I bought my 525 (exact spec as this one) about the same time as you made this video, looks like I made a good choice. I've just had my first fault with it after 10-15,000 shots, the lower barrel firing pin became pitted and started having "fail to fire", got a new pin and spring (£28) fitted it myself, 40 minutes including giving it a good clean, job done!

Great Video! I recently fail in the river duck hunting any Citori wouldnt recock the barrels. I worked and worked on the gun but was unsure how to "FULLY" tear it down. This video walked me through everything and with a REALLY GOOD CLEANING the Browing Citori is back in action!! Thank you! Thank you! Thank You for your content!!

Just bought my 1st gun, a 525 made way back in 2011. It was this review that swayed me from the Miroku, that and the price and the adjustable comb. The silver pigeons were a good 1/4" too low in the comb for me. Used it for the first time yesterday, and used your other 525 vid to remove the ejectors when cleaning the gun. I couldn't believe the crud that was in the rebates in the back of them. Keep up the good work. You're right about the sound when it closes Jon, a reassuringly solid clunk. Could do with a review of (well) used .22 rim fires, a "what to look for" "best value for money", type thing, I got an FAC with my SGC :-)

Hello John; Being a native Hungarian I certainly enjoy your taste in music, that is if you select the background music. Of course I also very much appreciate the imparted very useful info. Cheers. Lajos

A good idea would be to show what you do from start to finish when someone brings in their gun for a regular service. I think people are put off taking their gun a for a service at all as they don’t know what happens and if it is even worth it. I have had my gun for two years now from brand new and would love to know if I should take it for a service but not knowing what goes on fills me with dread! Thanks!

A little trick I always do when changing the very powerful ejector or mainsprings is to loosely tie a piece of cardboard or paper to the spring, then if it does fly across the workshop it doesn't bounce very far and is easy to find.

Fantastic review changed my mind I was going for a beretta silver pigeon for my first shooter. However after watching a few videos from TGS I will be purchasing the 525. Great content as aways.

A fine example of a Browning 525 you have there. Beautiful gun, both aesthetically and mechanically. Would love to have one of those!

I could watch this over and over just for the music.

After watching this video multiple times I finally bit the bulle... err... cartridge... and bought one on Saturday. Chopped in my 690 for it, cool configuration with an adjustable comb and trap forend. Basically a boring Ultra XS.. Yet to shoot it but feels fantastic in the hand and fits like a gun. Cheers for the in-depth review Jonny, helped massively!

Great video! I love my superposed and would love to add a 525! Keep up the great work!

Just bought one of these yesterday mate so keen to get it now feels nice

Please can you do a video on how to fit the bar for auto safety 👍

I love my 325 but I might just upgrade now what a great review cheers Johnny 👍🏻

The comparison you did ten months ago between this and the sp1, towards the end you wouldn't pick one over the other... Well now we know fanboi haha. Good choice. Shame Australia never got the 686E Evo tho, beautiful looking gun. Cheers for all the great reviews, peace from Australia mate!

Great review. I was considering the 525, but eventually went for the 725 mk2.

Miroku Browning you can't go wrong!

Beretta 486 review please! Good choice on music btw.

Excellent review! Very classy piece of gear. Very nice camera work!

Great review , thank you !!

Please could you consider doing this for a 692, would be amazing and super useful.

Wondeful review. Thumbs up. I got a question and hope somebody can help. Now, I fell pretty much in love with the 525 SL (Laminate) with the adjustable stock. I am a lefty. Will this stock fit a lefty or do I need a lefty version of the stock? Thanks in advance and cheers from Germany!

Really enjoy the videos!is there any reviews on the b25 A1 anywhere?ill the ones I find are not in the Uk?

Fantastic review! Any chance you get your hands on an Ultra XS or even an Ultra XT to review? Cheers!

Had a 325. Changed to a 682 gold e. Couldn't get back to a Browning quick enough. Got a Browning ultra Xs now, probably have it till I finish shooting.

Of course its good it was designed by the best gun inventer ever .🙂🙂

VERY NICE REVIEW, THANKS

Hey - I like my cardboard box with the chokes bouncing around inside ;)

I pick up a new 525 at weekend there, awesome bit of kit , how easy is It to change the standard butpad to a 25mm but pad ?

How relatable is this video to the older 425s? Cheers

I would love a, small, medium and large cleaning/service video

Nice one. I am thinking of bying a 525, so this was a great video for me 👍

the 525 as I understand is the same as the US "Citori" I think. Correct?

Nice gun, but i have problems with my top lever getting hard to open, after a shot :(

Afternoon... I have a miroku mk70 manual safety... Ive bought the bits to make it auto safety, but have no idea how to fit... could you advise please. Many thanks Andy

Im caught between a new one of these 30 inch sporter left handed . Or miroku mk38 sporter 30 inch . Which would you recommend . The 525 seems to be a bit cheaper

Could you do a video on how to install an auto safe bar?

I know it's not the same as the 725 but this was was still a very informative video. I love the feel of the 725 and I'm pretty sure it'll be my next gun.

We love to hear you, but wish you'd show more takes from the items.

I’d like to see a comparison between Krieghoff, Parrize, Kolar

I have purchased a 525, and noticed when i remove the safety and give the gun a bit of a shake I have a rattle coming from the action. The rattle lessens with the safety on. It shoots absolutely fine, and had no problems with a couple hundred cartridges through it. Its a 525 Game (2015). Any Ideas?!

Question what are your opinions of a Winchester Supreme Field ? Living in the States and its my first O/U wish I could check out your establishment. Enjoy the videos I have watched and your shooting videos. Do you sell the shirts you are wearing ? cheers mate keep up the good work.

Interesting, I've wondered for a while what all the hinged trapdoor-y bits were underneath, I'll have to ask someone for a closer look, but basically it's the linkage to re-cock the hammers/tumblers?

Great review

Another good one. I think I’ll get a Browning next time.

How does one release the tension on all the springs for long term storage?

Could you guys do a video on a new browning citori cxt? I'm thinking of buying one

Nice review. Identical gun to my own, which I purchased used a few months ago. Any idea what would cause the forend on mine to be a little tight to remove?

What is the difference between this 525 and the Browning Citori Sporter? Do they use the ssame action?

Are these only available in Europe? They're listed as "Discontinued" on the Browning website in the USA.

I could use some TGS help with my 525...having some misfires in the bottom barrel. The hammers are cocking but the trigger isn't biting for a few clicks every 3rd or 4th time I load...cycle the safety and it works...something to do with the inertia block? Replace safety spring thingy maybe? Trying to diy so I have it for the next shoot rather than leaving her with a gunsmith

Looking for my first shotty (for clays only, all disciplines) I've shot a little and prefer the Brownings over others. 525 or spend the extra on 725? Sporter or trap? Thanks

Hi.. Would you suggest 28" or 30" for game shooting? and Would you suggest a Game or Sporter version for game shooting? Cheers!

From what I saw in this video it seems that dry fire this gun does not cause any harm right

HeeeeeeEEEEEERE'S JOHNNY

What is the equivalent current production model in the United States? Thanks very much!

If you dont want it to eject do you just remove the springs and put all back ?

John what's better Browning or Beretta from the base model's. ??

Hi guys, new to shooting so please bare with me, just brought a new 525 sporter, should I decide to shoot game with it at any point what cartridges can I shoot with my 525 that wont damage the gun, ie buckshot etc?

Johnny can you please tell me if there is a trigger spring in the 525? My trigger isn’t responding and will be taking it to a gun smith - however really interested to see what I’ve done!!! It has an adjustable trigger as it is a 525 sporter one. I was adjusting the length of pull when something yay happened and it stopped working! Kind regards

Hi Johnny, I have bought my first 525 12 gauge and can the mid bead be removed, I apologise as it’s a bank holiday SORRY.......

Do quite like Browning shotguns. Have you ever had an old Auto 5 in the shop?

Have you experienced bent cocking lever lifters on Brownings, if so, what was the cause and how was it fixed?

hi jonny,is it difficult to fit the auto safety to one of these,or would it have to be sent back to browning?

what do you make of the revo shotguns in particular the field pump and tactical 12 gauge?

B525 question… Mine came with 3 different trigger blades anyone know advantages of the different types. Cheers

Can you do one of these on the beretta 692?

👍👍👍👍Super👍👍👍👍

Бессмертное творение Джо Мозеса Браунинга!Никакие Бенелли и в подмётки не годятся

S

Why do these so called experts not apply some lubricant wether it is oil or grese before assembling a new gun before using it ?

demonstration NULLE on n' ouvre et ne ferme, jamai un supperposé sur les c:ôes, cela endommage à la longue l'ajustage du fusil...

Next time review focus in camera, its very bad !!! Best Regards

My Baikal has nicer looking wood THE DEVIL IS IN THE DETAILS

NO SE ENTIENDE UNA MIERDA LO QUE DICE TENDRIAN QUE PASARLO A CASTELLANO PARA AMERICA LATINA NO TODOS SABEMOS INGLES Y NO ME INTERESA SABERLO QUIENES SON LOS INGLESES Y LOS NORTEAMERICANOS MAS QUE NOSOTROS '????????? GRACIAS

Please do a video on how to fit the bar for auto safety 👍