No video

JOHN DEERE X300 / FAILED TUFF TORQ TRANSMISSION / USED COMMERCIALLY / REPAIR OR REPLACE? / LOW HOUR

  Рет қаралды 15,414

THEMOWERMEDIC1

THEMOWERMEDIC1

Күн бұрын

MOTIVE X OIL FILTER WRENCH
amzn.to/40MjD1u
Copper spray a gasket
amzn.to/3Z9lonY
Help support my Channel by checking out my extensive parts store here on amazon
➡️ Check out this page from THEMOWERMEDIC1
www.amazon.com...
TOOLS I USE DAILY
MILWAUKEE 3/8 socket set
➡️ amzn.to/3N3ulda
1/4” socket set
➡️ amzn.to/3MTyQaf
Oil evacuator
➡️ amzn.to/3MQM33P
Lawn mower lift
➡️ amzn.to/38lKhsr
Fuel line clamps
➡️ amzn.to/3E0RI5u
#SMALLENGINE #BriggsAndStratton #Kohler #Kawasaki #Spartan #XMark #ToroHashtagClubCar #GolfCart #FuelLines #SmallEngineRepair #SmallEngineMechanic #SmallEngineRepairVideo #KZfaq #Repair #Video #DonnyBoy73 #EricTheCarGuy#Mechanic #MechanicVideo #HowTo

Пікірлер: 125
@danieldominguez7146
@danieldominguez7146 Жыл бұрын
I’m always willing to widen my knowledge with more experienced mechanics. I’d like to watch a tear down thanks Mower Medic
@bizboomer
@bizboomer Жыл бұрын
Yes, do the autopsy on the trans.
@davidfoulk3078
@davidfoulk3078 Жыл бұрын
I had an X-300 for two years and I always blew compressed air in and around the cooling fan cuz it doesn’t take very many grass clippings to clog up and prevent the very important cooling of transmission. Parts counter guy at the local JD Stealership told me that and it seemed to work cuz I never had a transmission failure issue.
@ericscottstevens
@ericscottstevens 22 күн бұрын
My L118 Limited just started doing this but it is 20 years old. Only 144 hours, but hilly uneven terrain. Yes mowing a BB field with that tractor........they justly got their moneys worth. Great field whoever is tending to it.
@wadepauly7380
@wadepauly7380 Жыл бұрын
Love to see a tear down!!!
@randalljones58
@randalljones58 Жыл бұрын
I would like to see you go through it and rebuild if possible.
@Nonamebf1
@Nonamebf1 Жыл бұрын
Yes, please do a tear down. My John deer tran popped and I opened up to find all kinds of broken parts.. cheaper to buy new trans than buy all components.😢
@seelye1221
@seelye1221 Жыл бұрын
love to see a tear down.
@bobmcdoggish9659
@bobmcdoggish9659 Жыл бұрын
Just this morning I helped my neighbor pick up his similar John Deere riding mower from the JD dealership, and the problem, which was very difficult (3 trips) for the "professionals" to diagnose, was the pulley on top of the transmission. Before all was said and done, my neighbor spent around $1,000 for the repair. That said, any new riding mower will set you back a minimum of $2,000, so repairing an old mower is a tough call to make when the motor is running strong.
@THEMOWERMEDIC1
@THEMOWERMEDIC1 Жыл бұрын
Yes pulley splines can strip
@waynestefinashen239
@waynestefinashen239 Жыл бұрын
Jeremy here at EP we have had a few of the residential John Deere riders with transmission failures and have sold them for our customers for $550 since they did not want to spend the money on a repair or transmission replacement. Funny that 725 was written on the dash wondering if those are the hours since a dealer told us these John Deere residential mowers fail at 750 to 785 maximum hours and have seen many that only last 370 hours at the minimum end. If the customer allows i would love to see what exactly failed, it would make a great video follow up.
@danieldominguez7146
@danieldominguez7146 Жыл бұрын
Hello Jeremy. Just wondering EP stands for El Paso, Tx
@mistersnapon
@mistersnapon Жыл бұрын
YES...lets see a teardown!!!
@joesfamilyfarm
@joesfamilyfarm Жыл бұрын
Yes! Let's see the teardown.
@robertshatto2995
@robertshatto2995 Жыл бұрын
Hell yea rip it apart,I have the x350,,4 years now,,might be something I'll be looking at in a few years
@maltedbarley1
@maltedbarley1 Жыл бұрын
Go for it!!!❤
@user-ft6ee5sk9c
@user-ft6ee5sk9c 9 ай бұрын
Your video and instructions saved me a lot of time and money--Thanks!
@481brighton
@481brighton Жыл бұрын
Yes!! Would definitely love to see how you rebuild the trans.
@rickchrist1949
@rickchrist1949 Жыл бұрын
I would love to see it
@almarble1
@almarble1 3 ай бұрын
Mine with a K46 did the same thing after 240hrs. Pretty uneven 1.25 acre terrain with a few short, steep slopes. I was surprised how many people wanted it when I posted on FB Marketplace and who knew about the issue. People try to replace the fluid or change to another transaxle all the time for fun. Not my cup of tea. Sold, and then bought the lowest price model with a K58 and we'll see how that does. So far, so good. Fast as a race car.
@SPCLPONY
@SPCLPONY 3 ай бұрын
I've mowed a lot of acreage on our farm for many years. Started out with a new Craftsman LT1000 with a 42" deck and 18.5 B&S. For a $999 machine new from Sears, it lasted for years. I actually still have it in the pole barn as a back up. As years went by, I 'reclaimed' a lot more yard to mow. I started mowing around my pond, one pass inside and outside the fence line of our horse pasture. I soon found I was mowing for 4 to 5 hours a week! Time for a bigger mowing deck. The days of the new $999 special at Sears were long gone by now. I bought a Husqvarna LGT2654 new from a local dealer. It was my first 'hydrostatic' (K46 Tuff Torq) rider. I loved the time it saved me. I have too many banks and hills to warrant a Zero-Turn style mower. Well, after a few years, those banks and hills took their toll on that K46. I followed several video how too's and dropped the complete rear end, changed the fluid out. I had to order and wait for a new cap. Finally got it put back together and it really didn't drive any better. Still slow up any kind of hill. Gets worse as it gets warmed up. I used it once for the first mowing this year, and parked it half way through the job. I got on a 46" MTD/Yardman similar to my LT1000. Good ol' trusty belt driven rear! I think I'm done with these hydrostatic mowers. I've built up a collection of similar MTD riders with 38" 42" and 46" decks. I've got 6 of them that all run, 2 spare B&S engines and a spare 42" deck. My kids are old enough to tandem mow right behind me now!
@antoniomarc7174
@antoniomarc7174 Жыл бұрын
Yes would like to see what happened.
@vernonviper
@vernonviper Жыл бұрын
i am curous to know if its low on hydrostatic fluid
@desireebaehler4243
@desireebaehler4243 Жыл бұрын
Heck yeah!!! It would be very informative to see the innards of the trans.
@crazyhorseracing6130
@crazyhorseracing6130 Жыл бұрын
Yes I'd love to see a rebuild!! Thanks
@MikeJones-jr5hb
@MikeJones-jr5hb Жыл бұрын
Yea, tear it down that would be interesting!
@jkeefer034
@jkeefer034 Жыл бұрын
Yes, please do a tear down & rebuild
@georgenovotny4421
@georgenovotny4421 Жыл бұрын
I have a tuff torque 400 in my Spartan, haven’t seen any videos on it yet. Hope it holds up.
@e.t.preppin7084
@e.t.preppin7084 4 ай бұрын
The x300 was sold to as a mower designed to cut 10 acres 13 years ago. I cut about half an acre of grass twice a week per season. Before you tear into that transmission I’d change the pulley above the transmission. They tend to get stripped out. Only cost you about 30 bucks to try.
@THEMOWERMEDIC1
@THEMOWERMEDIC1 4 ай бұрын
Don’t need to Try. I know the trans is bad
@jessramirez6696
@jessramirez6696 7 ай бұрын
Yes
@user-oi6so1vf2t
@user-oi6so1vf2t Жыл бұрын
Yes, I’d like to see that.
@michaelmorse4357
@michaelmorse4357 5 ай бұрын
Yes. Please do the tear down video.
@TNbubba1
@TNbubba1 Жыл бұрын
Take it odd mower, do a evaluation, quote oner repair and replace estimates, and we will enjoy seeing either option they choose.
@billlovett4256
@billlovett4256 Жыл бұрын
I'd love to see it. You'll probably get lots of views.
@davidmoran4471
@davidmoran4471 Жыл бұрын
I would like to see the tear down and repair. I do know that Tuff Torq are good folks if you need to talk to them. I did my K66 oil change and was not able to get the same volume of oil back in that I had drained. They said to give it over night as there is a port between the gear and motor sections of the transmission.
@herschelhill6937
@herschelhill6937 Жыл бұрын
Yes,Please rebuild transmission.
@AndrewDrapper
@AndrewDrapper Жыл бұрын
I’d love to see a rebuild. We just stripped one to replace the shaft, but have not seen a recondition, or what can go wrong.
@jessramirez6696
@jessramirez6696 5 ай бұрын
More medic what are you doing okay we haven't seen you lately on KZfaq channel hope you're doing okay and God's love and blessings upon you videos okay
@marshmower
@marshmower Жыл бұрын
Why i chose a 6 speed peerless gear drive as my first machine. Also steep hills. Not really safe to be honest. Gotta be careful. But a hydro would already have been acting up.
@herkyhawk2003
@herkyhawk2003 Жыл бұрын
Yes please do a tear down!
@robertm5967
@robertm5967 Жыл бұрын
Tear it down, replace filter and fluid. Might just work better. Just dis mine. Works like new. Btw there’s a new pleated filter design. Much better than screen.
@JM-yx1lm
@JM-yx1lm Жыл бұрын
That's not gonna fix it. It's only a temporary fix. The problem is the center section and the cylinder gets scored up and leaks fluid . New fluid is good fluid but will breakdown pretty quick and the problem will be back
@robertm5967
@robertm5967 Жыл бұрын
I agree that its only a short term fix. But my magnets were fairly clean and my screen filter was plugged with sludge. So my fingers are crossed that i may get a couple more years out of it. I used the tuff torque fluid as well.
@marshmower
@marshmower Жыл бұрын
​@@robertm5967 maybe it had those floaters growing in it. Like a slime or something nasty.
@user-gw5so6th7j
@user-gw5so6th7j 6 ай бұрын
Yes would love to see it
@stevehinton5300
@stevehinton5300 Жыл бұрын
Well, as soon as you said it slows down I thought... Same thing I had..?? Have a 2011 X300R ( rear baggr) Did same thing. Was no fluid in top tank. Went to JD dealer and wandered into mower shop. Nice guy told me there is a fix not many know about. The top plug next to the hold tank tube on some units crack and lets fluid drain out. He showed me the number, got the seal and bingo. Filled it up. Research on Tuff Torque website shows to use Synthetic 20w-50 motor oil...(?) Also there is no easy drain plug. Tuff Torque research showed the correct place to drill n tap for a pipe plug so as to drain the unit, change oil periodically. It fixed mine..!
@scotcarter1705
@scotcarter1705 Жыл бұрын
Steve Hinton where on the Tuff Torq website did you find the 20w-50 oil information?
@wldailey
@wldailey Жыл бұрын
Definitely would like to see a rebuild
@JungleBobRepair
@JungleBobRepair Жыл бұрын
I would like to see it,but they need to upgrade to a commercial mower!
@mimelio
@mimelio Жыл бұрын
I would love to see a tear down !!!
@williamgagnonroadboxservice
@williamgagnonroadboxservice Жыл бұрын
Yes yes yes. Tear it down man!!!
@georgestrickland9278
@georgestrickland9278 Жыл бұрын
its a k46 tough torque,just replace,they are only meant for level ground mowing,hills will kill them quickly
@aao8181
@aao8181 Жыл бұрын
Yea I’d like to see that video👍
@newsnowriversidesgtrock
@newsnowriversidesgtrock Жыл бұрын
Do the repair. We need to see the fix for this. I have an LA150 54" and it has exactly the same problem. It starts working fine and within 100 yards it stops dead. If I get off of the Machine and push the go pedal by hand the machine will still pull itself along with my pushing but will not pull with a rider. Fix it, good but, on the cheap parts and fluids.
@rayburnett3066
@rayburnett3066 10 ай бұрын
I would
@scott6052
@scott6052 Жыл бұрын
Love to see a teardown.
@michaelmcguire8028
@michaelmcguire8028 Жыл бұрын
How many hours are on it Jeramy?
@mchl8
@mchl8 Жыл бұрын
I had a tuff torque 55 open a few yrs back junk
@AnonymousGameWarden
@AnonymousGameWarden 2 ай бұрын
Did you end up making a video of the rebuild?
@chrisgarland2272
@chrisgarland2272 Жыл бұрын
Just pulled one out and apart and springs failed in pump. Customer decided to scrap it.
@hickorystx
@hickorystx Жыл бұрын
Yes, disassemblw/
@Spencer1609751
@Spencer1609751 Жыл бұрын
Yes Teardown!
@jjjuarez312
@jjjuarez312 Жыл бұрын
Do a transmission tear down.. I'd like to see if it's the transmission
@jimrerko3415
@jimrerko3415 Жыл бұрын
Yes.... Please. Get your helper. I use a Turf Tiger, that's what they need.
@gregfisher216
@gregfisher216 Жыл бұрын
yes!
@johnayers8990
@johnayers8990 Жыл бұрын
Yes , do it
@somerandomguy3868
@somerandomguy3868 Жыл бұрын
Granted that's a good bit too cut twice a week but I would think it capable enough with proper maintenance
@watermanone7567
@watermanone7567 Жыл бұрын
Yes, tear it down, many thanks.
@darrellhazelwood5647
@darrellhazelwood5647 8 ай бұрын
yes please
@henrytacam4119
@henrytacam4119 Жыл бұрын
Yes please
@wtbm123
@wtbm123 Жыл бұрын
Hilly here and seems many of them fail here . Tear it down
@darrellhazelwood5647
@darrellhazelwood5647 8 ай бұрын
on my x300 it will go foward but wont go in reverse until I reach down and pull up on the forward pedal it will back up
@mikeburke416
@mikeburke416 Ай бұрын
That's probably because your linkage came loose....Happen to mine!
@timothylanders3189
@timothylanders3189 Жыл бұрын
Crikey! Your pretty rough on the forward reverse action :o
@gillgetter3004
@gillgetter3004 Жыл бұрын
Heck yes open it up👍
@johnshoe5132
@johnshoe5132 Жыл бұрын
Yes go ahead and tear it down. But tell the guys mowing the field they need a commercial mower, it will last longer and mow better
@larryhankins3586
@larryhankins3586 Жыл бұрын
I have a X350, I would really like to see what happened.
@malfaro4
@malfaro4 Жыл бұрын
Do it !! Let’s see
@mohmedhosny6094
@mohmedhosny6094 Жыл бұрын
I hear transmission pump sound i think issue is low oil level
@kevinhaley6776
@kevinhaley6776 Жыл бұрын
One of my facilities thats fancy talk
@THEMOWERMEDIC1
@THEMOWERMEDIC1 Жыл бұрын
Just stating facts
@jjjuarez312
@jjjuarez312 Жыл бұрын
Change the v drive belt and the upper belt and the main crankshaft pully I am 100 sure that's your problem..
@THEMOWERMEDIC1
@THEMOWERMEDIC1 Жыл бұрын
I’m 100% sure it is not👍
@BADD400
@BADD400 Жыл бұрын
Yes teardown
@carlosg1165
@carlosg1165 Жыл бұрын
Do a rebuild ❤❤❤❤❤❤❤❤
@barryray786
@barryray786 Жыл бұрын
It's the forks in the transmission are wore out. I fixed one about 25 years ago. I can draw a picture and show you what it looks like. It was only a $20.00 fix. Don't change the transmission.
@chrispeters4405
@chrispeters4405 Жыл бұрын
need to change the fluid.
@bryanhines34
@bryanhines34 Жыл бұрын
Want to see the teardown
@brentdutcher2875
@brentdutcher2875 Жыл бұрын
By chance does the x300 have the same trans as the x354 I can't seem to find a video on how to change the trans fluid.
@THEMOWERMEDIC1
@THEMOWERMEDIC1 Жыл бұрын
I have zero idea about that sir. I am sorry the best way to find out is to call your nearest dump. I mean John Deere dealer.
@brentdutcher2875
@brentdutcher2875 Жыл бұрын
@@THEMOWERMEDIC1 thanks
@vinces8974
@vinces8974 Жыл бұрын
Please take it apart for us
@cdnsc
@cdnsc Жыл бұрын
Help Yeah 👍👍
@williambrice2265
@williambrice2265 Жыл бұрын
Yes tear it down
@davidpawson7393
@davidpawson7393 Жыл бұрын
One of my Cub Cadets has the opposite problem where once you push the go pedal it doesn't release. Pulley stack?
@THEMOWERMEDIC1
@THEMOWERMEDIC1 Жыл бұрын
I don’t think your cub cadet is hydraulic drive is it?
@michaelfarris2556
@michaelfarris2556 Жыл бұрын
Go for a rebuild
@beachbums2008
@beachbums2008 Жыл бұрын
Rebuild it! Let it live again with the heart transplant.
@philliphall5198
@philliphall5198 Жыл бұрын
New one
@johnobiro5202
@johnobiro5202 Жыл бұрын
Yeah. Do a tear down Jeremy.🔧👍🇬🇧
@astairs36
@astairs36 Жыл бұрын
You know we want to see you disect it... Lol
@burgerbirger2221
@burgerbirger2221 Жыл бұрын
Tear it down👍
@jimrerko3415
@jimrerko3415 Жыл бұрын
Where's the kid ? 😔 He's the star.
@hydrospeedex
@hydrospeedex Жыл бұрын
Rip it open doctor
@motoman5023
@motoman5023 Жыл бұрын
Tear it down!!
@jonathanfierberg3807
@jonathanfierberg3807 Жыл бұрын
No don’t tear it down
@brandonstclair6530
@brandonstclair6530 Жыл бұрын
People pay so much money for these x300 series tractors only for them to end up like this one, busted hood and broken transmissions. In this case you don’t get what you pay for.
@jameslainio3752
@jameslainio3752 Жыл бұрын
Autopsy might be needed.
@berkeleycountysmallenginer3842
@berkeleycountysmallenginer3842 Жыл бұрын
Tell the customer that mower isn't made for cutting grass at ball diamonds. Tell him what mower to buy for ball diamonds.
@09hoseclamp
@09hoseclamp Жыл бұрын
How many hours on it? And is this typical before tranny starts letting go?
@tombaker3289
@tombaker3289 Жыл бұрын
dirty oil filter.
@YamacrawJess
@YamacrawJess Жыл бұрын
Yes, we need to see the guts.
@andybecker2693
@andybecker2693 Жыл бұрын
It’s just worn slap a$$ out. They got their money’s worth. Looks like they need a 930 for that.
Tough Torq Riding Mower Transmission Leaking Hydraulic Fluid And Slipping
11:25
Raley's Small Engines
Рет қаралды 128 М.
Prank vs Prank #shorts
00:28
Mr DegrEE
Рет қаралды 10 МЛН
Ik Heb Aardbeien Gemaakt Van Kip🍓🐔😋
00:41
Cool Tool SHORTS Netherlands
Рет қаралды 9 МЛН
PEDRO PEDRO INSIDEOUT
00:10
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 18 МЛН
Running With Bigger And Bigger Feastables
00:17
MrBeast
Рет қаралды 165 МЛН
John Deere X300 & X500 Sereis Tractors: Slow In Forward Or Reverse
1:56
Quick Tip: Not All Transaxles are Created Equal
7:47
Boonslick Equipment
Рет қаралды 50 М.
Repair the hydrostatic transmission a Tuff Torq K46 (Lawnmower Stiga Park)
15:24
Berg 3:10 ( Tor-Arne Jonasson )
Рет қаралды 62 М.
Tuff Torq K46 / T40J ONE YEAR LATER  (Oil Fill Mod Series Video 4)
12:25
Deere Z525E Hydrostat Failure & Repair (Tuff Torq TZT7DL)
45:31
Steve's Farm Shop
Рет қаралды 10 М.
The Truth About Mower Spindles
12:15
Dennis Coffey
Рет қаралды 973 М.
TUFF TORQ Hydrostatic Fluid Change K46 T40 John Deere
12:26
Sweat Equity
Рет қаралды 80 М.
Prank vs Prank #shorts
00:28
Mr DegrEE
Рет қаралды 10 МЛН