Hope this tutorial comes in handy! If you've made any improvements, or have any questions, feel free to post them here in the comments! Also, if you haven't seen it, yet, be sure to check out my Redstone Bathroom! kzfaq.info/get/bejne/bJZ0mshj16vcYYk.html

I have spent roughly 8 hours trying to design something like this, and I finally found the missing component, inclined hopper minecarts! Thank you so much!

Man, the way you explain the problems at the beginning with the different builds is PERFECTION!! Well done

I used to play on your server, I started watching you when I was 9, and I'm almost 17 now, lol. I still have pictures of my old Island from Pandacraft. Hope you're doing well.

Built this in my bedrock realm and was able to use the single wide design but was required to space each one by one block because of the Cardinal direction default rail snap mechanic can be done but only in one direction, corners become quite challenging to fix. Also note that anywhere you place a vertical hopper you can instead use a hopper minecart to give you an overflow buffer for your system

How does this not have more views! I've been trying to figure out how to fix the overflow problem with the standard design for a while now! This looks perfect, can't wait to try it. What kills me on the base design, if you try the water delivery and one of the sorting hoppers gets full it can flush all the surrounding hoppers because of the redstone signal. This will be a huge fix to a massive mining project I have.

A minor improvement to solve item speed on ice issue: If you put a bottom slab instead of the trap door, the items kinda "stack" as they hit each other (if the same type) while hitting the slab, until they float high enough to pass above it. As slabs are not a full block, items still slide on it if there is an ice below. You just saved my server from the lag of my mobtrap, thanks!

Thanks a lot for this design, was exactly what I needed for my gold farm where single hopper speed was simply too slow and the system got clogged in like 5 minutes with rotten flesh/gold swords. I used the 2-wide design and added extra storage with double hopper speed. I also didn't tilt the hopper minecarts on detector rail, because my design needed it to pick up items from both sides of the item stream - this didn't cause any issues and the hopper minecart below still sucked the items into the storage chests. As I built this in the nether I used sn ice path with sticky piston and slime block to push the items to the sorters while using two droppers spitting out the items in front of the piston. When doing this design make sure to prepare enough space, I had several issues I had to overcome because of lack of space and was too lazy to rebuild everything on platform few blocks below. Will definitely upgrade some of my sorting systems with this whenever I need extra speed.

amazing design! quick tip for my OCD bros, use 3 glass pane/iron bars to align the minecart perfectly centered

Currently building this farm in 19.3 and man this system is sweet. It also saved my ass. I was building Eyecraft's farm and I cant tell you how many issues i had: whether it's severe lag or the system simply breaking and me having to go in and fix it every time. This sorter can handles so much volume, don't have to worry about messups any more! this design was also very easy to fix over my old storage build that was barely working. Also added 4 chests below for extra space Thank you so much for the straight forward and easy tutorial!

Thank you for including explanations for how the mechanics of the system work. A lot of other videos just show you how to build something - you taught me how it worked along the way and I really appreciate that!

Cracking idea. Never knew mine cart hoppers were so much faster.

Dgmw but i never thought i would watch an 18 min video just for a sorter system. Really nice video and good explanation.

Thank you so much for this, i dont think i've ever learned so much from just 1 minecraft video before

Thank you! works perfectly on my gold farm on 1.18.1. oh a little thing to keep in mind, remember that in the minecart below there are activating rails, not powered rails... I lost half an hour with this problem because the filler blocks were absorbed instantly hahaha

For anyone wondering this does work on bedrock, the only downside is that you can't place them side by side because of the how the rails connect, so you'll have to space them out by at least 1 block

Ingenious! This is great, man! I'll have to use this the next time my buddies want a sorter. I always build the machines haha

For everyone wondering - This WILL work on Bedrock 1.18.10. For the item filtering part, I took a stack of dirt and renamed it. I started off with 11 in each of the 4 slots, but wound up with , 8, 11, 11, 11 at the end. For the item being filtered, it kept 1 crimson plank, and 3 redstone dust - so it seems to vary a little based on the item being filtered. A few notes: 1. The lower minecart with hopper stayed flat for me, but this did not seem to make difference. 2. I was not able to get a second minecart with hopper placed on the lower block - not sure if this is just my missing the hit block or a limitation of bedrock.

Thanks for the design. I used it when remaking my flower farm (due to flower pattern change in 1.18) to separate out the seeds and flowers. I didn't use droppers, so it was a big clump of items hitting the sorters at once. While I still made the water cycle, the amount of times it cycled was far less.

It's great to see you back!

OMG!! you are a life saver!! i have a system in the end which because auto concrete factories didnt work in 1.20.1 (turning concrete from sand duper into concrete automatically) i had to auto sort the concrete from sand i was duping and then put it into a manual concrete converter and with 2 of the 36k duper farms running it immediately backed up completely! the storage system i had didnt back up too badly cause it was designed for bulk items but because of where i buil the concrete farm i only had about 4 blocks and a single circular hopper didnt work. thank you so much!!!

this is so helpful for my absolutely ridicilously overpowered raid farm in my hardcore world, thank you

Awesome video, man! Super helpful. Been referring back to it lots! You made a comment that you can use a regular rail, but I tried it and it curves into a corner rail, so I think Activator Rails are still best for the middle level.

The 2-Wide one helped me with dividing stuff into 4 on my super smelter. Thanks!

Thank you this is a very handly sorter for bulk storage systems... However... There is one small fault, which is a problem for ANY water stream feed sorter (not just yours). If there is a whole stack of items (64 items) then no single sorter will pick up the whole stack! You will need at least 2 sorters to pick up a whole stack. But at least your sorters reset fast enough that you don't need 3 or more sorters to handle such a load!

The two wide one works in bedrock but you have to get the minecart into the sand differently. Place fences on the side you don't need to place rails on later, put the minecart on the other side, push it into the middle, and then use pistons to push the sand over the minecart.

You can stack down in a similar way more minecarts to buffer, or if you have enough hoppers reposition things so that two hoppers pull and feed through a chain. with bedrock you need to make sure that you don't accidentally put things on a chunk border since minecarts and chunk loading/unload in that version is very buggy.

Thank you too much, it was the best desicion for some minecraft servers to avoid bug and lags of hoppers, your design based on minecarts with hoppers solved my problem. Thank you too much again)

Dude. you just broken the Mojang game limits! i thought the only way was making many lines of traditional sorters. but here i´ve learned something new

brilliant. was looking for a way to improve my gold farm to not have nearly as many sorters just to fill shulkers and this looks like it'd do it, and i can see myself using it in other farms too, if not my actual sorting system. definitely subscribing based on this :D

Nice tutorial, with great explanation. You can double the hopper speed on the one-wide version exactly as you do on the 2 wide version (just tested in 1.19) Placement can be a bit tricky, but it works. Place blocks on either side of the hoppers so when you push the cart it doesn't shift sideways, and use an iron fence over the hopper without the rail, and push the cart into it. remove the iron fence and temporary blocks after. Using the gravity blocks on the one side that already has a cart placed works perfectly. The rest goes exactly as your tutorial shows.

Thank you so much man i spent ages with normal sorters just clogging up then dumping out the filter items and breaking but this one hasnt done that you saved me from crashing the server again lol

Just built both of these on the switch (bedrock). Both work great BUT the 2 tile wide seems to be directional (east to west not north to south), the 1 wide works both ways, weird 😋. I used regular rails for the middle rail choice to get the rail to face the right direction and it works great. Thank you for sharing such a simple yet elegant build 😁subscribed 👍

Great video, thanks. This works beautifully in Java 1.19.3. In case anyone else has this issue, I did have a small issue with alignment of my item flow. Items were running on a slight diagonal and not being picked up by the first module. You need to make sure your items are coming in from the dropper line fast enough to actually hit the chest to be aligned properly.

I am seeing this in 2024 when I thought all hope was lost, but trying to stack 2 layers of different item chest with this one was a pain without having to use a million hoppers, but i figured it out, thanks

awesome design that I'm using on my skyblock world, substitute the walls with end rods that doesn't combined like walls... plus light 😊

never have subbed faster in my life, this is genius

Biggest issue on bedrock is rails not snapping to where you want them, fix: make the line of activator rails first, then place the other activator rail on hopper and detector rail above, this will put the rails where they need to go

the 2 wide design is very good, but at least in 1.19 the one wide tileable can break when the items move in a loop and multiple stacks of the same sorted item gather; the two hoppers will eventually pull the filler items from the one above

Hi, Thanks for the video. I started a item sorter one our server and maked that old one, with only hopper and we were missing a lot of items/speed. I've followed every step on a 'lab' world and then maked on the survival. It worked perfect! Again, thanks! =D

Just used this design of item filter on my gold farm on bedrock edition, getting upwards of 70,000 nuggets an hour and this item sorter works perfectly, thank you

Omg! That’s epic! I wish I found this before I spent 2 days building and troubleshooting my current double farm…. Maybe I’ll do this upgrade next week when I’m less burnt out with it. A note about the wall width, if the asymmetry bothers you, you can place torches all along the wall so each section has that pylon bulge. This will also slightly decrease lag because the engine won’t be working on shifting light levels as items are processed in each section 😸🤘

This is really useful, thank you! Take my subscription

Built this to my Witch farm in 1.21 (Java), works perfectly. Had to put the waterstream one block away from the dispenser, otherways you get water bottles instead of empty bottles. Edit: Or use Dropper instead, I leave this comment here if anyone else makes the same mistake :)

You are able to double the output speed of the 1 wide tileable the same way you do with the other but on 2 hoppers instead of 4

with single ones, it is better to keep a distance, because the signal of one mc-hopper (signal over 3) interferes with neighboring mc-hoppers. Very good material :)

I'm on bedrock and had to use the 2 wide for my guardian farm because the buffer trick doesn't work so my bottom minecart hopper clogs, but it works perfectly! thanks for this!

Exactly what I was looking for. I'll build it and test it. Thanks.

I absolutely loved the tips and tricks at the end And how to build it

Bro this video is exactly what i need, thanks for this great video

can you make a tutorial for one with multiple chests in an area? where you can store in many different chests

Very good video, the explanations are perfect. Thank you a lot !

I found this accidentally and found out you were actually blackbeltpanda. Wasn't expecting to find you again 10 years later. I actually found a comment of mine from 10 years ago lol

For once someone who actually EXPLAINS redstone, instead of just building and saying " the redstone is super easy ".

The king is back baby!!!!!!!🔥🔥🔥❤️❤️❤️

thanks bro you saved me i just built a wood farm but the items were too fast for the regular hopper system, i built the 2-wide its great

This sorter doesn't work with 16 stackable items such as buckets and ender pearls. Any way to make it work? Using it for my gold farm and gold trading farm combined. 1.18.1

This wasn't what I was looking for... but great video and I will certainly be using these designs in the future.

I'm really confused why I've never seen (so far) someone who has a configuration of 1-11-11-11-11 (1 is the item to be sorted and the 11's are the renamed items/blocks) in their hopper filter. They would still add up to 45 and the 46th item would trigger the redstone and go to the chest. You just used the least possible item-to-be-sorted in making up the 45 so 63 more can go in without getting past the hopper filter. Ofc, this would not make the system faster but it would avoid clogging and the need to input the excess items in the system over and over again. Please correct me if I'm wrong.

GG`s That is what i have looking for some time. Awesome upgraded ImpulseSV`s sorting system. And also thank u for simple and clear explanation rest stuff about this system. Old guy like me sometimes can`t get game mechanics clearly and other youtubers sounds like language for those people, who knows everything already lol.

Did not realise that the hopper carts could replace hoppers. Nice!!

This is great. Thanks!

Amazing! Exactly what I needed! Thank you!

Great design!

I think I speak for everyone when I say that we miss your let's plays

Works in Bedrock 1.20. I did the single wide one, but no matter how I oriented or placed the rails I couldn't get the lowest one to stop snapping to the next one on the hopper (yes I tried the tips at the end of the video). I just left a gap between them and it works marvellously for my guardian farm

This was a huge help! Thanks!

HE RETURNS!

I've solved this whole problem by simply adding two double chests as a buffer in between (I've built a 564 items autosorter in three floors, a smelter with 26 furnaces, a bamboo- sugarcane- pumpkin- melon- and cactus farm, a mobfarm, two spawner farms (skeleton and zombie) and a chicken farm). I even did a stresstest on it and it works. Nice invention though, but a whole lot of trouble which is solvable by only adding four more chests to the conventional system.

Gonna have to try this on my overworld portal gold farm. Right now I just have a standard sorter, hopper minecart pickup to a line of hoppers, with an extra sorter for each item, meaning 2 for gold nuggets, 2 for ingots, 2 for flesh, and the swords go into a quad smelter. My kill chamber is a drop to 1 punch kill but I replaced punching with a trident killer, and it kills zombie piglins REALLY fast. The problem, is too many items too fast. Especially if I use the “hold a looting 3 sword to apply looting effect to trident killer” trick, It ends up filling the front hoppers with nuggets/flesh, locking the hoppers on and draining all items from the sorter. Usually takes about 20-30 min to happen, but it does happen. Sometimes a nugget or piece of flesh will make it past all the hoppers into one of the blast furnaces, which is why I have 4 so if 1 gets locked up the others still have no problem smelting swords. It seems this method will save both time (unclogging) and space (from a 6 item filter with overflow to a 3 item filter with overflow). I’ll definitely give it a shot.

14:30 Im on the 1.20.72 update on bedrock xbox. However i put the slab activator rail first then the hopper rail as u did by block by block and the rail next to the hopper minecart rail keeps switching side ways on the bottom and its not working right. Does it have to do with the update?

He's back!

You are a genius

I love to have these in my world, I'm just not use to using redstone. After all these years I'm still more of a builder then the redstone side of the game.

bro this video just may have saved my life, i have a gold farm with a smelter that keeps pushing what i dont want into the smelter making the smelter to stop i hope this still works, about the second minecart on the rails, we re no longer able to put more than one minecart in the same rail

Dang bro. This is awesome. Thank you

Nice tutorial, thanks. Will be great for my dripstone farm which produces about 6 stacks once a day. I want to feed it to a shulker loader but need to filter to ensure rubbish (glow ink 😒) doesn't clog up the system

Brilliant design, gonna keep it in mind for future item sorting times. It's not gonna help me for my specific use case, because I need the EXACT number of a filtered item, but for regular storage applications there's no real issue with this design.

this is sick af

After creating my storage system i got somehow presented your video :D Now i have to rebuild ffs :) But a question: Instead of using a chest + ironbars is it ok to use honeyblocks as well for alligning? EDIT: Is it possible to use it for 16 stackers too? Like buckets?

This is an awesome design! The only issue I have with this is that the stacked minecarts create a noise that becomes pretty loud with a lot of those sorters next to each other... oh and I just noticed, that the minecarts pop up onto the middle rail after a few minutes all at once. I tested it a bit and it looks like putting them directly next to each other is the issue here... cuz with one block between them, the sound doesn't exist and the carts don't pop out either. I'm on 1.18 (Java) if that makes a difference

simple explanation and easy to understand. my guardian farm is too efficient, hence i need something to import and export it fast. will try this and share my result

SO UNDERRATED

Excellent tutorial!

Thank for the great tutorial. I tried with the top minecart sloping as in the video but it never picked up any items from my water stream. I pushed it back up on the level and it seems to work fine so not sure why it needs to be pushed over and sloping against the wall. I ended up with a hybrid of your two approaches with 1-wide tiling but with a minecart in sand over two hoppers giving double speed delivery to the chests.

Man.. thanks a lot.. you just solved my confusion

This was actually useful, but the problem is: item collection itself, I have a 2 wide looting 3 killing chamber and item drops are so fast that collecting all of them is a real mess.

YAY! worked in Bedrock 1.19. sweet, your the bomb

Thanks alot for the tutorial!!!

On bedrock i don't know if this works. But I tried making a distribution system to evenly split the loot into 4 parts, each to an small, independent storage with items sorting. It's really expensive, but works fine

The minecart in the gravity bloc on the 2 wide won't pull items from the hopper minecart about it even tho the Redstone torch is turning off and unlocking the hopper minecart. Do you have any idea what to do about that

crazy how we both have the same item sorter hall xD

How exactly would you go about stacking more chests underneath the 2 wide version, while maintaining the speed?

Thank you! I made bamboo farm recently with flying machine and saw that normal item sorter cannot keep up with production speed. Question: using two hoppers on double chest to transport into another double chest will the speed be twice as normal? I'm using bamboos as fuel for super smelter shared with my friends and one of them decided to smelt a truck load of netherrack, my first piston bamboo farm ran out of fuel really fast

Very helpfull, thank you very much!

Brilliant! Still works Bedrock 1.20 (the 2-wide one at least)

Can items despawn if you don’t load the chunks with the ice anymore? Great vid!

nice tutorial!, helped me with transfer rate. is there a way to have item transfer into dispenser at faster speed?

Put a cobweb on the dispenser face. Then you'll build up stacks of the three dimensional items before they go into the system.

I'd love to see you remake this using the new boats with chests, apparently they can fill 8/9 hoppers at once due to hitbox