Will an ABANDONED Mustang Project Run After YEARS of Sitting?

Рет қаралды 32,381

Ай бұрын

GRAB YOUR NINEONINE APPAREL HERE!
SHOP NOW: www.nineoninespeedcompany.com
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Check out these Classic Uploads!
-Open Headers High School's Reaction!
• Open Headers High Scho...
-Pulling A Rare Jeep From The Weeds!
• Pulling A Rare Jeep Fr...
-My F100 NASCAR Conversion Is FINISHED!
• My F100 NASCAR Convers...
-My F100 SHUTS DOWN AN IMPORT MEET!!! CRAZY FIRE
• My F100 SHUTS DOWN AN ...
-We Found a RARE SVT SUPERCHARGER In The JUNKYARD! Best Junkyard Find Yet!
• We Found a RARE SVT SU...

Пікірлер: 77

@heelandtoe_ Ай бұрын

So rad to have you onboard this project. I can't wait to see you pump out another crazy high-revving small block for this thing! Plenty more exciting content to come.

@garrison2574 Ай бұрын

Damn this is awesome. I love both of your channels individually so seeing you guys work together has me stoked.

@cameronkendall9113 Ай бұрын

Not gonna lie. Seeing an old muscle car on this channel again makes me want the galaxies back sooooooo bad😂

@PRIVATEpastry Ай бұрын

This video series is going to be the best one you’ve done to date. Here for it.

@ThePower1037 Ай бұрын

Love the Beamng Dakar ambience!!! Lol.

@dillondavis2550 Ай бұрын

In highschool I bought a 65 Chevy C10 out of this guys yard and he said it was a deer lease truck and was sitting for the last 20 years. Me and my step dad took it home, hooked a gas jug to the fuel pump temporarily and a new battery, fired right up and ran down the road shortly after. It’s amazing how reliable these old vehicles and engines are.

@ryanlee6881 Ай бұрын

my dad bought a 79 k10 for $400. put fresh gas in it new battery and it fired right up and drove home.

@mpowers56 Ай бұрын

Marvel’s mystery oil will bring those lifters back to life quicker.

@Lesterman_1 Ай бұрын

Stuck valves are quite common on Old small blocks that have sat. You should check old engines for stuck valves before you try to start them or it could set you back some parts.

@thompsonwelds Ай бұрын

You shouldn't have to jump the solenoid from one side to the other. Just jump from battery to starter post on the front of it

@nickmcminn2137 Ай бұрын

Yup first and second post 🤦

@thompsonwelds Ай бұрын

@@nickmcminn2137 then you don't weld your pliers permanently open

@marksearcy9708 Ай бұрын

Great video, Can't wait to see where this build goes.😁👍👍

@AndyKruseChannel Ай бұрын

This is going to be a great build and I'm excited to watch this upgrade process with Craig involved. :)

@peterx213 Ай бұрын

Been a fan of heel and tow for a while now. Cool collaboration. Can't wait to hear that Mustang scream!

@user-iy7yb1sh8g Ай бұрын

Very cool! It looks a lot like my '64.5 I'm putting back together. The whole suspension is almost ready to go back together. I'm putting a 302 in mine.

@bobmanzi7712 Ай бұрын

it is nice to have good friends you are a lucky man. great stuff thanks

@Reddog08 Ай бұрын

Had a 64 falcon w a hypo 289 in it. Loved that car. Built it with my Dad. It would twist the nose when launching..... was great. Rowdy to say the least....289 will Rev like crazy

@Arussorossi Ай бұрын

f1 driver, mechanic, youtuber, who would have thought that Valtteri Bottas would be such a complete man....jokes aside I love your content you produce 🤟🤟🤟

@adriansantiago677 Ай бұрын

Thecraig909 is my favorite youtuber. I love all of his videos and he is such a great guy! Please make a video where you put a viper motor in a miata! Thanks.

@1stAxelKain Ай бұрын

Looks like this will be a fun path to follow! I'm betting it's either sticking valves or pulled out rocker studs causing all the slop!

@Heatshieldproducts Ай бұрын

Great content. I feel smarter after I watched this.

@derrickaustin8273 Ай бұрын

You the man Craig!!!

@tonyscherer8281 Ай бұрын

Thank You I'M 72and still love a 65-66 Mustang

@luckent47 Ай бұрын

Very cool! Save all the stangs we can! Americans never show the palm when we show. Cool episode

@garycook2355 Ай бұрын

Craig, you are right to not use this engine, trans combo. Even if the block were .30 over it still wouldn't be a good idea. If that is the original engine it would be a 5 bolt bell housing block which is incompatible with 66 and later engines which have a 6 bolt block which later blocks right up and through 5 liter and 351's are. A 351w engine and a tremec or t5 would be a perfect combo for this build.😎 🏁

@nickmcminn2137 Ай бұрын

My 65 has a 1987 5.0 with original 65 c4 trans and it bolted up fine. Blocks are the same 64-92ish

@nickmcminn2137 Ай бұрын

Lean pop? You have a few stuck valves. You can see it puff out of the carb each revolution. Thats also why there is slack at the rockers. Just had a few valves not shutting all the way

@tinkerne-round4079 Ай бұрын

What the hell happened to the Galaxies??

@JohnnyAFG81 Ай бұрын

Nice! The Mustang looks nice and clean.

@1DjScarface Ай бұрын

Prime the pump and 3-4 caps of gas in the carburetor normally starts it right up on cars that have been sitting

@robertobuenrostro2781 Ай бұрын

Nice T5 Mr. Milto. 👨🏼‍🔧

@d.l.b3452 Ай бұрын

Fantastic video. One of your best 🧐🇬🇧🫶👍

@surferj0e Ай бұрын

That’s not syrup in that carburetor, that’s MOLASSES!

@greggoett Ай бұрын

Craig building a 289 AGAIN. What could go wrong..... this time

@jdedmnds1 Ай бұрын

Does it have a vent pull handle under the dash with a letter A on it Also pour some water in the cowl and see if any runs out the bottom of the dash. Your lucky the stuff in the carb is still liquid.

@isaacpsi Ай бұрын

This thing is going to be so sick

@iscariotproject Ай бұрын

seem more invested in filming and playing with the phone then the actual car

@user-jj5zz6xh1p Ай бұрын

A high revving boss 302 with a set of chi heads would be awesome

@jdedmnds1 Ай бұрын

Maybe the valves are stuck open.

@davidthomas1949 Ай бұрын

Did you check compression Homie?

@chevroletbelair1 Ай бұрын

i have looked in the past at his videos where he was telling he was moving to Amerika. nice to see him build tesame mustang as i have. i'm building it like a gt350 racecar. what type or racecar is he building?

@93jake81 Ай бұрын

kinda looked like the rocker studs pulled out on some of those valves on both heads. prolly due to stuck valves. i’ll be that’s what the noise is

@danderson9881 Ай бұрын

Looks like an old fram filter, Yay.. and far and few between oil changes, with cheap oil.

@ikhwanroslan1719 Ай бұрын

Dis you guys change the oild first before start it..if not lol..in the radiator has coolant or not..just change it first because it's be in there for a while..the compression of the piston is not great..its sound like the piston knocking..i just say it

@3wbasie Ай бұрын

i think this thing is toast especially if its .060 over

@3wbasie Ай бұрын

engine bay looks remarkably unfucked with!

@drpc1976 Ай бұрын

🤘😎

@Robby1 5 күн бұрын

I inherited a 74 Ford Maverick with a 300 inline 6 I'm in Tennessee wonder if you'd be interested in helping me

@deadclutch Ай бұрын

small block unkiller

@captainschannel9331 Ай бұрын

😎

@waltercannon86 Ай бұрын

Sounds like some stuck valves to me.

@nickmcminn2137 Ай бұрын

Yup and why it was popping and rattling

@roberthardman3774 Ай бұрын

That means of it belongs to him that means he won't go through three or four motors in a year lol

@jamesrundle2302 Ай бұрын

289 hipo or something like it?

@jasontaylor7837 Ай бұрын

I think you need to donate the 5 speed from the foxbody

@just4giggles-ex5ne Ай бұрын

Are you bro's firefighters with those cheezy moostaches.

@offroad4x4nhlife45 Ай бұрын

Could be a 289k code engine/aka 289 hipo

@deadon4847 Ай бұрын

Should have watched the entire video before commenting when they said it was a C code.

@nathanhansford76 Ай бұрын

Not sure there was ever a K code with a two barrel?

@jasontaylor7837 Ай бұрын

The balancer does not look happy

@PolecatCreekGarage Ай бұрын

this 100% needs a mustang ii front suspension. The factory stuff is junk

@skipads8784 Ай бұрын

289 are solid lifters.

@deadon4847 Ай бұрын

Only in the HI-PO.

@gabrielsturdevant9700 Ай бұрын

those are stamped non-adjustable rockers, if this was a solid lifer car that means theres 1/4" less lifter than there used to be

@70gambit Ай бұрын

No, you broke what 3-4 so far?

@jdedmnds1 Ай бұрын

Where is the GALAXIE?

@lilorbielilorbie2496 Ай бұрын

jedmnds1 Paint Jail.

@SlipperyCouch1 Ай бұрын

Coyote swap!

@OurCabinInThewoods Ай бұрын

Another screaming engine HECK yeah woohoo.

@WayneSpider Ай бұрын

Omg please please tell me you are NOT going down that rabbit hole. 70 videos a day " will it run crap " . Okay you are helping him got it.

@RigoHernandezJr. Ай бұрын

This dude wants to be Dylan McCool so bad

@rickallen6378 Ай бұрын

Who's that weird chick in the khaki shorts?

@lilorbielilorbie2496 Ай бұрын

rickallen6378 I don't think that 's a chick.

@rickallen6378 Ай бұрын

@@lilorbielilorbie2496 The one that was doing the video camera, really? I'll have to look again.

@speedyg2577 Ай бұрын

So disturbing watching you try to start this thing.