How to Remove Rear Axle Shafts and Replace Outer Seals and Bearings Ford F150 and More

Рет қаралды 111,192

Күн бұрын

Inspection of noisy rear brakes revealed oil contamination from a leaking rear outer axle seal. In this video we will remove the rotors and calipers, open and drain the differential, remove the axle shafts, and remove and replace the outer seals and bearings on a 2000 F150. The process will be similar on many Ford vehicles from multiple model years.

Пікірлер: 63

@GeneralSulla 7 ай бұрын

Finally someone who does both sides. No difference but other KZfaqrs were just being lazy about showing both sides. Thanks.

@ant98tan 10 ай бұрын

Thank you for the video. Very detailed and simply instructions along with the great camera work.

@johnbadgerow6135 5 ай бұрын

Thank you for making a complete video it's been so many years since I've worked on a rear end of a truck I forgot half of the stuff that you just reminded me of.

@AnTi90d 11 ай бұрын

Thanks.. I've never owned a truck before and my back rear wheel is wobbling.

@johnhollowell2018 2 жыл бұрын

Thank You for taking time to make this video, It was Very helpful and Very much appreciated !!!!!!!!!!!!

@cesmik 2 жыл бұрын

Thanks alot for your video it helped me alot when i replaced my rear axle

@eustaciotrevino5604 2 жыл бұрын

Very helpful video, thanks.

@DL-qq4nu 3 жыл бұрын

excellent video. will refer back to this in a couple of years...

@jaceisaac7379 3 жыл бұрын

dont know if anyone gives a shit but if you're bored like me during the covid times you can watch all the latest series on InstaFlixxer. I've been binge watching with my girlfriend for the last months xD

@graysonibrahim9078 3 жыл бұрын

@Jace Isaac yup, been using instaflixxer for months myself =)

@filibertovargas8354 Жыл бұрын

Thankyou for your video sr Really helful.

@cooldude2245 3 ай бұрын

Excellent

@dennismarella4858 2 жыл бұрын

Thanks pal big help

@521farmer 2 жыл бұрын

Wow ya Make it look easy thks for sharin your Project for us Keep it up Ya Got this mine is 1991 f150 cant get drums off goin to use heat guess see what happins makin a Pellet maker out of the Diff so need to get these Axles Out So Thks again

@toledosetegalo280 2 жыл бұрын

Thak you

@makelifefun5101 Жыл бұрын

I know this video is two yrs old but great video

@linweichen7251 Жыл бұрын

2006 Ford it wouldnt newdy.

@j.huxcho8059 2 жыл бұрын

So i have to do this to put brand new wheels studs

@thejazzassignment 11 ай бұрын

Thank you for the video, very helpful! One thing that I noticed that might be different is my F150 requires 75w-140, possibly because it is an FX4?

@TheOriginalMechanic 11 ай бұрын

Could be. Glad you went to the owners manual for specs on fluids!

@crucifiedfaith 2 ай бұрын

You are very good at explaining in detail thanks

@Tj-li9uk Ай бұрын

What is the bicycle looking sprocket for?

@CoeShow619 2 жыл бұрын

Have you ever noticed a slight .030 play in and out on ford f 150 axles. I never noticed it before in my truck, but now I have a clunk clunk noise backing up, and have traced it to the rear end axles. With E brake off, I can shake the truck from the tire and hear knock knock, clunk clunk. Some say this is normal. After performing your great video and axle install have you noticed slight in and out play? Is it because of the c clips? In my world of airplanes, we don’t like play in things that move or hold weight. Truck is a 2017 F 150 with limited slip 9.75” rear end. 25,000 miles. Thanks for the help.

@TheOriginalMechanic 2 жыл бұрын

I have not noticed play like that. With those kind of miles it seems unlikely a bearing would be going already or the clips would be worn. I wouldn't like it either and it would likely drive me to distraction. Nothing really leaps to mind at this point...

@cashcrosby3685 11 ай бұрын

@@TheOriginalMechanickill

@ignaciodaviddelacerda7971 Жыл бұрын

Cool.

@bindig1 4 ай бұрын

Great video but use the grey Permatex on that pumpkin cover

@artman102 3 жыл бұрын

My truck has had a whining sound since I bought it used with 230,000 miles on it. Now 20,000 miles later the rear wheels are loose - in and out- movement by over 1/2 inch. Both sides. So, it looks like I will be dismantling to see what is worn out.

@TheOriginalMechanic 3 жыл бұрын

Good luck with it and thanks for watching!

@jean-pierrehall2914 3 жыл бұрын

Hey John. Good day to you. I’m experiencing the same issue with in -and-out play and grinding. What was your final diagnosis? Thx. JP

@alexkifa7841 2 жыл бұрын

Most like the tip of the axle is broken ( the part where the C clip goes around )will cause the wheel to rub against the rotor cover

@poolman8201 2 жыл бұрын

Question, 99 Ford f150 right side axle has alot of in and out play, clip fell out before and looks like it's close to falling out again, any ideas why it's doing this, bearing and seal is new?

@TheOriginalMechanic 2 жыл бұрын

You must have some wear on the axle or even the differential.

@poolman8201 2 жыл бұрын

Yeah, I got something going on. Axle looks good, i pulled the c clip out put it in a vice and bent it a little bit , shouldn't fall out now. Thanks for the response. 👍

@timodum2107 2 жыл бұрын

Will this procedure work for a 2014 F150 FX4?

@TheOriginalMechanic 2 жыл бұрын

Likely to similar but not identical.

@GriffinsFanChris 3 жыл бұрын

Are the spider gears something that could easily fall out once the pin is removed?

@TheOriginalMechanic 3 жыл бұрын

So I've been told. It never happened to me but it is definitely a possibility.

@GriffinsFanChris 3 жыл бұрын

@@TheOriginalMechanic I'm in the process of doing this right now. The spider gears seem to be in there pretty good. Im going to put the pin back in while I do the seals and bearings though.

@jean-pierrehall2914 3 жыл бұрын

@@GriffinsFanChris good day GFC. Did putting the pin back while do seals and bearings work? Thx. JP

@GriffinsFanChris 3 жыл бұрын

@@jean-pierrehall2914 Yes, it worked good. Got the job done!

@jeffreyallen3777 2 жыл бұрын

Yes, if you rotate too much and the spiders move too far toward the open side of the diff there will be nothing to hold them in place. It is not the end of the world but there are probably shims that will come out with it and it's a little bit of a trick to get them back in at the correct rotation point. I accidently kicked a wheel when I had mine apart and it rotated enough for one to fall out.It's best to be very carefull and avoid this happening especially if it's on a lift as the long drop may damage the spider.

@jamesa9lpiopatton419 2 жыл бұрын

Is it same for other side all videos show from same side thanks

@TheOriginalMechanic 2 жыл бұрын

Yes it is the same

@jamesa9lpiopatton419 2 жыл бұрын

@@TheOriginalMechanic thanks for reply always search for video that makes it looks easiest and most informed that why I went with u

@TheOriginalMechanic 2 жыл бұрын

@@jamesa9lpiopatton419 You're welcome. I really appreciate the feedback!

@nickmendoza1140 2 жыл бұрын

Did you pack the bearing with grease?

@TheOriginalMechanic 2 жыл бұрын

It's a sealed bearing.

@mattikyle Жыл бұрын

You don't actually have to take the tire and wheel off You just have to do the differential stuff in there get the little c clip out of there It pulled the whole axle off outside the axle out with the wheel hooked up to it still unless you just want to take the wheel off

@TheOriginalMechanic Жыл бұрын

Yeah you're right. I had the wheel off first to look at brakes and then to replace a rear bearing.

@jesusgutierrez1446 Жыл бұрын

I don’t believe the rotor would allow that to happen. 🤔

@Afrattzz1 Жыл бұрын

The caliper wouldn’t allow that and if the drums need to be backed off. Besides, it’s a lot easier and less cumbersome to just take the wheel off. I’ve never left the wheels on.

@garyr7027 Ай бұрын

That will work if it's drum breaks but then why do it that way with all that weight on one end of the axel?

@chow62 2 жыл бұрын

Tripac that bearing full of grease before you apply bearing

@jerrycarter1928 Жыл бұрын

not sure you had the right gear oil, for my 02 F150 the right fluid is 75-140 full synthetic. Also, make sure you have the antislip additive if you have anti slip diff. If you are not sure, add it as it does no harm if you don't and if you have an antislip diff, you are covered. I didn't see if you used RTV or a gasket at the end, nor did I see you clean the diff from the previous sealing method. I think it is worth mentioning what you did so new folks don't get this step wrong and end up with a leak. Thanks for taking the time to make the video

@TheOriginalMechanic Жыл бұрын

I used my owners manual for the oil choice. If there was an update I guess I missed it. Thanks for sharing the useful details.

@jerrycarter1928 Жыл бұрын

@@TheOriginalMechanic K. There are 2 tags on the diff, one of them has the correct oil to use too.

@dutchmccutch615 2 жыл бұрын

Does no one ever replace the bearings on the dang passenger side? Its ALWAYS the drivers side in every single one of these videos.

@TheOriginalMechanic 2 жыл бұрын

Of course I changed them both. I did the passenger side first and decided the video clips were better on the driver's side. Luckily for those viewers who want the passenger side, the procedure is the same.

@dutchmccutch615 2 жыл бұрын

Yeah im sorry i didnt know it was the same process of taken em off on both sides. I dont mean to sound dumb ive never taken the axles out before i guess it was just a coincidence i watched like 5 videos and everyone was only taking the driver side axle off i was like well how the heck do ya take the other dang axle off!? Haha my bad man i see now its the same way on both sides. I am replacing my rear wheel bearings tommorow on my truck i have been watching alot of videos to make sure i know what im doin when i go to do it.. Ive replaced the rear wheel bearings on my fourwheeler before but that was a tad bit different. I never have had too on my truck until now. Thanks for the video tho it was very well explained. If you said you do the same on the other side im sorry for not catching that. God bless ya sir!