How to make solar panel / solar cell at home

Рет қаралды 6,685,911

4 жыл бұрын

In this video i will make a solar panel at home in diy method.
Board Name : Copper Clad Board FR4
s.click.aliexpress.com/e/_mqC...
Best Marker pen for etching:
s.click.aliexpress.com/e/_oEd...
Tinning material:
s.click.aliexpress.com/e/_EwP...
Small solar panel for your projects:
s.click.aliexpress.com/e/_oDd...
Note:
Ferric chloride is not available for international shipping.
You can make the silicone by adding solvent with pure silicone powder.
Maximum current 20mA.
After few hours the cell stopped working.
It may be due to impurities in solvent or silicon powder.
Solution used to etch the copper was Ferric Chloride. (FeCl3)
One table spoon in half litre of water and shake 10 minutes
with the board in it.
Be careful with any chemical.
Don't throw the waste in drainage.
*Try at your own risk.

Пікірлер: 2 000

@Lazydayyt 4 ай бұрын

Find the copper Board here at cheap price. I got 5 pieces for cheap s.click.aliexpress.com/e/_mqCrWEI Marker pen buy one get one s.click.aliexpress.com/e/_oEdFI1I

@user-qq7tp6wl9b 4 ай бұрын

Does it actually work and if yes how?

@sreekumarchandra5976 3 ай бұрын

Where from coper board and other items get

@innocentheart3847 4 жыл бұрын

Before learning how to make a solar panel at home, we all have to learn from this guy that how to draw straight lines without using ruler. 😂😂😂

@ganeshborude3964 4 жыл бұрын

🤣🤣🤣🤣

@physicsisawesome696 4 жыл бұрын

Lol 😂😂 🤣

@nessabush1986 4 жыл бұрын

He uses his fingers as a guide along the edges of the copper

@kenmike2010 3 жыл бұрын

music.kzfaq.info/get/bejne/oqpzZqqpupzIqmw.html

@westernsahara2212 3 жыл бұрын

Lol

@wisochiso877 3 жыл бұрын

Comments 95% drawing perfect straight lines without ruler. 5% about the main topic

@umairumairee9119 3 жыл бұрын

Exactly

@engineermunim7287 3 жыл бұрын

Hahahah strict teacher

@DBT1007 3 жыл бұрын

Main topic

@IOXCP9 3 ай бұрын

@@DBT1007😂

@murugananthamn746 Күн бұрын

Yes 😂

@CousinAAE 3 жыл бұрын

It was a rousing good solar panel but you achieved greatness when I couldn't even tear my eyes away from your drawing of the straight lines without a ruler.

@aroshakovida1997 2 жыл бұрын

😂😂💔

@BIackMoonCGI 2 жыл бұрын

His hand is sliding down the straight edge of the board. Isn't this obvious? It was to me.

@ewdtrey Ай бұрын

That's how drywallers do it....amongst other tradesmen

@napstertoutou9206 4 жыл бұрын

His hands are more stable than my life

@Lazydayyt 4 жыл бұрын

lol.... but that makes some viewer jealous

@Kyle0909 4 жыл бұрын

😂

@Royaltech91 4 жыл бұрын

@@Lazydayyt 😂😂😂

@proudhindu2973 4 жыл бұрын

Yes i can't even draw a single line with s ruler🤣🤣

@proudhindu2973 4 жыл бұрын

Looks like magic for me to draw a straight line🤣🤣🤣

@ahmadalami9640 4 жыл бұрын

Your freehand drawing ability is absolutely amazing!

@syedahmedfaheem2438 Жыл бұрын

Look on the supporting fingers on the corner of plate,you can do it too dear.

@limatoshi5845 2 жыл бұрын

He's an artist yes. I don't think anyone can make lines with that kind of precision ☺️

@AudioKoppler Жыл бұрын

thats an easy diy trick... he usses the ringfinger or pinky at the side of the plate to keep right distance to the pen tip

@donavanreed5137 Жыл бұрын

Ruler

@allandrake4426 Жыл бұрын

If you look he's anchoring his finger nail against the edge of the work while holding the marker in another. This is known as scribing and is a common technique used in many trades

@VictorZucchini 10 ай бұрын

Not only he is using his other winger to guide it by the edge, he also has loads of lines/ scratches in that same direction which would help with guiding the marker to go in a straight line.

@mrstupiduniverse731c 2 жыл бұрын

Lots of people talkin about how u drew those lines so straight, well Im here to solve that mystery friends...he used his ring or middle finger to stabilize his drawing path, the moment he lifts one of them that line will be as jagged as a politicians morality

@Lazydayyt 2 жыл бұрын

🤣

@MoMoGammerOfficial 3 жыл бұрын

How to draw straight line on that kind of board? Simply hold the marker and place your small finger on the edge of the board, and TRAAAAAA! you are an expert drawing straight lines. I used to do that and it works :)

@footmobonline 4 жыл бұрын

Damn! This man can draw straight lines without a ruler.

@panzernackers 2 жыл бұрын

He use other finger and the edge of pcb card as ruler

@annahoward7949 2 жыл бұрын

Thank you. This is amazing knowledge you just shared with over a million people who will pass it on to others.

@kepler_45 Жыл бұрын

Thats the job a school is supposed to do

@PinkeySuavo 9 ай бұрын

he didnt explain anything

@jimmatrix7244 7 ай бұрын

@@PinkeySuavo You need intelligence to understand just by watching.

@PinkeySuavo 7 ай бұрын

@@jimmatrix7244 Still there's literally no knowledge. It's just an algorithm on how to do a certain device. You won't know what are electrons, why he has done something in particular way. If someone has no knowledge in electronics, he will most likely don't know most of the stuff that's happening there. Ignoring the fact that this isn't amazing device and you won't do anything practical with it.

@shakemydeen29 7 ай бұрын

@@PinkeySuavook

@ajvlogs8890 3 жыл бұрын

Because of your talent, I'm subscribed and inspired

@bashirahmad4889 2 жыл бұрын

ماشاءاللہ بہت خوب جناب۔ اللّٰہ کریم آپ کو ہمیشہ خوش رکھے اور برکت عطا فرمائے آمین ثمہ آمین۔ اللھم صلی علی سیدنا و مولانا محمد وعلی آلہ وصحبہ وبارک وسلم تسلیما کثیرا کثیرا۔

@chrissumner6046 4 жыл бұрын

Very cool , but if you look closely he uses his other fingers as guides along the edge of the panel to create the straight lines 😁

@Antesdelfinadmin 2 жыл бұрын

Ok! You tray it now!!

@ezekielc2759 2 жыл бұрын

I don't know if you'll get your money back on the project but the comments on your drawing abilities make it all worth it.😄

@AniShh89 Жыл бұрын

Yeah that was a pretty damn good line he drew

@jshaw4757 Жыл бұрын

Prob cost a tenner too make so if can trickle charge a battery get your money back before long

@Eli-oz4ei 2 ай бұрын

You know I used to do that when i was still alive 😂

@righteous_entertainment8539 Жыл бұрын

Had an old teacher that taught me how to build airplanes from scratch and he had these steady as f hands like this dude does was able to draw a straight line on just about any surface free handed.

@rohanboswell5408 7 ай бұрын

Very impressive,I watched a video on 2008 this guy used burned copper plate ,was very tedious,but I totally forgot,the steps ,your video is very impressive,

@afikonyak5046 Жыл бұрын

Hello I'm afi from nagaland India and I liked this video Thank you for this video love from India 🥰

@jharish9330 4 жыл бұрын

Great, you proved the saying - practice makes man perfect. About the straight line with out using scale.

@fiend5514 3 жыл бұрын

How accurate line he draw salute man your patience

@caderbavahsiddicl6414 3 жыл бұрын

Very interesting and educative,,, thank lots brother.....

@calvinh9453 3 жыл бұрын

Dude you’re a pro at drawing perfect lines

@nadirsiddiqui9559 4 жыл бұрын

what a straight lines you draw, awesome..

@KarlA-vk4kn 3 жыл бұрын

I'm very impressed. Great work 👍👍

@sharehbutt Жыл бұрын

I know all this except how to get silicone paste. I have made numerous PCB boards. Thank you man

@papaikarmakar84 4 жыл бұрын

Used the exact material used in readymade solar panels. I appreciate👏👏👏👏

@nomokvil2044 4 жыл бұрын

Papai Karmakar Hello! :) so where can I find this paste arround and ferric chloride?

@mskinggaming4819 2 жыл бұрын

Plate banane mein aapne solar plate banane mein aapane kya kya cheez li hai Unka Naam bataen please

@attiliobastosguarnieri5416 4 жыл бұрын

Uma célula fotoelétrica tem o mesmo princípio de um diodo. Um cristal de silício dopado com fósforo e boro, um em cada lado ao ser atingido pelos fótons movimenta os elétrons que circulam entre o doador e aceitador resultando em energia elétrica. Com condutores obtemos os polos negativos e positivos. Não vi nada disso no vídeo, o que faz pensar que não passa de um truque bem feito. Mas não podemos esquecer que podemos retirar energia de um limão, colocando barrinhas de zinco e cobre. O autor tem uma boa habilidade com as mãos. Parabéns.

@palmatihagojesus4020 10 ай бұрын

¿Qué quieres decir?

@IOXCP9 3 ай бұрын

You understand very well 👏👏

@scottbrown4695 2 ай бұрын

Wow! Those lines were so straight. That was what impressed me. Change the title to "How to draw perfect straight lines with a hangover every time."

@Samsononyebuchi-vd5zz 4 ай бұрын

The truth is that i found this video helpful.

@Lazydayyt 4 ай бұрын

Thanks

@muxallopeniot9194 4 жыл бұрын

Great Video! This is one of those projects I actually want to do. I will use a ruler though.

@Lazydayyt 4 жыл бұрын

If you use a ruler it will leave uneven trails on the pad

@muxallopeniot9194 4 жыл бұрын

@@Lazydayyt Thank you for letting me know that.

@davidd2661 2 ай бұрын

You can use a lifted stencil though. For example 3D printed, if you're still interested in the topic😊

@5-minute-devops 4 жыл бұрын

Amazing, something I definitely prefer to experiment with.

@Arpitbiro69 Жыл бұрын

mesmerised by the straight lines with same spacing

@kungadic 4 жыл бұрын

quite simple !!...thank you for sharing

@heru-deshet359 4 жыл бұрын

It would be expensive building large panels this way, but you wouldn't have to worry about shattering like the glass ones can.

@platysplatys3967 2 жыл бұрын

Panels are quite resilient actually. It takes quite a bit of force to destroy one, especially if you get quality not cheapest from china.

@mrspeigle1 Жыл бұрын

@Platys Platys even the Chinese panels are getting pretty good.

@delephaerrge3529 3 жыл бұрын

Wow.. the video.. the line ruling.. the project.. this might be the best vid around. Great Job, I'm following you man

@polinenisreenivas7050 4 жыл бұрын

Need this type of practical knowledge to our future generations

@mallatv6292 2 жыл бұрын

Your creativity is out of the question. Thank you. I liked your idea. I have a similar idea.

@Lazydayyt 2 жыл бұрын

Thank you

@elected0nes741 3 жыл бұрын

LOL, the rubber glove thing was funny! 😁 Nice video.👍

@rlstrike02 4 жыл бұрын

Thanks for sharing the good ideas, how to make a solar

@nemanjarodic1049 Ай бұрын

Very inspiring. Thank you! My kids, Issy and Simon love it too:)

@rabnawazkhan760 4 ай бұрын

I have seen this after many year of its publishmnet and a lot of comment are telling that he is drawing line without ruler. Yess thats right but he he touching his little fingures to the side of the plate while drawing lines.. Beside great work u did for those who want to make theirself hand made panels...

@chewmonkey89 4 жыл бұрын

How to make a solar panel at home. Me: "Honey, do you know where I left the crystal silicone paste?"

@DrJohny-xr4sz 4 жыл бұрын

🤣🤣🤣

@Lazydayyt 4 жыл бұрын

nice joke

@somnathchaturvedi6388 4 жыл бұрын

Correct

@Dev_Anand_C 4 жыл бұрын

😅

@endurofan9854 4 жыл бұрын

what was it used actualy? rather than that that crystal silicone paste

@elektroprogramista1025 3 жыл бұрын

Hi, give me a link to the silicone powder because I can't find it and after that you could give a little more explanation but it was cool.

@Damian-Church-NZ Жыл бұрын

Youre a true geniuses brother.

@Wonderboy46Z 2 ай бұрын

If I’m not mistaken, that ferric chloride is the stuff a friend damn near got killed by his girlfriend in high school over. He spilled it on her brand new white sweater and I swear we didn’t see him for like 2 weeks after. His mom said he had mono, but we think he had a black eye and busted lip from her kicking his ass all the way home! LOL!

@ahmadsyahza3415 4 жыл бұрын

amazing content , keep up the good content

@joesphdryguvygiihuuygkytfi5131 3 жыл бұрын

Ahmad Syahza you used content twice

@oscarce7876 4 жыл бұрын

Que buen pulso¡¡¡ Buen vídeo, gracias

@jamesbenedict6991 2 жыл бұрын

Your a genius. Thanks man

@alexmomo2851 4 жыл бұрын

close to 5V already - must try this at home!!!

@arwinkrishna8951 3 жыл бұрын

Did you try it

@tamasszakal136 3 жыл бұрын

What Will be the result ?

@DarrenDIY 3 жыл бұрын

Just because its 5 v does not imply that it it powerful

@nataniyaldemerachew3025 3 жыл бұрын

so it works

@inderjairwan3265 4 жыл бұрын

His hands are more stable then actual Dr. Stranger thats why he is capable to draw straight lines without help of any scale.....

@jatinder_kaur2459 4 жыл бұрын

Exactly same I had thought

@Manjunp5490 4 жыл бұрын

Yeah maan

@gamingenius 4 жыл бұрын

If you rest the pen on your fingers and run one of your fingers along the side of the PCB, you get straight lines.

@inderjairwan3265 4 жыл бұрын

@@gamingenius yeah maybe you r right but my hands are like after the accident of Dr strange, they will staggered at some point....

@gampangpro3945 4 жыл бұрын

he use side of board by his finger to use as marking..i'm always use that technic and it works.

@user-gy9nx1vm6g 3 жыл бұрын

You got +1 ready, and love your your content💞

@theiveenthiraathiyagaraja9463 3 жыл бұрын

Thanks .It's will be helpful for my RBT PROJECT

@physicsisawesome696 4 жыл бұрын

Title : how to make solar panel Video : how to draw straight lines without ruler Lol 😂😂 🤣

@kulamnimohanta9462 4 жыл бұрын

Lol

@rajushedge9700 4 жыл бұрын

you have to do practice with the last three fingers to hold the panel to maitaime same space.

@giannispets 4 жыл бұрын

😂😂 🤣

@comeatme1981 3 жыл бұрын

Finger as a stencil or guideline..... I must be the Second smartest humanoid alive.

@physicsisawesome696 3 жыл бұрын

@@comeatme1981 lol

@krzysztofniemiec7497 3 жыл бұрын

Jestem pod wielkim wrażeniem 👍👍👍

@Play2Lose_ 2 жыл бұрын

Cześć

@Maxstewartwatson 2 жыл бұрын

Did you even try it

@anthonykyei-barffour9203 3 жыл бұрын

How does he manage to draw such nigh perfect straight lines handsfree😃

@solomonchibuzo2949 Жыл бұрын

When human being is genuine and his hands is stable than some people life.

@belajarkreatif_ 4 жыл бұрын

wow,very useful and very helpful,thank you for your knowledge👍🏼😁

@giuseppeonesto4415 3 жыл бұрын

@cauchy8888 3 жыл бұрын

A solar cell have to work for more than a few hours, as you have specified in the description. You just have made a battery (electrochemical reaction activated by light). And almost 5 Volts seems a bit high.

@amanthatthinks 2 жыл бұрын

That's exactly how solar cell works.

@cosmefulanito5933 2 жыл бұрын

@@amanthatthinks No.

@nipunagunarathne4882 2 жыл бұрын

@@amanthatthinks no

@Roninkinx 2 жыл бұрын

@@amanthatthinks 5 volts for a solar panel of that density seems way too high to me honestly.

@vanacharlasaipavankumar6331 3 ай бұрын

@@amanthatthinks No

@shaivyasrivastava4217 Жыл бұрын

That is superb, thankyou 👍👍

@topmechedu7567 3 жыл бұрын

Your videos are great.... , I am following you.....!!!!

@lenilsoncaxias1951 3 жыл бұрын

Vi que muitos falaram da sua técnica em fazer linhas retas, se prestarem atenção você apoia os dedos mínimo, anelar e médio na placa de fenolite como referência, isso muitos marçeneiros usam.

@sergiotricarico 2 жыл бұрын

Funciona! Obrigado

@deltastudios8918 2 жыл бұрын

I think this cell acted as more of a copper/zinc battery lol. The life of this will be very limited. Nice build though, and amazing lines!

@mr.fixcamer 8 ай бұрын

You are correct, your comment saved me

@atengjamhur6200 7 ай бұрын

Bravo!...good Job Friend!

@Akane_Shinde 3 ай бұрын

Your hands are very stable compared to OIS gimbals

@mikisebela8964 3 жыл бұрын

Where can I buy that crystal silicone paste and how much it costs??

@adriantang1159 3 жыл бұрын

he has a built in ruler in his hands

@franklindheguy5935 2 жыл бұрын

The straight line part got everyone's attention

@peterduxbury927 2 жыл бұрын

We all should be asking "What is the Short - Circuit Current, in full sunlight"?? Because my feeling is simply that it will not drive a few LED's or small motor. The Output in full sunlight will be measured in just a few milliamps, so don't expect that this would power your off-grid lifestyle, or even charge batteries. Just my thoughts.......A great Science Project for those who want to experiment.

@pritysinghrajput5887 4 жыл бұрын

Can you please send the link of the material used

@sunilkarki4670 4 жыл бұрын

Explain how does this work

@averelianashidayat8216 Жыл бұрын

Thank you. This is amazing knowledge you just shared with over a million people who will pass it on to others, but could you attach the measuremnet ??? Sory for my poor english😅

@creativekristan8386 4 жыл бұрын

No way how straight that is I couldn't believe it very straight

@joseadrianjaquezdominguez2787 3 жыл бұрын

where can i buy the crystal silicone paste or what other product i can use?

@sujitdassujitdas1821 4 жыл бұрын

thenks friend

@premixmpk7070 4 жыл бұрын

Waw

@vlogsZE 4 жыл бұрын

Wrong

@zexieofficial 4 жыл бұрын

Welcim frend

@bryanleo9876 3 жыл бұрын

@LazyDays Creations, what is your source for the crystal silicon paste?

@osmanosman9226 Жыл бұрын

Creative .smart guy..Tq 4 sharing

@stafffiregaming 4 жыл бұрын

Who reading comment may your parents live 100 year and I'm small youtuber here

@cletiskroeker3552 3 жыл бұрын

You keep your fingers on the edge of the piece that you are working with and hold the pencil tightly to create a straight line. Basic construction

@Gjeus 2 жыл бұрын

2021 i don't know why i am here, video funny, i want to try it :))

@KreshnaDwipayana 2 жыл бұрын

So much pratice making straight line in OSU! make perfect guy

@Kskumaran08 4 жыл бұрын

Good Idea 👍

@ericsandro 3 жыл бұрын

Very good, I already signed up! What kind of solvent and what kind of silicone did you use? Please!

@levenmerrit4782 2 жыл бұрын

Sorry for the wait..I enjoyed it. Simple..

@fickfock8169 4 жыл бұрын

amazing .....straight line

@mohitgupta7806 4 жыл бұрын

Amazing 👌 interesting 👌

@eyancrasta1556 4 жыл бұрын

Just fooling you 😂😂

@epiccompilations2264 4 жыл бұрын

Those hands had a built-in ruler.

@monke6912 3 жыл бұрын

He is the ruler

@francoisbessing Жыл бұрын

Artistic precision lines.

@bengalipoembyminakshi3917 4 жыл бұрын

Great idea man!

@maheshplumber9407 3 жыл бұрын

@audioacrylix5005 4 жыл бұрын

"After a few hours the cell stopped working. So don't try to make it." It is stated in the video description

@Kopie0830 4 жыл бұрын

Why did it stop?

@audioacrylix5005 4 жыл бұрын

@@Kopie0830 Not sure but it says this in the video description.

@Kopie0830 4 жыл бұрын

@@audioacrylix5005 Gee, I know that captain obvious. I'm asking for an explanation why it stops after a few hours and not longer like what the cause of it stopping.

@audioacrylix5005 4 жыл бұрын

Don't Know Good Luck :)

@mohabalrouby5534 4 жыл бұрын

@@Kopie0830 Gee, he doesn't know. You dont have to bitch about it.

@fezilebrianwitbooi1229 4 жыл бұрын

He's using his mid finger to help draw straight lines, watch his mid finger

@bernardvilleneuve4855 3 жыл бұрын

De l'OM

@ljupchokuzmanovski1744 2 жыл бұрын

Hi, Why you use crystal silicone paste? Thanks for answering

@richardbruce1565 3 жыл бұрын

So to make a perfect solar panel, I would need to learn how draw a perfect straight line, anyways good video

@markkennard861 3 жыл бұрын

Good to see volts but I bet the current isn't enough to light a led.

@mirhuseynagha 3 жыл бұрын

make plenty of panels and set a voltage regulator

@Graeberwave 4 ай бұрын

Yeah, that is why he measures it in the beginning with a ruler so you can see how many volts per square foot can be produced. Sounds like your brain can’t even light up an LED.

@markkennard861 4 ай бұрын

@@Graeberwave dont be nasty.. I didnt see that bit.. my bad.

@Graeberwave 4 ай бұрын

@@markkennard861 you could Bing it if you’re feeling nasty now

@markkennard861 4 ай бұрын

@@Graeberwave bing it ?

@lostandfound459 4 жыл бұрын

For all of you that are so amazed at drawing lines straight...it's simple. Woodworkers do it all the time. Hold marker firm with thumb and index finger, keeping next finger along the edge as you move marker towards you. See @ 0:26.

@sg8nj 2 жыл бұрын

Great caught, I got it

@kavya914 2 жыл бұрын