Ammo Casings and Resin.. A Screw Driver Handle

  Рет қаралды 2,319,614

The Pohl Barn Productions

The Pohl Barn Productions

5 жыл бұрын

Lets make a screw driver handle out of resin and Ammo casings ! 9mm's, 380's, 22 mag's, 40's,45's,223's and one 357 mag !
It's not real practical but it's SUPER COOL.
Sponsored by Total Boat and Jamestown Distributors
Find them here. use PROMO CODE POHLBARN for 20% off
totalboat.com or jamestowndistributors.com
resin I use
www.alumilite.com
www.resin4art.com
totalboat.com or jamestowndistributors.com
Yorkshire Grit and Hampshire Sheen
www.thewalnutlog.com/
Find Us Facebook Page
/ pohl-barn-productions-...
Find us on Etsy
www.etsy.com/shop/PohlBarnPro...
If you find the need to send me something send it to...
Pohl Barn Productions
PO Box 121
Olivet MI. 49076
Email me at
Dougmoore670@sbcglobal.net
The new lathe
Nova Galaxi DVR 1644
Where I get my lumber, materials and tools.
The Workbench and or LL Johnson's Lumber
www.theworkbench.com/
Music
A license to use the following media was purchased under Pond5's Content License Agreement, a
copy of which is available for review at www.pond5.com/legal/license. The Pond5 license
authorizes the licensee to use the media in the licensee's own commercial or non-commercial
production and to copy, broadcast, distribute, display, perform and monetize the production or
work in any medium - including posting and monetization on KZfaq - on the terms and conditions
outlined therein.
MEDIA TITLE MEDIA TYPE CONTRIBUTOR DATE PURCHASED LICENSE
Hybrid Trailer (powerful epic and action cinematic background) 76574309 Music AShamaluev 2018-12-04 Individual
DISCLAIMER
Please note that my channel is for entertainment purposes only. You should NOT rely solely upon the information and techniques discussed and displayed in my channel.
I am not a professional woodworker or woodturner and working with machinery can be dangerous.
It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
#resinart,#woodturning,#totalboat,#starbond,#woodworking,#bowlturning,#bowlmaking,#Lathe,
#maker,#michiganwoodturner,#mittenmade,#NovaGalaxiDVR,#DIYwoodturning, #epoxyresin,
#woodandresin,#woodandepoxy,#woodworker,#HarborFreightPressurePot,
#resincasting,#DIY,#diyabrasivepaste,#shinejuice,#CastersChoiceMicaPowder, #PearlEx,
#abrasivepaste, #mylandssandingsealer,#CactusJuice, #alcoholink,#pressurepot,#foryou,#howto,#pureMichigan,#pewpew,#casings,#ammocasings,
#screwdriverhandle,

Пікірлер: 2 400
@victorgalvan406
@victorgalvan406 5 жыл бұрын
Would of been a Badass shifter.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
It still may be, as soon as I make another to put in the Model A
@zandernicholas8391
@zandernicholas8391 5 жыл бұрын
Was going to say the same, would make for a nice shift knob
@offutttransport9918
@offutttransport9918 5 жыл бұрын
Definitely a bada$$ shifter idea
@WileyCustoms
@WileyCustoms 5 жыл бұрын
yoooo thats what im saying i was lookig throuh the comments to see if someone said that already
@FaigMasimov
@FaigMasimov 5 жыл бұрын
Yes, but with full bullets
@maddmaxx6730
@maddmaxx6730 5 жыл бұрын
Those would make awesome shifter knobs especially for a rat rod.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Yes they would !
@hmax1591
@hmax1591 5 жыл бұрын
great idea. Someone with the skills and tools can make some money selling those.
@OldSkoolF
@OldSkoolF 5 жыл бұрын
House of Speed has them.. Used to be a guy named Rip that was doing Lokar Knobs and I can't find him any more... Only been 10 yrs....
@ShlisaShell
@ShlisaShell Ай бұрын
Wow, nicely done. 👍 I know what you mean being surprised by how hard it was to cut the through the casings. I told our ten year old to put what he wants in his ferro rod handle epoxy casting and rather than add pine cones and fatwood he added a few pennies. I didn't think the pennies would be too hard to cut through lol. You had me curious on this one. I was going to try it.
@OddTinkering
@OddTinkering 5 жыл бұрын
Nice work. You clearly know what you are doing.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! Nope I was winging it, first time I've turned brass
@jasonhowell9520
@jasonhowell9520 5 жыл бұрын
I know most people don’t want to be bored but I’m a believer that seeing the mistakes that others make saves me from making the same or at least how to deal with thank you for sharing your knowledge
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! I think mistakes should also be in a project, it helps other realize we all make mistakes and to not give up, work through them and finish what you started.
@timothyoclair5617
@timothyoclair5617 5 жыл бұрын
I'm with these guys, I want to see your process of creating the pieces that you do. That includes all your goofs and "mistakes". Keep em coming!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You...
@dallaswoiken7533
@dallaswoiken7533 5 жыл бұрын
Awesome
@keithhoward4059
@keithhoward4059 5 жыл бұрын
Not many people learn from others mistakes sometimes I don't learn from my own
@nathanweese3812
@nathanweese3812 5 жыл бұрын
Love it, great idea to color the insides, the contrast is awesome. You've given me some ideas for future projects, thank you.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@nahuelluna7071
@nahuelluna7071 5 жыл бұрын
i want to make a shift knob for my car with some shell casings that my grandfather gifted to me when i was younger since he helped me buy that car months before he passed away
@womensarmycorpsveteran2904
@womensarmycorpsveteran2904 4 жыл бұрын
Oh man, I would love to gift my hubby with a set of those. He would be the coolest dude at work & I would get some serious kudos.
@JensWoodworkingThings
@JensWoodworkingThings 5 жыл бұрын
I'm amazed it cut those casings!
@dasbull0101
@dasbull0101 5 жыл бұрын
That is one of the coolest things I’ve seen! Great work! Thanks for sharing.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You !
@bluecurlygirl
@bluecurlygirl 4 жыл бұрын
If only there was a "Wow" button. That just blew my mind. Turned out awesome
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank you Thank you
@bluecurlygirl
@bluecurlygirl 4 жыл бұрын
@@PohlBarnProductions Watched most of it in absolute dread to be honest! I was full sure you were gonna wreck your tools/lathe or both. Only realised today that yt had unsubbed me from your channel. How very dare they! I didn't miss any videos though cos I have been on the lookout for your uploads. Just wasn't being notified. Sorted again. Would hate to miss any.
@iamrichrocker
@iamrichrocker 5 жыл бұрын
i have not shot a gun in years..have never operated a lathe..but found this video..and result..very satisfying to watch...
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You !
@ronaldrichard8869
@ronaldrichard8869 5 жыл бұрын
You do great work, you are one creative individual, I'm excited about these channels with all these lil amazing gifts that I'll be destroying till I'm good enough!! Hey God bless you bro!!
@bluecurlygirl
@bluecurlygirl 4 жыл бұрын
No mistakes - just happy accidents! (Hopefully happy ones anyway)
@waskito3443
@waskito3443 5 жыл бұрын
that screw driver just increased in value by 2000%
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Offer me that and I'll be making another ! LOL
@ellenyager9577
@ellenyager9577 5 жыл бұрын
My husband, a former SeaBee, and trained Diesel Mechanic, would LOVE a set of these in Phillips and Flat! Great job! -Ellen
@dexterfandango
@dexterfandango 4 жыл бұрын
That. Is. Absolutely. AWESOME!
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank You Tim
@gerryduffy6700
@gerryduffy6700 5 жыл бұрын
Looks fantastic. It might be better as a cane handle 👍. I know I’d buy it😎
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You, well that was a snap on screwdriver and dad wasn't happy about the handle rotting off, it worked out great for it, as it could for many other things, shifter knobs, cane handles ect.
@arthurmorgan3972
@arthurmorgan3972 5 жыл бұрын
@@PohlBarnProductions ...something to put in her butt, etc.
@dekebell3307
@dekebell3307 5 жыл бұрын
Man, that was very, very cool!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you !
@boxhawk5070
@boxhawk5070 5 жыл бұрын
At least I am watching this during the day, at work, instead of 1am at home....
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you
@yo66
@yo66 5 жыл бұрын
One of the all time coolest videos I've watched on KZfaq!!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You....
@shooter575
@shooter575 5 жыл бұрын
Going to make one for a rifle cleaning rod!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
That was suggested to me by the guys at the gun club, I'm sure it will look Awesome !
@lilfrozenfoot9469
@lilfrozenfoot9469 5 жыл бұрын
you should make a doorknob out of this!
@jrprieto1
@jrprieto1 5 жыл бұрын
That is bad ass, old school ingenuity, great job old man...
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you JP.. LOL I'm NOT OLD ! LOL
@tinaharris4082
@tinaharris4082 2 жыл бұрын
I've heard of policing one's brass but that's a whole new level of it.
@diydarkmatter
@diydarkmatter 5 жыл бұрын
looks great brother thats one hell of a long screw driver . good job buddy .
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! It was my Dad's for what ever reason the handle desintegrated in his tool box. Snap on tools are expensive, but try to get it replaced if you didn't buy it from that guy. Not Happening.
@diydarkmatter
@diydarkmatter 5 жыл бұрын
@@PohlBarnProductions well it is a lot better then it was for sure and a one of a kind piece . i think you did your dad proud with it and it will last forever now. well as long as you dont drive over it with a big truck lol . again great job my friend .
@steffanymarquez7819
@steffanymarquez7819 5 жыл бұрын
You deserve 1 million subscribers
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You Steffany !
@landonjackson3064
@landonjackson3064 5 жыл бұрын
Agreed 🔥
@kentrus2800
@kentrus2800 5 жыл бұрын
Мужик красавчик. Получилось супер. Спасибо за видео . Удачи Вам!!!!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@dzrotary
@dzrotary 5 жыл бұрын
Hey I just happened to be sick and couldn't sleep and I saw your video and is amazing. Love tools and u should make the for sale. Thanks for getting my spirit back up!!!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You... and you are Welcome, hope you are feeling better soon !
@TZMGVISION
@TZMGVISION 5 жыл бұрын
That be a cool shift nob for my truck
@tseawell90
@tseawell90 5 жыл бұрын
TZMG VISION Yea right next to your swastika flag
@joski9030
@joski9030 5 жыл бұрын
Within 30 seconds of watching I subbed 👍🏻
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You and Welcome Aboard
@mr.kymholley4500
@mr.kymholley4500 4 жыл бұрын
I couldn’t stop watching. Great work Sir! Great Work!
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank You Kym
@jeffmackdesigns
@jeffmackdesigns 5 жыл бұрын
That Red Color made them look way cooler than it already did
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you Jeff
@jeffmackdesigns
@jeffmackdesigns 5 жыл бұрын
@@PohlBarnProductions No problem! thanks for these great videos!
@rudyrobles4463
@rudyrobles4463 5 жыл бұрын
Make the resin in the shells red,white,and blue
@landonjackson3064
@landonjackson3064 5 жыл бұрын
Merica 🇺🇸
@dewbloemen6722
@dewbloemen6722 5 жыл бұрын
The Netherlands 🇳🇱
@intoxicviii
@intoxicviii 5 жыл бұрын
@@dewbloemen6722 L
@MasterGamer-gq3de
@MasterGamer-gq3de 5 жыл бұрын
Or just blue
@snekychanuwu9545
@snekychanuwu9545 4 жыл бұрын
Russia 🇷🇺
@esoqueloarreglepapa
@esoqueloarreglepapa 5 жыл бұрын
Buenísimo compañero,me gusta mucho tu canal,saludos 😜
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You...
@yohanagill139
@yohanagill139 5 жыл бұрын
Dvfcvcb.
@EggyBoi
@EggyBoi 5 жыл бұрын
Hola, me no speako taco
@MrLakers1991
@MrLakers1991 5 жыл бұрын
Eggy Boi this “taco” you don’t speak is actually spoken globally
@marycatherinelebouef-op4hf
@marycatherinelebouef-op4hf 11 ай бұрын
Wowza! Love that handle. It truly looks amazing! Great job! Bravo!
@mukahschiffer156
@mukahschiffer156 4 жыл бұрын
Eu adoro esse cara,ele parece ser muito gente boa,deve ser daqueles que faz churrasco em casa e ninguém precisa levar nada ,ainda compra cerveja boa pra todo mundo. Esse cara é incrível.
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank you
@danhewitt1984
@danhewitt1984 5 жыл бұрын
Would make an awesome shifter for a rat rod ppl would pay good money for that I sure would. Great job
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you ! Yes it would, and it seems many think the same thing.
@fayyazali3155
@fayyazali3155 4 жыл бұрын
its a treat to eyes watching u creating those amazing things ... love n respect from pakistan
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank you Fayyaz
@uncleknife9887
@uncleknife9887 Жыл бұрын
That's rad. A pistol grip or shotgun butt made in that fashion would be next level! ⛽🔥
@PohlBarnProductions
@PohlBarnProductions Жыл бұрын
Shot gun stock would be Heavy as Hell, I did think about grips for a 1911 though
@JohnRowley
@JohnRowley 5 жыл бұрын
This is an interesting idea. I'd be interested to see a version done where the first cast was narrower - then this cast was put into a second fatter cast of resin so that when turning the screwdriver handle's on the lathe there would be a buffer zone of clear resin and the shell casings would remain intact behind this at the finish.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You John, that's an Idea, I was after the cut away look when I turned this,
@JohnRowley
@JohnRowley 5 жыл бұрын
The Pohl Barn Productions Thanks for responding. Yep, I figured you knew what you were doing :) I wonder what you’ll do next!
@SprayIgniteBoom
@SprayIgniteBoom 5 жыл бұрын
But why? either way your attention to detail is commendable;-) Great work✌️👌🖖
@SunJ79
@SunJ79 5 жыл бұрын
357, 45ACP, 40S&W, 22Mag, 223, (but why would you have 9mm when there's a 40 or 357 handy)-you're speaking my language now! (Born and raised WY, those numbers mean more than telephone numbers) Might have tumbled them a bit to get them pretty, but the handle turned out awesome! And for the naysayers, carbide is far harder than brass...just sayin'. Fantastic idea!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
well the 40 belongs to my son in law, and the rest are pricey to just throw down range, 9mm's are cheap ! I thought about tumbling them after the fact, did I miss what the naysayers were sayin ? I knew I could cut the brass with the carbide I just didn't expect the brass to be that hard, I should have run the lathe faster than I did. Glad you liked it, it really was an experiment that turn out Great I think.
@brnforce
@brnforce 5 жыл бұрын
Like, when you say something such as "carbide is far harder than brass" my brain completely agrees. Yet my thought watching the video was "Man, he better watch out for that metal". lol, weird how sometimes it just doesn't click.
@SunJ79
@SunJ79 5 жыл бұрын
@Azhaar Laghari Because I own a 45 & 40, both of which have more kinetic knock down power than a 9mm. Have had 9's-have no use for them. Personal preference-if you like the 9mm platform, good for you. I prefer the 45 & 40-is what it is.
@sithyarael6807
@sithyarael6807 5 жыл бұрын
@thomas lee good old 40 short & weak. Most LEO's and Feds have gone back to the 9mm as better generation of bullets than when the short and weak came out. Now 10MM is where it is at for the non-pussy feds.
@SunJ79
@SunJ79 5 жыл бұрын
I've put my 40 up against a 9, and it's by no means weak. If I feel it's not enough, I'll carry my 45. As said, you're entitled to your opinion-doesn't mean I have to agree with it, nor you mine.
@beckymcdaniel6402
@beckymcdaniel6402 Жыл бұрын
Impressive and astonishing! My father, who was a mechanic would have loved this!
@PohlBarnProductions
@PohlBarnProductions Жыл бұрын
Thank you Becky
@reubprue8602
@reubprue8602 5 жыл бұрын
Well that was awesome! One of a kind. Any gun enthusiast would love to have one but in stead a gun barrel cleaner. I for one! Truly awesome!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! it was a gift for my Dad, that was a snap on screwdriver and the handle had just disintegrated in the tool box, I would be cool for many things, shifter knobs, knife handles, gun grips, the casings were really hard, trying to anneal them so I can try again with a different project.
@thomash.l.9382
@thomash.l.9382 5 жыл бұрын
3:50 looks like that scene from Jaws where he's burning the wax and loading his gun
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
lol
@olkenhenry8560
@olkenhenry8560 5 жыл бұрын
Фигасе резец и метал режет и эпоксидку! Вещь оригинальная!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you
@Artem0023
@Artem0023 5 жыл бұрын
дак латунь она мягкая , вот если бы стальные были гильзы то да , а так это не сложно
@barsikusatyi8554
@barsikusatyi8554 5 жыл бұрын
аккуратно вполне можно
@user-wy7ve2rt7s
@user-wy7ve2rt7s 5 жыл бұрын
Металлокерамика...
@user-mz2yk7jc3s
@user-mz2yk7jc3s 4 жыл бұрын
Olken Henry х
@BOHUNTER
@BOHUNTER 4 жыл бұрын
That's a real project tool! Someone will keep that a long after your gone brother!
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
You got that right!
@shutupack5389
@shutupack5389 5 жыл бұрын
This is really relaxing to watch.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@firebirdude2
@firebirdude2 5 жыл бұрын
Large diameter handles let you get lots of torque...... long screwdriver shafts eat up torque.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You, I'm sure my Dad is never going to use that for anything other than to show it off, and the handle is the right size for his arthritis .
@linerror
@linerror 5 жыл бұрын
always used the long screwdrivers to spin the shank fast with my finger tips. if the length of the driver is causing serious torque problems you're probably doing something wrong. phillips is trash anyway.
@davids4767
@davids4767 5 жыл бұрын
+firebirdude2 actually long screwdriver shafts don't eat up torque. The reason for this is torque is in units of force times distance, but the distance of course is not distance along the axis of rotation (the screwdriver shaft) but instead distance away from the axis. This is one reason screwdrivers have handles; the bigger the handle, the more torque to the shaft is provided by a given force. Not the length of the shaft.
@builtbypottsy-byrdkrap
@builtbypottsy-byrdkrap 5 жыл бұрын
Dude... That is simply kick-ass
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you !
@octaviocorona7398
@octaviocorona7398 5 жыл бұрын
Wooooow !!!! Se ve increíble y el toque de resina roja le dio mucha vista !!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@stickywicked447
@stickywicked447 Жыл бұрын
gotta be the coolest screwdriver handle ever made 😎
@PohlBarnProductions
@PohlBarnProductions Жыл бұрын
Thank you
@FairlaneFox
@FairlaneFox 5 жыл бұрын
okay... NOW i want to make resin .22lr grips for my berreta 21....
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
I thought about knife handles, but I'm not so sure the casings will stay in the resin while cutting them that thin,
@FairlaneFox
@FairlaneFox 5 жыл бұрын
@@PohlBarnProductions i would love to see that tried even still. I feel if maybe you used .22lr casings and layed them flat along your path of cut they may stay within the resin for the most part.
@stoveboltlvr3798
@stoveboltlvr3798 5 жыл бұрын
Neat idea, I bet a 12 or 10 gauge shell suspended in the tube center would look cool too!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! It would and would be easy enough to do, I've put 410 shells into ink pens after casting them in resin.
@blacklocksmith.918
@blacklocksmith.918 5 жыл бұрын
Не перестаю восхищаться Вашей работой и идеями!!!!!Супер!!!!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! I'm glad you like it.
@Unsub424
@Unsub424 5 жыл бұрын
That is downright gorgeous! Love the creativity. I'd love to have one of those in my box. A+
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@aleksandarlukrevski8501
@aleksandarlukrevski8501 5 жыл бұрын
still i think a shifter would be cool ... maybe next project ...
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
lol thank you,, yes I am going to do a shifter for my Model A, I'm working on that now.
@LetoZeth
@LetoZeth 5 жыл бұрын
Damn, that's a really cool screwdriver.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@EANJGB
@EANJGB 5 жыл бұрын
FOR A FIRST ATTEMPT MATE I THINK YOU DID A BLOODY GREAT JOB AND YES I LIKED THE IDEA FROM VICTOR FOR A GEAR SHIFT KNOB , REAL NICE .
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You Ean, I have to anneal the casings first to soften them up for easier turning, I plan to make one for my Model A.
@lynnbuckley7350
@lynnbuckley7350 4 жыл бұрын
It's the best handle EVER ! ! ! ! ! ! LOVE LOVE LOVE
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank you Lynn
@312saxon
@312saxon 5 жыл бұрын
How much did you shell out on resin
@superkittybtc
@superkittybtc 5 жыл бұрын
be a great shifter knob
@TheSeveth
@TheSeveth 3 жыл бұрын
that is really cool, you work with so many different items ...ty Anna
@PohlBarnProductions
@PohlBarnProductions 3 жыл бұрын
Thank You Anna
@dyslexicsheeple931
@dyslexicsheeple931 5 жыл бұрын
A handle any gun owner would purchase. Its chunky size is great for we elders with joint pain. Great way to recycle using the spent bullets.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you
@adt7737
@adt7737 5 жыл бұрын
or may be a handel grip fora pistol
@BlackAceDeathRose
@BlackAceDeathRose 5 жыл бұрын
i like the idea of the red epoxy in the brass, but now im curious as to what it would look like if it was all clear.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! It probably would of been dirty as I didn't think to clean the casing before I poured the resin.
@RayRand
@RayRand 5 жыл бұрын
I just love how the process creates a cross section of the bullets just by scraping layers off with the lathe.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! I think that the coolest part also, kind of like a cut away of an engine.
@hikeaphoto746
@hikeaphoto746 5 жыл бұрын
That one was awesome! I sent to my bro which would want me to make him one. I not ever used resin yet. Very nice! Thanks!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you
@onlyonemrxonlyonemry306
@onlyonemrxonlyonemry306 5 жыл бұрын
I can use that to.....😈
@leandronunes1127
@leandronunes1127 5 жыл бұрын
Obrigado pela dica...em meu bairro temos MILHARES dessa esparramadas ao chão diariamente e já estamos sem idéia doq fazer com elas...gosto de meu presidente mais ele pretende liberar as armas e assim teremos mais ainda...Espalharei a idéia é faremos ENORMES Tortem de resina. 👍Like !!!
@franchini8790
@franchini8790 5 жыл бұрын
Leandro Nunes você é do Rio?
@SSGSativa
@SSGSativa 5 жыл бұрын
One of the prettiest screwdriver handles I've ever seen! Nice work!!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you !
@SSGSativa
@SSGSativa 5 жыл бұрын
The Pohl Barn Productions No, thank YOU! It turned out amazing, I enjoyed watching, and it gave me some ideas with spent casings and resin that I've been wanting to do for a while now. Thank you again, good sir!!
@cjrayscorpian91
@cjrayscorpian91 5 жыл бұрын
Wow, That is awesome. I am so amazed at how nice it turned out.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You....it did turn out nicer that I expected.
@yasuoito2405
@yasuoito2405 5 жыл бұрын
Нихуя не понял , но очень интересно.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you
@user-ef1by3ko8s
@user-ef1by3ko8s 5 жыл бұрын
hahahahahaha
@user-hh1tl7bd3h
@user-hh1tl7bd3h 5 жыл бұрын
хули там понимать)))взял тюбики от губной помады,залил эпоксидкой,и получилась рукоятка для отвёртки)
@don.t_forget.
@don.t_forget. 5 жыл бұрын
@@user-hh1tl7bd3h на изи
@hurricanearthur9742
@hurricanearthur9742 5 жыл бұрын
Me too bro. I didn't understand this project at all.
@caleboackes9669
@caleboackes9669 5 жыл бұрын
I watched you make this for over 15 minutes and you didn't even screw in anything with it
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! LOL I never thought about it, I made it as a gift and hadn't actually planned on using it.
@robertbragg9364
@robertbragg9364 5 жыл бұрын
That was absolutely amazing
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You...
@cbcarper9681
@cbcarper9681 Жыл бұрын
Great beautiful screwdriver handle. I wish I could make something like that wonderful video.
@PohlBarnProductions
@PohlBarnProductions Жыл бұрын
Thank You Thank You
@user-ve5lg6dl4b
@user-ve5lg6dl4b 5 жыл бұрын
Столько ебатория,чтобы украсить сраную отвертку?!...
@murrmaid26
@murrmaid26 5 жыл бұрын
uses as chisel, loses non-dominant hand.
@crazycoyote1738
@crazycoyote1738 5 жыл бұрын
Great idea, beautiful results. You have a good head on your shoulders!! Thanks.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you !
@ErikS-
@ErikS- 5 жыл бұрын
Beautifully made. I like the effect of the red filling in the casings.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you
@ediedarleneedgmon5301
@ediedarleneedgmon5301 5 жыл бұрын
Very ingenious, looks great 👍🏻
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you
@PaganWizard
@PaganWizard 5 жыл бұрын
This is the best dam looking screwdriver I have ever seen in my life!!!!!!! GREAT JOB!!!!!!!!!!!!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You !
@jerryw691
@jerryw691 4 жыл бұрын
One of a kind...NICE JOB
@thedealerofdeath100
@thedealerofdeath100 5 жыл бұрын
My truck needs a shifter knob along with headlight and radio knobs. Looks great man!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You !
@AJB2K3
@AJB2K3 5 жыл бұрын
That worked out great, the colour contrast is excellent!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you ! I liked the color contrast of the Flo Red, but others didn't. to each their own, I'm glad you liked it
@donfillenworth1721
@donfillenworth1721 5 жыл бұрын
Wow! That looks sharp! Thanks for sharing.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you !
@MsNovemberDaisy
@MsNovemberDaisy 5 жыл бұрын
This was a very cool project!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@metalman065
@metalman065 4 жыл бұрын
That's really cool, I like that a lot.. Awesome job Doug.
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank you Jimbo
@rossbixley3173
@rossbixley3173 4 жыл бұрын
I have never come across another site with as many people commenting regardless of whether they are for or against. You definitely attract a large albeit polarized audience. I like your ideas and style. Best regards ROSS
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank you Ross, not everyone has to like what I do or make, most of them have their own taste some are just tasteless, that's a nice way to put it, but either way it's a view and helps my channel if they comment. so it doesn't really bother me
@ConnieConnie824
@ConnieConnie824 Жыл бұрын
I make skulls with casings all the time. Very Cool 👍🏻
@PohlBarnProductions
@PohlBarnProductions Жыл бұрын
I know I see them ! very cool
@ConnieConnie824
@ConnieConnie824 Жыл бұрын
@@PohlBarnProductions Thank you 😊
@thomasarussellsr
@thomasarussellsr 5 жыл бұрын
That is one nice handle. Love the almost blood red fill in the casings. Great job.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You !
@richardpalmer6196
@richardpalmer6196 4 жыл бұрын
As a multi-caliber shooter , l love this grip , as a fan of resin Turner channels , l love the quiet shout out to Nick , with the Yorkshire grit . Stat healthy , keep posting .
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank you Richard,
@richkeelan1312
@richkeelan1312 4 жыл бұрын
Great idea Doug it came out awesome Great job
@PohlBarnProductions
@PohlBarnProductions 4 жыл бұрын
Thank you Rich,
@bentley1960
@bentley1960 5 жыл бұрын
I always tell folks when they ask me about my long screwdrivers, thats my Monday morning screwdrivers, for when you don't want to get too close to your work.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
lol I'm not even sure he's even used it more than once or twice, the handle disintegrated in the tool box.
@AlBarathur
@AlBarathur 5 жыл бұрын
Awesome idea! Looks really good.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You !
@Blackmoerder
@Blackmoerder 5 жыл бұрын
Wow .. very good job!! Beautiful work
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@FreedomYak
@FreedomYak 5 жыл бұрын
That has to be the coolest screwdriver in the shop. Nice work.
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@deniseflick6556
@deniseflick6556 5 жыл бұрын
Wow!! What an amazing idea. You do excellent work. Thank you for sharing your knowledge and skills with us. Keep up the good work my friend!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You
@syvajokimies450
@syvajokimies450 5 жыл бұрын
That is awesome! It would great shiftknob too!
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank You ! Yes it would !
@dozer1642
@dozer1642 5 жыл бұрын
That thing is really cool. Thanks for posting👌
@PohlBarnProductions
@PohlBarnProductions 5 жыл бұрын
Thank you !
woodturning - Swamp Stick Vase
19:27
The Pohl Barn Productions
Рет қаралды 3,5 МЛН
Shifter Knob, Ammo casing in resin
23:34
The Pohl Barn Productions
Рет қаралды 1 МЛН
格斗裁判暴力执法!#fighting #shorts
00:15
武林之巅
Рет қаралды 87 МЛН
СҰЛТАН СҮЛЕЙМАНДАР | bayGUYS
24:46
bayGUYS
Рет қаралды 746 М.
Joven bailarín noquea a ladrón de un golpe #nmas #shorts
00:17
Honeycomb Scales Composite Material
11:32
Black Beard Projects
Рет қаралды 558 М.
Making a Forged Knife w/ SPIDER 🕷 in Epoxy Resin Handle / Giveaway
13:54
Fire Pit Choke Cherry #yarnbowl #yarnlife #yarn
32:13
The Pohl Barn Productions
Рет қаралды 3,4 М.
SIMPLE tech. Battery draws on metal
9:15
Kirill Runz
Рет қаралды 15 МЛН
How to make epoxy coasters//with bullet casings!!
7:03
Frontier Designs
Рет қаралды 7 М.
Epoxy resin & stabilized wood tool handles
9:12
ZH Fabrications
Рет қаралды 3 МЛН
Building a V12 Epoxy table in 10 Minutes!
12:55
Grind Hard Plumbing Co
Рет қаралды 396 М.
Clear Epoxy Knife Handle! See Through It
8:00
Komar Project
Рет қаралды 57 М.
Purple Vase
23:48
The Pohl Barn Productions
Рет қаралды 433 М.
77 BULLETS EPOXY COFFEE TABLE  - 308 WINCHESTER
15:44
Big Time Good Time
Рет қаралды 11 М.
Самолёт Падает! Но Осталось 2 Парашюта... @NutshellAnimations
0:35
Глеб Рандалайнен
Рет қаралды 2,1 МЛН
狼来了的故事你们听过吗?#天使 #小丑 #超人不会飞
0:42
超人不会飞
Рет қаралды 56 МЛН
Чья эта клубника ?
0:30
ЛогикЛаб
Рет қаралды 1,8 МЛН