I have baofeng, Kenwood, and anytone handhelds. In my work truck I always have a Uv5r. Using a rat tail, and nagoya knockoff I operate repeaters 25-30 miles away on a daily basis. Mountain terrain of PA.

Thank you for using the correct names for the SMA connectors. BaoFengs DO NOT use RP-SMA (Reverse Pair SMA) - they use Male SMA on the radio and Female SMA on the antenna as you said. Anyone who tries to connect a "reverse" SMA will find out quickly how different they are. In the worst case the antenna would fit (mechanically) but with no "hot" connection. Yikes. (RP-SMA are typically found on routers). So for those unfamiliar there are in fact FOUR SMA connectors: Male SMA, Female SMA, Male RP-SMA, and Female RP-SMA. '73.

Tested my two antennas today on a Vector Network Analyzer, Results: Baofeng UV-5R stock antenna resonates at one frequency only, 418 MHz. Fake Nagoya resonates pretty much only at a decent VSWR at 151 MHz. So they both are quite a compromise if you plan to transmit on any other frequencies.

"Mounted to my beer fridge" LMAO Love this channel.

It'd be cool to see a video testing all these different antennas on these radios. I know a ton of people have them and there's a ton of antenna options out there. It makes it kinda hard for a new guy to pick what antenna is hype and which is legit

Test for my Technician license tomorrow. Have studied for over 2 months and am ready. I guess the Baofeng will be my first HAM radio.

I got a couple baofeng recently, dont have my tech ticket yet. Really enjoy your videos even when I dont know what in the hell your talking about! Thanks

thank you for answering the main question i had within the first minute of the video. male or female. so many videos with just rambling. nice work

I used a lot of different radios In the army, learned how to use them well. HF tac chat and sat comm you name it. Now I’m trying to learn ham. I guess my expectations are too high after using military radios. I want to experiment with long wire antennas like the stuff we used to do in the field. Good video. Maybe I’ll make one if I can figure this stuff out lol

Greetings from Scotland. Gratitude. As a noob. I've learned a lot from this post. 🇺🇸🏴󠁧󠁢󠁳󠁣󠁴󠁿

Great video! I have tried running portables in vehicles before, and with the external antenna it gets out fine, but it always ends up being a chore to remember to charge the radio or whatever. So I like mobiles in vehicles, but for someone just starting out external antennas to a portable is definitely an option.

Good info brother Ape. Adapters cannot be overrated, I have a lot of them....often connections look like I used them all at once...lol

thank you so much, I find all your videos to be quite interesting and of value. You seem to have a vast amount of knowledge on these Chinese handheld brands. Could you do something to show the receivers ability to either accept or reject intermod from most modern electronic devices found in the home. I have quite a few and they seem to be susceptible to intermod. I recently purchased an Icom which has absolutely no internet or intermod reception of routers and whatnot. Thank you for all your videos

This video is awesome I am buying a discone antenna for the house and I have a expendable wit Antenna for mobile use but this video gave me lots of information for my choices

Thank you for the interesting and useful information on the antenna connectors.

Thank you for this video. How do one tell the difference between a fake Nagoya and Diamond antennas vs. the real ones?

Gmrs here. Have the slim duck (on my btech v2) from smiley that seems to do really well and 2” shorter than stock. Just ordered the 771g for my unlocked uv5r that I can switch onto the btech if need be BUT I’ve heard the signal stick, although it’s a ham antenna, actually works great for gmrs. I’d love to hear your input or even see a demonstration before I buy one 😬

I’d like to know what you told your friend about mounting the antenna outside while using the radio inside the car!

bigger the antenna stronger the transmission??? or just improve the reception???

Gosh. I have a 42 inch Abbree antenna that I use quite often and haven't had a problem with it. I also have a magnetic antenna on my vehicles and haven't had problems with them either.

Why do you not want to transmit with the antenna coiled up?

I knew someone in canada ran uv5r off a kush craft 3 beam element

Hello, please be aware that you don't need SMA female antenna, you need non-standard REVERSE SMA FEMALE connector on your antenna. Standard SMA has female with OUTER thread and male with inner thread.

I have a weird issue with my Baofeng radios. I have 2 UV-5RA';s and one UV-5R. Anyway, I've been using them with various rubber duck, Nagoya and even one of those Abbree tape measure antennas for several years now, they all work, but my recent discovery is that when I try to connect the Baofeng's to an outdoor antenna (a discone) I can't hear a thing. I would probably receive more with a safety pin stuck in the antenna jack. The antenna and coax is fine, if I hook it up to my SDR receiver, I have no issues receiving distant repeaters, but I soon as I hook it up to one of the Baofengs, bam, I get nothing. I thought maybe the adapter was bad, but I checked for shorts and found nothing. It's strange. I've read that the UV-5R might have a problem with receiver overloading, but the repeaters I receive are all over 30 miles away, so nothing major when it comes to strong signals. I am not near any other types of transmit towers. I read a couple posts from others having the same issue, but it seems to affect only certain people.

Can anyone tell me what is the advantage of having a SMA to BNC connector? Is it just the quick detachment attachment or is there some signal advantage to be had?

Thank you for making this video. It helps a newbie like me tremendously. I have a question maybe you can help clarify because you moved pretty quick during that part of the video. You showed two SMA female to BNC adapters. You put one on, then put on your signal stick antenna. Then you mentioned the other SMA female to BNC adapters and said "don't get one like this". What is the difference between the two adapters? How can I tell which one provides a strong base and which one will put more stress on the radio?

If i was to put a nogoya on a 20 foot pole outside my trailer/house, and used my UV-52 as a kinda base station inside, would i get better transmit and recpetion with out boosting the signal, and used say the uhf cable or cb cable to run from antenna into my house.

Is there a way to mitigate that overload? I’ve seen people say smaller antenna?

At 2:45, you mentioned a adapter cord or strain relief. That is what I've been looking for. However, I've learned that you want to use the right type coax for the best possible rx and tx. I'm looking for a 3ft coax with sma Male x sma female. Any suggestions on the coax type (RG8X for example).

I don't know what it is with the Baofeng radios I've purchased (2 different models 3 radios in all), but they will only work with the antenna that came with the radio. I've tried 5 different antennas and adapters, and none of these would work. It seems to me that the Baofeng's radio antenna connector may be out of tolerance (?) I could not make any of the 3rd party antennas or adapter to have any kind of signal. It just seems like there's no connection to the antenna.

One of the first things I did for a uv-5r was get the bnc adapters, made testing different antennas so much easier and quicker (especially with 4 HTs that all tend to like different antennas...surprisingly the Nagoya whip and Abree tapes were favored a good deal less than the stock duckies). Any recommendations for a stubby? I'm looking for something that doesn't need to go more than maybe 100ft with clear LOS but still handles the potential overloading/interference issues like you mentioned.

What connector do i need for my antennas to attach to the SMa female to BNC female in order to make quick on/off swaps. TYIA

I have the uv-9r plus it came with a regular antenna which fits fine and a whip antenna that i cant figure out how to get it to fit any help would be appreciated thanks

Great info. Thanks for the video

Can the adapter also give you the ability to run through an amp?

Great info thanks man 👍🏻👊

Is there option for hanging a antenna in a tree for the baofeng? Hoping I could hit a gmrs repeater farther away.

Hey, I got the UV-5R and im looking to upgrade the original antenna that came with mine. The Main purpose of use for my UV-5R is to listen to fire department and police radio frequencies (uhf). My main problem I currently have is receiving signals in certain areas of my city as well as from my home since I live in an urban area, depending on where the units are transmitting from. For example, units calling on the radio from 1-2 Miles away from me I receive almost clear as day, but further out its crackled and very low. Im not to sure how to go about with my upgrade, but all I know is I need something compact (Antenna wise) so I could carry it around with me. Would something like the smaller compact diamond antennas make a larger difference in quality if I upgraded mine to one like that? Thanks in advanced.

Thank you for making this video.

Since I first got my "Ticket" over 30 years ago, I never use the stock antenna that comes with the HT. I've always immediately bought and installed a better, higher gain, third party antenna. For years I used my 1-5 watt HT's in the car/Truck and a good quality roof mounted mag-mount antenna. I always got a clear signal to and from our local repeaters (anything within about 25 miles) and sometimes over much longer distances. The so-called "Rubber Duck" just doesn't do it for me. Unless your within spittin' distance of the repeater, your signal will be so trashie that NO ONE will want to talk to you!

So what is the signal quality of the diamond antenna vs a rubber duck or a more effective antenna?

Do you have a video of “tactical” options to attach to a ruck? Or even through a plate carrier or chest rig? Thanks.

Great and informative, what do you think of the radioditty GD77 radio? I am considering it due to being partially blind.

What antenna should I use for my BF-UV10R

Very interesting!

Nice Video, 0l' SmokinApe I learned some here..........

What dos the bigger antenna do will it give u better range new to this

just got the UV-5R Ⅲ radio and it came with the two rubber duck antennas you mentioned @5:30 is one better than the other?

I have a diamond whip antenna RH771 with SMA male connector. What type of adapter do I need to make it work for baofeng UV-5R? Thanks in Advance.

I have a that radio but I receive a broadcasting from 4 miles away and it is just okay as clear sound as I'm receiving now but the disturbing fact is it has noise I already tried 1-9 sqlc to reduce but it didn't worked. So if I install a long antenna will it reduces the noise??

Diamond Antenna SRH805 Good for boufeng uv 9g? Thx👍👍

Well I live like near a tv broadcast antenna so I guess that’s why I can’t pick shit on my baofeng any suggestions on how to fix that issue I appreciate

Great vid! I’ve seen car windshield antennas but never tried them. I thought I saw a wired one stuck inside the windshield going along to top rear view mirror. Can you recommend them for use with the UV-5R 8W ? If so, what brand & model?

Thanks

Which HT would you recommend as a step up from the UV-5R, but also budget minded? Thanks for the video!

Hello - Can you please specify what a fake nagoya antenna is? I thought I heard you say they work well with the Baofeng - I saw one on ebay for 5.00 - Great video, by the way -

Can anyone explain VHF and UHF? Should I change to UHF or does it switch automatically? I don’t understand it…

Hi! Wich of the two standar antennas is mucj better, the longer or the shorter? Thanks

5:50 is the cheap stub antenna good if you just want very close comms / very low RF?

By using sma to bnc have you tested for spurious emissions from the connections? Curious before i buy

Standard antenna with a counterpoise? Nagoya doesn't compare. My favourite antenna in Australia? ( maybe only Australia) but a uniden 6 dB auto antenna in my sons backpack!

Nice video Ape. Baofengs = real radios lol

Hello, with the tram Antenna connect to baofeng would it be less stress with SMA F to BNC adaptor or using SMA female wire to UHF Female? Also what the best way to place left over coax cable for the magnetic antenna?

Hello i got my license a while ago and i just use the baofeng uv82 when we are with my friends in the woods hiking or offroading and i just want to know which band is better for communication in the woods with my friend and which antenna should i buy could u please help me ?

Can you swap antennas on the baofeng BF-88e ??

1:32 Yaesu has an sma female while the baofeng has sma male? Hypothetically speaking here... Could you connect them? Knowing damn well myself there is no good reason to do this, and yet... I gotta know!

Mine is hooked to truck or inside apartment with mobile antenna. Best

Is there an SMA non-binary transgender antenna option?

Hi.. I'm only a GRMS licensee, but I'm wondering about the Diamond antenna.. Does it work better than the longer Nyegoya or however you spell it antenna? Thanks in advance.. I have a couple TIDRadios and a beufeng GM15 pro for GRMS and repeaters.. I might get my ham license though as I want to play on the HF frequencies I think in the future and may learn morse code, even though I realize it's not required. Thanks in advance and regards from the heartland. South Central Indiana. USA Tim

Great channel, just subbed. I have a question...is there a maximum length of coax cable I can run between my uv5r and an antenna? Id like to put the flexible slim jim(?) antenna on my roof and have my radio about 15 feet down from there in my office

Have you tried your speaker wire antenna on a UV-5R?

I've been interested in ham for a little while now. Would consider getting licensed even. Got a good deal on baofeng gt-3tp markiii radio. I believe I've figured out how to program it. Thought it would be fun to monitor the waves. Now the problem, I don't have a repeater within 10 miles of me at best here in Indiana. NOAA and static is about all I've found. So I'm into this for about $40 and loosing interest fast. What might be some recommendations IF I decide to proceed with this hobby?

are the diamond antennas any good for this radio ?

or do what I do relieve the stress.. put radio flat

Hey smokin. I checked your amazon list and didn't see the tram antenna in there i want to get one. Just don't want a counterfeit one.

Thank you sir...!

I noticed you responded to my tongue-in-check question on another guys video where he claimed the radio "had to be on to program it"... Thanks...that was a joke. Anyhow, I am trying to find a use for my radios beyond discussions that start and end with "can you hear me and how far away are you?". I use an aviation band radio for my hobby and have used the 5 FCC "carve out" frequencies granted to the USHPA for paragliding instruction and paragliding air to air comms. Beyond that, can you point me in the direction where I can learn (excluding emergency use) how Ham is useful? I understand how repeaters work, of course I've monitored Wx broadcasts and I understand the utility of 2M in a post apocalyptic world where we warn each other about roading bands of zombies, but scanning gives me zero reassurance that the effort to persist learning about or acquiring radio, is worth the time for the average armchair enthusiast. There has to be usefulness beyond a "can you hear me now?" conversation. No?

Where can I purchase that silver wire adapter you showed in the video - the one that reduces stress when connecting my mag antenna on my vehicle rooof to the Baofeng?

The real diamond short antenna is hard to find.

I have a Satcom PRT47s Antenna ... works wonders on a Baofeng. 5.2db Gain Cheers !

WHERE CAN I GET THESE ADAPTERS ? ANYONE IN THE US SELL THEM ?

Do you know any good mini vhf sma female antenna up to 100mm length?

Can I tell me what that sma female to whatever it was that u said it can protect the base of the antenna radio

What do you think about the 42.5 in. Abbree antenna? Is there a good way to add support for it?

If there is anyone that lost the rubber ring for the Nagoya or it wobbles even with the ring? I have designed a little 3D printed spacer that replaces the rubber ring and it will completely eliminate the wobble!

does overloading a radio risk damage to the radio?

Do you know what frequency gets the best signal strength on the uv5r stock antenna?

nice vid ill try to explain what im asking do to im in greece so i leave in a house i got 2 UV-5r when i trasmit lets say to my wife i have about 3km range and thats when i can see that far with some houses in front the uv-5r,s come with the ruber ant with the ball tip if i buy a original dimond for them what will be the def in RT TX . thank you for your vid

Do you have a recommendation for railroad

Personally, I view the antenna as the best "amplifier" suited to the radio it was designed for....these are compact things, putting a 1 meter antenna on it may not be good for them...

Hey bud I recently purchased a baofeng I ordered the uv-5r and I got a. BF-F8TD instead what is the difference between the two I haven't been able to find out any information on that model do u know anything about it as far as the difference between the two? Thanks .

Is it ok to trim the Nagoya na771 antenna

Any updates to this topic for the F8HP ?

God stuff, thank you!

I have the Abbree ar-771and it sux

I doubt you'll answer nobody does but... The fake diamond... Why stay away from it? Asking cause my baofeng I just ordered comes with one. (As an extra)

So on a baofeng uv-5r do you run the Nagoya and the ugly stick antenna

are the antenna male or female for the uv-5r

Strong signal or Deef as a post. I deal with DC receivers with my home made ham radios. Some nozy Parker ham night hear my local oscillator. And set near by to listen in then my rig goes as Deef as a post. For hetrodine. No body wins. Hi hi De kv4li

NO spoilerxD Mucha información sobre uv-5r y más aquí solo en español: youtube.com/@javierkreiber