These are the STRANGEST 6-cylinder engines | Ep. 1
Рет қаралды 104,519
Күн бұрынIs there a more popular performance engine layout than a 6-cylinder? Possibly, but there is definitely a lot of strange 6-cylinders out there.
Vlog Channel:
/ @visioracervlogs2741
- Disclaimer -
This video is fair use under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work.
- Credits -
“01 Johnson 225 after rebuild” by 2thumbsfishing
• 01 Johnson 225 after r...
“Evinrude 225 V6 idle” by tomzern
• Evinrude 225 V6 idle
“JOHNSON/EVINRUDE 175HP V6-2T” by Vitaliy Vash
• JOHNSON/EVINRUDE 175HP...
“Evinrude Etec 150 HO Pure engine sound” by Caloundra Marine
• Evinrude Etec 150 HO P...
“Vr6 Engine Start up” by Stanced Euro
• Vr6 Engine Start up
“2011 HOREX VR6 1200 engine 3D technical animation official video” by fastbikesse
• 2011 HOREX VR6 1200 en...
“Horex VR6 six cylinder sound” by Martin Rigó
• Horex VR6 six cylinder...
“Horex VR6-Engine Soundcheck” by MOTORRAD
• Horex VR6-Engine Sound...
“HOREX VR6 Classic HL Sound und Wheelie” by HOREX Motorcycles
• HOREX VR6 Classic HL S...
“golf mk2 vr6” by Chris Veenstra
• golf mk2 vr6
“MV Agusta 350 6 cylinder Warm-up” by ChokeSlam123
• MV Agusta 350 6 cylind...
“Honda RC166 (1966) - 6-Cylinder 250cc GP Racer” by Deckay_F
• Honda RC166 (1966) - 6...
“MV Agusta 6 cylinder Centennial Classic TT 2010” by GBHenkie
• MV Agusta 6 cylinder C...
“MV Agusta 350 6 cilindri” by Pietro Scarone
• MV Agusta 350 6 cilindri
“Steve Plater Honda RC166” by Peter F.
• Steve Plater Honda RC166 .
“Porsche Motor PFM 3200 aus dem Jahr 1991 mit 220 PS” by MKROXTON
• Porsche Motor PFM 3200...
“Porsche Mooney 11 16 13” by Taildragger726
• Porsche Mooney 11 16 13
“Lycoming O-435 Walk Around” by Charles Rooks
• Lycoming O-435 Walk Ar...
“USAAF 1945 Stinson L-5/G Sentinel L-Bird First Start Lycoming O-435” by Jan Johnson
• USAAF 1945 Stinson L-5...
“Engine Test Running 2017 02 24 #1” by flyinglow22
• Engine Test Running 20...
“Mooney M20L PFM 3200 low and over” by Humberto D
• Mooney M20L PFM 3200 l...
“McLaren HONDA MP4/4 1.5L V6 Turbo Exhaust Sound!!!!” by Air Kei Motors
• HONDA MP4/4 1.5L V6 Tw...
“MP4/4 Start Up” by McLaren
• MP4/4 Start Up
“Ayrton Senna's MP4/4” by 秋
• Ayrton Senna's MP4/4
“McLaren Honda MP4/4 (1988 late) vol.2 - Ultimate V6 Turbo engine” by Deckay_F
• McLaren Honda MP4/4 (1...
“68 GMC K2500 with 478M V6” by Peter Chronis
• 68 GMC K2500 with 478M...
“1968 GMC CM2500 w/478 V-6” by noshsreqd
• 1968 GMC CM2500 w/478 V-6
“Detroit Diesel 6V92 Series Engine For Sale! Walk Around | CA TRUCK PARTS” by CA Truck Parts
• Detroit Diesel 6V92 Se...
“Detroit Diesel 6v92 rebuild - Initial startup” by davidlewismd
• Detroit Diesel 6v92 re...
“DETROIT 6V92 NATURAL STARTUP” by OldForgePower
• DETROIT 6V92 NATURAL S...
“Detroit 6V92 1980 RoadBoss” by outbackjess
• Detroit 6V92 1980 Road...
“1977 Ford L9000 Detroit 6v92 9 speed shifting” by Donald Martin
• 1977 Ford L9000 Detroi...
“Artura: The Full Force of McLaren” by McLaren Automotive
• Artura: The Full Force...
“All New McLaren Artura is here - Interior, Exterior, Sound” by REC Anything
• Video
“McLaren F1 driver Daniel Ricciardo drives the new McLaren Artura” by hotsupercars
• McLaren F1 driver Dani...
“DELIVERING THE NEW HYBRID MCLAREN ARTURA IN A SNOW STORM!! FULL WALKAROUND AND DETAILED OVERVIEW” by Supercars Of Westchester
• DELIVERING THE NEW HYB...
@MrTheHillfolk 3 жыл бұрын
The sound of a VR6 is intoxicating and mesmerising, nuff said.
@nolahahnshouse3389 3 жыл бұрын
Every day bro!
@jeffc7486 3 жыл бұрын
They're def getting harder to find in the states, a decent one for that matter.
@nolahahnshouse3389 3 жыл бұрын
@@jeffc7486 tell me about it! Just got off the phone with my mechanic and can't find a rack and pinion anywhere in the world (literally) and yes getting very rare to find in good condition.
@poldpoldecki7171 3 жыл бұрын
Naaaaah... One cylinder too many. R5 PO-WAH BAY-BEH! :-P
@coreygolpheneee 8 ай бұрын
I think it's the air intake that does it, it's just so complex of a sound
@SoFloCamejo 3 жыл бұрын
The Evinrudes came as 60 and 90 degree bank angles, with displacements of 2.5, 2.6, 2.7, 3.0, 3.3 and 3.4L. There’s a ton of them still out there, crossflows and Loopers as well!
@markfrost8745 3 жыл бұрын
Sam made a comment about the Lycoming O-540 series (8.87L) and the Continental O-550 series (9.05L), but Lycoming also made a short lived O-580 series (9.55L) originally slated for the Cessna 206 Stationair. It had many issues, Cessna went with the 540 instead. After the issues were fixed, the 580 found use in some aerobatic airplanes like the Extra 330.
@TheKnobCalledTone. 3 жыл бұрын
That Evinrude 2-stroke would make a great engine swap for a Trabant.
@fidelcatsro6948 3 жыл бұрын
sleeper trabant!
@necrothescistt8164 3 жыл бұрын
or as a snowmobile engine. But good ol' epa decided: No more engines bigger than 1000cc in those evil snowmobiles.
@razortreadway 2 жыл бұрын
Or a Miata
@spaceace1006 2 жыл бұрын
Apparently, all new Outboards are 4 stroke now!
@nolahahnshouse3389 3 жыл бұрын
I love my vr6 corrado.. gone to the shop for some work yesterday! Can't wait to take her out for a drive when she is finished .
@nacholebrehllama68 2 жыл бұрын
Everyone who has played Forza Horizon loves the Vr6 corrado too
@EdwardAlcala 3 жыл бұрын
I own a VR6 12 valve. Best sounding engine I have ever owned lol
@jeffc7486 3 жыл бұрын
I miss mine :(
@EdwardAlcala 3 жыл бұрын
@@jeffc7486 I do too, mines been on jacket and since Covid
@dehsantanao1 3 жыл бұрын
@@jeffc7486 miss mine VR6 variant too 😞😞😞😞
@isaiahmountford5815 3 жыл бұрын
I miss the sound of mine on canyon runs. Pure art.
@yoshi555king 3 жыл бұрын
I still need to drive one 12v vr6. I’ve driven the 24v vr6 seat leon cupra 4 with superspint exhaust and it was a blast to drive
@LITSClassicGaming 3 жыл бұрын
that 80s F1 looks soo good
@fidelcatsro6948 3 жыл бұрын
1.5 litre cat with 900hp!! i assume these engines arent going to last very long with all that high output!
@Hugo-um8nh 3 жыл бұрын
@@fidelcatsro6948 1.5k hp i qualifying mode, with up to 6.5 bar of boost for the BMW
@fidelcatsro6948 3 жыл бұрын
@@Hugo-um8nh yeah those engines wont last 15k miles
@Hugo-um8nh 3 жыл бұрын
@@fidelcatsro6948 they didn't last more than two laps.
@fidelcatsro6948 3 жыл бұрын
@@Hugo-um8nh ay caramba!!
@waldkrause6878 3 жыл бұрын
Great video again! The sound of the MV Agusta is addictive, I have read about the Horex but never saw one. Thank you, for the great content!!!
@andyharman3022 3 жыл бұрын
If somebody told that I have to buy a motorcycle, I would definitely get the Horex. It sounds SO sexy.
@tatoween1 3 жыл бұрын
Keep up the good work man, I have been following you for years now. Never stop!
@mikepreciado7807 3 жыл бұрын
Ive been watching you for some time. Great content! Keep up the great work! Thank you
@micsub 3 жыл бұрын
Excellent video as usual, full of info. Thanks for sharing all that knowledge and time spent on research. Really very much appreciated.
@patrickdunster1083 3 жыл бұрын
I love your videos dude! I know a lot of the base information you present but the way you get it out is awesome and the details you give are excellent!!! Thank you and keep it up!
@jetstream454 3 жыл бұрын
I am a simple man. I see a new VisioRacer video, I click like.
@carguybikeguy 3 жыл бұрын
I love this stuff. But for the life of me, I don’t understand why someone would downvote any of these videos.
@cluricaun78 3 жыл бұрын
another amazing episode! Love hearing all those cool engines
@snabbt 3 жыл бұрын
Awesome video like always, thank you!
@bryco32 3 жыл бұрын
Your english is getting so Damn good!! It's amazing how you picked it up so fast! Oh to be young! One of my (Sport shooting) Shooting buddies was Born in Slovakia and his accent and vocal range in speaking english is exactly the same as yours! Every weekend we get to shoot together I am reminded of your channel and I am anxious to get home and see if you have posted any videos. He is from Nižná Polianka If I remember correctly. (probably butchering that please forgive) He and I are both Long term subscribers and motorheads!... and we are always glad to watch your videos. Thank you for taking the time to make them and share them with us! na zdravie!
@VisioRacer 3 жыл бұрын
Thank you very much! Na zdravie 😄
@valiantxsquire 3 жыл бұрын
Your channel is awesome, thank you
@nachtdiertje78 3 жыл бұрын
Great video again ! Thank you ☺️
@backyardrestorations 3 жыл бұрын
You’re so underrated
@Casper5 3 жыл бұрын
453k subs underrated? Idk man...
@CSLFiero 3 жыл бұрын
do succ
@gregedwards1087 3 жыл бұрын
Always informative and interesting, Thanks VR. 😊😊👍
@ricepony33 3 жыл бұрын
So good as always!
@hans-peterklein5303 3 жыл бұрын
Very cool Videos Credits! Thanks to you I've discovered some cool machines and cars. I'd love to see one with hot bulb engines :) they were mainly used in tractors and sound great!
@HomebrewSubaru 3 жыл бұрын
Some of those 6's sound amazing. Good to see you Visio
@jeffmatson2046 3 жыл бұрын
I truly appreciate and enjoy this channel his diligence to detail factors of automotive displacements and history. Is very professional and teaching moments for all of and future technicians. Great job 👍💪
@VisioRacer 3 жыл бұрын
Thank you!
@jamesaucutt8284 3 жыл бұрын
I love your videos they answer so many questions I’ve been asking myself
@rockdog2584 3 жыл бұрын
That big Jimmy 478 (7,8 liter) would be an awesome unit to come across! That is putting out some pretty serious torque, for a gas engine. The VW WR6 was just coming into being, when I gave up being a VW mechanic. Consequently, I never laid my hands on one. I hear that the 3,2 liter version of that motor can be a real screamer. The shot of the guy driving the Detroit powered truck is good. You don't see many people double-clutching shifts anymore! That McLaren looks like something that Chris Harris would have fun throwing around on a nice tight track. Btw...it's good to finally see the face behind the wonderful voice that narrates these ever-entertaining videos! Keep up the good work, my friend.
@changeitup3030 3 жыл бұрын
Love your channel 👍
@VisioRacer 3 жыл бұрын
Thanks!
@eugeneugenius3399 3 жыл бұрын
Mighty Two Stroke ! =) Thank's for video
@Oddman1980 3 жыл бұрын
Those GMC V-6's always sound good. I had the chance to get an old GMC truck that had the 305 V6 but I wasn't able to.
@turbo8454 3 жыл бұрын
I have a collection of those V6's. A 478M powers my dump truck.
@Aikaramba12 3 жыл бұрын
Evinrudes sound so good!
@luchacefox259 2 жыл бұрын
RUDE in a good way!
@jamest.5001 3 жыл бұрын
Awesome as always, I have a 5.0 v6 GMC engine! I hope to get going someday, to work as a engine for a generator!
@marcalampi5036 3 жыл бұрын
I love your channel.
@electric7487 3 жыл бұрын
I really want Detroit to bring back the Series 92 as opposed-piston engines. Now that would be cool.
@charlesball6519 3 жыл бұрын
That would be nice, but the EPA wouldn't allow it. These days we have to put up with rebadged Mercedes engines.
@Parents_of_Twins 3 жыл бұрын
@@charlesball6519 Actually MTU makes the 2 stroke Detroits now just rebranded as MTU's. I think they purchased the rights or something like that but they are still made. Next time you get to hating on the EPA check out the Great Smog of London or the Great Smog of 1952 and you can see what happens when industry is left unchecked. I'll give you the punchline of the story between 4000-12,000 people died and over 100,000 were made sick. It's not the EPA's fault that automotive engineers took the laziest cheapest possible way to make their engines compliant. I'm no fan of EGR, SCR, and DEF but I am a fan of breathing as I'm sure you are as well. So direct your ire towards the Corporations who would rather pay their CEOs 10-50 million/year than spend that money on researching a better way of meeting guidelines that allow us to breathe.
@jamesgeorge6551 3 жыл бұрын
Achates diesel my freind.
@yamahama9650 3 жыл бұрын
I always saw the old golf vr6 as the German version of a cheap muscle car. They used to be every where. Most have been taken by the rust gods or transmission demons. Rest in peace my vr brothers.
@fidelcatsro6948 3 жыл бұрын
they'd have lasted longer with simple manual transmissions
@nicostenfors5690 3 жыл бұрын
And they were plagued by bad timing chain components. But i'd gladly buy one if i found one for a good price.
@wohnwagenfutzi8533 3 жыл бұрын
Ye, the VR6 are even rare in Germany now....
@Mr_Glenn 3 жыл бұрын
@@wohnwagenfutzi8533 I'm proud to own a VR6 3.2 :).
@davosworks 2 жыл бұрын
@@wohnwagenfutzi8533 VW is still making them :P In USA VW Atlas, 3.6 VR6 206kW And in China VW Teramont and Talagon, with 2.5 Turbo VR6 220kW and 500nm
@nicolasbiette5573 3 жыл бұрын
Beautyful research, lot of thanks for the vidéo 💪👍🏍🏍🏍
@kimpatz2189 3 жыл бұрын
The angle of 120 between banks in a V6 is also the combustion angle of any 6 cylinder engine. The smoothest in power delivery in any V engine, excluding the twin I6 V12, but only defeated by the I6 in its glorious balance. The V6 is basically an I3 stuck together with practically the same rocking motion and rough running I3.
@DD12V71T 3 жыл бұрын
120 deg V6 also used in russian BMP-1,2 and some other military chassis - UTD-20 and 5D20 engines.
@Ronnymikkonen2686 2 жыл бұрын
It's really fun watching.
@audriusbaranauskas6227 3 жыл бұрын
Well you got my "youtube trust" - press like first, then watch the video. Great video. P.S. I had a VW Golf gen III with the 2.8 vr6, great engine. A friend of mine had a VW passat with the 2.3 vr5 - not so great...the vr5 wasn't fast (110kw) and drank lots of fuel for a 2.3L...
@VisioRacer 3 жыл бұрын
Thank you! Once I was thinking about getting a VR-5, but ended up with a regular inline-5 😁
@Xayuap 3 жыл бұрын
@@VisioRacer why?
@nobodysfavourite6953 3 жыл бұрын
@@Xayuap do your research (;
@user-fe8ms9ht7j 3 жыл бұрын
Episode 1? hell yeah
@MerlinOpeth 3 жыл бұрын
Love the videos,was the last one shot in Toronto,Yonge and sheppard?
@tatoween1 3 жыл бұрын
That Mooney flyby @ 4:20 was amazing to my ears.
@aaronburratwood.6957 3 жыл бұрын
I’m building my unicorn foxbody mustang at the moment and I’d love to import a Ford Barra engine from Australia backed with a six speed manual. I’m not able to drop $5000+ usd yet but it’s a ways away from that point anyway. I’m just building it on nights & weekends. Great video Visoracer, by far my favorite engine channel. 👍🏽
@VisioRacer 3 жыл бұрын
Wish you all the luck! And thank you ☺️
@aaronburratwood.6957 3 жыл бұрын
@@VisioRacer All in due time my friend, I have patients. Thank you.
@VisioRacer 3 жыл бұрын
@@aaronburratwood.6957 Good for you, building a project require a lot of patience, I imagine.
@aaronhumphrey2009 3 жыл бұрын
Another option is a built 300 with forged chevy 327 pistons ..and an aftermarket crossflow head..turboed ,or Vortec supercharged..
@baldufdaniel 3 жыл бұрын
Wow never heard of those gm big block v6 suoer cool and it sounded amazing
@justletitsliiide 3 жыл бұрын
Oh wow! 1:09 I live a short drive from there haha Super cool to see it on here!
@pauloconnor7951 3 жыл бұрын
Pronunciation is improving. :)
@donchristianson3153 3 жыл бұрын
I regularly watch your posts ,I'm a old gearhead and d s m er I am surprised at your knowledge for a young guy 👍👍👍😊 . Most young american guys cant change a tire let alone understand how engines work !!!! Keep it up !!!!
@welshwarrior7197 3 жыл бұрын
Awesome vid but also...what about the Hudson Twin-H 308? Largest 6 cylinder to go in a car
@paulcochran5785 3 жыл бұрын
Chrysler 3.9 is interesting. 90 degree bank angle, with this odd crank pin split, and they came with a 2 barrel carb in earlier versions, and well as its pushrod design. Based off the chrysler 318 small block. Later chrysler made a 3.3L and 3.8L V6 for the minivans and jeep wrangler. They were up degrees with a 60 degree crank split, but was a pushrod engine and was the basis for the 2.7 DOHC, 3.5, and 4 liter V6 engines.
@robertkloppner4803 3 жыл бұрын
There was also a 2.9 liter vr6 engine design with around 190 hp in later models end of 1990s. In the early 2000s there was a even larger displacement vr6 engine with 3.2 liter in the golf 4 r 32 and audi tt 3.2
@Sam-in1sh 3 жыл бұрын
Lycoming makes the 540 and Continental has a 550 cubic in 6 cylinder
@984francis 3 жыл бұрын
That Horex! Superb.
@szymon6207 3 жыл бұрын
1988 mp4/4
@michiganmotorsports 3 жыл бұрын
Killer vid. I have an Atlas with the VR6 and 4 BRP products. 😆
@AaronSpielman 3 жыл бұрын
VW engineered the VR6 for Horex, and IIRC, own a large portion of the company.
@fidelcatsro6948 3 жыл бұрын
they also make bikes?
@AaronSpielman 3 жыл бұрын
@@fidelcatsro6948 technically, yes. Volkswagen AG, owns Audi, and Audi now owns Ducati. VW AG also own several other mothballed motorcycle brands as well. IIRC they have an option to buy Horex outright if they want to.
@raptorjeezus2607 3 жыл бұрын
@@AaronSpielman they have used a Ducati engine before in some prototype car, but I think Ducati still gets to make their own engines and Volkswagen just goes gimme
@AaronSpielman 3 жыл бұрын
@@raptorjeezus2607 Not sure about them using a Ducati motor (not saying you're wrong, just hadn't heard that), but yeah, they're a wholly-owned subsidiary.
@nopenoperson9118 3 жыл бұрын
@@AaronSpielman The XL Sport is powered by a Ducati V-Twin.
@russredfern167 3 жыл бұрын
Interesting. Cheers
@gabrielesala6336 3 жыл бұрын
6:42 that dude is driving bare footed
@gamingwithaustin2545 3 жыл бұрын
My mom does the same thing for some reason
@ThunderBassistJay 3 жыл бұрын
Just like me. 😁
@DeathMatch626 3 жыл бұрын
One weird 6 cyl to me, is the 4.3L v6 from GM, it is a small block v8 with the front 2 cylinders chopped off, and it lasted from the 80's all the way to early 2010's, because that's the thing, it is fairly modern, and I haven't seen such displacement on a v6 in recent times
@turbo8454 3 жыл бұрын
Actually Buick started that trend on the car side. They chopped two cylinders off of the 215 V8 and made the 90 degree V6 in the fall of '61. That engine, with refinements over the years, lasted until 2009. Detroit diesel did the same thing in 1957, modular V engines. GMC later ('66 model year) added two cylinders to the 478 V6 and produced a 637 V8.
@DeathMatch626 3 жыл бұрын
@@turbo8454True, i forgot about that fact, thanks 👍
@andyharman3022 2 жыл бұрын
GM produces another 4.3L V6 as base engine in its pickup trucks. It has no common parts with the old 4.3, and is basically the Gen V V8 missing two cylinders.
@joeAK7.62 3 жыл бұрын
i love you! best wishes from austria!❤❤❤❤❤❤
@andyharman3022 3 жыл бұрын
The V6 that Cosworth designed during the original F1 turbo era also had a 120-degree bank angle.
@mysock351C 3 жыл бұрын
8:58 Hey I know where that dealership is! Another one of those "look all you want, you'll never own" experiences driving by.
@chrisveenstra3339 3 жыл бұрын
Nice to see my golf mk2 on your video😄
@VisioRacer 3 жыл бұрын
Your engine sounds so good, indeed
@chrisveenstra3339 3 жыл бұрын
Thnx!
@TheFakeFatLegitimate 3 жыл бұрын
I’ve just moved from a vr6 to a 60° V6. The vr sounded much nicer. But I do like my 350z 🤗
@sauluribe7082 3 жыл бұрын
The Corvair's boxer 6. GMC's Toro-Flow diesel 478 V6 built from gas version used in city buses and garbage trucks.
@TommyWylie 3 жыл бұрын
I have seen on KZfaq a 2 stroke straight 6 made from two DKW 3=6 car engines! If you do a part 2 video can you include that one?
@davidstephens1092 3 жыл бұрын
Great video, but you missed a few. Ford did a V6 in the Capri, Chevrolet did the boxer style in the Corvair , Commer's common knocker and my favorite the Foden 6 cylinder 2 stroke diesel. These are just to name a few of the unusual 6's.
@VisioRacer 3 жыл бұрын
The Commer TS3 is a 3-cylinder with 6 pistons
@davidstephens1092 3 жыл бұрын
@@VisioRacer I would agree that it is named as a 3 cylinder engine, however every dictionary definition that I have ever seen, defines an "engine cylinder" as a cylinder that "a" piston moves in. So the question is did the manufactures have the right to call it a 3 cylinder or should they have called it an engine with 3 sets of conjoined cylinders. Either way it is a strange 6 piston engine.
@_n-Dee_ 3 жыл бұрын
Gracias 👍
@gassyirishman2859 2 жыл бұрын
Dear Ol’ Dad had a 1979 GM RTS II, it had a Detroit in it, I have no clue if it was 4 or 6 cylinder, V or Inline, or even if it was 2 or 4 stroke, I was too young, all I know is it was sideways in the back and the transmission went at an angle to the right rear corner behind the tire to a transfer case, forward to another case above the axle, and finally into the axle…the tire kicked shit up into the transmission and broke the seals. It leaked all the fluid out and burned up all the gears. We were stranded in New Mexico for 2 1/2 months and got a new transmission, only for the original 1979 airlines to pop in California 6 or so years later and drop all 29,000 pounds flat on the concrete where it probably still sits…at Willow Springs International Raceway…
@mattt198654321 3 жыл бұрын
Woah, your wall changed colors!
@VisioRacer 3 жыл бұрын
Yesss
@WhitfieldProductionsTV 3 жыл бұрын
swear your english is getting better.
@dehsantanao1 3 жыл бұрын
The vr6 makes the most beautiful sound that an engine can produce, except the subaru boxer
@hello7533 3 жыл бұрын
*laughs in e60 m5. *laughs in lexus LFA
@PoeticInsanity 3 жыл бұрын
Porsche flat 6*
@FabricioT3BUS 3 жыл бұрын
A good engine to mentioned is the Continental AOS895 boxer 6, used to Tank M41 and derivates
@pasmomoonde6077 3 жыл бұрын
I guess a down side to the vr6 engine is weight But on the flip side only one head gasket n valve cover gasket so cheaper to maintain than a v6??
@VisioRacer 3 жыл бұрын
I think that it definitely makes it easier to work on since there are no plugs in an angle on sides. Besides, really makes great noise!
@vivalesvegas 3 жыл бұрын
A possible topic for some time in the future: air cooled engines of luxury (at the time) cars, like Franklins. Usually inline 6’s, but there were also V12’s.
@504ownerofficial 3 жыл бұрын
beautiful
@flyingdutchman4794 2 жыл бұрын
6:50 They don't call them "Screamin' Jimmies" for nothing! [Detroit Diesel Allison used to be a GM subsidiary] Too bad about V-6s of < 4.0 L displacement; they all have a farty, dyspeptic exhaust note. Boxer-6s and inlines, OTOH, sound like burning silk - just gorgeous. US truck and agricultural equipment maker International Harvester built 7.3 L and 8.2 L inline-6s which, in a good state of tune, had a booming sound all their own.
@Airforce1Gunny 3 жыл бұрын
Need to do a snowmobile engine episode.
@Sackmatters 3 жыл бұрын
There are so many options.
@connorssmallengines6663 3 жыл бұрын
Evinrude and Johnson 2 strokes would be cool to put in a car. They sound so good even though they are just a v6
@Aaron-be2pt 3 жыл бұрын
Did you ever see the video of the old Volvo with the Evinrude 8? kzfaq.info/get/bejne/gLyWpNSEx6iXgKM.html
@halfnelson6115 3 жыл бұрын
Speaking of outboards, Mercury just came out with a 600hp v12. $75k.
@davidcarpenter9232 3 жыл бұрын
I love the tech and your videos are always full of the tech can't say enough about it love your videos thanks Dave
@price8314 3 жыл бұрын
The biggest difference between lycoming and the automotive boxers is the need for a transmission to drive the prop. The carb is on the bottom of the oil pan via an updraft carb, they have 2 plugs per cyl, 2 mags, vacuum pump and everything is saftey wired and air cooled. The pistons are huge, they are like 2 of my fists wide.
@Lorenzo-kn9nf 3 жыл бұрын
6:40 fuck i forgot my shoes
@brianb-p6586 Жыл бұрын
The statement at @8:29 is incorrect - a 60 degree V6 is even-firing without offset crankpins.
@HaloACE56 3 жыл бұрын
Lycoming goes all the way up to 580 cubic inches, although the IO-550 is far more common. Continental also goes up to 550CI. All flat 6 engines.
@WouterB76 3 жыл бұрын
Truckdriver double clutching like a pro.
@naughtyponyracing 3 жыл бұрын
The new Pentastar in my Challenger is Dodges new trophy Engine. I can push the Sport button and it turns On. It revs super fast and gives it an amazing sound . The old v6 were lathargic and sounded horrible . 306hp and rips
@jmyd83 3 жыл бұрын
nice 👍
@draw5836 3 жыл бұрын
The F1 turbo v6 are cool and all but I really miss the v10 and v12s
@EliasSilva-ff7us 3 жыл бұрын
I really love the boxer engines
@aditya-br3kg 3 жыл бұрын
woah, new theme video
@VisioRacer 3 жыл бұрын
Not so new, I have made some strange engine videos already 😁
@aditya-br3kg 3 жыл бұрын
@@VisioRacer why "eps 1" ?
@VisioRacer 3 жыл бұрын
@@aditya-br3kg There are more interesting and strange six-cylinders 👌🏻
@aditya-br3kg 3 жыл бұрын
@@VisioRacer owh, alright, I will wait for your new video
@arthurn9237 2 жыл бұрын
YOU MISSED AN INTERESTING V6 APPLICATION IN THE EVINRUDE AREA HIGH PERFORMANCE APP WITH ADDED EXPANSION CHAMBERS A CRAZY SCREAMING SCARY FAST APP EVINRUDE JOHNSON AND O M C WAYYY KOOOL SOUNDING
@spaceace1006 2 жыл бұрын
I have a 2017 F150 XL With the 2.7 Ecoboost. It's rated at 325 HP. If given 93 octane fuel, the HP supposedly goes up to 345. It's the fastest vehicle I've ever owned! I'm willing to bet that it could beat my Harley Fat Boy in the Quarter Mile! (96" Engine)
@TheoSloat 3 жыл бұрын
I've never seen a 6 cylinder with a beard before, it was soo different it was shown twice!
@sid426_ 3 жыл бұрын
1:04 boy oh boy does that sound like a cammed hemi
@bawlout9367 3 жыл бұрын
Loved My MKV .:R32 peppy heavy lil beast it was. #SaveTheVr6 Now I Have A Stage 3 Focus ST. And love it, switch it up people have fun.
@taomicioli 3 жыл бұрын
forgot the ef15 renault..... the most winningest engine of the turbo f1 era!! 1500+hp
@mohis5664 3 жыл бұрын
Could we get Top 10 best sounding cold starts?
@thenewhalogod 3 жыл бұрын
4:11 let me introduce you to the TGIO-540 by Lycoming. A 8.9L boxer 6 with a massive turbo and mechanical fuel injection. much larger that the o-445.
@VisioRacer 3 жыл бұрын
Ohhh, okay. Gotta google that up, thank you 👌🏻
@thenewhalogod 3 жыл бұрын
@@VisioRacer rebuilt a few in my time, solid and reliable engines. Found on the Piper PA-31 Navajo
@turbo8454 3 жыл бұрын
@@thenewhalogod I have many hours in the PA31. That 540 is probably Lycomings best engine.
@RickJohnson 3 жыл бұрын
There's also the IO-550 from Continental and the IO-580 series from Lycoming.
@thenewhalogod 3 жыл бұрын
@@RickJohnson I was not aware of the IO-580, its a 583ci/9.55L boxer 6. I want one now.
@goodfodder 3 жыл бұрын
Suggest the AJ126 to add to your list
@pablojones5613 3 жыл бұрын
Evinrude, Rodney Rude's brother. Only Australians will understand.
@johnnybeverage 3 жыл бұрын
I wish I could like this video twice.
НОВОСТНИЧОК
Рет қаралды 16 МЛН
Volo Museum Auto Sales
Рет қаралды 13 МЛН
Авто Гараж 23
Рет қаралды 6 МЛН