The Worst Wearable Computer

Рет қаралды 301,306

2 жыл бұрын

You can make a HUD with a transparent OLED - if you want it to suck.
The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/zackfreedman06211
I get asked a LOT to use a TOLED, a crystal-clear display, to make a cheap wearable heads-up display project based on the Tenex volumetric display. So I did! The only problem is that IT DOESN'T WORK BECAUSE THE DISPLAY IS ONE INCH FROM MY EYE.
How did I make this electronics project? How did I design the headset? Why doesn't it work, and why are you wrong when you think you can make it work? But most importantly, why DOES the Optigon work?! All will be revealed.
STL's: thangs.com/ZackFreedman/Trans...
⚠ Do not make this project! It sucks! ⚠
Bill of materials:
📺 Clear OLED Display: amzn.to/3rc1nhp
🍞 Better Driver Board: bit.ly/3zELwe3
🕊 Feather NRF52: amzn.to/3id9JkJ
🔌 Super-flexible silicone wire: amzn.to/3iRpVsj
🔥 ChipQuik (for desoldering header): amzn.to/2WrmoJC
🔋 Sticky Battery: amzn.to/3hJTmNs
🔌 Cable: amzn.to/36HA84G and amzn.to/3kpbvSo
🖨 Prusament Galaxy Black: amzn.to/3kWYik9
😵 Did the HypnoDisk kick in? Well, support my projects and watch stream replays at / zackfreedman
Hang out with me: / discord
Twitter: / zackfreedman
Instagram: instagr.am/zackfreedman
My printer is an E3D Toolchanger! I really need to get that affiliate link. You'll see a lot more of it.
😎 Sean Hodgins's Tenex Volumetric Display: • TENEX Solid State Volu...
Archival footage from "How the Eye Functions" by Karl Kurt, released into the public domain by the Prelinger Archives
Anatomical drawings released into the public domain by the Wikimedia Foundation
Interference SFX from Partners in Rhyme
All other SFX from www.zapsplat.com
Soundtrack:
"Some Breaks" - Gramatik
"Double the Daily Dose" - Revolution Void
"Come On Let's Go" - Le Gang
"Happy Song" - Taz Lazuli
"Funk it Down" - Gramatik
"Friday" - The Passion HiFi
"Keep On Going" - Joakim Karud

Пікірлер: 1 200

@zacharymesecke9638 2 жыл бұрын

Guys, you should totally watch every one of this guys videos. Also, I seem to be missing a large chunk of money

@jodean8651 2 жыл бұрын

I already have (90% of them are amazing and so are the other 10%)!

@CollinBaillie 2 жыл бұрын

This video was a fail... you tube shows 18:45 but the first half is just static... reload needed? My bank account is also mysteriously low..

@GodModeMaker 2 жыл бұрын

@@CollinBaillie Same! I am really confused what's going on. The video is just blank at those portions!

@shreyasbhatt7112 2 жыл бұрын

Probably just a glitch? Can’t believe someone would upload a half blank video smh

@twwhitehurst 2 жыл бұрын

same. the skillshare was 1 month free trial or 30% off for a year if i bought today

@DaveHojo 2 жыл бұрын

Jesus. It's like he didn't even think to put a multiverse in between his eye and the display. How could he be so obtuse?

@_Piers_ 2 жыл бұрын

Yeah! gravitational lensing would have taken care of this "problem" so easily!!!!!

@solarcheese 2 жыл бұрын

“What…What did you call me?”

@blazer5154 2 жыл бұрын

Or you could take the easy way out and engineer a synthetic eye to replace your own.

@BestHakase 2 жыл бұрын

BTW, second lens after the display

@WorldFastestSloth 2 жыл бұрын

Just create a little universe of people working for you to shoot photons straight, you know, kind of slavery with extra steps.

@roderik1990 2 жыл бұрын

It is at least functional as a cosplay prop. even if you can't read the HUD.

@_Piers_ 2 жыл бұрын

Yeah, it really does look the part and it not working would **probably** stop you from getting terrible eye strain.

@KaitharVideo 2 жыл бұрын

Everyone else can read the HUD though ... you can have it display "I can't read this, blame the physics engine"

@IM2awsme 2 жыл бұрын

Is it possible to buy this display in orang and yellow?

@_Piers_ 2 жыл бұрын

@@IM2awsme I've not checked, but the common colours are blue and white. If there's a white you could put coloured film over it to have your choice of colour.

@IM2awsme 2 жыл бұрын

@@_Piers_ db cosplays are about to take another step

@CraftComputing 2 жыл бұрын

Hard liquor? Careful, you're getting awfully close to my turf bro!

@literallyjuste 2 жыл бұрын

All of our turfs.

@truthdoesnotexist 2 жыл бұрын

oooh my motivation for making for making projects I know don't work is huffin PAINT

@3dartstudio007 2 жыл бұрын

So, you're telling me I can put two of these in front of both eyes and see right through them and walk around all day at comicon with my cyborg suit looking totally legit? This is a total WIN!

@jamesfoster7158 2 жыл бұрын

I was thinking the same thing for a Borg costume. Just but some cool targeting, tech, etc graphics that would look cool to the outside viewer.

@weberman173 2 жыл бұрын

same thing i thought, putting it into my Mandalorian rangefinder, i cant read it, so it dosnt annoy me, but everone else can see its cool

@glittalogik Жыл бұрын

Mount them facing outward with "These things are useless" on one and a QR code linking to this video on the other.

@sicotronicypunto7460 2 жыл бұрын

Zack: "let's put a lens on my eye" Me, blind as heck with my dummy thicc glasses: pathetic

@mattlewandowski73 2 жыл бұрын

I was getting hopeful there when he started talking about a lens being used... after an allergy induced microstroke about 8 years ago, my rx on my left eye is about 4 points off of my right eye. but I am so right eye dominant I generally do not notice. still the difference means I would have to get custom glasses made if I ever wanted to use HUD or VR... I was starting to get hopeful when he started about using a lens in conjunction with the display. I would absolutely talk to my eye doc about a set of glasses where the left eye had a very close focal point if the project could work.

@marcusborderlands6177 2 жыл бұрын

@@mattlewandowski73 what do you mean custom glasses made? I just wear my glasses in VR normally, and both my eyes are pretty different prescriptions

@morganaverynz Жыл бұрын

You merely adopted the bluriness, I was born in it!

@bored588 Жыл бұрын

@@marcusborderlands6177 he needs glasses that are essentially non prescrip on one eye, and the other eye needs to be prescrip. so one curved lens one flat lens, 99% of frames are not going to allow for that i.e. custom

@ZackFreedman 2 жыл бұрын

So you want to add a SECOND lens in front of the display to pre-un-distort the real world? Won't work either. The field of view and focal point of each eye will be different, so it'll feel like you're cross-eyed. While you're here, watch Sean's video! kzfaq.info/get/bejne/qbymZNKUlpq8Yas.html

@davidfairchild1991 2 жыл бұрын

damn it! I scrolled down here to suggest this!

@SuperchargedCoffee 2 жыл бұрын

Put lenses on the other eye as well 🧠

@shreyarora9738 2 жыл бұрын

oh ok makes sense, thanks!

@NicholasMarshall 2 жыл бұрын

What if you are already cross-eyed? Still not worth limiting your field of view, and the added bulk of 2 lens. The entire point was a less bulky display, and this shows that's not possible.

@shreyarora9738 2 жыл бұрын

@@NicholasMarshall how about higher index materials?

@OrionAerospace 2 жыл бұрын

If it looks cool and doesn’t work at least it’s cool, if it looks lame and doesn’t work it’s worthless. This fits the first one for sure

@BrainSlugs83 2 жыл бұрын

It could be a interesting cosplay prop...

@rickgreer7203 2 жыл бұрын

Yeah, it could be useful for cosplay/costumes where you actually want others to see what's on the display, and its not actually supposed to be useful.

@Grimmwoldds 2 жыл бұрын

It does work. Create wearable display. Wearable display is not visible to wearer. Create many wearable and wireless displays. Force everyone around you to wear them. Voila, physics bypassed.

@melodysm 2 жыл бұрын

The intro is already golden

@ZackFreedman 2 жыл бұрын

Thanks! This one took a lot of development, it had to be a certain length for some reason

@nsomething7805 2 жыл бұрын

Not just the intro the whole vid

@Minecraft-hb1su 2 жыл бұрын

agreed

@shythevans 2 жыл бұрын

@@ZackFreedman seems like the video got demonetized anyway. they probably did it out of spite.

@AmaroqStarwind 2 жыл бұрын

I know, right?

@barontau6552 2 жыл бұрын

You need double Fresnel lenses. One to refocus the OLED and a second to undo the first lens behind the OLED. You will have a pixelated real world but you should be able to have them both in focus.

@JaridMitchell Ай бұрын

This is what i was gunna suggest

@SeanHodgins 2 жыл бұрын

Wait a minute. I can make videos on projects that didn't work?! Genius. ...It was just shy of a brazillion.

@Sohcahtoa14 2 жыл бұрын

Mrwhosetheboss: *why thats my job!*

@ivancorrea5110 2 жыл бұрын

Hahahaahahah the best of all is that you can show us what you've learned so we can learn too! That's brilliant!

@UnclePip 2 жыл бұрын

Well, lifehack videos do that

@woadblue 2 жыл бұрын

Cool video, I just subbed. But my guy, you're so full of crap. Sincerely, a ghost.

@rosonowski 2 жыл бұрын

I mean, it didn't fail - he got the expected result. But yeah, I love videos of people's projects not working, and discussions of why. Life isn't a highlight reel, things don't always work out.

@nowanilfideme2 2 жыл бұрын

Seeing this live was cool, but seeing this condensed video was even better, wow.

@adamstele4286 2 жыл бұрын

Same i feel like we are in on the build now

@whiteydiamond 2 жыл бұрын

@SeaHay 2 жыл бұрын

Jokes on you, my near-sightedness makes things clear only an inch from my eyes!

@CollinBaillie 2 жыл бұрын

I can look myself in the eye on a bright day... I can clearly focus on the reflection of my eyes in my glasses. Maybe Zack should change his eyeball out for a screen, and use a curved reflector to be able to focus the image back at the screen, which is also a sensor. Easy.

@HarleyPebley 2 жыл бұрын

Haha, yep, I'm pretty much the same way. Downside is it's like having a lens between the display and the eye for a normal person, the real world is a total blur.

@IM2awsme 2 жыл бұрын

Than this would be perfect to put under your glasses

@SeaHay 2 жыл бұрын

@@IM2awsme maybe, but with the distance between my eyes and the lenses, it’d either have to be flexible or curved to fit comfortably

@OxibanCraft 2 жыл бұрын

@@CollinBaillie Hey, optician here :D Given that the inside of your glasses act as a mirror, the actual distance your eyes have to focus on gets doubled. This makes a huuuge difference close to your eye because the needed refractive power gets exponentially increased the closer you get. You can calculate this: Refraction needed= 1/Distance in metres. Glasses should have a distance of about 15mm to your eyes requiring 66,67 dpt of refraction to see the lens itself. When looking into your reflection you only need 33,33 dpt. Exactly like he said, its physically impossible to make that screen work with our current understanding of optics.

@NL12PT 2 жыл бұрын

that display could make a good "futuristic" sights for a nerf blaster...

@_Piers_ 2 жыл бұрын

**TARGET LOCKED**

@ZackFreedman 2 жыл бұрын

I agree. Maybe for a future project...

@L3gitNinjaMonkey 2 жыл бұрын

ooo with a little ammo counter

@formicarufa7943 2 жыл бұрын

Actually it kinda allready exist. Look up the vortex nitron sights.

@edwardfletcher7790 2 жыл бұрын

@@L3gitNinjaMonkey In the Aliens universe, all ammo counters must be red 7 segment LED's. lol

@justin.campbell 2 жыл бұрын

I had my screen 2 inches away from my face when the disk dissapeared and gwen was staring into my soul

@EvilSpyBoy 2 жыл бұрын

'No cones, just lines' sounds like an album title

@zackarybrown6752 2 жыл бұрын

I feel like this is a perfect build to mod into a scouter from DBZ.

@RemedyElixir 2 жыл бұрын

How much would it cost me each time I crush one of them while yelling "OVER NINE THOUSAND"?

@jesusllanas9318 2 жыл бұрын

@@RemedyElixir enough for me to want to star a business even if you were the sole customer

@JWD-II 2 жыл бұрын

and here i was, expecting a wearable with a vacuumer...

@davidschiller4112 2 жыл бұрын

This was a really, really great video. I love how you have not only upgraded your production quality, but you’ve also become more innovative and seamless in your creative decisions. The illustrations were great (and a perfect device for this explanation), but when I noticed that the old timey voice behind the eyeball stock footage was you… that is some amazing attention to detail. I’m glad you switched to being a KZfaqr. You are very good at it.

@simpson6700 2 жыл бұрын

today i learned that contact lens displays will never be a reality...

@jetison333 2 жыл бұрын

Not neccesarily. Just need a way for the contact lens to always emit light in one direction. Like maybe thats impossible, but it also might not be.

@joselagunas643 2 жыл бұрын

Maybe the edge of the contact lenses is the display and the middle part of the contact lens is the lens that display the image

@oasntet 2 жыл бұрын

@@jetison333 There's another technology we already have that produces light in nearly-perfect parallel rays. Usually we're told _not_ to point those at our eyes, though.

@felixmerz6229 2 жыл бұрын

If the issue is overlapping "rays" and the emitter sits right at our lense, in other words: There is no space for the rays to overlap, shouldn't that work?

@owenkegg5608 2 жыл бұрын

Nay. Just interrupt the optic nerve and hack a signal into it. Eventually.

@cyn0_ 2 жыл бұрын

Hey Zack, awesome video! It was great watching it come together on the stream, and you explained it all really well here. Btw, where are you getting those micro displays you were talking about, id love to get my hands on some.

@owenkegg5608 2 жыл бұрын

I think if you click somewhere it pulls up a parts list in KZfaq. Just check the description, I guess.

@shyamnimavat2276 9 ай бұрын

Hi @cyno0_ , Were you able to find the display? I would like to get it as well. Couldn't find it anywhere. Would be great if you still have the link and could share it. Thanks.

@Cleruian 2 жыл бұрын

Noob question: 3d cinemas work with polarization glasses, where each side filters a differently aligned photons. Could similar tech be used to "prealign" the photons instead of a lens so that only orthogonal photons are sent out in the first place?

@Chrisamic 2 жыл бұрын

Unfortunately, no. Polarising filters only block photons with the incorrect orientation, they don't actually align anything. You'd still need a secondary optical system which makes the screen image appear to be at infinity. The ONLY solution is the mirrored secondary optical system which makes the screen appear to be far away. Until someone markets that system cheaply and competently, these glasses are unobtainium.

@cyber_hacker 2 жыл бұрын

you can design it like a computer, split them using such lenses/mirrors. next use a some mirrors and prisms, or magnetic fields to rotate the before sending them back to the filter.

@ZackXa 2 жыл бұрын

Glad I wasn't the only one to immediately think "polarize the light"

@akaChurch Жыл бұрын

@@Chrisamic then why do the Vufine HD heads-up display work inches from ones eye? Because they aren't transparent? How's that work?

@Chrisamic Жыл бұрын

@@akaChurch because they still have an optical system... which makes them appear to be far away. It's exactly the same principle just that it doesn't have to be mirrored against an IRL background. Think about it... unless you are exceptionally short sighted (and I actually was) then no human can focus something only "a few inches" from the eye. There has to be an optical system in there somewhere. Usually, it's closer to the eye than the thing you want the eye to focus on. We do the same thing with an SLR camera. The ground glass is only a few inches away (but reflected twice in the pentaprism) but the lens in the eye piece allows us to perceive it as being at infinity. Modern cameras with digital viewfinder screens? Same thing.

@Brett_is_Veng 2 жыл бұрын

your writing is elegant and your delivery is captivating, i cant look away and i really look forward to each of your vids. I cant tag on to your streams cos your in the free part of the world and I'm not so I'm at work when ur streaming

@mr_vantastik8553 2 жыл бұрын

You are very entertaining and have loads of information. This is my favorite KZfaq channel. Keep up the great work!

@MaheerKibria 2 жыл бұрын

i am extremely myopic so i can bring the display almost up to my eye and still be able to focus on the disk my nose can literally be touching the screen so no i wouldn't say no one. i would say most people. That being said i can't see far away anyway without corrective lenses so it doesn't really make much a difference the real world is blurry either way

@machinerin151 2 жыл бұрын

Make a corrective lens that goes behind the display. There. Problem solved. You look through a display at the real world - the real world is corrected. You look at the display - the display is not corrected.

@any1alive 2 жыл бұрын

I am withyou as well. and am used to focusing that close to my face

@charadremur333 2 жыл бұрын

Hey Zach, what if you used a frenell lense to parallelize the light from the display. To fix the room light issue, use a defocusing frenell lense to create a parallel light from the room, but having the display overlayed?

@jamesflames6987 9 ай бұрын

This.

@AR-yr5ov 2 жыл бұрын

The scripts for your videos are always really well thought out- subbed!

@glitterbrains69 2 жыл бұрын

this was a super good video, iv'e always had an interest in optics and i just love how non-obvious and counter intuitive they are. so complicated and fun lol :)

@mattesr.8680 2 жыл бұрын

Sooo....if we take the design from 13:38 and add a second lense *after* the display, can we see the display and the "real" world? Like a lense that is convex between eye and display and a concave lense after the display?

@Waitwhat469 2 жыл бұрын

That is my thinking as well Distort the real world light to match the density and general direction of the display then again distort but this time the combined light of the display and real world back to a parallel display

@MrEmeryHall 2 жыл бұрын

this type of screen would be amazing on a diy vain finder! you would be making a lot of lab tech's, dr and nurses super happy if you could design a portable, light,reliable diy vain finder with this screen

@screwcancerletsrace 2 жыл бұрын

You are very quickly becoming one of my favorite channels. Keep up the good work!

@nebhead77 2 жыл бұрын

Outstanding work, one of your best video's to date. It's clear a lot of work went into that thing that doesn't work. Nice job. (but seriously, excellent science video)

@ThadStarner 2 жыл бұрын

Zack: Thanks for the clear explanation. I'm using it for my Georgia Tech class. One you thing you might cover is the light efficiency of these different optics. One of the reasons it is so hard to get a useful "see through" head worn display for outdoors is the loss of light from the beam splitters. In your example with Glass, the beam splitter is 50% reflective, and the image goes through it twice, meaning that 75% of the light is lost from that process (and then there is the efficiency of the LCOS display). All the "transparent" displays have this problem - some much worse than others. The other problem, as you know from the Moverio you wear, is that the beam splitter looks like a grey rectangle in front of your eye all the time, which is annoying. You can make it less gray by making it more transparent, but then the efficiency is even worse! Grumble. We really need a VERY bright microdisplay. Do you know of any very bright hackable modules? I'm looking for one to put into a scuba mask for our dolphin research.

@rafaeltota 2 жыл бұрын

I vote for "yote", as in: "yoteth thee thy coins towards the screen"

@jameswalker199 2 жыл бұрын

Furries have already taken that, it's short for coyote

@bogeyoffear 2 жыл бұрын

Thou shalt not yeet what has allready been yoted.

@JohnTaylorFPV 2 жыл бұрын

I just had a huge revelation thanks to you! I always wondered why when i dont have my glasses, i can make a tiny hole with my finger, look through it and things are clear... you made me understand what's going on there, thanks!

@col2212 Жыл бұрын

thanks for putting the songs in the video in the description, one of them helped me track down a classic "Tyrone Davis - In the Mood"

@ragzard 2 жыл бұрын

I HATE that I discovered Zack's channel a few months ago. I wish I discovered it much later. That way I could binge watch gazillions of hours of backlog.... All I can do right now is to watch them more than once. Already started this.

@allhumansarejusthuman.5776 2 жыл бұрын

"The know it all's among you think you already have the answer" me, not a know-it all nor particularly bright ahhh colaminated light "Lenses" Nooooooooooooo By the way. Thin film colaminators are a thing and ruin the "put the phone two inches from your eyes demo"

@HerbaMachina 2 жыл бұрын

Ikr, I was thinking this too, it's the best solution for a smalland thin overlay for the optics.

@fennoqueven 2 жыл бұрын

Keep it up, these videos would be worth twice the wait.

@column.01 2 жыл бұрын

Your explanation of why the display doesn't work was genius and intuative. Great video!

@AmaroqStarwind 2 жыл бұрын

Actually, KZfaq demonetizes you if you swear within the first minute. It also counts censor-beeps as swearing. And it will automatically censor automatic captions.

@WolfRose11 2 жыл бұрын

I think it would be able to be easily converted to an armband display so that the materials are not entirely wasted.

@Aerogamer158 2 жыл бұрын

You should see the stack of glass on a HUD to remove all color lengths from the projected image and display only green, but still allow you to “see through” it without loosing any color lengths from the real world view in front.

@chrisjones-fp5vd 2 жыл бұрын

I always watch til the very end to see the patron names lol. Love this channel

@OrangeC7 2 жыл бұрын

In conclusion, transparent OLEDs are literally awesome but HMDs are harder than they look

@m4rcyonstation93 2 жыл бұрын

Why do we have the same interests

@blazehenot2536 2 жыл бұрын

do you have any recommendations for the cheap micro displays that you showed, I need to win a bet with an Air-force fanboy friend of mine.

@nsomething7805 2 жыл бұрын

This video is perfect, no other words just pure gold

@dustinsmith8341 2 жыл бұрын

I really enjoyed your description of light and sensors.

@ethanpoag3746 2 жыл бұрын

What about a collumating layer, that just filters out light that isn't going straight. The light from the world is already straight so it wouldn't interfere with that

@nightlight0x07cc 2 жыл бұрын

Lol, I was thinking, just put a layer of really small tubes on the surface. It'll grey out the transparency a bit, but I imagine it'd unblur it 👀

@nightlight0x07cc 2 жыл бұрын

Even better, the other myopics have been saying, "Put your corrective lenses behind the display, I can focus that close to my face already!"

@xTheUnderscorex 2 жыл бұрын

It needs to collimate the light from the display but not the light passing through (hence the need for beamsplitter and an offset display)

@mattpharois9719 2 жыл бұрын

I hope someone (not me, too much work, unless?) just out of spite invents an OLED-type display that can emit collimated LASER light just because. (Might be good for maskless photolithography if it can be done)

@4mb127 2 жыл бұрын

Nice explanation of optics.

@toamastar 2 жыл бұрын

I actually learned so much in this video! I learned so much about making cocktails ;)

@grahamturner2640 2 жыл бұрын

For me, when I did the experiment with the disk, the disk just became bigger.

@inattentivedemiurge4227 2 жыл бұрын

Quick question, @Zack Freedman, would a truly transparent OLED display be possible if one put a lens on the inner part of the display to focus the display itself... and a lens on the outer part to bring the rest of the world into focus?

@cesarflog2 11 ай бұрын

I was thinking this too! I wonder if that works?

@iammatt3394 2 жыл бұрын

Authentic content like this is rare, even the patreon shoutouts were entertaining

@cate01a 2 жыл бұрын

WDYM!!!?? at 16:04, you just explained how tech like the google glass and your device ARE transparent wearables!! Other than that complete twist, good vid! Really good explanations! Gives me hope that one day there'd be a perfect lense for VR, where there is ZERO distortion, ZERO glare + god rays, MAX fov

@neetpride5919 2 жыл бұрын

10/10 went to Zack's patreon and gave him all my life savings 😵

@ZackFreedman 2 жыл бұрын

Good. GOOD!!

@2aryanpro 2 жыл бұрын

Huh, I don't remember any part of the video where he told us to do that.

@neetpride5919 2 жыл бұрын

@@2aryanpro never claimed he did, but I must have been so impressed with this video I had the overwhelming urge to donate all my money to his patreon

@CollinBaillie 2 жыл бұрын

The video did kind of start abruptly.. no intro or anything. Must have been gaming the KZfaq filtering algorithm or something... I get some sort of nagging sub-conscious thoughts about Zack swearing at KZfaq.. something weird.

@bornach 2 жыл бұрын

All hail the hypnotoad!

@TheBiggyJMan 2 жыл бұрын

Ok, but what if you put a thin polarized sheet in front of the display?

@meercreate 2 жыл бұрын

It's an OLED, not an LCD

@alexandermartin6174 2 жыл бұрын

That is the smoothest ad segue I've ever seen, holy shit and good work

@joshhyyym 2 жыл бұрын

If you wanted to make it work a bit better you could have a converging lens between the display and the eye (as shown), and an additional diverging lens after the display to cancel out the vergence. You would have a different field of view between the eye with the system and without, but the screen and the background could both be in focus

@Salvanim 2 жыл бұрын

What if you have a lens behind the display that makes the light traveling though un-parallel so the lens in front will make that light parallel again, so you get both.

@robjenkins494 2 жыл бұрын

I guess you could if you wanted to do this at home - but the point is that at that point might you not be better off just using one of the other kinds of displays?

@FactoryofRedstone 2 жыл бұрын

I had the same thought. It should work, but you need sufficiently strong lenses. Also your lenses should be flat on one side each so they can touch each other (with the display in between). This is necessary that objects from outside aren't bigger, this would give you a headache probably. I don't know how cheap or expensive this would be, but maybe you can still save money if the other optics are this expensive.

@robjenkins494 2 жыл бұрын

That's the thing though - lenses are expensive. Especially quality ones custom to an application. Just ask anyone with a photography, or astronomy hobby, or anyone trying to buy prescription lenses without insurance. To your point - What you're describing is in all likelyhood theoretically possible - but that doesn't make it a good idea and you're adding so much extra custom optics, that you might as well go with the existing tech.

@FactoryofRedstone 2 жыл бұрын

@@robjenkins494 I just wanted to say it's possible. I don't know the price of lenses, nor the price of the other optics. Also prescription lenses will be made for you in particular, with makes them so expensive. If one wants to do that it's probably best to figure out if you can get cheap lenses first and then design the rest of the project around the lenses.

@Salvanim 2 жыл бұрын

@@robjenkins494 This dose not work when you want there to be no clunky projectors or mirrors on the side of you device. My idea would be to build a functioning computer into the glasses itself, which is possible with technology we do have, such as the small computers in watches and other devices. For control you could either use the gloves like he dose or with more money you could put EEG's around the glasses. How glasses are structured could allow for perfect airflow over all the components with small fans, or even just air holes and proper structuring that would create convention currents though the glasses. You could even create basic programing that will combine the power of other glasses users. Power could simply come from your own body-heat as well.

@moshimoshibar 2 жыл бұрын

what if you added a second lens on the outside that was concave, then wouldnt it bring the environment back into focus?

@thepizzaguy8477 Жыл бұрын

after testing it in a simulator, yeah i think so

@anthonymonge7815 2 жыл бұрын

This is my first video I have watched from Zack. I feel the stars have aligned to provide me a window into my personality-doppelgänger. That is, of course, if I could overcome my anxiety and my high level introvert ness (is that a word?).

@ZackFreedman 2 жыл бұрын

I'm anxious and extremely introverted. Nothing will ever overcome it. You just need to bull through it and fight until it gets you, then wake up the next day and try again.

@Lozoot2 2 жыл бұрын

For future reference: (Present) I _yeet_ (Past/Imperfect) I _was yeeting_ (Past/Perfect) I _yote_ (Pluperfect) I _have yought_ (Future) I _will yeet_ (Future Perfect) I _will have yought_

@blanana_m 2 жыл бұрын

I think it is pretty good and doesn't suck It is just big, too close to your face and looks like shit Oh well it sucks

@louisdalibard818 2 жыл бұрын

Ok but put a concave lens after the display and it's fixed.

@AdrickBruno 2 жыл бұрын

Thanks for the knowledge, incredible jokes and for the skillshare month... ( I'll forget all of them tomorrow but it was great lol)

@_kalia 2 жыл бұрын

Have you tried making a pinlight display? It was a technique I saw a SIGGRAPH paper about several years ago placing a grid of pinpoint lights (a side-lit plate of acrylic with tiny indents in to make glowing points) behind a transparent LCD and then doing some form of preprocessing to render unfocussed sections of the image that the pinlight then shine through and bypass the need for the lens.

@ToasterWithFur 2 жыл бұрын

Obligatory first

@broogz 2 жыл бұрын

actually first this time

@harshitgupta6856 2 жыл бұрын

Nice

@RoseKindred 2 жыл бұрын

This is really cool. I wish I was smart enough to think of how to do this.

@tristanbouchard9997 2 жыл бұрын

I hope that "Good Suck" guy never changes their name. I love listening to Zack say "gud succ" every time

@aaronemerick2719 Жыл бұрын

Found you via the 3D printer filament reviews, subscribing for additional nefarious hijinx. Great content.

@avejst 2 жыл бұрын

Interesting project Thanks for sharing :-)

@tannimkyraxx 2 жыл бұрын

On the other hand it looks like you can see fairly well past the blue blur in which case this could look really cool as a effect in a cosplay or cyberpunk fashion display. if it'll display patterns and scrolling text that doesn't get in your way too much and can be seen by others looking at you that has some interesting potential.

@cod.liver.failure 2 жыл бұрын

UTC! thankyou. double timezone conversion is hard!

@agnel47 2 жыл бұрын

Thanks for resting the case I didn't know needed resting.

@kaizadkotwal12 4 ай бұрын

you can use a convex lens toward the eye for clarity of the display and use a concave lens of the same focal length as the convex one behind the display, this should solve the blurriness of the foreground as a diverging and a converging lens of the same focal length cancel each other out,and if you use a plano-convex and a piano-concave lens the glasses will become slimmer but keeping the cancelation power the same and if the user has myopia or hyperopia then they can change the focal length of the lenses to suit their condition, and (this is speculation but) won't this stop other people from seeing the displayed content unless looked at from a specific angle or distance as the piano-concave lense will scatter the light coming out from the other side.

@diyelectronicsguy 2 жыл бұрын

Man I liked this, educational and funny.

@Enderbro3300 2 жыл бұрын

That intro had me on the floor oh my God XD

@posidonentertainmentcompan8490 2 жыл бұрын

My brain immediately came up with the idea of using a jewler's loop kind of set up in order to compinsate for the lens issues, though how successful that approach could be is completely beyond my means, I hope you might try it even if it doesn't work at all.

@Corianas_ 2 жыл бұрын

I had hoped that Fresnel lenses could be used to straighten the light both before and/or after entering the screen. Or to be able to have the 'pixels' be out of focus enough that they would work like those 2d "magic pictures' where the image doesn't work if you are focused on it but do if you are focused beyond it. Were I to use a larger screen and have it further away, how far would the minimum be were I to make a Master Chief helmet with HUD inside? Or fallout Power Armour?

@justinw.charles1327 2 жыл бұрын

Dude bro. I would not at all mind flipping down a lense every time I want to look at my HUD x3

@CriusDigital Жыл бұрын

Great video man!!Nice explanation of optics :D Is there any chance that you have Greek Origin?

@greg-gq1ug 5 ай бұрын

i did your hypno disc thingy experiment about an hour ago, and I cant stop drooling.. thanx jerk.!!! 🤣🤣🤣🤣

@sergentti 2 жыл бұрын

You did teach me something cool. I can see individual pixels (with my glasses off), when I put my screen against my face.

@sabertoothanimations2912 2 жыл бұрын

Well, i would say it would be stooped to expect it to work even after that existed exploitations to prove it doesn't work, but the item can and i'm sure will make a Cool Cosplay Item as i would probably end up using it if i had the mist to do so. keep up the good work and i will be coming back to see more ;3

@tzisorey 2 жыл бұрын

I should give this a try - I can see the reflection of my own eyeball in the inside surface of my glasses (I'm *_that_* short sighted) - so it might actually work for me.

@ayvee1879 2 жыл бұрын

awesome explanation :)

@Jon-yh3gb Жыл бұрын

I was thinking "i am nearsighted enough for this to work" and completely forgot about the glasses also needing to let you see the real world.

@juancoboj2968 2 жыл бұрын

You should make a fully functional computer with wearable splitted keyboard that you can wear and un-wear when not used and a mouse that works without having to detatch your hands from the keyboard. Like using the movement of your head and some other part of your body as a point of reference and a key on the portable keyboard so that you can click. That i've never seen and it is something that i'd even buy. Like a laptop but better. Loved your videos. New subscriber here. Leep it up.

@ZackXa 2 жыл бұрын

Someone else already answered why polarizing the light wouldn't work but it would have been cool to cover that as well. I'm curious if it would be possible during the production of these things to have some way of having each pixel be able to become opaque or something, would that work? What if the pixels were significantly smaller?

@ateci0 2 жыл бұрын

I appreciate you letting me build whatever I want no matter how stupid it is. Thanks Zack!

@relativisticvel 2 жыл бұрын

Sounds like you need a thin Fresnel lens between you and the display to columnate the light.

@_inetuser 2 жыл бұрын

great informative vid!

@tugaric 2 жыл бұрын

Optics physics put a shiver down my spine, but this was really interesting 😅👍

@ethanhartle8548 2 жыл бұрын

This would be awesome for a Borg Halloween costume though. The wearer would see a haze but a bystander would still be able to make out an alien gibberish language

@shitfaced6585 2 жыл бұрын

Great as always

@daltonjones3143 2 жыл бұрын

that hypnodisc had me until I had to actually do something 😂

@thewolfstu 8 ай бұрын

16:19 I know it's a dumb idea, but I'd love to take a crack at this where you pancake the display between two lenses, one lens front side to fix the display and another on the flip side to fix the pass through, but I do also feel like that'd probably end up more like techno goggle displays.