Thank you for the review. I too have had the same Ulterra you feature in the video for the past 2 years and it has broken 6 times... including the first day I used it.... always the trim module that breaks... my warranty is almost expired so I have switched to Terrova... they auto deploy on the Ulterra will spoil you but mine was in the shop as much as it was on my boat

Thanks for pointing out the trim problem. Seems like they would do something to fix that going forward since the Riptide is made for salt water.

Thanks for the info. Just bought one and going through the learning curve

Great review brother!! I was wondering how it did for you since I know you guys put hours in. That auto stow and deploy is so temping, but reliability is the most important thing for me. Minn Kota has always given me nightmares. I’ve gone thru dozens. I eventually switched to MotorGuide when they came out with the Xi5. It isn’t very sexy, but it’s deadly reliable. It’s been on 3 boats in 4 years and still purrs. Great job!! Thanks for posting!

Thanks for the tip. Yes, had exactly the same problem recently at 14 months. Belt was stripped as well. Was thinking of making up a cover to keep salt air out while berthed but will now follow your advice and store vertically. Any updates would be most appreciated.

Thanks for the Info, I'm getting ready to put an 87 Inch Minn Kota on my 27 Sea Hunt, I was told to stay away from Rhodan since they are made in China, Not too sure about the Motor Guide but I think I need at least an 84 inch for Offshore, I also saw the Taco nav light video which I also have to do.

The main problem about trim module is that contact point underneath, the circle connector didn't do well-preventing waters goes in and make corrosion time by time to the positive and negative wires. I got my friend need to re-welding those wires to the connector disc for over 3 times last year, and finally I know I need to clean every single old solder by using high watt solder iron keep heat up those old solder and make it out of the disc, make sure the surface in "PERFECTLY CLEAN" conditional to re-weld the wires on it. I use lead solder and rosin paste for good results, just like the video about soldering wires by ChrisFix. Then using high-quality silicone to seal all those connections points for better durability. The other Ulterra easy fail point is the cylinder at the port side of the base. The symptom is when you tilting up or down the motor it will shaking up or down, then you might need to take a look with that cylinder, both thread in plastic parts may damage and come off from the cylinder or simply broken. If so just take the parts to some shop to buy the same one to replace it, or go to replace the whole cylinder part. If you didn't care about this the motor at the starboard side will break afterward, by the cylinder works as assist and distributed weight when Ulterra tilting up or down, the main motor was heavy and every pound of weight force to the motor and break it. Hope you guys enjoy this and stay safe on the water!

Shouldn’t you put the heading sensor on the rear gunnel of the boat with direct line of sight to the motor head. Gives the boat the longitudinal information to keep the boat in the directional orientation you want regardless of current or wind?

Thanks. Helpful!

Thanks so much for this post. I'm going to move my purchase to a Terrova after seeing your video, reading other reviews, and talking to my installer. One big question is where exactly did you mount your batteries? I have a Sea Hunt 225 Ultra and it looks like I may have to give up my portable head area in the console to a false floor to enclose the batteries. Any info or pics appreciated! Thanks again! Henry

You put your puck in the wrong place brother. Needs to be near the center of the boat to really take advantage of it. Keep in mind it is take ing a bearing measurement to try and keep your boat in a particular orientation. By having it right next to the troller motor you might as well not have it installed.

A $500 repair is unacceptable. Think I'll pass and buy a Rhodan. Thanks for the review.

Why should we have to pay for repairs on the tilt if they knowingly acknowledge that there is a flaw in the trim where water won't receed. I've had mine for two weeks and I am having trouble with the trim

Thanks for the info 😎😎😎

I have a chance to buy a 2021 112lb 36v ulterior new trim module installed. White mounting system and plug/receptacle for 1600$ this a good deal? I’ve seen it work.

Do you regret getting the ulterra vs the terrova? I'm on the fence between the two, but leaning towards the terrova. Seems there are more reviews of on the ulterra going bad after the warranty period. Anyways, Thanks for taking the time to make this video.

scallen2112 hi, I’m getting a 25 foot bay boat. What trolling motor would you get knowing what you know now? Any recommendations on the garmin ? I’m reading reviews on the auto deploy and trim and they are just god awful. Most of my fishing will be in inlets or off shore. Any feed-back would be great. Do you think 60 inch shaft would be good enough and 80 pound thrust? I don’t think I can fit 3 batteries for a trolling motor otherwise I would get 100+ thrust. Thanks

Adam - I've got a Ultra 210 - do you think a 60" would get by or should I go 72"? Thanks

What is the purpose of the black pigtail connector hanging near the power cord??

I'm considering one for my 17" Arima Sea Ranger. I have to climb up and out to the bow to deploy and stow my current Riptide. I noticed you pushing a power button on the unit's base. Do you have to do that even if you leave the motor connected to power between trips? With my current motor I can either leave it connected to power when not in use, or just connect the power at the beginning of an outing and pushing any key on the remote activates the motor.

Does that long unsupported 72 inch shaft bounce around when you are underway or trailering the boat? It seems like it would vibrate loose at some point.

I have a similar CC and was looking to get the same Minn Kota. I was wondering if next time your out you can provide the speeds you achieve on a 7,8,9, and 10 speed setting. I know this various depending on conditions. Any info would help and be greatly appreciated! Thanks

I have a SH 234 ultra also. I really want the auto deploy as I mainly fish alone and it would make many things much easier. If I keep the screws and bolts clean and free of salt, lube the belt, and store so the trim motor drains, will it work as intended?

Curious about the trim .. if it is deployed in shallow water , does it stop automatically? Did anyone mention the benefits of lithium grease on that belt? Thanks for the video

I have a 19" Kenner came factory with a 48" Riptide. Do you think the 54" is sufficient? 99.9% of the time it will be in fresh water so no big swells.

I just pick up the same trolling motor like yours. Do these Riptide Ulterra automatic stow away when battery running low while using ? Thanks

Good review

I would suggest anyone seeing this video and having similar issues to watch this additional video (kzfaq.info/get/bejne/hpmhm8V5spPGZ6s.html). It talks about how to maintain the areas of concern with the saltwater Ulterra. It would seem to me that Minn Kota would a) explain this needed maintenance to anyone buying the Ulterra, b) make it easier to access (for maintenance and for simple flushing). The maintenance explained in the video seems crucial to me. 🤷‍♂

What ah batteris do you use

What quick release bracket and model . Thanks

Can it tilt before it trims? For instance if you need it to clear a bow rail?

Have they fixed the trim motor problem with the newer units?

Other than the trim how dependable has this motor been and have you ever tried to grease the belt

I have heard the main electronics board will go bad if charged plugged in. Any experience with that issue?

You say water got inside so you store it upright. Is it the head on the top of the shaft that water got in?

Bonjour 3 ans et j’ai changé le moteur de la trim

I just bought one and it failed on the third use I am returning it.

Hi ,I'm thinking about purchase same one you have, is it recommends?

Is white salt water or can u use in fresh to

Good afternoon. When turning the engine to the right, it makes much louder noises than when turning it to the left. What can it be? Here on video. ://kzfaq.infoqCgITsiLa8g

MINNKOTA ADVERTIZES A 2 YR. WARRANTY, YOU ONLY GOT A 1 YR WARRANTY????? SUMPTIN' "FISHY"