The Ultimate Guide To Properly Installing Cabinet Knobs By Renee Romeo

  Рет қаралды 87,922

Renee Romeo

Renee Romeo

Күн бұрын

The Ultimate Guide To Properly Installing Cabinet Knobs By Renee Romeo
www.reneeromeo.com @reneeromeodiy #diylikeapro
Install Cabinet Knobs the Right Way (how to) - Renee Romeo
Are you cabinet knobs installed correctly?
ttp://reneeromeo.com/2018/11/16/how-to-organize-a-small-walk-in-closet/
reneeromeo.com/2018/09/14/how-...
reneeromeo.com/2018/08/02/how-...
reneeromeo.com/2018/06/04/new-...
reneeromeo.com/2018/03/29/how-...
reneeromeo.com/2018/01/09/your...
reneeromeo.com/2018/02/06/how-...
reneeromeo.com/2017/12/22/how-...
reneeromeo.com/2017/12/27/the-...
reneeromeo.com/2017/10/17/best...
reneeromeo.com/2017/12/01/idea...
reneeromeo.com/2017/09/09/how-...
reneeromeo.com/2017/08/24/atta...
reneeromeo.com/2017/08/29/easy...
reneeromeo.com/2017/08/15/how-...
reneeromeo.com/2017/08/01/tips...
reneeromeo.com/2017/06/27/3-ea...
reneeromeo.com/2017/07/27/how-...
reneeromeo.com/2017/06/09/how-...
reneeromeo.com/2017/05/25/conv...
reneeromeo.com/2017/05/09/how-...
reneeromeo.com/2017/05/03/iron...
reneeromeo.com/2017/04/25/the-...
reneeromeo.com/2017/01/01/best...
reneeromeo.com/2016/12/29/inst...
Learn how to install cabinet knobs the right way.
I will show you how to install cabinet knobs the right way in this video tutorial. If you install cabinet knobs in the wrong locations on your cabinets, the end result may make you unhappy. The improper location of knobs can make an entire room look ‘off’. You may not be able to recognize the problem right away but you will after viewing this video. I see them installed in the wrong location all the time. So, let’s talk about cabinet knobs, their placement and how to install them properly. Anyone can do this correctly.
What if mine are installed wrong?
If you inherit this problem as a result of a new home purchase, you can always fill the existing knob holes with blend-fil and start over! This product will allow you to match your current cabinet stain and blend in seamlessly with your cabinet doors. It’s very easy to apply to apply to cabinetry, holds up to abuse, and you will be happy with the results. Best yet, it will be the most inexpensive purchase associated with the job.
Let’s fix the problem!
I will take you through my guidelines for locating the perfect spot for your new knobs. You can use this method on cabinet doors and drawers throughout your home, with perfect results every time. This is a simple process that only requires basic tools that you probably already have in your tool box. This is a project that is quick and easy. It has the ability to completely transform your space too! If you choose new knobs in a different finish, you can help to update and modernize a tired looking space. Who knew that the placement or replacement of cabinet knobs had the ability to do all that?
The DIY site that teaches you how to do everything around your home.
The Ultimate Guide to Properly Installing Cabinet Knobs by Renee Romeo, how to install knobs, install cabinets knobs the right way, cabinet knob installation, installing cabinet knobs, how to install vanity knobs, kitchen cabinet knobs installation, install knobs on cabinets, install cabinet knobs, how to install cabinet knobs, cabinet knobs, installing kitchen cabinet knobs, install knobs on kitchen cabinets, how to install cabinet hardware, cabinet knob placement, renee romeo

Пікірлер: 52
@adamalexander8966
@adamalexander8966 5 жыл бұрын
That was such a helpful video. Perfectly paced too, thanks so much!
@ReneeRomeo
@ReneeRomeo 5 жыл бұрын
Adam Alexander, Thank YOU for the kind words! I feel like I'm improving my video style every time I film a project. Sometimes it goes really well. You made my day! All the best to you and your projects, Renee
@cyndeepokorny3413
@cyndeepokorny3413 5 жыл бұрын
Thank you for the 2 inch rule! Great video
@ReneeRomeo
@ReneeRomeo 5 жыл бұрын
Jolearra Tshiteya, You're very welcome - and thank you! Your cabinet hardware is gong to be positioned perfectly!! If you want help painting cabinetry, try my video here: reneeromeo.com/2017/02/18/the-best-and-easiest-way-to-paint-cabinets/ All the best with your project, Renee
@BestAccessDoors
@BestAccessDoors 6 жыл бұрын
Great work! Will you be doing more videos like this soon?
@weavermarkr
@weavermarkr 3 жыл бұрын
This is the most helpful video!
@ReneeRomeo
@ReneeRomeo 3 жыл бұрын
Hi Mark, Thank you for your kind words! Your cabinets will be picture perfect now. All the best with your project, Renee
@tedeschliman
@tedeschliman 5 жыл бұрын
Very good video. One point, I had a problem addressing the short screw issue in one of my drawers when I drilled a larger hole from the inside of the drawer. Over time, the cheap wood kept chipping away and I struggled to keep tension on the knob. The solution ironically was your second step on the lower drawer of using a metal washer to brace it. I actually used a couple to get to the right length needed, and it kept the drawer wood from chipping from the inside out. Cheap solution and I bought extras in case I need them for other drawers.
@ReneeRomeo
@ReneeRomeo 5 жыл бұрын
Ted Eschliman, Thanks for the tip! If that starts happening to me, I'll remember your note and grab a washer right away. I posted a workshop video full of storage solutions for my nuts, bolts, washers and fasteners a while back. Click here to view: reneeromeo.com/2017/01/01/best-tips-for-organizing-your-home-workshop/ All the best, Renee
@tedeschliman
@tedeschliman 5 жыл бұрын
Wow! That was inspirational, too! You have amazing ideas.Thx.
@ReneeRomeo
@ReneeRomeo 5 жыл бұрын
@@tedeschliman Awww... thanks Ted! If you're interested in more ideas, I'm currently participating in Home Depot's 2019 Patio Style Challenge. You can follow me over the next few weeks to see how I do: reneeromeo.com/2019/04/05/2019-patio-style-challenge-w-the-home-depot/ I'll post every day on Instagram @reneeromeodiy Thanks! Renee
@FernandoRodriguez-ds5ri
@FernandoRodriguez-ds5ri 5 жыл бұрын
Great video! Tip #1 use a cabinet hole template. But still a drop dead gorgeous video.
@ReneeRomeo
@ReneeRomeo 5 жыл бұрын
Fernando Rodriguez, Great tip!!! I'm just trying to help all of us out that don't have specialty tools (like templates) sitting around the house. Thanks for drop dead gorgeous complement! All the best, Renee💖
@BurtBowers
@BurtBowers 6 жыл бұрын
Turned out well I will be installing all new hardware knobs n handles i figured i only have three actual pull out drawers so i will use three handles & 8 doors which i will use the knobs on i have holes to fill in on all the doors being all them had handles on them rather have the knobs looks way better..
@ReneeRomeo
@ReneeRomeo 6 жыл бұрын
Old Timer, The knobs are easier to use too. It's going to look great! Thanks for the nice comment, Renee
@tonyt3955555
@tonyt3955555 6 жыл бұрын
nice video, strait to the point talking while showing perfect thanks alot
@ReneeRomeo
@ReneeRomeo 6 жыл бұрын
tonyt3955555, Oooh, thanks - I try to leave out most of the fluff in my videos. I hope this helps make your cabinets more beautiful. Thanks for watching AND the nice comment, Renee
@sharon4864
@sharon4864 3 жыл бұрын
Thanks for the video....now can we have a how-to video for your hair? Gorgeous & so full!
@ReneeRomeo
@ReneeRomeo 3 жыл бұрын
Hi Sharon, Oh thank YOU! My hair is truly a DIY project. I dye it, cut it and style it myself. No choice really. No one else 'gets' it and I've walked out of salons wanting to cry! You're sweet. Renee
@sharon4864
@sharon4864 3 жыл бұрын
@@ReneeRomeo Oh, I SO relate, I do all mine myself too and gave up on salons 20 years ago when the last one left me with an actual bald spot & that was the salon I went to to correct the damage the first salon did...oh, and I did cry! lol I can laugh about it now. (mostly)
@ReneeRomeo
@ReneeRomeo 3 жыл бұрын
@@sharon4864 It's so wonderful that we have that in common - but unfortunate that we NEEDED to do it! Perhaps I can liberate a few more of us from the salon with a video tutorial. And... let's not even mention all the money that we've saved over the years...
@user-be2pv6ue3o
@user-be2pv6ue3o 3 жыл бұрын
Thanks
@ReneeRomeo
@ReneeRomeo 3 жыл бұрын
You're very welcome! Renee
@carmenc8103
@carmenc8103 5 жыл бұрын
I've just installed kraftmaid painted cabinets...when cutting the kick trim the product chipped badly. we bought a new saw blade and placed painter's tape along the cut line, and recut the trim piece. this helped with the chipping but when we removed the tape the paint came off with it! I am so worried that there will be chipping when I drill holes for hardware. Do you have any suggestions?
@michaeldefilipps2364
@michaeldefilipps2364 2 жыл бұрын
cut it face down
@1975eps
@1975eps 2 жыл бұрын
NEVER NEVER NEVER screw the knob onto the front face of the cabinet! That will permanently scratch or etch into the front. ALWAYS screw from the back side while holding your knob in place. Doing this will prevent front damage in the event you install knobs with smaller bases later.
@ReneeRomeo
@ReneeRomeo 2 жыл бұрын
1975eps, There will always be an indentation on the wood due to pressure from the screw anyway so I never worry about it. Renee
@cerenademe9433
@cerenademe9433 2 жыл бұрын
Yes, especially when you’re making the hole bigger to give “wiggle room” (which I would not personally do).
@joeanderson304
@joeanderson304 4 жыл бұрын
It looked like the second door had the screw of the knob too long. Did you cut it back a bit?
@ReneeRomeo
@ReneeRomeo 4 жыл бұрын
Hi Joe, You're right. The screw is a bit too long. I just left it the length that it is but it's easy to trim the screw down if you have a vice and hacksaw. I didn't demonstrate the process because (I'm guessing) most people don't own a vice if they don't have a home workshop. Fell free to cut it away! Thanks for the great question. I'm sure others have wondered too. Renee
@sir.gandolf
@sir.gandolf 4 жыл бұрын
I was thinking same thing, drop dead gorgeous, but not the knob placement..well maybe my knob with drop dead gorgeous Renee
@TanyaScorpio
@TanyaScorpio 4 жыл бұрын
Hi Renee, definitely need your help with 2 questions backslash and knobs. Background: Installed kitchen cabinets (J and K cabinet J5 mahogany) and my countertop will be Solaris (little gold and copper). I have a cooper wall mount range. Appliances are stainless steel, faucet(oil rubbed bronze). Knob Question - I don't know what color knobs should I use? Backsplash Question - already have tumbled gold 3x6 and floor and decor recommended and i purchased glass champagne and lilac tile. The tumbled gold and glass lilac will be the entire stove going up to the top of the 42'' cabinet and the champagne tile will go under all the cabinets. I'll put also a gold sticks to frame over the stove. Does this glass tile mixed with the tumbled stone make sense because they are two different textures clearly I'm definitely not the designer and the lady did it should pop. I greatly appreciate your assistance. Also, I can send you pics if that would be easier. Thanks in advance.
@ReneeRomeo
@ReneeRomeo 4 жыл бұрын
Hi Tanya, I definitely like to mix and match metals so you're on the right track. Could you send pictures to my email at renee@reneeromeo.com so that I can further assist you? It will make things easier for me. You may have to send them one at a time due to file size. Thanks so much, Renee
@TanyaScorpio
@TanyaScorpio 4 жыл бұрын
@@ReneeRomeo yeah sending now
@fenders9911
@fenders9911 3 жыл бұрын
way better with the cabinet tool no measureing, just put tool on and mark and drill way faster as well .but great video,
@ReneeRomeo
@ReneeRomeo 3 жыл бұрын
rick fe, Thank you so much! I just wanted to show people how to do this without a specialty tool. I've done this job so many times and have never purchased the measuring tool myself. Maybe one of these days... Renee
@jessek-9scentdetectiontrai10
@jessek-9scentdetectiontrai10 2 жыл бұрын
👍🏾❤
@ReneeRomeo
@ReneeRomeo 2 жыл бұрын
Thanks Jesse! So happy that you're discovering my videos. Enjoy, Renee
@1stFlyingeagle
@1stFlyingeagle 2 жыл бұрын
Use your eyes. Does it look the way you want it? Now, what is the measurement of the center of the knob? Not sure get double-sided stick tape and temporarily tape several knobs in position. Now make adjustments as needed. 2" rule is ok only but is not full proof.
@ReneeRomeo
@ReneeRomeo 2 жыл бұрын
Robert, Great idea with the double sided tape. If the cabinets are painted (like mine), just be sure to have the paint cure before you try. This is the way that's been fool proof for me over the years. Thanks for the input, Renee
@harrylong6548
@harrylong6548 2 жыл бұрын
When using a one size fits all knob as you have, the stud is much too long for the door and the overage could be a problem with items in the cabinet and possibly a safety issue. I'm sure you addressed the issue by cutting the access, but might need to inform viewers. If this has already been addressed in another comment below, my apology.
@ReneeRomeo
@ReneeRomeo 2 жыл бұрын
Harry, Point taken. Thank you for the feedback. It's always good to hear the positive and negative points of the tutorials I present. Renee
@thecatatemyhomework
@thecatatemyhomework 4 жыл бұрын
Why not buy a template to make it easier.
@ReneeRomeo
@ReneeRomeo 4 жыл бұрын
thecatatemyhomework, That's a great solution but I never got around to purchasing one. After all these years, it's just as convenient to do it this way. I try to use tools that most people have around the house so it's all good. Thanks for great comment, Renee
@born4thstime
@born4thstime 4 жыл бұрын
Wow, u have such thick hair. Must be nice..lol Good for when u get old. (: The cabinets look nice.
@ReneeRomeo
@ReneeRomeo 4 жыл бұрын
Hi born4thstime, Aww, thanks so much for the nice compliment! I have a long line of women with thick hair in my family so I can't take real credit for it. My Grandmother had particularly thick hair until the day she passed away. Very pretty! Thank you for watching my cabinet video too. If you'd like to see how to paint cabinets, I have another video here: reneeromeo.com/2017/02/18/the-best-and-easiest-way-to-paint-cabinets/ All the best, Renee
@carmenc8103
@carmenc8103 5 жыл бұрын
I've just installed kraftmaid painted cabinets...when cutting the kick trim the product chipped badly. we bought a new saw blade and placed painter's tape along the cut line, and recut the trim piece. this helped with the chipping but when we removed the tape the paint came off with it! I am so worried that there will be chipping when I drill holes for hardware. Do you have any suggestions?
@ReneeRomeo
@ReneeRomeo 5 жыл бұрын
Carmen C, That's an awful thing to happen to your cabinets. My suggestion is to get all new drill bits (for wood) and pre-drill smaller holes than necessary. That will give you the ability to test the stability of the paint before you drill larger holes. Beyond that, Green Frog Tape is made especially for delicate surfaces so it SOULD release just fine. I hope this helps! All the best with your project, Renee
@carmenin2010
@carmenin2010 5 жыл бұрын
@@ReneeRomeo thank you so much for your thoughts. That is an excellent idea to start small. I will get the Frog tape too and test it out in a hidden location.
@ReneeRomeo
@ReneeRomeo 5 жыл бұрын
@@carmenin2010 Please let me know how goes. It's what I would try. Renee
How to Install Cabinet Door and Drawer Handles/Knobs/Pulls
27:06
How To Install Drawer Handles on Cabinets - Perfectly Centered!
8:20
Doing Whatever
Рет қаралды 70 М.
Always be more smart #shorts
00:32
Jin and Hattie
Рет қаралды 46 МЛН
Получилось у Вики?😂 #хабибка
00:14
ХАБИБ
Рет қаралды 7 МЛН
Heartwarming: Stranger Saves Puppy from Hot Car #shorts
00:22
Fabiosa Best Lifehacks
Рет қаралды 19 МЛН
아이스크림으로 체감되는 요즘 물가
00:16
진영민yeongmin
Рет қаралды 9 МЛН
7 WORST KITCHEN DESIGN MISTAKES (& how to fix them✅)
14:03
Vivien Albrecht
Рет қаралды 1,5 МЛН
How to Install Base Kitchen Cabinets and save $1000's of dollars
19:40
Home RenoVision DIY
Рет қаралды 728 М.
How to Install Cabinet Hardware | Ask This Old House
8:47
This Old House
Рет қаралды 86 М.
How to Update Your Old Counter tops to Quartz
7:57
Home RenoVision DIY
Рет қаралды 1,5 МЛН
How To Install Kitchen Cabinet Knobs
8:25
Get It Done Home Repair
Рет қаралды 56 М.
Cabinet Knobs and Pulls - 8 IMPORTANT installing Tips
5:50
Weekend Honey Do List
Рет қаралды 501 М.
Professional Cabinet Hardware Drilling Jig Demonstration
29:25
Next Level Carpentry
Рет қаралды 53 М.
Unboxing MEGATRON 40th Anniversary Limited Edition Robot by Robosen
1:00
Duniya ki sab se pyari awaz 🕋 #azan #islamicprayer #quran
0:12
ashfaq Mughal
Рет қаралды 44 МЛН
ОН МСТИТ ПРОДАВЦУ МОРОЖЕНОГО
0:32