Honda's Newest HRN216 Mower in 2023: Good? Bad? Ugly?

Рет қаралды 82,315

Күн бұрын

More of a technical review, not an unboxing. Honda has made lots of changes to their latest residential mowers: the HRN216 sold in many big box stores. This review for 2023 walks you through all the latest and greatest changes, both the Good, the Bad, & the Ugly. If you haven't seen theses mowers yet in your shop, rest assured you will soon.
00:00 I'm not Blondie
00:45 Mower deck and oil filler tube
01:34 Fuel filler and top shroud
04:03 Control cables
04:33 Carburetor and airbox
05:33 Wheels
07:28 Transmission
07:57 Handle bar storage
08:43 Carburetor gaskets
Here are the tools I like and use most often:
Magnetic spark plug socket set: amzn.to/3CzmpvO
Tachometer: amzn.to/3sHibiH
Vessel Megadora JIS screwdriver set: amzn.to/363RFqO
Channellock Bent Needle-nose pliers: amzn.to/3I5DbnA
Long 1/4 Quick-connect Torx Driver Bits: amzn.to/3HUNgnm
Spark Tester: amzn.to/3CxW2qi
OTC Leak-down Test Kit: amzn.to/3CyUhJn
Compression Tester: amzn.to/3IWd6sp
Wear your safety glasses, or you'll shoot your eye out. Try on some gloves. Take off that spark plug boot. Clean your room. Open the windows, those fumes are nasty. Just 'cause I do it, don't think it's the end all, be all solution. There's plenty more ideas out there, I can't take responsibility if you slice off a few fingers after watching my videos. And don't just pour that toxic stuff down the sewer or in the ditch, dispose of waste responsibly. Just be safe, OK?
Follow along with me elsewhere:
/ thelawnmowerlady
the-lawnmower-lady.blogspot.com/
Titles, opening graphics, and music by AbleVFX.
Any links to products are likely affiliate links, and I may earn a small commission from qualifying purchases (Thank You!), with no additional costs to you.
Disclaimer: The content of this video is purely for my entertainment, and is available to you for informational and educational purposes only. It's not substitute advice from small engine mechanics with professional training and certifications, nor does it create any kind of relationship between the The Lawnmower Lady and you. Your situation may be different, and the The Lawnmower Lady makes no warranties, express or implied, as to the fit, accuracy, or applicability of the information shown in this video, and implies no guarantee of results. The Lawnmower Lady and any sponsors of this video are not liable for any damages of personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any parts and procedures represented in this video. You are using the information presented in this video solely at your own risk.
#HRN216 #honda #GCV170 #lawnmower #smallenginerepair #DIY

Пікірлер: 358

@TheLawnmowerLady 2 жыл бұрын

If this video helped you, please consider clicking on the THANKS button above 🙌 Here's how to change the drive belt of this mower: kzfaq.info/get/bejne/otl-d9Jjvt3SnJ8.html

@81bajaj 2 жыл бұрын

Super creative regardless! Top notch!

@wallebo 11 ай бұрын

To The Lawnmower Lady: I was impressed that you mentioned that the cover came off with a single JIS screw and that you used a Vessel screwdriver which is made to JIS standards as they are the company that pioneered the standard. Most people don't realize that this is not a Phillips head at all. So, thanks for letting literally thousands of people be exposed to this fact which is not commonly known. Also, many have a tough time removing the hold down screws on Honda automobile rotors. They strip out easily because most people don't know that they are built to JIS standards (now known as DIN 5260 standards which replaced JIS standards years ago). I made the switch and haven't looked back since. JIS/DIN 5260 can replace Phillips but Phillips cannot replace JIS/DIN 5260. Vessel is a top brand as is Wera. I will never buy another Phillips screwdriver again and have given most of my Phillips screwdrivers away already. Thanks for the great content.

@TheLawnmowerLady 11 ай бұрын

I appreciate you watching. I wish I knew about JIS screwdrivers 15 years ago when I was stripping out all those brake reservoir screws on motorcycles. LOL Cheers!

@wallebo 11 ай бұрын

@@TheLawnmowerLady Thanks for your thoughtful reply. Really enjoyed you going the extra step with the good, the bad, and the ugly motiff. I wish I knew about them 48 years ago when I got my first Honda motorbike. I had no idea what those dimples on the screwhead meant. I have stripped and drilled out my fair share of Honda automobile rotor screws in my day because I didn't know about JIS at the time. I happened to be looking on KZfaq in anticipation of changing out the brakes on my friend's Mazda 6 when I ran across a short video in which the man explained why people such as myself were having difficulty with the rotor screws. Believe me, I paid attention. I studied your video and learned quite a bit as my brother is thinking of buying this same lawn mower. Kudos for all of your hard work.

@cobra-he9xj 3 ай бұрын

I'm a multi-degreed OG powertrain engineer who has been wrenching on small engines for decades. This was an impressive overview. I love listening to experienced people who tell you the important aspects of a product. Awesome. 👍🏻

@TheLawnmowerLady 3 ай бұрын

Thank you very much! I appreciate you watching. Cheers!

@StevesSmallEngineSaloon 2 жыл бұрын

WOW! Educational, informative, entertaining, great video....👍

@TheLawnmowerLady 2 жыл бұрын

Thank you Mr Steve! 👍 Cheers!

@appleztooranges Жыл бұрын

You got Steve approval! Damn lol.

@jeffreyk5933 2 жыл бұрын

Outstanding demonstration of how a product review is to be done! There were no faults in anything you did or said, keep up the great job.

@TheLawnmowerLady 2 жыл бұрын

Much appreciated Mr Jeffrey! I appreciate you watching!

@TLMD 2 жыл бұрын

Now this is a great video Stella! You just keep getting better and better. I am inspired!

@TheLawnmowerLady 2 жыл бұрын

You're the best Sgt. I appreciate you watching!

@bradcozier6623 2 жыл бұрын

I appreciate your last video on changing the belt. It's the only one on the internet worth watching!!! For the belt part I also could not locate the "correct" one, but 22431-VH7-K00 was a perfect fit and has worked flawlessly

@TheLawnmowerLady 2 жыл бұрын

Glad you found that Mr Brad. I searched for a while, even on the phone to attempt to determine what the actual dimensions were to substitute. There are some other numbers in the "description" 39.3 or something? Never figured out if those other numbers described any dimension or what. I appreciate you watching!

@G.G.001 2 жыл бұрын

Just bought the HRN yesterday. Glad i chose Honda this time, it's a great residential mower.

@TheLawnmowerLady 2 жыл бұрын

Honda makes good quality mowers for sure. Thanks for watching!

@BrucesShop 2 жыл бұрын

LOL The good the bad and the Ugly. I can see the shroud cracking. I like the nut removal on the carb. The old ratchets seized when dry. Good call. Thanks for the bowl seal hint.

@TheLawnmowerLady 2 жыл бұрын

Yep, Mr Bruce, I can't retire my M6 studs yet. Maybe some day. I appreciate you watching. Cheers!

@Smuddpie 2 жыл бұрын

Now *that’s* a review! Thank you!

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching. Cheers!

@tonym6920 2 жыл бұрын

I’ve had that mower for about two years now, I have no complaints. It’s a lot lighter than my older HRR216 and it’s a lot more maneuverable. It all comes down to the maintenance you provide. Treat your mower casually and it will become a casualty! Thanks for the vid., 👍👍

@TheLawnmowerLady 2 жыл бұрын

You're right about that Mr Tony! Cheers!

@captainamerica9353 2 жыл бұрын

Tony M , well I had an older MTD I bought used years ago. The engine was fine but the hardware was junk, so bought a new HRN216. I realize the Honda is a bagger and self-propelled, but it's big and heavy, I think too much for a smaller lawn. I cannot imagine how heavy your old one must have been.

@wikeddf 2 жыл бұрын

Same here. Still love this mower!🥰

@BBSE29 Жыл бұрын

Very nice review on the Honda HRN216 Mower. Thanks for sharing this information with us. 👍🏼👍🏼🙂🙂

@TheLawnmowerLady Жыл бұрын

I appreciate you watching. Cheers!

@Big_Johns 2 жыл бұрын

Very nice video and review Stella Eastwood, you made me laugh with the intro. 🤣👍

@TheLawnmowerLady 2 жыл бұрын

Glad you enjoyed it Mr John! 😀

@Big_Johns 2 жыл бұрын

Thank ya ma'm

@makrobins 2 жыл бұрын

great intro and review thanks Stella

@TheLawnmowerLady 2 жыл бұрын

Thank you kindly Mr Mark! Cheers!

@benjaminleslie3155 Жыл бұрын

Very detailed and comprehensive overview 👍👍👍

@TheLawnmowerLady Жыл бұрын

I appreciate you watching!

@whip-its_dad4239 Жыл бұрын

Thank you for showing how the wheels come off . Very good video , thank you .

@TheLawnmowerLady Жыл бұрын

Glad to help. Cheers!

@garyclifton2180 2 жыл бұрын

Very informative video Clint nice to see love how you no so much only bit you didn't say was the green knob on the Dec brilliant video x

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr Gary! That green knob controls the mulch baffle on the under side of the deck. In retrospect, I guess I skipped over it as it was not much different than on previous mowers. Cheers!

@andersforrad 2 жыл бұрын

Nice! Gave me some great laughs - Cheers Stella! 👍

@TheLawnmowerLady 2 жыл бұрын

Glad you enjoyed it Anders! Cheers!

@StevenCampbell1955 3 ай бұрын

I have just bought a 216 and this was a very good explanation of the workings. Thank you, Lawnmower Lady.

@TheLawnmowerLady 3 ай бұрын

Glad it was helpful! Cheers 🥂

@edwardburke9181 2 жыл бұрын

Nice video stella very informative loved it thank you

@TheLawnmowerLady 2 жыл бұрын

You’re welcome Mr Edward 😊

@wilenelson1810 2 жыл бұрын

Awesome!!! 🇺🇸💀🔧🔩🔥🔩🔧💀🇺🇸

@donnasmith2079 2 жыл бұрын

I just got this lawnmower today. And I love it. So much easier to mow my hilly yard now.

@TheLawnmowerLady 2 жыл бұрын

Awesome Ms Donna! Cheers!

@kansasgardener5844 2 жыл бұрын

I just bought my first Honda also. Love it!

@almclean4835 2 жыл бұрын

No idea what you’ve been talking about, to busy laughing at the intro. Superb😂😂😂

@TheLawnmowerLady 2 жыл бұрын

😅 LOL

@ninazeng6036 2 жыл бұрын

Nice job!

@jcheysel1 2 жыл бұрын

Just purchase my HRN216 over the weekend. Love it

@TheLawnmowerLady 2 жыл бұрын

It's a good mower for sure. Thanks for watching. Cheers!

@GuysPlayingWithTools 2 жыл бұрын

Love the video. Hate the tabs holding the lid on. I bought one a few weeks back and it took me 5 minutes to figure out how it was held together and another 5 because the tabs didn't want to let go. The motor did run pretty sweet though.

@TheLawnmowerLady 2 жыл бұрын

Yep Mr Bill, I fiddled with a while, then decided it would make a good video. Mr Bruce mentioned he though the shroud would get cracked easily. He's right. Cheers!

@INSIDEHOUSEGARAGE 2 жыл бұрын

this was very informative, I appreciate this video.

@TheLawnmowerLady 2 жыл бұрын

Glad it was helpful Mr IHG! Cheers!

@mgomez5606 2 жыл бұрын

TY for illustrating how the engine shroud comes off.

@TheLawnmowerLady 2 жыл бұрын

I appreciate you watching. Cheers!

@cunguyen53 Жыл бұрын

I love your opening as you start video Thanks

@TheLawnmowerLady Жыл бұрын

Thanks, I try to have a little bit of fun every now and then. Cheers!

@territodude 11 ай бұрын

Loved your video, great sense of humor, with the Clint stunt. And exactly what I needed for buying one of these for my son, who just moved out. Too bad about the cheesy missing wheel bearings, and cable but maybe some lithium grease or needle bearing instead of the bushing could beef that up like the old Toro's have in them.

@TheLawnmowerLady 11 ай бұрын

That certainly won't hurt. I appreciate you watching. Cheers!

@LewisMowersandBoats Жыл бұрын

Love the intro 😂😂😂 great video 😊

@TheLawnmowerLady Жыл бұрын

Thank you!! 😁

@JungleBobRepair 2 жыл бұрын

First off I love Clint Eastwood!I haven't worked on one of those yet,but I do like the fact they went to studs and you don't have to take off all the baffles to change transmission.

@TheLawnmowerLady 2 жыл бұрын

Those are some positive changes Mr JB. I just hate they cheaped out on the wheels. Most Hondas push like a dream, these won't last. Cheers!

@JungleBobRepair 2 жыл бұрын

@@TheLawnmowerLady I guess they have to cut corners somewhere!

@appleztooranges 2 жыл бұрын

Debating on upgrading my Honda hrr216vka to the hrx217 with Nextel mastic deck. Thanks for making this video and posting on my Reddit Honda mower page!

@TheLawnmowerLady 2 жыл бұрын

I really appreciate this. Thanks! I try not to be pushy in promoting my vids on Reddit, but try my best to add to the conversation in a meaningful way. Cheers!

@appleztooranges 2 жыл бұрын

@@TheLawnmowerLady awesome! I’m more into snowblowers but been collecting everything Honda. I’ll watch your video on changing belts

@HobbyMotorDK 2 жыл бұрын

Super review Clint 🙂

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr Claus! 👍 have you seen these newer mowers in Denmark yet?

@HobbyMotorDK 2 жыл бұрын

Yes Ive got a few customers running these engines

@Sparks52 2 жыл бұрын

The HRN216 GCV170 engine series replaced the HRR216 GCV160 engine series. The HRX is the next tier up with GCV200 engine. Just bought the HRN216VKA recently and very happy with it. Mowers shouldn't be stored outside exposed to the weather; if there is no garage or shed, it should at least be kept covered. Do the minimal maintenance on them with oil and filter changes, blade sharpening, and use STA-BIL in the gas, and they'll run well for many years. The Honda replaced a 15 year old Craftsman with B&S engine that still runs OK with very minimal maintenance (made by Husqvarna for Sears). Showing its age though and parts - other than the B&S engine - are mostly discontinued. Wouldn't buy a new Craftsman though (junk). IMO, the Honda HRN and HRX are among the best residential gas mowers.

@TheLawnmowerLady 2 жыл бұрын

I've been a Honda fan for many years. Too bad they had to cut some corners to stay competitive. Thanks for watching. Cheers!

@beakittelscherz5419 2 жыл бұрын

BTW love your law'nOrder content... Keep em coming 👌😎

@TheLawnmowerLady 2 жыл бұрын

Thanks! Will do Ms Bea!

@waynestefinashen239 2 жыл бұрын

Extremely well put together video Stella, time to move over Taryl there is a new sheriff in town and her name is not Big John!

@TheLawnmowerLady 2 жыл бұрын

Haha! Thanks Mr Wayne! I couldn't fill those shoes. I appreciate you watching.

@jakew9887 Ай бұрын

Great video. Thanks

@TheLawnmowerLady Ай бұрын

I appreciate you watching. Cheers!

@iamherenotheretobe 2 жыл бұрын

I love this mower, maintain it, and it will last for years and years. I luckily have the ideal storage situation and keep up on my maintenance. As far as the wheels go, I'm sure they'll last just as long as most of the residential ones will, maybe longer. I've always popped my wheels off and spray a little lithium grease on them anyway once a year. Rust ain't much of an issue with proper storage and maintaining the deck. Usually treat any rust right away (havn't had any), cutting wet grass clean... it off right after and run it to dry it out, and spraying some fluid film on the underside in those wet situations help.

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching. This same mower just came back to me, and I'm sad to report, the front wheels are very wobbly. And the rear drive wheels almost smooth. There's a lot to like about this mower, and it sounds like you take care of it well.

@iamherenotheretobe 2 жыл бұрын

@@TheLawnmowerLady No problem, definitely good content. I do some small engine repair on the side myself. I still keep my old mtd with a old school 3.5hp flat head briggs in storage as a backup. My first as a home owner, I retired it for the honda after about 10 years. Just way underpowered for the grass and got tired of the fuel boiling in the gas tank in the summer heat. So far no complaints so far and I've had the electric start version since they introduced them.

@joetroutt7425 Жыл бұрын

All I can say is, stop mowing wet grass.

@iamherenotheretobe Жыл бұрын

@@joetroutt7425 My days off work may require it. Flip it, spray it off with a hose, dry it and whatever lube I have handy, think I used wd40 the last time because it was right there. Comes down to how you treat the equipment.

@rogermcdonald1607 2 жыл бұрын

I was expecting a cameo appearance from Clint Eastwood! Nice job Stella of reviewing the Honda. Lots of improvement to the engine area. I love Hondas to flip. If i owned a Honda mower and didnt have a place to store it out of the weather, for what those mowers cost , i would store it in the living room! Lol. Stay safe Stella.👍🔧🇺🇸Roger

@TheLawnmowerLady 2 жыл бұрын

Thanks Mr Roger! 👍 I appreciate your watching. Cheers!

@atlantajunglepythons1744 2 жыл бұрын

I think a grill cover for 15 used/$30 new and maybe weatherize the high end of the cables, at least some red+tacky + a squirt of rtv

@TommyG11814 2 жыл бұрын

For me in gas power mowers it's always Toro, I've been in my home just over 40 years and I'm still on my second Toro. 1st one was 26 years old and the one I have now is still in use.

@TheLawnmowerLady 2 жыл бұрын

You're right mr Tommy. Toro has been a premium brand over the years. They did outsource some of their lower end residential mowers to MTD a while back. Almost any mower purchased more than 10-12 years ago is a far superior machine to what is generally available on the market today. Thanks for watching!

@TommyG11814 2 жыл бұрын

@@TheLawnmowerLady great video

@cobra-he9xj 3 ай бұрын

Yeah my Toro recycler purchased at HD 25 years ago has really impressed me. I'm sure the new models don't go nearly that long.

@mikel6787 Жыл бұрын

Sometimes after I do extensive research while shopping for a new lawn mower. I get so overwhelmed and confused. When I think I found one that I can afford and use. I'll also find informative vids like yours that change my mind lol. It's a good thing and I thank you for exposing some things that matter to me! Because the manufacture or big box stores won't show it. What I'm shopping for is a Self Propel Rear Wheel Drive, gas, 22" or 21" cut, rubber wheels preferably, strong engine for less than a 1/2 acre lot, mulcher, bagger, variable speed preferably, and NOT that personal pace thingy Toro has on their mowers. That just doesn't make any sense or look right to me. I have an old Craftsman 190cc, RWD, 7.00 torque, model #ended in74541. Bagger torn and cant get a replacement anywhere. And the self propel works half the time. This thing was beast for 11yrs. Now everything is so damn expensive!!

@TheLawnmowerLady Жыл бұрын

I hear ya! If you can still find the HRX models, I should consider that. With the exception of the engine itself (it is the newer GCV 170/200 version like this mower) it maintains most of the better characteristics the the HRN line omitted for cost savings. Ball bearing wheels, better control cables, better drive belt baffle to keep debris from fouling the belt, lightweight yet durable poly deck, etc. Even though Honda will cease producing push mowers this year (maybe next, I forget), they are a far superior machine, and should have plentiful parts supplies well into the future. Hope this helps. Cheers!

@philliphall5198 Жыл бұрын

Yep it’s unreal even for parts now

@teshuvahemmet3036 2 жыл бұрын

Thanks for the info

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching. Cheers!

@simons.collins925 3 ай бұрын

Honestly, this video is refreshing.

@TheLawnmowerLady 3 ай бұрын

I appreciate you watching. Cheers!

@everybodysjonathan 2 жыл бұрын

Great video. Still love my HRX 😎

@TheLawnmowerLady 2 жыл бұрын

That's a good mower Mr Jonathan! Thanks for watching!

@dadsworkshopbykipplabrie7982 2 жыл бұрын

My coworkers say the same thing. I feel bad because I recommend the new HRN over Toro TO SOON! The more and more I used this $600 over engineered machine, I noticed an uneven cut pattern after mowing, along with my coworkers plus MANY online reviews confirmed my same observations. "This lawn mower leaves several un-cut grass blades" same goes for the old HRR model, but not as noticeable. I called Honda customer support, and they recommend that I lower the deck and make shorter cutting swath. At this point I reverted back to mowing with my old HRR and put the HRN in timeout.

@TheLawnmowerLady 2 жыл бұрын

I honestly think they cut too many corners on this new model. There are some good things, but too many cost cutting IMO. ex: no baffles or guards for the belt travel. Thanks for watching.

@dadsworkshopbykipplabrie7982 2 жыл бұрын

I totally agree with you, I can tell you know your stuff. The new HRN is definitely more cost effective to manufacture and even with her new hiccups the HRN is still far more superior to your "Walmart Special" or any MTD rebrand product. I'm not a fan of the new single front and rear wheel axle adjustment but like you said Hondas plastic is pretty legit, and what I really dislike the most is new push rod engine design, Honda really set themselves apart with their signature "Overhead Cam" engine, I mean it had a freaking timing belt!!! I thought that was so unique for a single cylinder engine. When it's all said and done, I still like my Hondas but recently I only recommend TORO to friends and family.

@TheLawnmowerLady 2 жыл бұрын

@@dadsworkshopbykipplabrie7982 I’ll be interesting to see the insides of one of these newer GCV engines. No doubt, removing the timing belt mechanism accounted for a good deal of their parts reduction on this engine design. I’ve got three videos on this mower. All from the same owner, over about a six month period. The wheels are already wallowed out and wobbly on the front. The rears are not far beyond I suspect, even with that bushing in there. At least the HRR series still had bearings in the wheels.

@davidcurnutt9584 2 жыл бұрын

Nice! I really appreciate the tips and tricks. I have yet to work on one of these models and would have been lost without your help. My only question is, was that an NGK spark plug? And did it taste like rice?

@TheLawnmowerLady 2 жыл бұрын

LOL ! I honestly don't remember, I think it's the normal NGK BPR5ES. Cheers!

@leyenda6149 Жыл бұрын

Thank you! So no side discharge? I am worried about undercarriage build-up of clippings cuz I prefer to mulch bagless. Thoughts?

@TheLawnmowerLady Жыл бұрын

That’s a huge design flaw IMO. Lots of folks report derailed drive belts with the smallest amount of debris. Thanks for watching.

@josephberkeley Ай бұрын

Enjoyed the video. I thought a lot about it and decided to buy the HRN. Reason being you won't be able to get anymore of them when they are sold out. Is it a perfect mower? No. The lack of bushings in the front wheels is irritating. But even a less than perfect Honda is still one heck of a great lawn mower. I still have my 11-year-old Husqvarna with Honda motor. Just replaced wheels, dust cover, blade adapter, belt, and blade. It's running real nice. But all of the parts are showing their age. Honda really made some great products. Hoping my two Honda powered mowers will get me to the finish line of my lawn mowing career.

@TheLawnmowerLady Ай бұрын

I appreciate you watching. Just keep an eye on the oil level. The newer engine design reduced the oil sump by about 4oz. Cheers!

@TecumsehRulesbcserk Жыл бұрын

I’ve seen some of these engines develop rod knock prematurely despite having perfect service records

@TheLawnmowerLady Жыл бұрын

Makes me wonder if the lesser amount of oil required contributes to that knock?

@brianking1138 2 жыл бұрын

It's disappointing that they went away from the composite deck. I am sure the engine will be great. Thanks for the review.

@TheLawnmowerLady 2 жыл бұрын

I agree. Thanks for watching. Cheers!

@josephnovotnak 2 жыл бұрын

The did NOT go away from the composite decks, this is the lower model. They still make the HRX series with the composite decks. This is the lower model the HRN.

@rickthelian2215 2 жыл бұрын

Thank you Stella, nice review on the newer Honda. I’m not too keen on the newer model due to not being aluminium and one blade system. I think you meant to say Pablo in the intro😀🇦🇺

@TheLawnmowerLady 2 жыл бұрын

G-day Mr Rick! I think this one had the dual blades? This was a model purchased at a big box store. It's truly a beast with that steel deck. Cheers!

@rickthelian2215 2 жыл бұрын

@@TheLawnmowerLady was looking at specs looks like one blade with another two attached, the older models of Honda 196 had 4 blade system😀 Funny enough the new decks are made of a material called NeXite on that resists breaking and doesn’t rust a lighter weight material.

@rickthelian2215 2 жыл бұрын

@@TheLawnmowerLady current models have a blade off system which stops the blades 3 seconds after you let go of the handle/bar

@alfonsotorres5767 Жыл бұрын

I believe Clint Eastwood characters name was "Blondie"... Thank you for the tips...Love this channel!!😊❤️

@TheLawnmowerLady Жыл бұрын

Yes! Thank you!

@robertmailhos8159 2 жыл бұрын

Clint,s Eastwood's character in the good bad and the ugly has no name

@TheLawnmowerLady 2 жыл бұрын

I'm glad you got the joke Mr Robert! Cheers!

@Big_Johns 2 жыл бұрын

Some of us slower viewers didn't Robert. 😩

@robertmailhos8159 2 жыл бұрын

@@Big_Johns okay 👍

@dragosmitoi3239 2 ай бұрын

HRX and HRN are two different series that goes together. HRX is premium and HRN is entry level, so you can not say that the wheels are worse, because HRN is a different series, not a newer one. You can still buy HRX series

@Turningwrenches85 2 жыл бұрын

Thank you for sharing with us this Honda it does have the good the bad and ugly but I am a fan of how to take the carburetor off with that engine 😀

@TheLawnmowerLady 2 жыл бұрын

Me too Mr John! Cheers!

@Turningwrenches85 2 жыл бұрын

@@TheLawnmowerLady cheers

@thomasdowneyjr.4162 2 жыл бұрын

Those are nice mowers just alot of money was looking at them yesterday at lowes...

@TheLawnmowerLady 2 жыл бұрын

They are a bit on the pricey side. Thanks for watching Mr Thomas!

@dm285 2 ай бұрын

If you do minimal yearly maintenance of your 216...for the vast majority of owners, there is no 'ugly' only super reliable and an awesome mower..and no very expensive batteries to buy ever :)

@Ppp-kk6hw 2 жыл бұрын

Big up from Scotland. I have the 2016 model

@TheLawnmowerLady 2 жыл бұрын

Thanks! I appreciate you watching. Cheers! Or I should say Slàinte Mhath!

@prehistory13 2 жыл бұрын

great video.. i was wondering if you've found any solution to the rubber boots for the cables? usable parts from other mowers parts catalogues that will fit ?

@TheLawnmowerLady 2 жыл бұрын

Unfortunately no, they are an integral part of the outer cable system, and get threaded onto the cables before the cable ends are terminated. Thanks for watching.

@prehistory13 2 жыл бұрын

@@TheLawnmowerLady that's a shame .. but you keep up the great work

@moevaevaeaki1112 Жыл бұрын

Great video …. 🌅👸🏽

@TheLawnmowerLady Жыл бұрын

Thank you! Cheers!

@BigBeardedBubba 2 жыл бұрын

You seem to be comparing it as if the HRN216 is a replacement for the HRX (which also had a larger version of the same new engine for the revamp) But the HRN is the entry level Honda (a few hundred $ cheaper) So it’s more of a replacement for the old steel decked HRR I guess. 🤷🏼‍♂️ I ended up getting the HRN216VYA (bladestop) version to backup my Timemaster. It’s a nice light mower…I’ve never regretted getting the bladestop version. Though it seems all the prices went up $100 since the start of the year…glad I went ahead and got one! Probably good for the repair business-lol

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching. It's a good mower for some folks: those who will take care of it and how they mow. You're probably right about comparing it better to the HRR. (It has better wheels for sure) Cheers!

@sandrajohns6242 Жыл бұрын

Hi! I really like like listening to a woman explain this stuff!👍🏻👍🏻 My problem is the self propelled hootenanny sticks in the go mode! She don’t wanna stop when I let go off the handles 🤔🤔 other than that she’s running fine. It’s a Honda GCV 160 AWD. What day you?

@TheLawnmowerLady Жыл бұрын

Thanks! I sounds like something is snagging or restricting the cable. I've seen them bent completely in two when someone folds down the handle bars, and pinches the cable. make sure it's not kinked. After that, maybe something with the thumb lever mechanism? I appreciate you watching. Cheers!

@michaelfalkenstein2544 Жыл бұрын

AWESOME

@TheLawnmowerLady Жыл бұрын

Thank you! Cheers!

@michaelhorn4540 Жыл бұрын

I absolutely love mine, best mower I've ever owned

@TheLawnmowerLady Жыл бұрын

Keep the right amount of oil in it, and you hopefully will get long life from the engine. Thanks for watching.

@royhobbs785 Жыл бұрын

@@TheLawnmowerLady I have one and I like it but Honda has taken these off the market

@TheLawnmowerLady Жыл бұрын

@@royhobbs785 Yep! On some models there is some issue with (I think?) the ACR.

@AdamAus85 Жыл бұрын

I wonder is there a wheel set you can change out and then have wheel bearings all around? I have this mower but without the drive system.

@TheLawnmowerLady Жыл бұрын

Maybe? Should be an easy swap without worrying about the gear design. The wheels look similar in size to the HRC Commercial Mower front wheels.

@walleyeye 4 ай бұрын

The father in law bent the crank on his 3 year old hrr216 so he got a new one like in your video and gave old one to me. Whole new engine block on hrn. The crankcase opens on the too while the hrr splits in half diagonally.

@TheLawnmowerLady 4 ай бұрын

Yep, total engine redesign, not always for the best either.

@appleztooranges 2 жыл бұрын

Can you do 2022 hrx217 models review like this! Thanks for the info

@TheLawnmowerLady 2 жыл бұрын

Only if someone brings me one to fix 😁

@appleztooranges 2 жыл бұрын

@@TheLawnmowerLady how far you live from Massachusetts lol

@Razorsharp1945 Жыл бұрын

Great now I know how to remove the cover so I can get to the coil Thank you *****

@TheLawnmowerLady Жыл бұрын

Glad I could help

@Razorsharp1945 Жыл бұрын

@@TheLawnmowerLady > Cheers From Sydney Australia

@TearsOnABlackRose 4 ай бұрын

What MM are we using for the wheels on the HRN 216

@TheLawnmowerLady 4 ай бұрын

12mm maybe? I honestly don't remember, this mower is long gone. Thanks for watching!

@joeraptor1 Жыл бұрын

Thank you for the great review. What are thoughts between the HRN and the HRX model? Is it it worth it to move up to the next level? Thanks.

@TheLawnmowerLady Жыл бұрын

I believe the HRX model (at least from last year) still have some of the higher quality engineering -ball bearing wheels, better cables, etc., that were there before. The underside does not expose the belt like the HRN, and the composite deck is rock solid for plastics. Thanks for watching. Cheers!

@joeraptor1 Жыл бұрын

@@TheLawnmowerLady Thanks for the feedback. Sounds like the HRX is the better bet. Have you had any experience with the commercial HRC version?

@TheLawnmowerLady Жыл бұрын

@@joeraptor1 my personal mower is an older Honda commercial mower. Much higher quality components.

@joeraptor1 Жыл бұрын

@@TheLawnmowerLady Well said. I have a Toro commercial and you can't compare those to any homeowner model. I always wanted to try out the Honda commercial but there's a big jump in price and weight over the HRX versions.

@sivucit 6 ай бұрын

Hi can i use this stud in this model in HRX217 INSTEAD OF BOLT for the carburator

@TheLawnmowerLady 6 ай бұрын

Absolutely will work to assist with assembling all the gaskets and spacers. If you mean permanently, they probably should be shorter. Thanks for watching.

@richardybanez9052 2 жыл бұрын

I Like And Love.All Info You Bring. Yet,Honda Will Not Let You Down. But There Gas Cap.Is A Joke.Any Info. On This New Honda Gas Cap.Richard.

@TheLawnmowerLady 2 жыл бұрын

Thanks for watching!

@michaeldavis6550 15 күн бұрын

So I have a question this is the VKA model which is what I had but had to return for a couple reasons one being a oil leak & other being spider web cracking all over the side of the engine block & it was pretty bad looking.. I'm getting another one cause for the money it's the best on the market for homeowners in this price range. I kinda want the VLA model with the blade stop but with the clutch I worry about it being dependable. Would you stay away from the one with the blade stop cause of more extensive parts to go wrong & should it be dependable. Thank you in advance

@TheLawnmowerLady 13 күн бұрын

The blade stop is a good thing. My concerns are more with the newer engine design, i.e. smaller oil dump means higher potential to run it out of oil. Secondly, the lack of baffles to keep debris from entangling and derailing the belt. Thanks for watching!

@michaeldavis6550 13 күн бұрын

@TheLawnmowerLady The belt guard was another concern for me but the alternative mowers on the market are just junk period. Plastic carburetors I stay away from as it's a sign of a total pice of crap. I did get the VLA & been using it a few times & I like this mower a lot & hopefully it will stay dependable but small oil capacity & belt guard & plastic cam shaft makes me worry about longevity for sure. All I can do is hope I continue to have a good experience. Thank you & God Bless.

@Tintoycar 9 ай бұрын

You have a lot of experience. Is a Honda IZY the best option in the lower budget line? Greetings from Belgium.

@TheLawnmowerLady 9 ай бұрын

I think they are a quality option for those in EU. They have basically shut down residential lawnmower production in N. America. They are (were) a far superior machine. It's a shame they shut down here. I appreciate you watching. Cheers!

@mgomez5606 2 жыл бұрын

Can you check the parts illustration to see if they put a oil seal on governor arm where it comes out of engine

@TheLawnmowerLady 2 жыл бұрын

I'm not sure, and can't look it on this phone. 😂 Lol. But I can tell you, if you overfill the GCV 160 engine past where the governor control goes in oil will leak out there. I'm assuming there's not a seal, since they cut down so many parts on this engine redesign

@suspiciousskepticism6306 Жыл бұрын

At 7:45 u show a diagram of the transmission assembly. On that diagram top right, part designated as 3, the connects to the spring marked 8.... what does that piece 3 attach to.... got everything apart to change the belt but when I unhooked the spring from the transmission It came out with that 3 piece and I couldn't figure out where it attached to..🤷‍♂️ Any help would be great. My boss wants to finish mowering her lawn and I'm not trying to buy her a new lawn mower..🤦‍♂️ Thanks

@TheLawnmowerLady Жыл бұрын

If you’re referring to that folded flat metal bracket, you’ll find a slot, almost impossible to see, but that’s where the bracket fits in. The spring tension holds it in place. Hope this helps.

@suspiciousskepticism6306 Жыл бұрын

@@TheLawnmowerLady Thanks darlin'... Hopefully I can knock this off my charitable help gone wrong todo list today and focus on not mowing my own lawn for once, LoL...🤦‍♂️ Have a good morning and enjoy the rest of your day..💯

@davidbrown-55 2 жыл бұрын

What fuel should I run in this mower? Just purchased one. Thank you

@TheLawnmowerLady 2 жыл бұрын

Ethanol free. If you are in US or Canada, go to pure-gas.org to find the closest station to you. Thanks for watching!

@brianmcglew2117 2 жыл бұрын

And the Oscar goes to Ms. Stella, for her role in the good, the bad, and the ugly Honda. This was brought to you today by the word “fiddly”. When your watching the lawnmower lady and your wife’s new word after is fiddly! Lol… another great video my friend. Keep ‘em comin!

@TheLawnmowerLady 2 жыл бұрын

LOL mr Brian! 😂 I appreciate you watching. Cheers!

@BryanBlackburn8188 3 ай бұрын

Hi Lawnmower Lady. I am noticing wear on the rear wheels of my HRN216 mower. So, my question is Will rear wheels for a HRX216 mower fit/work on my mower? TIA!

@TheLawnmowerLady 3 ай бұрын

I wish I knew. I do know the wheels on the HRX are better, with ball bearings. The real key is the gear on the inside, if that is the same. I know on older Honda mowers, you could just replace the tread on the wheel. No sure if that is an option here. Thanks for watching.

@paulsto6516 2 жыл бұрын

Thanks Blondie

@TheLawnmowerLady 2 жыл бұрын

I appreciate you watching! Cheers!

@keyzopendoorz123 Жыл бұрын

How do you feel about the Honda gcv200 ?

@TheLawnmowerLady Жыл бұрын

Not sure yet. This engine has been redesigned with significantly fewer parts, less oil.

@JFPriest 2 жыл бұрын

I currently run (2) Honda HRX 217 HYA mowers. from 2021. They have gone cheap on the wheels, and they used to have tires, Now they are just "Skins" and after a while (Which is to soon for me) they fall off. Honda has made some positive improvements, (I have been running their mowers for about 33 years) but some of them are a hindrance rather than a help.

@TheLawnmowerLady 2 жыл бұрын

I agree! They's cut some corners, badly at that. Thanks for watching!

@appleztooranges Жыл бұрын

Is your hrx hard to start?

@JFPriest Жыл бұрын

@@appleztooranges No. I have heard some of the models with the Auto Choke feature develop issues in a few years. My mowers start up on the first pull going into their third year of use. I do run ethanol free gas every time I use them. And drain the tank and carburetor bowl before I put them away for the Winter. Just bought another about a week ago since Honda will quit making them this year.

@markod7662 2 жыл бұрын

I have quite rugged and uneven terrain due to mole activity. Do you think think this mower can cut it? :) Or should i look for a mower with a stronger engine? And better quality wheels.

@TheLawnmowerLady 2 жыл бұрын

I think you should be fine. Any Honda mower is a better quality machine than most any other on the market today. Thanks for watching. Cheers!

@americandude3825 2 жыл бұрын

I’d buy this used with 200 hours before I’d buy any other push mower brand new. My number one choice hrx217vka (I have had one for 8 years love it). My second choice is the mower this nice young lady is teaching us about.

@markod7662 2 жыл бұрын

@@americandude3825 the hrx 217 vke costs here in Slovenia, Europe about 1100 euros, roughly 1100 dollars. That is tpo much for a mower in my opinion.

@WJCTechyman Жыл бұрын

So, to note some discrepancies in your video: The HRN series replaced the HRR series, which is mid to entry level machines, not the HRX series which is the premium residential models. The HRX series also gets this similar revision of engine being the GCV200 with the HRN's GCV170. Both the GCV170 and GCV200 engines revert back to a pushrod design instead of the cam in head design of other GCV and the GSV engines. This is all moot now due to the mower line stopping production this year in the US.

@TheLawnmowerLady Жыл бұрын

Thanks for watching.

@steelzmb4262 Жыл бұрын

Josey Wales...Oh my!

@hammer3921 2 ай бұрын

I’m getting white smoke on start up. Only lasts a few seconds and clears up. Otherwise it runs great. Any idea on the smoke?

@TheLawnmowerLady 2 ай бұрын

Maybe mower might have been turned on its side the wrong way? White smoke is usually excess oil in the wrong places burning off, or over filled oil in the crankcase. Check the oil level, replace the air filter if it's saturated in oil. If you must get under the deck, it's best tilt the mower back on the handlebar. Worst case, turn the mower over with the air filter side up in the air, and the oil dipstick side towards the ground.

@hammer3921 2 ай бұрын

@@TheLawnmowerLady I changed the oil today and refilled with Honda 10W30. It only took about 10oz. for the dip stick to read full (not screwed in). The 12 ounces Honda requires for this engine actually overfills it. I also replaced the air filter which did not have any oil on it. Whatever the issue was, it started first pull without a trace of white smoke and runs like a top.

@TheLawnmowerLady 2 ай бұрын

@@hammer3921 Yay! Glad you got it sorted out. Cheers!

@RideCamVids Жыл бұрын

They have fallen down so far since the original HR21 series. On those original mowers from the early 80s they not only had proper sealed ball bearings in all the wheels but you could also change the rubber tires off the wheels when they wore out the treads.

@TheLawnmowerLady Жыл бұрын

I agree. I actually own an HR215 ( that I haven’t started since 2915) Great mower with blade clutch.

@RideCamVids Жыл бұрын

@@TheLawnmowerLady I'm talking about the HR21 and 21-5 original series of mowers from the late 70s early 80s.

@TheLawnmowerLady Жыл бұрын

Ahhh, yes. I replaced one of those with this HR215 back in 2000. It was gifted to me from my Dad, and I unfortunately let the oil get too low. It overheated and seized. Not knowing then, what I know now, I would have fixed it. I regret replacing it.

@jesusdrummer21 Жыл бұрын

I was called by a nice lady. She has hrn new in box..sat for a year in her garage in the box. After set up would not start....took carb off and all this nasty yellow gas came out..quick clean on carb fresh new non ethanol..fired up 1st pull. Electric start too..battery charges when running...

@TheLawnmowerLady Жыл бұрын

Good stuff! Thanks for watching.

@appleztooranges Жыл бұрын

Do you think starting is worst on these due to emissions? My 10 year old Honda hrr216 started first pull everytime. This new Honda hrx217 I bought takes 8-10 pulls to start it. I talked to Honda and they said it’s due to running it in temperature less than 50 deg ferenheit, it’ll make the mower harder yo start. I never had issues with my older one

@TheLawnmowerLady Жыл бұрын

I honestly don't know. Freezing weather yes, but 50deg? sounds fishy to me.

@appleztooranges Жыл бұрын

@@TheLawnmowerLady thanks. Also, how do you get gas stain off nexite deck on the Honda hrx217? Any advice? Zach

@TheLawnmowerLady Жыл бұрын

@ApplezToOranges Absolutely no clue. I really only deal with the mechanics, and leave the cosmetic stuff to the experts 😹

@bombidude 2 жыл бұрын

Do you think the older 8" wheels with the bearings will go on with no problems.. like the hrr series wheels?

@TheLawnmowerLady 2 жыл бұрын

That is a good question. The mower is back with its owner, so I can't really answer that. Maybe give it a try? Many shops have a lenient return policy if the parts don't fit. You might have to pay a small re-stocking fee. Thanks for watching! Edited to add: I got this mower back a few weeks ago for an oil change. The wheels were very wobbly already.

@bombidude 2 жыл бұрын

@@TheLawnmowerLady Home Depot sells the 8" wheels with bearings in stock.. I think I'm going to try them out.. Just not sure if the drive gear is the same or not. Maybe you can tell me.. I have mine on order and will be here this week brand new. Can't wait to try it.

@TheLawnmowerLady 2 жыл бұрын

@@bombidude please let us know. I’m sure others will want to know if they fit. Thanks!

@jertres2887 4 ай бұрын

So, did they fit?

@franciscorodriguez3105 2 жыл бұрын

How change the transmission on lower mover GVC 170

@TheLawnmowerLady 2 жыл бұрын

kzfaq.info/get/bejne/otl-d9Jjvt3SnJ8.html This video is how to change the belt. I hope this helps. Thanks for watching.

@marshmower Жыл бұрын

The gx is available on the commercial model. Not exactly cheap but . . It's more like the old school ones.

@TheLawnmowerLady Жыл бұрын

I honestly think money spent on a commercial mower is well spent.

@Tricia_JoElle Жыл бұрын

I bought one 2 months ago. First time out of the box, it took many pulls. Since then, every four or five starts if I have it running, then stop to empty bag, it takes a few pulls to restart. I thought, "its new, break in period". Now, chord gets jammed.... as in, "won't pull". Loathe this mower.

@TheLawnmowerLady Жыл бұрын

I'm sorry you are having troubles. If it's any consolation (probably not, I know), you are not alone. Thanks for watching.

@resqjason2 2 жыл бұрын

can you buy older style wheels with the bearings and just put them on this mower?

@TheLawnmowerLady 2 жыл бұрын

I don't know if the drive sprocket is the same inside the rear wheels, but someone else here in the comments said they were ordering the wheels for an HRX from a big box store with a good return policy. I hope he chimes back in to tell us how they fit. Thanks for watching. Cheers!

@slowpokerodriguez540 Жыл бұрын

With Honda getting out of the lawn mower business which is sad that means no more Honda mowers for me. The factory where Honda bult all mowers has already been converted to build UTV's. Issue is parts and service will be a concern for these mowers in the future.

@TheLawnmowerLady Жыл бұрын

I think the parts problem is pretty far in the future if at all. My understanding is they will continue building the engines, just not for lawnmowers here in the US, and they continue lawnmowers in Europe?

@Fresh-tw7ev 2 жыл бұрын

In my experience these brand of Honda engines are underpowered! I use mine to edge and noticed in the spring this year when grass was at it thickest and highest the mower was bogging even at the highest cut setting of 4. It didn’t matter if I was mulching or bagging. Wish there was something I could do to get more HP where it’s needed!

@TheLawnmowerLady 2 жыл бұрын

I think the jury is still out on this new engine design. I appreciate you watching!

@atlantajunglepythons1744 2 жыл бұрын

I read the 170 has 1 more hp than previously. Also, there is a mod to increase output, probably rpm via the throttle setting. It should be easy to track down; I haven't needed to

@Carlos.Rivera Жыл бұрын

Next time dont be lazy and cut the grass more sooner.

@Fresh-tw7ev Жыл бұрын

@@Carlos.Rivera I can’t control the weather Carolos. Something named “rain” prevents many of us from cutting the lawn. And you don’t cut wet grass do you Carolos.

@carl3233 Жыл бұрын

GET SOME GOATS OR SHEEP YOU DONT WORY ABOUT NEEDING A LAWN MOWER.

@sylc6688 Жыл бұрын

I have this mower, it doesn't like dusty conditions or rough condition like I have in my front yard, lots of dust, acorns, leaves, debris even though I stay on top of it and rake several times a year. The belt is going off track and gets stuck and you lose the smart drive, I hate it. I had to replace the belt already three times in 2 years and it took me 1H30. Many users reported this issue on Honda website.

@TheLawnmowerLady Жыл бұрын

Yep, Honda really dropped the ball on this one. Sorry you are having so many problems, you are not alone. Thanks for watching. Cheers!

@GAderly-fn5ly Жыл бұрын

In Florida bearings aren't as good as bushings. If the bearings were really sealed against water they would be better

@TheLawnmowerLady Жыл бұрын

That's interesting.

@231mac Жыл бұрын

Wonder if an HRX wheel will fit on an HRN?

@TheLawnmowerLady Жыл бұрын

I wish I knew. The front wheels are probably interchangeable, the rear ones, likely will have different drive gears. Thanks for watching.

@231mac Жыл бұрын

@@TheLawnmowerLady Thanks for replying back!

@kansasgardener5844 2 жыл бұрын

As far as the wheels not having bearing's is concerned the Chinese will probably come out with a knockoff version pretty soon. Let's just hope it has quality bearings. Then again if it becomes an issue or enough people complain about it Honda might address the issue as well. I've had a chance to use mine a few times now and really like the mower 😊

@TheLawnmowerLady 2 жыл бұрын

Interestingly, the bearing weren’t even quality bearings. Just the cheap bearings common on wheel barrows, etc. I can’t imagine they were saving more than a few cents per wheel. I appreciate you watching! Cheers!