The TANQ-S- LetsFlyRc's New 3.5inch Freestyle Drone- Build Tutorial
Рет қаралды 7,611
20 күн бұрынFly More - Repair Less w/ the TANQ S
Drone Parts:
TanQ-S Collection:
rotorriot.com/collections/tan...
TanQ-S Pro Spec Build:
rotorriot.com/collections/tan...
TanQ-S Build Kit:
rotorriot.com/collections/tan...
TanQ-S Frame:
rotorriot.com/collections/tan...
Let'sFlyRC 1604 4000kv motors:
rotorriot.com/collections/tan...
Diatone AIO Flight Controller:
rotorriot.com/collections/tan...
HQ 3.5" Props:
rotorriot.com/collections/tan...
Light Weight Battery:
rotorriot.com/products/4s-300...
Recommended battery:
rotorriot.com/products/4s-660...
Linear Antenna:
rotorriot.com/products/5-8ghz...
XT30 PigTail:
rotorriot.com/products/xt30-p...
Let's Fly RC Micro Strap:
rotorriot.com/products/lets-f...
Tools:
Ultimate Tool Kit:
rotorriot.com/products/rotor-...
Ceramic Tweezers:
rotorriot.com/products/rotor-...
PH00 Phillips Screwdriver:
rotorriot.com/products/ph00-m...
Flux Core Solder:
rotorriot.com/products/rotor-...
3D prints and Tune:
www.thingiverse.com/letsflyrc
www.thingiverse.com/thing:658...
More Information on the TANQ S:
• 3.5” BANDO BASHER - Ta...
#FPVFREESTYLE
- - - - - - - - - -
Support Rotor Riot by purchasing from our store:
rotorriot.com/?aff=1
Want to fly FPV like the pros? Start here:
rotorriot.com/pages/beginners...
Want to start off in the simulator first? We've got you covered:
rotorriot.com/products/fpv-re...
Get Pre-Built Drones here:
rotorriot.com/collections/ful...
Get Rotor Riot Apparel here:
rotorriot.com/merch/?aff=1
Get Rotor Riot Motors here:
rotorriot.com/hypetrain/?aff=1
Check out the latest FPV Parts on the market:
rotorriot.com/new/?aff=1
- - - - - - - - - -
- FPV Freestyle Pilots / Hosts -
Shawn Morrison [Let's Fly RC]
/ letsflyrc
- Production Team -
Caleb Wright - Producer
Dan Maffet - Editor
MUSIC:
Chinoldinho - Let it go
www.rotorriot.com/?aff=1
@realpatriet 18 күн бұрын
Can this be used in a combat scenario like the other ones?
@Sloptit 18 күн бұрын
How big of a payload can the Tanq carry?
@LetsFlyRC 18 күн бұрын
¯\_(ツ)_/¯ never tested that.
@sailus6531 6 күн бұрын
I think it can carry a bomb easily
@wavesummit 18 күн бұрын
If you're building your first or hundredth it is always exciting to see a maiden launch, well done on the design.
@corey0863 18 күн бұрын
Was just in the shop getting a radio to start training on a flight sim last week. The guy and gal were super helpful and informative. Glad to have them close to the house. Can’t wait to step up from the ez pilot and sim.
@oneRella 9 күн бұрын
How good at precision strikes is this one?
@SlamDunc_FPV 18 күн бұрын
Just waiting on my 3D prints to be done and I’m set to build mine 😎
@garamfpv 17 күн бұрын
갔고싶다😍😍👍🏻
@coimbrafpv 18 күн бұрын
Excellent video; congratulations!
@DronzenFPV 18 күн бұрын
Awesome video....I'm excited to build one
@MunstahFPV 17 күн бұрын
Excellent build, I find the 850mah 100c Lipo is perfect for 5 solid minutes of flying with RFiD module on my same Tanq-S build
@eprohoda 18 күн бұрын
how’s life?. love it~ you made amazing , goodnight!💥
@davemicah3086 18 күн бұрын
Question, got the Avatar DIY kit. When I upgrade to Betaflight 4.5, none of the motors will spin, downgrade to 4.4 and works fine. I tried updating BLHeli, but couldn't get the BL Heli configurator to read the ESC for an update and I heard BL Heli is not longer an active project so no updates. I'm stuck on 4.4 for now.
@LetsFlyRC 18 күн бұрын
You may have not had a motor protocol enabled in the motors tab - it comes disabled by default. Dumping my txt file should fix that. 😊
@davemicah3086 16 күн бұрын
@@LetsFlyRC Hey Thanks, your correct, I had to enable the Bidirectional Dshot in the Motors tab. :)
@davemicah3086 16 күн бұрын
@@LetsFlyRC I got one more question which I can't seem to fix. My Avatar seems to be stuck in "Standby Low RF mode". My OSD works great, triple checked everything. The only way I can get the system to record is to go into the googles and turn off "Standby Mode" which I don't like to do because it uses high power not flying. Have you seen anything to fix this? Betaflight 4.5, and Avatar 37.42.7. Can't seem to find a fix for this one, does it work on your builds? Thanks so much.
@LetsFlyRC 16 күн бұрын
@@davemicah3086 standby mode needs to be off. I would never want standby mode on. If you disarm far away, or crash far away, you might find yourself in a situation where you can’t regain signal. Just plug in and fly, and don’t sit around waiting, letting the vtx overheat. I can’t speak to a situation with standby mode on, because I have never flown my drone in that configuration. Because it doesn’t suit my needs.
@davemicah3086 16 күн бұрын
@@LetsFlyRC Hey thanks, yeah that's pretty good info, didn't think about that yet. The Tanq-S is my first larger quad, only been flying the 1s walksnail whoop mostly indoor so never thought about getting stuck somewhere. I guess it's not an issue then.
@Steve-O_FPV 18 күн бұрын
Using a lighter to shrink, it must be amateur night! Now I remember why I don't watch Rotor Riot anymore.
@LetsFlyRC 17 күн бұрын
That’s not very nice. My butane ran out of my portable torch. Had to go borrow someone’s lighter 😂
@FREEDOMFPV84 16 күн бұрын
Well I tried ordering all the parts and half of them are out of stock my paycheck came to late lol as soon as it is back in I will be building one of these thanks man for the video always good advice on building
@bensettos8705 11 күн бұрын
Sweet little quad! I’m assuming it’s not sub 250 tho. How much does the frame weigh dry?
@ederplays2788 13 күн бұрын
Can it hold a GoPro? And how much is the whole kit + bats?
@showdownz 18 күн бұрын
Can confirm... I used a pickle as a battery and a chopstick as an antenna. My experience was different!
@r3beatty 18 күн бұрын
Check your pickle polarity- i had a problem with that.
@LetsFlyRC 18 күн бұрын
😂
@showdownz 16 күн бұрын
@@r3beatty Tx for the tip. I flipped it around and was much happier with flight performance. Also I swapped out the chopstick for a candy cane. Range is about the same but when I loose signal the static is red and white. I consider this an over all improvement.
@gsestream 17 күн бұрын
try 3d sewn cross chassis from continuous carbon fiber, yep its without the epoxy laminate binder, but instead like carbon fiber layers sewn together in 3d.
@user-wh1cr6vv4o 17 күн бұрын
Mini tanq
@LetsFlyRC 17 күн бұрын
@packtheripperfpv5071 18 күн бұрын
Tiny Tanq looks amazing!!!!! Oops now you have to find me. I live in Michigan. Trying to make it easy for you to find me brother. ❤️ Great frame!!!!!! Very well thought out! My next build.
@DronzenFPV 18 күн бұрын
HA!
@packtheripperfpv5071 18 күн бұрын
Wassup Dronzen!!!!!!!! Hope you are well brother!!!!!!!!
@DronzenFPV 18 күн бұрын
Indeed man @packtheripperfpv5071
@LetsFlyRC 18 күн бұрын
Haha. I like MI - Detroit, specifically - happy to come find you, lol
@AchronTimeless 8 күн бұрын
Would a Grinderino by any other name rip as sweet...
@LehtusBphree2flyFPV 17 күн бұрын
We need rotor riot to make there own flight controller stack so when the ban Chinese technology we have a backup to rely on
@CarlosRodriguez-vg2ob 17 күн бұрын
Can we get it with gps
@LetsFlyRC 17 күн бұрын
I will try to see if I can squeeze one on there
@nullstyle 18 күн бұрын
Bitsytanq
@crumbled_fpv 18 күн бұрын
why again?
@markwilliams5654 18 күн бұрын
The 5" is dead for so many reasons 😮
@themocaw 18 күн бұрын
I don't think 5 in dead. However, I do think it's going to go the way of x-class and 7 in. It's going to be the sort of thing that enthusiasts fly rather than being the standard.
@chd2323 18 күн бұрын
Just way too expensive.
@rainsquadfpv 18 күн бұрын
I still rip my 5in quads but 3in dos have a upper hand
@karllauer6452 18 күн бұрын
Heavy, underpowered, slow. Not for me.
@vinnies8in 6 күн бұрын
luv you guys besides botgrndr says
Maryana Lokel
Рет қаралды 1,8 МЛН
Casual Justice
Рет қаралды 10 МЛН