Finally found accurate mower transaxle information. Thank you.

I like watching his common sense repairs.

“Dead batteries and carburetors “. Sounds like a country song! 😂

I appreciate your straight forward no nonsense advice. Keep up the good work sir.

I like how he points out the owners mishaps without really insulting them😅😅

No fuss no muss , Fixed!

Really enjoy your videos, keep them coming.

Good technique on the wheelie.

These are very well-made transmissions I have a Tuff-Torq K55 in my 1995 Snapper Lawn Tractor 30 years of service ☑️

Had to subscribe as you taught me something…never knew that fluid plug was there!😊

Thank you t bone for helping me solve problems. I’m now working on mowers every day as a side hustle from educating myself off of your videos. I look at mowers completely different now.

Great video, exactly what I needed.

Like the zip tie dip stick.

Love your videos sir . Already picked up a few pointers. Im from Saskatoon Saskatchewan ,Canada. I'm retired & do alot of small engine & equipment in my garage for friends & neighbors. Always look for to more videos my friend . Keep them coming . 😊

Nice shop, I'm out here on the ground.

Well done T-Bone! Never sieze is definitely your friend. Like you said it somehow finds its way to your hands, clothes, tool, etc! 😢✌🇺🇸

Very educational video

Learning more and more. Thx.

I can't believe you didn't have to purge the air out of it. Must have done it off screen. Good stuff brother.

Another successful fix T-Bone, and well explained 👏 👌 👍

The red neck dip stick was awesome.

Keep them coming bro

Awesome!

T-Bone, another great session on giving us some education on the common fixes

Ok , dag nab it ya got me .I'm subscribed. Love the simple and elegant approach to the repair process 😎🙏👍🏻

Thank you sir!

Well at least you got a sesl of approval for getting the leaky oil seal fixed and running again

dang, Evel Knievel..... looks like you gave yourself whiplash at the end!! Awesome video as always.. B

T-Bone you always make it look easy brother. 👍 Hey Mrs T-Bone 👋

You make it look easy.

Thanks for sharing 👍

This ain’t NASCAR! absolutely brilliant quote 🤣🤣🤣👍🏻. That engine was hunting like the sheriff in the Rambo movie T-Bone! carb clean brother,,, great video, too easy,,, love to Mrs T from your biggest UK fanclub

Thank you sooo much for this video!!!

Good stuff! Very helpful! I really enjoyed the wheelie. Keep up the good work.

Great idea to highlight the part number. 👍👍

Thank you for the advice

Love watching your videos

Just started watching your videos you do a great job explaining things

He does a great job. Thanks

Well I learned something today. Well taught lesson. Subscribed!

Good mechanic !

Just had this issue come up. You video has helped, cheers!

I learn so much from you. Thank you sooo very much for your videos

Thanks for the videos !!

Love it bother wheels up!

Great video. I've had the same issue. I will add this to my winter maintenance!

Thanks for the video brotha

Love your videos, they are always quick and to the point. I am in NY and I Love your accent !!! Thank you for a great youtube channel and keep the videos coming. Regards

thank you buddy!!!! I'll go check mine

best ive seen thanks

Just found this video and your channel. I found oil splattered on the inside of the right rear wheel of my Husqvarna YTH21K46. After watching your video, I’m pretty sure it’s the axle seal. Thanks. 👍

This is great - informative and entertaining as well. Awesome!

great video, I'll have to check for leaks

Loved this video. Thanks for the demonstration, I learned a lot.

Gear/Transmission oil* :)

You just saved my a** and several hundred dollars! Subscribed!!! Thank you for a great channel. I would like to see how to adjust the valves and replace valve cover gaskets. Also, I have a 2015 Cub Cadet Riding Mower and the seat is CRAP but I do not want to pay $300.00 for a new one any ideas!

Thanks

I like your demeanor

Very good information. Easy to follow with clear instructions 😊 Thankyou Sir

Grate job

How about on a troy built

Perfect practice makes for fun😂

A great vedio

👍👍👍Thank you

Mine has the bearing grease in it. Thank you for the video.

wow good video

Wheelie good video.

Hey hey there ya have it, folks. "It's just that simple "

Not sure if it will affect the seals life but you did install them backwards and the old ones were in correctly… other than that good work!!

I have a John Deere D110 engage cable broke. I replaced it but now when I engage my blades are barley turning. I did love this video. Tony

Technically what you refer to as the fill plug...is the relief plug. The actual fill plug is just forward a few inches, but on that model CC its easier to get to without removing the fan blade. On my JD l130, you have to remove the tranaxle to check or change the fluid. Its not overly difficult, but Tuff Torq could have designed them better.

From my understanding Cub Cadet made a transmission for their 2160 called the Autogear Transmission. Instead of running off a hydrostatic drive it runs off multiple clutches which are attached to a 6-speed transmission. I'm curious on how it works and how to diagnose problems with that particular transmission.

Hello Sir, I’m a recent subscriber and I really enjoy your the humor and your common sense way of explaining how to fix any engine problems. I have a question about the rotary fuel filters. I like to order some , but I can’t seem to find them. Could you tell me how I can order some? Thanks for all the great videos.

I live on 5 acres and maintain it myself (have been for 45 years). I maintain my own equipment (chainsaws, line trimmers, hedge trimmers, riding mowers/garden tractors, pressure washer, log splliter, ...). I take care of my stuff so it last a long time (I purchased my JD 317 when they were new and have the Kohler Series I motor) as my John Deere is still on the original engine (no smoke) and Hydro. Where do I get parts for my stuff (JD 317, Echo, Stihl, Husqvarna, Poulan, ....). I saw you replace the axle seal and all I could think of is where the heck would I get that for my 1996 Poulan ( 18.5HP Briggs and 46 inch deck)? I only know amazon and ebay. Where do DIY guys like me get hard to find parts for our well cared for quality stuff (like original carbs or Original carb kits)? Thanks!

great

Great instructional video mate. I have a John Deere x300. According to the owners manual, the gearbox is sealed for life! It has one of those caps but it is mounted vertically on the rear of the gearbox. Is it actually possible to change the gearbox oil in a tuff torq gearbox in an x300? If so, can you give me some guidance on how to do it? Many thanks.

Three favorite Grass Rats you Taryl Dactyl And Musie 1

this just confirms what my thoughts were on a slow/surgin trans on a troybilt horse xp I have. You aren't the only one to have a low opinion of those kholer courage engines but dangit if both of mine haven't been used, abused and then beat on some more and they just keep cuttin. I mow about 8-10 acres weekly with just a 46"'r. Good vid and I sub'd.

Replaced ToughTorq hydrostatic transmission on my John Deere D170 only to discover original one was slipping due to low fluid. JD doesn't give you a way to check fluid level with rear end still installed. So, now I've got a spare.😐

spring on the seal goes on the inside the lip without spring goes on the outside for dust..

got same thing, hope

Hi. I have the Cub Cadet model as the one in this video. I bought the axle seal on cub cadet website. I am not sure if it is right. would you please let me know part number for the seal use are you using. it look so easy when you drive the seal in. I use the washer and the pvc to drive the axle in but i having hard time... I am still working on it.

Another great video T-Bone. To easy!

Any thoughts as to whether the seal was put in backwards at the factory or by someone else?

Would this same repair coincide on a 7 speed manual transmission?

Ive just speant a day trying to get the wheel hub off the axle. Its so rusted on its impossible. I then stripped the transmission so I just have the axle and hub to work with. Tried everything to get that hub off with no success. Even heated it with a blow lamp. Annoyingly its moved on the shaft and seized in a different position. Have ordered a new axle and will drill out the old one to rescue the hub.

I've have a slow leak from somewhere near the middle of the transmission. Can't see enough to figure out where it's coming from. Are there any good candidates ? Works fine if I keep it filled.

Well done Tbone but i like my steak medium rare!

Awesome can you show the how to on the ceiling winch.

Here's and idea.... use the pick tool you used to get the dust cover off on axel seal.... kinda what they're actually for

Does a troy bilt pony have a full plug I've looked all over it and can't find one

In the beginning was a clogged carb the reason for that surging? I have a Kohler PRO v twin engine that surges but the only things I can think of is the carb, or fuel pump is sending fuel like it's supposed to. But full throttle it backfires?

I put new belts on my Troy-Bilt pony upper and lower drive belts and now when I put the park brake on the mower still pulls how do I adjust this

I have a husk of honor YTA22V46I replaced Replaced one seal? Is it a way I can add some fluid into my transmission?

👍

I have the same mower that is starting to do the same thing. Has 69 hours on it no leaks anywhere no loose belts. Any advice, it's only 5 years old .

This job is a lot easier than on a John Deere. On the LA series have to pull the transaxle out.

How do you adjust zero turn mower how do you adjust each side to make it turn and not dig and spin

My huskee going downhill started a loud clicking/popping going downhill then felt like neutral so i just hung on for the ride,it drives and cuts on flat ground but i cant go down a hill,any ideas

Anti seize is good stuff folks and a bottle of it lasts a long time. You'll save yourself a lot of headache.