Very helpful! I have an old John Deere MC (1951) and I believe the process is very similar. Much better then trying to go by the MC Manual!

Thank you for making this SO MUCH More Clearer than the Tech Manual!

I just wanted to say that I really appreciate this video! I bought a JD 350B and it wouldn’t pull or brake well on the left side. I adjusted it like you said and it worked!!! I was worried I got a bad deal at first. My wife was starting to look at me like I made a mistake but you saved my ass! Thank you kind Sir!

Thanks for the detailed instruction. It's so much better hearing the details, rather than trying to understand the manual. Thanks again.

I just fixed one of these in the bush, thank you for a clear and concise video.

Amazing. I just lost steering on my loader while in a ravine by my house and was worried it was going to be a nightmare of pulling things apart to fix it. great video thanks for posting it!

Thanks. Just bought a JD 350B. I have a lot of work to do. This is a huge help!!

Glad you were working on yours same time I was working on mine, really helped thanks.

Great video. Great job explaining your steps and reasoning. I have a JD 400G that I need to adjust brake and levers. Not same as yours but helpful seeing the process.

Big job, well done! Watched your videos on the rebuild. I agree with the way you did everything. Nice work. Glad to know there are other people in the world besides me that are willing to get dirty! 😄

Thanks for the video. Just followed your video and all worked well...steer brakes were nearly non existent until adjusted...

Thanks for the in depth video! i recently bought a 72 350B my left clutch isnt disengaging and the levers are way out of sync! i will be coming back to your video for reference when i get to adjusting my brakes/cutches!

Thanks a lot man. You’re really detailed and it helps a lot!!!

Great explanation, I have a 350c and this is the last thing I need to do.

Very good explanation of procedure and tips. Good job...well worth my time.

Very good information.

Awesome video thank you. I have a jd 450, hopefully it is a similar setup

Awsome video. Thank you for the great tutorial 👊

Thanks for the video you're a great guy

Excellent video. Thanks

you might on the yoke adjustment either get a new yoke.. looks like its a standard yoke.. or if you only need 1/8".. run a die down the stud and make 3 more turns of thread.. any more than that you will run the end of the stud into the Eye on the other side. . that is kinda an important part.. might be worth finding a new one or ordering a JD version.. if its not $500.00. thanks for the complete adjustment procedure ..

excellent video thank you for the great and informative video

Great instruction, Thank You!

Good video, Helpfull

Thanks

Good 👍 job 👌

Hi sir great video.. Could you sometime maybe do a video explaining how the brakes and steering work on that machine. Ok thanks and happy equipment operating

thank you for posting

I wonder if anyone can help me. While attempting to remove the final drive/steering clutch assemble from the tractor, i forgot to release the brake adjustment under the seat of the tractor. While pulling the assembly off the tractor, the brake band has bound around the brake drum and at the brake adjustment bolt, the shaft that adjustment bolt sits on has moved outboard and slipped off th surface it sits on and dropped down about 3/16". this has caused the adjustment bolt to move outwards and is now under the tractor housing, heavy cast main transmission. I am now unable to get a socket on the adjustment bolt, nor am i amble to get the shaft that bolt rides on back up into its proper position. I am stumped and not sure what to do. Possibly the adjustment bolt is seized as well. any ideas to help woudl be greatly appreciated. Thank you

the power steering rams are all kinda wibbley wobbley how do you know when you have all the slack out of them?

I have been watching one a neighbor has, he is thinking about selling it. If he prices it right, I want it. Videos like this makes me comfortable to know the how to on the unit. Where did you get the manual ??

Trying to get the clutches and brakes ajusted on my 350 seems the brake ajuster is seized on the linkage pin trying to find a way to free it up any info on how the linkage comes apart might help

Were you located at I'm in illinois

good job and video, any chance you could do this for a 450c?

Did you replace any of the ball joints in the steering clutch linkage?

I have a JD 350B dozer. I Was using it today and went to back up and it wouldn't go in reverse, so I put it in forward and it won't go forward either. It's been running great. It has a handle on the left side for forward and reverse. Any Ideas of what could be wrong?

Well done, well explained, big thanks, exactly what i needed.

How can you tell if I’m or out of detent. On 450b that 3/4 head is in a side panel and can’t see the concave washer. I can tighten it but not sure about detent

I have a TD 7 International you know if is thesame, dont turn dont have Sterling, and when i bring down the plate stock on the Dirt and the shaft from engine to transmision stop spending but the engine keep running

Hello mechanic

Can I get some advice. I am looking at a jd 350 straight (I think) with the right side brake band frozen to drum. Any advice in how to free it up so dozer can be moved for clutch and brake repair? Thanks. Jim

What is the shift lever under the trans range selector for?

Hello T.M.M. .... My father-in-law has the same JD350B (not sure of power steering though) which seems only the left track is under power. The right doesn't appear to drive the unit anymore. So, I'll be driving 3hrs to his home this weekend to inspect it, and wanted to know if it could possibly be just the linkage out of adjustment, or is it more likely more serious? (I know I know... Randomness dumb question, with very little backstory or data... Lol) When you go forward, it mainly wants to drift right, and will not go to the left at all anymore. Thoughts? Thanks much!

Is this the same for JD 440? All the components look the same just no power steering

My left track will not turn. Is this the video I should watch

Questions do these loaders have drive clutchs when i press the clutch and put it in gear the depress nothing turns thinking my issue is not the drive clutches but a main gear drive clutch but i see no videos or indicaton that that is even a thing any insight?

What kind of fluid goes in the steering clutch reservoir ? Is it hydraulic fluid? I had one side that wasn't stopping the track I filed it with hydraulic fluid now both sides no longer work.

At 10:19 in the video, there is a small lever by your fingers, what is its purpose?

Thank you now I can find out why my left steering handle is floppier than a limp elephant wang

Whats the easiest way to fix a steer brake thats stuck

Does this apply to a 350C as well?

I had a new clutch put in a jd 350 but the dozer still wont move. The clutch works it goes in gear and it acts like it wants to move a little but it won't. Any advice on what to do?

John Deere is not too clear on what is snug, snug to one person might be tight to another.

Ok I have a 450jd I think it’s a 1973 can I put a turbo on it and if so what size would work best I don’t want to hurt the motor

Can you send me some pictures of your steering arms yoke adjustments on front side and backside of your pump to 601-410-2153. My dozer has had someone adjust on those in the past trying to tighten the steering up instead instead of doing the way your adjusting your steering clutch and brake.