How to Build Timber Frame Walls Quick and Easy

How to Build Timber Frame Walls Quick and Easy - Workshop Build PT3

Рет қаралды 130,811

Күн бұрын

The Workshop Build is well under way and this time i will be showing you how i build the walls for my timber frame structure. I will show you how to build stud walls and how to erect the walls.
In this mini series i will be showing you the whole process of workshop or garden room building. We will cover the whole process from start to finish so that by the end, you will have inspiration and guides to build one of these yourself!
🛒 My Shop -www.amazon.co....
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The Amazon links above are affiliate links and as an Amazon Associate I earn from qualifying purchases. I may earn a small commission if you purchase via the recommended links, however this will not cost you any extra.

Пікірлер: 269

@TheDIYGuy1 7 ай бұрын

Hope you guys enjoy this as much as I enjoy building it! Roof episode to come soon 😊

@jimbanda 3 ай бұрын

Looks great, how does our climate suit these frames and ply? Like moisture rot.

@chrisleblanc5042 2 ай бұрын

That's stick frame not timber frame..

@samhayes5836 13 күн бұрын

The studs C16 or C24?

@andyh1837 6 күн бұрын

Hello there DIY Guy. I’m building a garden room using your design. I’m just finishing off the front wall (4.8m wide) and have made it from two side panels (1200mm each) two 300mm wide supports for the lintel (1200) for a French door/window combo (1800mm wide). My concern is how to make the various components really tight and strong. Could you let me know any top tips. Thanks

@Mclaneinc 7 ай бұрын

As I don't have a garden I won't be doing any of this, BUT it's so interesting seeing it come together. You do pick your days Cameron, I fully expect the next episode to have twisters and a full on tornado in the background with cows flying through the air (a nod to the film Twister). Another cracking vid mate...Paul..

@TheDIYGuy1 7 ай бұрын

Hey Paul. I know right! I seem to do things back to front with the weather 😂. Haha yeah a twister is the only weather we haven’t had lately!! Cheers

@bartolomeonew 28 күн бұрын

if anyone was curious about the song @5:00 - it is "Ice & Fire - King Canyon", you're welcome

@jtroinuj350 7 ай бұрын

The best video to date on DIY garden building is very detailed and useful . This is the only video I have subscribed to so far. Please keep up the good work

@TheDIYGuy1 7 ай бұрын

Wow, thank you!

@user-sc8nt6ee8o 6 ай бұрын

Best tutorial I’ve come across so far. Look forward to part three - Thanks

@Doug.... 7 ай бұрын

You made a cracking job of that! Liked the built in sloping roof feature and the way you joined the long sides together. 👍👍👍

@TheDIYGuy1 7 ай бұрын

Glad you enjoyed it 👍

@Doug.... 7 ай бұрын

@@TheDIYGuy1 I was well impressed to be honest. Any idea roughly of the timber costs for that. My 16ftx8ft shed is about £1400 to buy now.

@TheDIYGuy1 7 ай бұрын

Cheers! Timber alone including roof was £1500. But this was trade price from MKM builders merchant. If you were to buy from the likes of wickes/b&q it would be considerably more

@Doug.... 7 ай бұрын

@@TheDIYGuy1 Yes what i expected. But that is so much better than shiplap sectioned shed and you can insulate inside . Win win 👍👍

@davidmeagher4909 6 ай бұрын

Thank for the explanation of how to work out the wall heights - front to back - and the drop per metre to get a the correct drainage slope on the roof. Very, very helpful. Excellent video series all round. Keep up the top work. Subscribed😊

@TheDIYGuy1 6 ай бұрын

You are welcome! And thanks for the sub

@darrenmackenzie1892 7 ай бұрын

Brilliant stuff!! Beautiful trees in your garden and a decent size.

@TheDIYGuy1 7 ай бұрын

Thank you! Cheers!

@stepheno2462 4 ай бұрын

Great video. Exactly how I’m going to build my extension

@meethree6305 7 ай бұрын

Great series, I’m planning something similar for the summer so really looking forward to each episode

@TheDIYGuy1 7 ай бұрын

Great to hear!

@IcenI_Koi 7 ай бұрын

Same here

@nickpotter1897 5 ай бұрын

Just come across your channel, I can’t believe I’ve not seen it before. Working my way through your videos but really enjoying this series’s.

@TheDIYGuy1 5 ай бұрын

Welcome aboard!

@w.o.o.d.y 6 ай бұрын

Love the speed and no nonsense approach. Cocked up with the 10 uprights @8mm though.. needed 11 uprights for that 80mm lift...no lift on the first one !! and I bet you would let the osb hang enough to cover the ends of the other walls too if you built it again ??

@debtempleton9424 7 ай бұрын

What a fascinating video - I loved it thank you. You must have smashed maths at school! Your explanations are fantastic. Keep the videos coming please. A great journey to share. Cheers.

@TheDIYGuy1 7 ай бұрын

Glad you enjoyed it! Thanks a lot

@IcenI_Koi 7 ай бұрын

Come in handy this for my filter house/workshop/man cave. Thanks.

@TheDIYGuy1 7 ай бұрын

👍👍

@ratchriat1716 7 ай бұрын

Looking forward to seeing the final product

@TheDIYGuy1 7 ай бұрын

Me too 😂👍

@ronaldprowse7067 7 ай бұрын

amazing video, very clear and ive watched a few of them as I am building a 30sqm 6x5 home office, the base is down and I'm about to start the build but glad I ,saw this before hand

@TheDIYGuy1 7 ай бұрын

Glad it helped

@amazing451 7 ай бұрын

Great looking size workshop you've got there. Will be looking forward to all the jobs you'll get up to in there. 👍👍

@TheDIYGuy1 7 ай бұрын

Thanks 👍

@kamranafzal-jd3ux 7 ай бұрын

Brilliant - genuinely making me consider doing something like this myself

@TheDIYGuy1 7 ай бұрын

Good for you 👍

@TheDIYGuy1 7 ай бұрын

Good for you 👍

@mrturnbull9504 7 ай бұрын

Should of done a 6 inch brick upstand around the perimeter to get the timber away from the ground...rain gives up splash which rots the bottom of timber buildings fast....other than that you're doing a good job 👍

@TheDIYGuy1 7 ай бұрын

The dpm will be folded up the side of the walls with a breathable membrane overlapping it. This is then clad. No rain or splashing will come in contact with the timber. This will all be shown in coming episodes.

@phildini4929 6 ай бұрын

Great video and thank you for explaining everything is such detail 👍 I am about to start building my 8X6 garage. 🤞

@TheDIYGuy1 5 ай бұрын

Glad it was helpful! All the best

@phildini4929 5 ай бұрын

Ref to the 1 degree cut. My side walls are 6 metres long, I presume the 1 degree cut with a 20mm drop per metre still applies?

@user-yo4qp9sv1z 7 ай бұрын

This is great brother. Really practical. Thank you

@TheDIYGuy1 7 ай бұрын

Glad it was helpful!

@cookiemonster2299 7 ай бұрын

Superbly explained 👏👏❤️🇬🇧

@TheDIYGuy1 7 ай бұрын

Thanks

@craigmartin7504 7 ай бұрын

Great space that will be mate looking fwd to the roof 👍

@TheDIYGuy1 7 ай бұрын

Cheers! Coming soon

@hands197 7 ай бұрын

Awesome. Can't wait for the next ep. Keep up the good work 👍

@TheDIYGuy1 7 ай бұрын

Thanks! Will do!

@Wheats88 7 ай бұрын

Brilliant video as usual

@TheDIYGuy1 7 ай бұрын

Thanks again!

@stephencave187 7 ай бұрын

Proper planning......👌🏻

@TheDIYGuy1 7 ай бұрын

Thanks! That’s what it’s all about

@stephencave187 7 ай бұрын

@@TheDIYGuy1 Does it make more work that osb comes in 1220mm widths but plasterboard is in 1200mm widths? (It is at Wickes anyway 🤷‍♂️) Trim osb 20mm to hit studs??

@TheDIYGuy1 7 ай бұрын

Absolutely. If your OSB is 1220 then rip the 20mm off and your all good on those 400mm centres 👍

@garyhollywell2112 7 ай бұрын

Looks great abs will be a brilliant Space

@TheDIYGuy1 7 ай бұрын

Thanks, it will!

@chrislovelock776 7 ай бұрын

Class as allways mate

@TheDIYGuy1 7 ай бұрын

Thanks a lot 😊

@darrenpaulgreen 7 ай бұрын

Looking great Cameron. Clever way of calculating the pitch. Only difference I’d have made would have been to extend the osb at the bottom of the walls so it came below the slab and ensured any rainwater running down the wall couldn’t track under the bottom plate.

@TheDIYGuy1 7 ай бұрын

Thanks. Regarding the OSB. I’ve another way of solving any water/moisture issues which I’ll show in the next episode 👍

@christycullen2585 7 ай бұрын

Great job and great how to video looking forward to the rest to come

@TheDIYGuy1 7 ай бұрын

Thanks 👍

@johnadams1976 7 ай бұрын

Here we go. Cheers

@TheDIYGuy1 7 ай бұрын

😊👍

@richardbaldry7706 7 ай бұрын

Fantastic build video just subscribed 👏 Im building mine over the next few months anyone local to dorset that is also building one fancy getting together maybe get-together and help on both jobs simultaneously as the wife is no good at lifting 😅

@TheDIYGuy1 7 ай бұрын

Thanks for the sub! All the best with yours

@thejoat588 7 ай бұрын

Love this video ❤❤👏👏

@TheDIYGuy1 7 ай бұрын

Glad you liked it!!

@sankyeat 7 ай бұрын

Great video as always :) What's your primary trade? and how did you do a handyman course or just learn this stuff on the job?

@Megagamer12312 7 ай бұрын

Great video keep up the good work ❤

@TheDIYGuy1 7 ай бұрын

Thank you! Will do!

@TheNorthernmunky 5 ай бұрын

Brilliant

@MrBricey25 7 ай бұрын

Really loving the channel, planning on a similar smaller build myself

@TheDIYGuy1 7 ай бұрын

Go for it!

@TK42138 6 ай бұрын

Great tutorial.

@TheDIYGuy1 6 ай бұрын

Glad you liked it!

@martinanthony05 7 ай бұрын

Well done great video

@TheDIYGuy1 7 ай бұрын

Thanks 👍

@HenryK102 7 ай бұрын

Great video 👍🏻

@TheDIYGuy1 7 ай бұрын

Thanks 👍

@richwatkin8425 Ай бұрын

Apologies if this has been answered. But why no noggins half way up the walls? Thanks. Brilliant videos

@yasirrehman2946 7 ай бұрын

Good job pal

@TheDIYGuy1 7 ай бұрын

👍 ta

@V_Dubya 7 ай бұрын

Great detail on a good build. I bet those neighbours were fumin though 😂

@TheDIYGuy1 7 ай бұрын

They’ve not commented as yet. Thanks

@michaelplays2449 7 ай бұрын

Great video !!! thanks

@TheDIYGuy1 7 ай бұрын

Glad you liked it!

@camperventure388 Ай бұрын

Another great teaching build. Thank you so much. I've started my garden room now, L shape with canopy (I know, I made it harder for myself) at the moment I'm doing the foundation, measuring twice, third & even fourth time 😊... your advice is very easy to follow. One question re mesh, what size mesh did you use ? Thanks.

@jamesedwards2201 7 ай бұрын

I would be interested if you would show how to install a Workshop Consumer Unit Type A 3 Way if that is your intention. When you reach that stage in the build please great video.

@TheDIYGuy1 7 ай бұрын

Yep it’s coming 👍

@VINSCOT5 7 ай бұрын

Good stuff, I am waiting for it's finishing look, when you will set all in it.

@TheDIYGuy1 7 ай бұрын

You and me both! Cheers

@Pete.Ty1 7 ай бұрын

👍👍👍.Thank you

@TheDIYGuy1 7 ай бұрын

Welcome 👍

@mostyn03 7 ай бұрын

Good way to square the two walls is to measure the first length and x² then measure the second length and x² add them both together and square root the total. It will give you a measurement across corners. 👍

@TheDIYGuy1 7 ай бұрын

👍

@datderpa9499 7 ай бұрын

Or use 3 4 5

@TheDIYGuy1 7 ай бұрын

Absolutely

@mrturnbull9504 7 ай бұрын

@@datderpa9499I thought the same but no this guy's way is great for more accuracy on a structure this way with no up and down ladders and perfect for the roof...learn something new everyday thank you 🙏

@johnharris-qr9jj 6 ай бұрын

Does using osb on the outside of the wall negate the need for noggins ?. Can't see osb on one face stopping timber moving. Not a criticism just curious.

@oskarsmillers 7 ай бұрын

Good job 👍what thickness osb you used ? For outside corners for side walls I would do osb overlap of thickness of stud + osb. as you need cut narrow piece to cover timber .)1 joint covered plus extra tightening together🤷‍♂️

@TheDIYGuy1 7 ай бұрын

Thanks. This is 11mm osb on the walls.

@rutgershenk 7 ай бұрын

Great. Thx

@TheDIYGuy1 7 ай бұрын

You're welcome!

@JulyFighting 4 ай бұрын

Hi, great series so far. Any tips for garden rooms which wont have 90 degree corners? Making use of the most of my space I'll end up without any 90's unless I'm willing to waste a load of space.

@brightonduder 3 ай бұрын

Loving this series!! Question: when you remove the shuttering - won’t the sand and MOT fall out? Or am I asking a stupid question?!? Thanks in advance!!

@TheDIYGuy1 3 ай бұрын

Thanks. Never been an issue for me when removing the shuttering. I just backfill against it and nothing falls away.

@allanthomas1617 3 ай бұрын

Brilliant video series, thanks so much it's really helped me have the confidence to build my own workshop. What did.and length DeWalt bolts are you using to fix the floor plates down?

@dazz-world 4 ай бұрын

Brilliant series of videos - very helpful! I’ve got an existing base with a 1930’s asbestos double garage on it. I’m thinking of knocking it down to build an office/studio. What size wood are you using for the walls?

@JayCoffill 3 ай бұрын

Great video, how did you work out how much timber you needed to complete this? As I am looking to build one thisnsize in the future. Anynadvice would be brilliant.

@alexmorgan3435 2 ай бұрын

Would building same height walls all around with no drop and then when the roof joists are on make furlings to sit on them to create a fall for the roof work? It would also mean that inside your ceiling would be the same height throughout?

@halwatson7921 Ай бұрын

Great video. How would the max height be determined if I were to build one on a sloping plot? ~12” drop over 7mtrs

@RobertJohnson-kv6dr 2 ай бұрын

If you move the pad 1mtr from any boundary, is it correct that it can be 3mtr from ground level at the highest point? Thanks

@sajulldin5147 7 ай бұрын

Great video, 8am on day 1 was not 8am 😂

@TheDIYGuy1 7 ай бұрын

To be fair I don’t remember the precise time but I remember us starting around 8am

@sajulldin5147 7 ай бұрын

@@TheDIYGuy1 ignore me 😂, it said 8am, but video showed full sunlight. Looking forward to seeing the roof built.

@TheDIYGuy1 7 ай бұрын

👍👍

@seanditch4419 7 ай бұрын

Your neighbours are going to love you....massive building and workshop noise......great videos though🤣🤣🤣🤣🤣🤣🤣🤣

@TheDIYGuy1 7 ай бұрын

😂😂 I know! Cheers

@JuiceBanger1 7 ай бұрын

is it going to shade out the chaps greenhouse....@@TheDIYGuy1

@TheDIYGuy1 7 ай бұрын

I don’t believe so. The elderly lady next door doesn’t use it.

@bazrat69 7 ай бұрын

I'm looking to wire up my shed. Any chance you can do a video on it when you do it in here? Thanks

@ajayjust2626 7 ай бұрын

That would be a helpful video! I second this request 💪 ✌️

@TheDIYGuy1 7 ай бұрын

This is coming 👍

@JP_TaVeryMuch 7 ай бұрын

Start saving up for the armoured cable now!

@bazrat69 7 ай бұрын

@@TheDIYGuy1 legend

@TheDIYGuy1 7 ай бұрын

Hah yeah!

@cannontrodder 7 ай бұрын

I’m not sure if you’ve planned it but would you be able to do a breakdown in costs at the end?

@TheDIYGuy1 7 ай бұрын

Sure will 😊

@jasonmart1081 7 ай бұрын

The channel is called "The DIY Guy", but he has more professional tools than a trades person 🙄😛🤣

@TheDIYGuy1 7 ай бұрын

😆 not enough!

@TheOffroader7458 7 ай бұрын

Could you do a build cost at the end ? Would be helpful

@TheDIYGuy1 7 ай бұрын

Absolutely 👍

@TheOffroader7458 7 ай бұрын

@TheDIYGuy1 Thanks, mate 👍

@michaelscheepers7968 6 ай бұрын

@@TheDIYGuy1can I ask what the cost for this stages cost was? I’m scoping my workshop/ entertainment area currently Thank you

@grim-upnorth 5 ай бұрын

sorry if you get asked this every other day, but what timbers are you actually using. I've seen different sizes of OSB and even the "2x4's" aren't actually 2 inches by 4 inches... I'm assuming they're 50mm x 100mm but when I search for that, I find timber that's actually 44mm or 45mm "finished". Again, sorry if these are noob questions, but I'm planning my own garden building and I need to get everything right so I don't f it up down the line. These videos are some of the absolute best videos out there on how to build a garden room, so I know whatever you say will be right. Thanks in advance.

@TheDIYGuy1 5 ай бұрын

Hi. For the walls I’m using 47x100mm.

@grim-upnorth 5 ай бұрын

@@TheDIYGuy1 thank you so much

@Workshop-of-Allsorts 7 ай бұрын

Nice job, just coming to the end of my own (my wifes) studio build. Always interested how the real experts do it 😉... i documented my build on YT, i also used PVC cladding, looking forward to seeing your build progress 👍

@TheDIYGuy1 7 ай бұрын

Nice work! Thanks a lot

@Mr-To-Do-List 4 ай бұрын

Excellent video again Cameron. Quick question, what thickness OSB did you go for? Is it 11mm? Would that be the ideal thickness for flooring? I am building a lean to shed.

@AndrisPrikna 2 ай бұрын

how about if you go 2 meters away from the wall, can you build higher? 2.1 meter is not bad, for ceiling but we have mtb, I was planning to store the upright against the wall and I was calculating that I will go 2.3- 2.4m until ceiling. How far I need to be from the wall to build higher?

@Pro_noob537 4 ай бұрын

Awesome video, will be going through the series. Do you have a rought cost for materials?

@trimmxx2169 7 ай бұрын

good job mate could of just used furring strips for the roof slope make your life easier.

@TheDIYGuy1 7 ай бұрын

Yeah your right 👍

@JJherne 7 ай бұрын

Great video, well explained and filmed. When building my deck last year I used 345 to find square. If someone didn’t have large squares is that a method you’d use/recommend? *Edit - Just realised you covered that in the previous episode :)

@TheDIYGuy1 7 ай бұрын

Absolutely 👍, 345 is something I often use. Thanks

@AdelphiCreekRanch 6 ай бұрын

Awesome vid for a newbie like me! Thanks for all of the detail. Question: why did you not have the OSB on the sides, overlap the 2x4s of the front and back walls at each of the corners?

@TheDIYGuy1 6 ай бұрын

Glad you liked it. No reason, just my preferred way of building. I put them bits of osb in afterward

@jasonlafferty6512 6 ай бұрын

Hi Cameron, came across your videos and absolutely loving them as I look to take on some jobs this year. I am looking at a smaller version of this for my own garden but a question I have if you could help. I already have solid and level decking which is actually on the top of slabbing, can I use the decking as the base or would you suggest pulling that up and using the slabbing? Then I assume I'd build a frame for the floor similar to your wall frame to lift it off the decking and place damp proof membrane on that then sit the walls on it? Keep up the great work and thanks for the Amazon link to some of your tools!

@bigtop14 7 ай бұрын

Hi can you put the board on the inside and the insulation on the out then the vapour barrier on the out then cladding

@jonathanclatworthy3597 Ай бұрын

@TheDIYGuy01 Great series 👍🏼.. your 100mm Dewalt concrete anchors were they 6mm or 8mm ? Many thx

@dl1874 Ай бұрын

He used a 6mm SDS Drill Bit, so my assumption has been the 6mm anchors

@chuckt9630 4 ай бұрын

Is there no sill plate or bolts imbedded in concrete?

@stevencraggs8444 7 ай бұрын

Are u a joiner by trade. ?. Its always been,vertical is plumb. Horizontal is level.

@auwda 2 ай бұрын

vader's nail gun?

@camperventure388 7 ай бұрын

Probably one of the beat instruction videos I've watched and I've watched a lot. One question, I want to extend an already old shed but in great condition it's on concrete that needs resurfacing the wood in some areas needs some attention replacing etc... however I want to extend this shed, its 22.26 m² up to a drop in the garden patio which has a drop of around 10 inches I'm hoping to add joint straps (for a floating floor) from the original footing extend over the patio, the extention will be around 7.9 m² is this doable ? Thanks

@TheDIYGuy1 7 ай бұрын

Brilliant! The shed extension certainly sounds do able to me. There’s a lot of ways you could achieve the height difference to bring the floors level

@R44YLS 7 ай бұрын

How can you tell between the RWD and AWD physically from the outside if I was to be looking to buy one? Don’t want to trust an ad etc. Thank you!

@SisNbroShow1 5 ай бұрын

Hi, great video and very helpful too,do you use ring nails for the frame or straight nails, I'm going to attempt the project myself and trying to get a list of materials together , 👍🏻

@TheDIYGuy1 5 ай бұрын

Straight for the frame 👍

@matthewdartford9501 7 ай бұрын

Perfect timing. I’ve just stated doing a garage conversion. Already taken a few tips from this. I’m Norwich based (I think you are to) where are you getting your timber from?

@TheDIYGuy1 7 ай бұрын

Brilliant. I am on the outskirts of Norwich. I get all my materials from MKM builders merchants and sometimes wickes if I only need the odd bits.

@danielmartin2276 Ай бұрын

You gave a cost for the concrete base, how much was the build?

@corvi16 7 ай бұрын

great progress on the workshop! Would it be better for those concrete screws to have a washer to hold the frame even more to the ground?

@TheDIYGuy1 7 ай бұрын

Thanks. These particular concrete screws have what dewalt call a ‘locking washer head’ so a washer isn’t necessary. If you take a look at the underside of the head on the video you can see this.

@corvi16 7 ай бұрын

@@TheDIYGuy1 perfect! Will give them a try someday

@keitho77 7 ай бұрын

Great work lads!! Will you be running water and power in as well?

@TheDIYGuy1 7 ай бұрын

That's the plan!

@AbdulSadik-nq7tu 2 ай бұрын

Great video. Would you by change have a list of materials and quantities used? I have the same space where I'm looking go build. Thanks

@TheDIYGuy1 2 ай бұрын

Thanks. I’m afraid I don’t have a list

@AbdulSadik-nq7tu 2 ай бұрын

@@TheDIYGuy1 thanks for your reply. How many OSBs and 4by2s would you say you needed to purchase? Thanks

@TheNorthernmunky 7 ай бұрын

Great video mate. Quick question, when the rain runs down the outside, won’t it work its way in as it will be soaking the sides of the concrete pad? Will you fold the DPM up and clad over the top of it to avoid that?

@TheDIYGuy1 7 ай бұрын

The DPM will be folded up the walls with the breathable rhino vent membrane overlapping it. This will then be clad. There will be no issues with damp or water coming in contact with the walls. Thanks

@asabriggs6426 6 ай бұрын

Hey, did you consider using California corners to allow installation of insulation? I presume with building this during winter you will be considering a healthy amount of insulation!

@TheDIYGuy1 6 ай бұрын

Hi, I will be going with either actis hybris or PIR. I haven’t decided yet.

@asabriggs6426 6 ай бұрын

@@TheDIYGuy1 So many things to decide when building a garden room. Never heard of Actis hybris before; looks to be cheaper than PIR (perhaps £11 per square meter rather than £15) although it is a multifoil so less proven than PIR!

@TheDIYGuy1 6 ай бұрын

I know right! I’ve seen a few people using actis hybris. I might give it a shot you know

@Elric787 6 ай бұрын

Wouldn’t it be easier to use firring strips?

@audi3210 5 ай бұрын

Genuine question, but permitted development seems to have 2 rules which I can't see that you meet? The first one is that within 1m of a boundary, the walls need to be made from non combustable material (i.e. not wood!). The second is that the maximum height at the eaves needs to be 2m (not 2.5m). Have I got it wrong?

@TheDIYGuy1 5 ай бұрын

As long as the walls are coated with a non combustible material which mine will be(metal box profile) it’s fine. 2.5m at the eaves is the rule and that can be found via many sources online.

@audi3210 5 ай бұрын

@@TheDIYGuy1Thanks you for clarifying this, big help for my planning of a new garage! Great videos by the way!

@hewoguys2506 5 ай бұрын

will the floor be insulated and if so why didnt u do it under the concrete

@midge486 6 ай бұрын

Quality work mate👍🏻 Did you need planning permission for the build? I’m planning on something similar. Cheers

@TheDIYGuy1 6 ай бұрын

Thanks. Nope, it falls within the permitted development rules 👍

@midge486 6 ай бұрын

Brilliant mate, I think I should be ok too then👍🏻

@patrickloftus 7 ай бұрын

Did you consider insulating under the concrete slab to help with ceiling height? If so, what made you decide against that?

@TheDIYGuy1 7 ай бұрын

I did, and if this were being used as a garden room instead of workshop I would have done that. The thing to consider if doing this is that you’ll need to take a fair bit more soil out to make way for the oversize.

@patrickloftus 7 ай бұрын

@@TheDIYGuy1 True, another 100-150mm of digging would not be fun. Currently frying my brain trying to figure out the side wall calculations....imagine chopping the back left corner of your building off at 45 degrees.... A 4m x 6m room with a 3.6m back wall, 1.6m left side wall, and a 3.3m wall at 45 degrees joining the two. I should have studied trigonometry harder at school! It's the slope calculations that are a 'mare, as the uprights on that angled wall need both a front to back angle cutting on them, same as yours, but also a left to right angle cutting.

@bascodelagamma 7 ай бұрын

👍

@TheDIYGuy1 7 ай бұрын

👍💪

@CreationOfBeasts 7 ай бұрын

I would love this is my back garden, which areas do you cover mate?

@TheDIYGuy1 7 ай бұрын

I’m Norfolk based 😊

@prawnk1ng 7 ай бұрын

Do you go straight into the concrete with your anchors or do you have to use plugs?

@TheDIYGuy1 7 ай бұрын

Straight in 👍

@Behindthedeskpod 7 ай бұрын

Great video again Cameron is the only difference between using nails and screws for the wall speed? Don’t have a nail gun wonder if it’s worth investing

@TheDIYGuy1 7 ай бұрын

Thanks. Nails are faster but also have a better shear strength.

@Behindthedeskpod 7 ай бұрын

@@TheDIYGuy1 top man thank you!

@Behindthedeskpod 7 ай бұрын

Sorry Cameron one more question! Are you making double swing doors? Looking to do some myself so could be useful for me to wait and watch

@TheDIYGuy1 7 ай бұрын

No probs. I’m not, I was going to fit bifolds but have now decided to do a roller door instead.

@Behindthedeskpod 7 ай бұрын

Not a bad idea I will await your next update then 🙌🏽

@tunnel7 7 ай бұрын

No Track Saw wow have a word with Dewalt🤣🤣 make sure you insulate that floor well I made that mistake bloody freezing in winter oh and wouldn't want the bill for that Timber now well done looks great

@TheDIYGuy1 7 ай бұрын

Haha I’ve been messing around trying to decide on what one I want! I might go with the makita 40v. That’s a tough decision for someone who’s primarily dewalt! Cheers

@DIYCroft 7 ай бұрын

@@TheDIYGuy1 I'm on Milwaukee but I was pretty impressed with my cousin's DeWalt track saw. The corded festool is decent as well

@TheDIYGuy1 7 ай бұрын

👍

@stuartandrews4344 7 ай бұрын

@@TheDIYGuy1 Bosch track saw here.

@davideyres955 7 ай бұрын

@@TheDIYGuy1I bought the dewalt corded track saw and when I was building the loft boards I built a surround for the hatch out of the flooring and got it spot on to less than a mm tolerance. The rubber strips on the side stops tear out and let’s you make accurate cuts like I said to less than 1mm. I suspect they are all pretty much the same though, but I’m well pleased with my one.