No video
How To Make Amazing Color Lithophanes Using The Bambu Lab CMYK Bundle!
Рет қаралды 124,619
Жыл бұрынToday I show you how to make amazing color lithophanes using the Bambu Lab CMYK Bundle! It is so easy to do! The Frame STL is free and you can get the led panel cheap too!
CMYK Filament Pack: shrsl.com/45eqq
LED Panel: shrsl.com/45eqp
Bambu Lab Printers: shrsl.com/45agu
CMYK Instructions and STLs: wiki.bambulab....
Join this channel to get access to perks:
/ @theedgeoftech
🛑 Subscribe for more: www.KZfaq.co...
Save money by using my discount code TEOT5 on the TH3D Website: www.th3dstudio...
3D PRINTERS, TOOLS & MATERIALS (affiliate)
TH3D: www.th3dstudio....
FDM 3D Printers: www.amazon.com...
Resin 3D Printers: www.amazon.com...
Laser Stuff: www.amazon.com...
3D Printing Filament: www.amazon.com...
3D Printing Tools: www.amazon.com...
3D Printers and Parts from Creality Direct: www.creality3d...?sca_ref=14184.gw5rXaIv7L
🛒 My favorite tools/materials on our Amazon page: www.amazon.com...
Want more Edge of Tech videos? We go live every Monday Night on Hotmakes!
📺 HotMakes live streams: / @hotmakeslive
SOCIAL/SUPPORT LINKS
💵 Patreon: / theedgeoftech
💲 PayPal: paypal.me/thee...
📸 Instagram: / theedgeoftech
📣 Twitter: @theedgeofteck
💬 Discord: / discord
👽 Facebook: TheEdgeofTechOfficial
🎥 FILMING GEAR (affiliate)
www.amazon.com...
Music by Wicked Realm
Album - No More Fairy Tales
Song - Feed
/ @wickedrealm5507
Disclaimer: Some of these links go to one of my websites and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
@TheEdgeofTech Жыл бұрын
CMYK Filament Pack: shrsl.com/45eqq LED Panel: shrsl.com/45eqp Bambu Lab Printers: shrsl.com/45agu CMYK Instructions and STLs: wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions
@paulgittins6724 2 ай бұрын
I decided to try this on my new Bambu A1. It worked very well, except for a little confusion on the color settings. This was a quirk with the A1, which I have since corrected. The process proved to be very easy and the accessory parts were easy to obtain as well. I think I am going to have a lot more fun with the Lithophanes. Thanks for making this video. I have found your videos consistently helpful and refer to them regularly.
@river2000sg2 11 ай бұрын
Dude, it blows my mind out... Thank you very much for this!
@itsMantaRay 11 ай бұрын
Always appreciate a clean and concise video walk through. Thanks for your time!
@tomp8059 3 ай бұрын
This was SOOO helpful. Very clear directions and explanations. THANK YOU!
@WoofPackOnline 14 сағат бұрын
thank you so much for this!
@HobbyistPrinter Жыл бұрын
We use 3d printers to print 2d prints. We have come full circle lol
@TheEdgeofTech Жыл бұрын
😂😂😂😆
@Hanzi2u Жыл бұрын
I love it
@jackgamer6307 Жыл бұрын
I can't wait for my highly advanced 3D printer to tell me "can't print, low on cyan"
@j03y__ 8 ай бұрын
Too bad the opposite isnt possible
@SaturnsReturn77 3 ай бұрын
I lol’d
@VisionMiner 11 ай бұрын
OMG this is freaking awesome!!! great choice for a picture to print, classic!!!
@paulr4279 Жыл бұрын
Also better results with a .2 nozzle. But as I 100% failure rate with a .2(clogging/bulging), I’ll be sticking to .4. I’ll give palette 4 a whirl tho. Cheers.
@SangheiliSpecOp 7 ай бұрын
this is awesome, so cool of Bambu Lab to make this kis and the frame and lights available. And so cool of you to make such a detailed tutorial!!!
@Makersandjoe Жыл бұрын
Cool one Jim.👍 Liking those Led Panels. Haven't done a color litho yet. Will definitely check them out.
@cvwatch Жыл бұрын
Sooooo cool. I see a potential for portraits, etc.
@TheEdgeofTech Жыл бұрын
For sure!!!
@sebastiaanj.s.7107 4 ай бұрын
Super cool video and love your enthusiasm - thanks for sharing!
@CALSASH 4 ай бұрын
Great video but can you clear something up please? At 4.20 in the tutorial you say to change the lirst layer height to 0.15 but the video shows you changing the first layer under the line width tab and not the line height tab. Please confirm which is correct.
@jordanwelsh5710 2 күн бұрын
for printing these with PLA, do you recommend standing up or laying down? Which provides better clarity in your opinion?
@darkracer1252 5 күн бұрын
not ready to spend the money on the cmyk kit filament. but deffinatly doing this somewhere down the line.
@joecash5096 8 ай бұрын
This is amazing. Just ordered the filament kit using your link! Hope it gets here in time to print some xmas presents! Going to find that same star wars picture for the first one I think.
@TheEdgeofTech 8 ай бұрын
Awesome!!
@woodwaker1 Жыл бұрын
Jim, Thanks for showing the process. I have my kit from Bambu and the LED back panel, just have not gotten around to trying it. I have been too busy with the HueForge prints. Now I can try color lithophanes
@TylerLL2112 11 ай бұрын
That is so sick! I have to give a couple of these a go.
@jorgeacosta1198 2 ай бұрын
exelente tu video gran explicacion no sabia que se podia hacer este tipo de cosas exito y salud
@missymojo 9 ай бұрын
brilliant, do you have a video on the non-colour version?
@unlock-er Ай бұрын
can we do this on a printer without MMU/AMS/CFS? I know that it'll be cumbersome to change filament manually but if there's a way of finding out which color filament when, then that'll be okay IMO.
@bradk6172 10 ай бұрын
I'm getting errors with manifolds in the models produced by lithophane maker. I simplify each part and can sometimes repair them in Orca, but not always. I then try slicing it and Orca gets to 15% then hangs there. I've let it run overnight and it still never finishes. Any tips? For what it's worth, the Hueforge lithophanes sometimes cause the same issue. It seems to be detail of the parts related?
@paulbutler1296 8 ай бұрын
Great video, clear and concise, huge help
@stevelaminack1516 7 ай бұрын
Has anyone found the same or similar LED panel someplace other than BBL, they are out of stock (thanks Jim :-)
@Jacon95 11 ай бұрын
I did not expect to be this good
@AMartinez2.0 9 ай бұрын
Awesome Video! Thank you for the how to! 😎🔥
@richardparnell1865 8 ай бұрын
So given the LED panel doesnt come with a cable at all.... what cable or link to cable did you use in the end to power it off the pack.
@diy_wizard 9 ай бұрын
Thanks dir the good instruction! Really Looks cool!
@LanceChisenhall Жыл бұрын
First print came out great! Was wondering what the other palette selections are? Would they produce different shading/colors/imaging? I'm using generic CMYK filament, not bambu's brand. Should I be using another palette selection?
@davidfarris1332 Жыл бұрын
I've got a heavily modified ender 5 plus as my only 3d printer. I love the thing since I built it and when it's working it works absolutely great but I'm kind of over having to constantly tinker with the thing. I am strongly considering an X1C but also hear a bigger one maybe on the horizon. Hard decisions here, Jim!
@RosenrotVosa Жыл бұрын
I too have a heavily modified Ender 5 Plus, and recently got a P1P w/ AMS. Any buyer's remorse will be annihilated once you see a Bambu Lab printer chuck out a Benchy in the time it takes to take a shower.
@RandomGreenFishPhone Жыл бұрын
I was in a similar situation a few weeks ago, I have an Ender 5 Pro with all the standard upgrades (BL touch, glass bed, dual extruder, etc.) but always had to mess with it to get it to print right and still have issues with dimensional accuracy when the prints look ok. It was a really hard decision, but I went with the X1C with AMS and have been printing for a little over a week now. It certainly isn't without issues (especially the AMS ) but overall I am very happy with it. I may post a video soon comparing the prints between the E5 and X1C and go over my experience with it so far if I have time.
@denverelkins4855 Жыл бұрын
@RosenrotVosa Right! 😂 As soon as that benchy started coming out my jaw dropped, looked over at my Ender 3 S1 Pro and apologized.
@braddunn5983 11 ай бұрын
Just do it, I have a ender 3 s1 pro running on klipper I tinkered with for last year. I got a bambu several months back it's impressive to say the least. Light years ahead from the enders not having to tinker with bed leveling and all he others constantly is so nice.
@boboscurse4130 10 ай бұрын
I love my new Bambu P1S except for the fact that absolutely nothing sticks to the bed without glue stick.
@marcoss727 8 ай бұрын
Nice litho and nice work. I'll subscribe for sure.
@enhaosong5543 4 ай бұрын
This is super cool!
@jmeredithD2 2 ай бұрын
Just got the bambu P1S and I cannot figure out how to properly print a lithophane even on just one color - when I go to slice it - the background disappears - new to the P1S and to orca slicer
@andrewball1008 4 ай бұрын
Very helpful video! I am trying to print one with the CMYK on my X1 Carbon and I keep getting the error "Invalid spacing supplied to Flow::with_spacing()". Have any ideas what could be causing that?
@VisionMiner 11 ай бұрын
Aaaaaand just noticed the shirt. That's friggin hilarious LOL
@slinkos Ай бұрын
At 4:20 you are talking about first layer height, but you are changing the first layer line width. Is this a mistake?
@Chad.The.Flornadian 7 ай бұрын
Hey Jim! My first Bambu printer, a P1S, is arriving tomorrow. Sooo...on a bambu printer we don't print lithos standing up anymore? I figured I wouldn't have to orient the litho in the direction of the Y-axis anymore since it's not a bedslinger, but I figured the best resolution would still be standing up.
@TheEdgeofTech 7 ай бұрын
In this case, it is multiple colors layered on top of each other, so it would be printed laying down. If you were doing a regular lithophane was a single white or any other color then standing up would be great. I Have seen it done both ways and I think there's two schools of thought on that.
@ethanhogan523 4 ай бұрын
In the video, the final product didn't look very bright unless the lights in the room were off. What say you about the brightness?
@BarbaricMouse 3 ай бұрын
Orca changes everything. I wcould not get Bambu Studio to slice all 4 colors. I did the exact same files in Orca now I have all 4 colors. I would have never thought Orca would be better than Bambu.
@Matrixas Жыл бұрын
Can you print one vertical position and tell us how long it will take to print? (0.12 layer height if possible)
@oldschoola41 6 ай бұрын
How do these look in a fully lit room? is it possible to make larger prints(i.e. modify the frame stl )? I know the led backlight is what it is though.
@Alfaworksgaming 3 ай бұрын
where do i get the picture frame from please
@redherring5532 Ай бұрын
Diffuser 🚫 Peice of parchment paper ✅️
@cj4064 7 ай бұрын
I have made three very cool lithophanes following your instructions and using the 4mm nozzle. Since the new update Nothing is sticking to the heat bed and 1 globed up my hot end. I can't set first layer less than 2.9 the slicer keeps giving me a flow path error. Please help was trying to make a xmas present for my parents.
@dingdongdaddy589 4 ай бұрын
Pretty cool. Non-color lithophanes print more crisply standing up…
@jakeMTSU 8 ай бұрын
If you lower the lithophane resolution (1st option) its a bit more clear (sharp) but takes longer to print. at least in the 5 i tested ... I only did .20
@simplesimon4561 8 ай бұрын
I'm always curious about the print times, what was it for the star wars color? Also I'd be interested in seeing the time lapse of the lithophane vs the the frame itself as the lithophane is a much unique style of printing
@theeox Ай бұрын
In the video you can see it's roughly 11 hours just for the lithophane.
@glengalea 11 ай бұрын
hi, thanks for the video. i am trying on bambu studio and when i slice playe it is saying Invalid spacing supplied to Flow::with_spacing(). i am printing with a 0.4mm nozzle and tried every layer height available. thanks
@780subie Ай бұрын
This all so cool. Will say tho that the frame looks janky, the light shines through the side of the frame. But it's free I guess.
@sundance2005 8 ай бұрын
Do you have a video or know where I can find how to adjust the Z offset on my A1 mini? It appears to be printing with the nozzle to close to the bed. Just carious, why do you use Orca rather than the Bambu Labs slicer? I just installed it and it looks very much like the Bambu labs slicer but there must bae a reason(s).
@brycemclaurin8215 7 ай бұрын
Are you able to print these veteically? I find it usually gives better quality when I print normal lithos vertical
@boboscurse4130 10 ай бұрын
At 4:22 you say change first layer height to .15 but you type it in layer width.
@ekkus93 6 ай бұрын
Why is the lithophane printed flat? Usually for the white lithophanes, they're printed standing up since the resolution is higher on the z-axis vs the x-y axis.
@sassysuzy4u Жыл бұрын
Awesome thanks!
@emanuelcalderon Жыл бұрын
How many colors did you use there? And do you have to use bambu filaments?
@gn0m3r4l 9 ай бұрын
Of course you don't have to use the colors from Bambu. They will be the easiest with the RFID chip. But as long as you have calibrated everything right, any color matching filament will do the job
@JesseJames-wj8ft 8 ай бұрын
Thanks for the vid, ordered a bundle though your link
@matttheis3651 8 ай бұрын
When going thru the website to create the stl, it wont load a preview image and also the zip file only contains a text file and no stl files. Any idea how to fix this?
@AJ-xm6yg 11 ай бұрын
I have a Bambu x1c. Doing color lithophanes. I tried vertical , failed due to warping. Went flat and can't get first layer to be even with a constant flow, I'm using a .4 nozzle and followed the guidelines. What the guide doesn't provide is speeds. Especially first layer. Any help
@xodzphone 8 ай бұрын
Does color with highlighter on white work?
@brettmaxwell1360 Жыл бұрын
Hi Jim, When we get the 4 stacked STL files do we leave them stacked on the plate or do we separate them for printing ?
@TheEdgeofTech Жыл бұрын
When you drop them in all at once in the plate, choose YES when the pop-up comes up. That will leave them all together.
@sideburn 8 ай бұрын
What’s the print time for that size and settings with .2 nozzle ?
@maurice0822 Жыл бұрын
Great video. 👍🏼 You mentioned a link to Jason murph? Which link is it?
@rmgrimshaw23 Жыл бұрын
Is base height the same as first layer height? I don't have that option for non color... The setting are slightly different.... I've been using a different software for mt lithophanes but I'm interested in the frames offered so I thought id give it a try.
@tiddybagel 7 ай бұрын
It only.worked once for me and then every other attempt the zip folder only provided the settings
@firsthope8196 7 ай бұрын
ok so i don't have a bambu or a mmu. i am trying to print one. how do i know the color order?
@mreoski 6 ай бұрын
This looks terrific. I was UNABLE to locate the link to the "FREE" Lithophane Picture Frame. Help!
@wk5199 6 ай бұрын
The CMYK Instructions and STLs link has the file in the wiki under "frame and light guide plate printing".
@jakeMTSU 8 ай бұрын
Why use Orca over BL slicer?
@jthespiceoflife Жыл бұрын
Where did you get the file for that clock in the back corner? Thank you
@brettmaxwell1360 Жыл бұрын
Hi Jim, I have just purchased the Bambu CMYK KIT. can we use any white for the diffusor I have the Bambu PLA tough white, as they are out of stock of the PLA white standard
@jakeMTSU 8 ай бұрын
tough white works fine, used it before
@Baldielocks2006 7 ай бұрын
Hey Jim! Great video! I have not been able to find the file for the Frame, and also I do not see the LED panel any where. Do you know if its still out there? Thanks man! Love the channel!
@Baldielocks2006 7 ай бұрын
Never mind Jim! It’s on the Bambu Wiki! I found it. Thanks again!
@Edramon53 Жыл бұрын
How does this actually print? Is it constantly swapping colours or printing one at a time? How much poop does it generate? How many manual changes would you end up doing if you did this without the AMS?
@msiekkinen Жыл бұрын
I'm in the process of trying one right now. generated 25x25mm to be small in hopes of quick small initial test print to see how it's looking. 459 filament swaps for a total of 15h and 3m! You definitely need an automated filament system for this. And I'm quickly starting to feel like screw this..
@strix8707 8 ай бұрын
I'm having an issue where lithophane maker is only giving the .txt file and none of the .stl files. is anyone else having this issue? i really need some help with this since I don't know what else to do.
@KilllerPenguins Жыл бұрын
This is def cool and great video as usual brother! The only issue I see is print quality as lithos are meant to be printed upright rather than flat. Have printed lithos for years and flat def takes away the print quality. Have you tried this process but with it standing upright and comparing results?
@pstierney Жыл бұрын
I haven’t made any of these yet but have heard the same about orientation. My guess though is for color, having it vertical would require exponentially more filament swaps. So it would take a lot longer and more waste. But that’s just my educated guess.
@eyewishwalrus Жыл бұрын
Great video dude, what sized nozzle did you use for the print? I have just come from my old trusty and very slow cr10 printing lithopanes on a 0.2 nozzle
@mfmageiwatch 7 ай бұрын
0.2 nozzle, he mentioned it in there
@AndyDeMeyer Жыл бұрын
I think you forgot the link to the frame STL...
@TheEdgeofTech Жыл бұрын
Thanks! I have put it in the description, and also as a pinned comment! I appreciate the heads up!
@andywhiteing 6 ай бұрын
I went to Bambu to order the light panel but was unable to add it to my cart? Do you know if they are just out or have stopped making them?
@pearlharbor8065 6 ай бұрын
They still make them but they sell out fast. Keep checking back, I just got some delivered today.
@user-ud4nj7rc8w 11 ай бұрын
When I hit Show Expected Image no image pops up
@terryd8692 9 ай бұрын
That is amazing! How thick is the print and how much wastage do you get from the AMS? I'm thinking not a lot because its not too many layers
@mfmageiwatch 7 ай бұрын
yeah, I'm curious with the color shifting waste, and the extra expensive filament, how much one of these costs in total. They are cool, but seems like it would get costly
@cld0410 6 ай бұрын
I was wondering the same! When I zoomed into the stats it said the cost was a dollar and some change and then number of filament changes was 17. Not too bad, but print time was estimated at just shy of 11 hours. Still cool though
@lintothevoidl 9 ай бұрын
Am I doing something wrong? When I use the site it only gives me a 400+B file with a text file in it instead of STLS.
@AmaZz0r 8 ай бұрын
The site doesn't generate STLs with every image format. JPEGs worked for me.
@scottydntno 11 ай бұрын
Bambu Slicer keeps trying to "repair" file then it closes the program.
@stuartalexander3 Жыл бұрын
How much waste filament ?
@TheEdgeofTech Жыл бұрын
Not that bad. Actually! Only enough to purge between filaments and a small amount in the back between filaments. Quite minimal but the lithophones are also not very tall so that helps!
@emanuelcalderon 8 ай бұрын
How do you know what colors to put in the ams?
@Sventastic_78 7 ай бұрын
the Colors you would need are CMYK. Cyan Magenta Yellow blacK they can be used to "mix" any other color. this is the same way 2d printers or paper color printers work.
@gruvinnz 2 ай бұрын
Did you forget the link in the description? "There is a link in the description below to take you right to the lithophane color page but ...". There are no links containing "lithophane" as the time I am writing this. Cheers. (I would add the link here but then my comment would likely get deleted by some dumb bot.)
@KTPDAILY 4 ай бұрын
How To Make Amazing Color Lithophanes Using The Bambu Lab CMYK Bundle!
@odinata 8 ай бұрын
And as a bonus, after you print one of these, you have made your own floating plastic island in the middle of the pacific ocean!
@ron9581 Жыл бұрын
Can I get some help please when I create a Lithophane I get a error (non manifold edges) can you help me please? I have a P1P and are using Orca Slicer.
@MrPotatoeAim Жыл бұрын
As you can see in the video, same thing for him, also same for me Idk what causes this but i guess you can just ignore it
@ron9581 Жыл бұрын
@@MrPotatoeAim Thank you for your reply. I will try this and see.
@MrPotatoeAim Жыл бұрын
@@ron9581 generated one yesterday and sliced it and had no errors or further warnings but didnt print it because im still busy drying the filament xD
@pesto12601 Жыл бұрын
Umm.. no shipping to US? Sadness....
@TheEdgeofTech Жыл бұрын
They ship to the US! Go to the top right of the page and change the country.
@pesto12601 Жыл бұрын
@@TheEdgeofTech cool... many thx!
@allansteffensen5646 Жыл бұрын
Just fyi..you are going through changing the initial layer height, but what you do in the video is change the initial line width...
@wayneryan1 11 ай бұрын
I can't get them to look any good, the colours arnt right and it's blurry
@carpaithian Жыл бұрын
The cyan in the CMYK pack isn't cyan, it's more azure. Which ruins the colour accuracy
@TheEdgeofTech Жыл бұрын
Crazy!! I'll have to check it out! Thanks!
@tonywerner5577 8 ай бұрын
SHAKE MOAR
@user-vl8jv1tl5e 2 ай бұрын
way too small , cam you make poster size?
@anderson12497 Жыл бұрын
I’m having issues with the print not even sticking. No part of the print actually sticks and it just spaghettis. I went and tried to print other things and they print normal.
@dailyalpha3795 9 ай бұрын
What printer are you using
@anderson12497 9 ай бұрын
@@dailyalpha3795 X1c. My problem was that I for some reason I ended up clicking the profile for a different printer and it kept failing. It’s all good now
@SunriseSearcher 10 ай бұрын
on 4:21 you mention layer height but change the layer width....This is wrong...your layer height remained 1.5
@boboscurse4130 10 ай бұрын
Whoa...I thought lithophanes had to be printed vertically.
@TheGuilev 6 ай бұрын
we need a crafted backlight instead of buying the bambulab one's cause he his not cheaper and no charger with it
@chrisalberter7198 7 ай бұрын
why does the yellow show through so much?
@swalker2000 7 ай бұрын
Why do they call it a CMYK kit if the fourth color is white? CMYK is Cyan, Magenta, Yellow, and blacK.
@sivuk932010 3 ай бұрын
Because it's a litophane. The black color in litophanes comes from the transparency through the white filament. The thicker it is, the darker it'll look. On 2d printer you need black bc the paper is already white.
@xxazsencaxx 9 ай бұрын
Dude you set first layer width to 0.15, not first layer height...
Friendeez
Рет қаралды 9 МЛН
Yu Heng Wong
Рет қаралды 61 М.
PRINTING PERSPECTIVE
Рет қаралды 295 М.