🤣👉👈
@backofficeshow Жыл бұрын
They love docking on the international space station, always at it
@sirstretchyboy69 Жыл бұрын
@@backofficeshow cracked me up when you said that 🤣
@jamisondanecker8186 2 жыл бұрын
Docking? whats that mean?😅😅
@backofficeshow 2 жыл бұрын
Something about space craft I think 😂
@jamisondanecker8186 2 жыл бұрын
@@backofficeshow indeed. +1
@junaidinajun9818 Жыл бұрын
Merk?..pump
@elmariachi5133 Жыл бұрын
I just bought one - and it sucks! But not in the good way.. it has so ridiculously low suction power, it simply doesn't work :( I don't know why.. opened it and everything is looking normal.. at least compared to this video. I could not see what the other inside half is supposed to look like as it wasn't opened from the back in this video.. Also the sound when releasing the pump is strange.. it sounds a bit like my old standard-plastic pump, when it's clogged. But there's nothing inside, it's completely new and clean.
@backofficeshow Жыл бұрын
That does not sound right 🤔
@elmariachi5133 Жыл бұрын
@@backofficeshow I just filed for return at Amazon. Don't want to sit on this kind of expensive thing if there's no easy fix available :(
@backofficeshow Жыл бұрын
I think you did the right thing
@elmariachi5133 Жыл бұрын
@@backofficeshow Thanks. It's just so annoying.
@backofficeshow Жыл бұрын
The old style ones have been around for a long time. I am sure there are a few high quality versions of those available as well. I have some for a few decades and even they were second hand 😂
@ranbymonkeys2384 3 жыл бұрын
checking it out with your TEETH????
@mdtaylor2274 3 жыл бұрын
It's delicious!
@janplexy 4 ай бұрын
This thing sucks!!!
Schematix
Рет қаралды 103 М.
Project Farm
Рет қаралды 878 М.
backofficeshow
Рет қаралды 4,5 М.
STICKY Art Shorts
Рет қаралды 2 МЛН
FISPECKT
Рет қаралды 264 М.