Have Makita Made The Ultimate Multitool?

Рет қаралды 1,326,028

2 жыл бұрын

Head to www.squarespace.com/scottbrow... to save 10% off your first purchase of a website or domain.
Music by Gurtybeats / gurtybeats
BUY SBC MERCH HERE
sbc-store.creator-spring.com/
You can support SBC on Patreon - www.patreon.com/user?u=16545763
Donate here if you would like to help the channel - www.paypal.com/cgi-bin/webscr...
I'M ON INSTAGRAM scottbrownc...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Work Wear
Work Pants euroworkweardirect.com.au/col...
Vest euroworkweardirect.com.au/pro...
Kneepads euroworkweardirect.com.au/col...
Belt euroworkweardirect.com.au/col...
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
SEND STUFF HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this KZfaq channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrowncarpentry.com/d...

Пікірлер: 1 500

@mikeevans6589 2 жыл бұрын

The conversation with the wife is classic as it takes the form of every conversation a man has brought to his wife to try and justify spending money on another tool. 🤣🤣🤣

@MrJruta 2 жыл бұрын

Haha exactly that! 😂

@Wazziish 2 жыл бұрын

Haha, i know. Me and my girlfriend bought a renovation project house and she thought i could do everything with a saw and a hammer. Been trying to justify my purchases ever since. Its been almost 3 years now and she still questions my purchases even tho i do everything from plumbing, tiles, electricity and so on :)

@london_roubenl Жыл бұрын

Had a few convos like that myself, with the wife

@jonneymendoza Жыл бұрын

Thats basically every conversation with the missus no matter the item..

@kelvindawe5123 3 ай бұрын

They spend more cash on a stuppid hair trim than I payed on my impact drill and they justify that easily 😂😂😂😂

@johnbowen5336 2 жыл бұрын

It's encouraging to see someone understand where the condiments go on a burger.

@niekbeentjes8849 2 жыл бұрын

But doesnt toast the buns ... :(

@jamesdebesse5147 2 жыл бұрын

An underated skill

@adammacer 2 жыл бұрын

I felt the lettuce should've been on top of the burger.. though I guess lettuce isn't technically a condiment..

@Syncop8rNZ 2 жыл бұрын

@@adammacer A bed of lettuce... it goes on the bottom.

@adammacer 2 жыл бұрын

@@Syncop8rNZ I prefer a duvet of lettuce, on the firm mattress of burger..

@ukmerkz5031 10 ай бұрын

Upgraded from an older 18v kit. kzfaq.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

@1bgrant 2 жыл бұрын

I’m an apprentice electrician and I just had a DTM52 sent out from Mitre10 during the lockdown. Already used it for some home DIY while I’m stuck at home. But as a sparky I can already tell this is going to be a game changer. Also great to see some local content on the Tube. (Also from Auckland) 🤙

@a4andre559 2 жыл бұрын

"Lock-down Scott Brown here" set me off. That was gold and I couldn't stop laughing.

@abdcontractingltd 2 жыл бұрын

Just got this in Canada and I absolutely love it over the old one. I love the fact like you said about the 3 Starlock types. It's a great idea, the vibration control is great too

@62Cristoforo 2 жыл бұрын

Are you in Toronto?

@WilliamJaeggiJr 2 жыл бұрын

I've been watching content on your channel for a little over a year now, and I greatly appreciate how thorough you are with product (tool) reviews. Keep doing what you do, and thank you for all the great info and knowledge you pass on.

@rebelliousgoat1557 Жыл бұрын

Thanks man appreciate it.

@randynovick7972 2 жыл бұрын

I also am in the Makita system, but I held off on their multi-tool. I may rethink that now... and may also consider getting an extra pin to tape to the inside of my toolbox lid. :) Many thanks.

@tonygorton1874 2 жыл бұрын

I watched this video at least 4 times, classic episode “well I’m glad you asked” 😂

@agalleyne 2 жыл бұрын

You + Jess = relationship goals! Not only is she kind enough to make lunch for you (with extra cheese), she allows you to have tools in the bedroom? Wow.

@Mymindisablank 2 жыл бұрын

It's a sad state of affairs when there are tools in the bedroom.

@mrvincefox 2 жыл бұрын

It vibrates. Perfect for bedroom multi use

@Mymindisablank 2 жыл бұрын

Did you forget the dishwasher after use requirements?

@TheBBQGamer 2 жыл бұрын

@@mrvincefox haha

@AlexRides808 2 жыл бұрын

Allows? Damn. Just damn.

@mauriciohzamora4105 2 жыл бұрын

One of the best reviews I've seen in a long time. Informative, addictive, and fun. Kudos!!!

@glynjones6463 2 жыл бұрын

I'm so glad to see another person taking the time and effort to learn as much as possible about the way the tools work and not just a person who buys it and uses it and doesn't have a clue why things break down when they are misusing it all the time. A lot of people know what they are doing and I'm not making a point for those people..just the ones who use a battery drill for instance and put it down in a puddle because they heard someone say it was waterproof...And he did that to everything he had when he emptied his tool chest onto the floor outside in the rain all day ...And wondered why he kept saying Makita are rubbish as he said everything keeps breaking

@sruss9114 2 жыл бұрын

This was absolutely priceless! Thanks to you and Jess for making life in lockdown much more informative and entertaining. Greetings from Karaka.

@paulgreene9997 2 жыл бұрын

That tool explanation with Jess was funny - she looked like she was trying hard to feign interest in what you were talking about - personally, I couldn't stop looking at those burgers. lol

@DarkMarkison 2 жыл бұрын

lmao

@seancarey8731 2 жыл бұрын

love your blogs as a retired builder you teaching me some new tricks, thanks mate it helps fill the long lockdown here in Auckland, ps love the burgers

@buddybear3120 2 жыл бұрын

The whole time watching this, I thought that pin is just an added unnecessary extra, and easily lost . You proved me right at the end. I really like dewalts clip on system.

@michaeldavid2320 2 жыл бұрын

When the pin was revealed I immediately thought 'Going to need to get 1 or 2 spares of the pin.'

@TheBobdelicous 2 жыл бұрын

I agree but I have never lost the pin on my gen2 makita multi tool. I envy the the ease of use of my dewalt cohorts though. Do you like the adjustle power trigger thing on the dewalt or the idea of the makita on/off better?

@krazzygranny7032 2 жыл бұрын

i have the dewalt battery multi tool with that "easy" blade install, sometimes at least on mine which is not even a year old, it gets tough to actually push it hard enough to open the jaws, and don't even get me started on trying to get that blade perfectly centered

@alandrummond1842 2 жыл бұрын

Not much different than changing a disc on a battery grinder haven’t lost the collar on that yet touch wood

@robertrada4783 2 жыл бұрын

The immediate predecessor to starlock (in Fein world) was a pin system. I have found it to be better than the pinless starlock system when trying to set the angle of the blade in a tight spot.

@trevorm7013 2 жыл бұрын

You talking to Jess while having lunch killed me😂

@jaredbrierley2782 2 жыл бұрын

As soon as me and the work mates turned on that new Makita multitool we all looked at each other and couldn't believe how quiet it is. I upgraded straight away. Did a comparison of decibels between the old and new and there is 10db different which is a lot. Great video Scott!

@throttlebottle5906 2 жыл бұрын

it's often the material you're cutting that starts ringing and screaming far louder than the tool.

@jaredbrierley2782 2 жыл бұрын

@@throttlebottle5906 100% the material makes half the noise but its a good start the tools way quieter.

@throttlebottle5906 2 жыл бұрын

@@jaredbrierley2782 ever used one of those tool on a sheet of plywood or any large less dense surface? say a particle board cabinet(bae or wall), further that by plywood, particle board, and others? they're more or less a "speaker cone" for the tool and total degree of movement and tool noise becomes nullified by the giant speaker screaming :)

@lilbrowny105 2 жыл бұрын

"I'm glad you asked". Wish my missus had as much patience as Jess when I talk about tools :')

@LDeezy662 2 жыл бұрын

That shot with all the blades and tools in your hands and dropping blades as you walk is soooooo relatable 😂😂😂

@bwillan 2 жыл бұрын

Awesome to have Jess (I think), a non tool user, to help with the video. She provided some comic relief and obvious question insight. LOL

@morfitts5732 2 жыл бұрын

dewalt system seems so much easier to use I've had mine 2 years and never had a problem and got me out of alot of hard work

@alexmcandrew8370 2 жыл бұрын

Whilst watching I was thinking of making this same comment. No additional fasteners with the DeWalt. Pull handle, slide blade in / out, release handle. Easy.

@LukeSMK 2 жыл бұрын

Can only use one type of blade though

@alexmcandrew8370 2 жыл бұрын

@@LukeSMK The system is well supported with a bunch of different blade styles and a few brands manufacturing the system. Only having the one fitment option has never been a problem for me.

@hozlopez 2 жыл бұрын

J make check. Dewalt. Im locked on the batteries with them.

@timcorbett9629 2 жыл бұрын

Yeah, I run the DeWalt as well. Cheap, easy, convenient, good accessories, cordless. No pin or bolt to lose.

@whatbass 2 жыл бұрын

This is good Scott, we like technical details, the most interesting part of this video, for me, was the difference in movement for each model. Keep coming with the details!

@Bushrookie820 2 жыл бұрын

No this is lock down Scott

@dougdownunder5622 Жыл бұрын

Hey Scott. Thanks mate from Stray Ya. Retired Ind Arts teacher here and have never used a multi-tool. I am on the Makita cordless path and want to do some tricky remodel of a pantry to a butler pantry. Tradesman said use a multi-tool. Multi-tool??Which started the?????. You answered all but 1 question I have and answered many I didn't know enough to ask. You have a natural teaching ability, concise, examples, comparisons, humour. Production quality very nice. I was on my way to the tool store but then read the comments about pin failures. grrrrr. Thanks.

@frameriteairdrie578 2 жыл бұрын

That burger looks spectacular! Need a second channel: *"Jess Brown Cooking"* .

@TinyAcresFarmHome 2 жыл бұрын

Scott, this is exactly how i talk to my wife and that is how she responds just like jess. Holy crap i was laughing

@BlueZirnitra 2 жыл бұрын

Body language was screaming "I really don't care lmao but I'll play along because I love ya".

@jamiesaad8272 2 жыл бұрын

Loved this episode, found it funny and well made. Thanks for the tips and insight on the 3-4 tools mentioned. I personally think the Milwaukee 12v multi tool with the Milwaukee blade it comes with is one of the best I've ever used, don't know about the starlock function, but it doesn't bother me when it cuts so well.. keep up the awesome vids 🤟

@davidgendron1953 2 жыл бұрын

I bought a Fein brand multi tools and man that the best one I’ve used so far, never used the makita and/or festool! The Fein is awesome it has a great sanding attachment and decent dust collection!!

@joes.2111 2 жыл бұрын

Fein is still the gold standard in my opinion. I have a Fein multimaster and a Festool. The Festool is a Fein supercut with Festool branding on it. They have a deal together. But yes, I tell everyone they don't understand what is a good multi-tool until they use a Fein.

@worstdayofmylifesofar.just7477 2 жыл бұрын

I had the fein multimaster. It was very smooth and just nice to use, wway Less vibration than any other one I've seen. But one day it broke inside, because to keep vibration down the head is only attached to the motor by very small glass filled plastic arms. I had it maybe 5 years. Looking inside it seems to me this will happen to everyone eventually. So I bought a cordless Milwaukee and it is just as good or even better. Very smooth, has a light and definitely cuts quicker. One of Milwaukee's better tools!

@davidgendron1953 2 жыл бұрын

@@worstdayofmylifesofar.just7477 the cordless Milwaukee is what we use at work and it is a piece of junk IMO and in the opinion of everyone using it, pain to change tools, vibrate like crazy etc etc !

@JohnnyG2573 2 жыл бұрын

Jess needs a channel - that burger looked so delicious!!!

@richardcapey-wade8191 2 жыл бұрын

Got the Fein cordless 500 , it's great, I always have it in the van, but don't like using it for long due to the vibration (which is low compared to other brands) but it's essential for some small tasks, love it when I need it. Cheers

@balokurd17 2 жыл бұрын

Well, noone likes to use multitools, they suck at everything they do but They're not replaceable

@tundrawhisperer4821 2 жыл бұрын

Have you ever had the chance to compare the Fein cordless to this new Makita? Was about to buy the Fein cordless, until Makita came out with this brushless motor. May go with the Makita now. People are saying good things about it’s power and very low vibration.

@tundrawhisperer4821 2 жыл бұрын

@Biggest Dongle yeah, I do like the Fein multi tool! 👍🏻

@ParisCarpentry1971 2 жыл бұрын

Hey Scott, great video reviewing this new multi tool from Makita and also explaining the difference between all 3 starlocks. I was definitely sold on those burgers though! 👍👍👍

@RPmusic06 2 жыл бұрын

Fun fact about the new makita multitool, the motor is in a housing inside the tool, the housing has springs around it and that is why it vibrates less and also that is a reason why it makes less noise. Bte nice video Scott always love it bud!!!!👌👌

@mycoolcar 2 жыл бұрын

I’d be interested to see if the larger head on the body of the new Makita gets in the way at all. Often you’ll be multi-tooling in an awkward or cramped space, the larger body head may cause issues.

@iplayoldschoolrunescape 2 жыл бұрын

he just made a valid point lol, look at the other multi tools theyre way slimmer than the new chode

@robertrada4783 2 жыл бұрын

That is definitely a valid concern. The solution to that may be to use the longer and overall larger Starlock max blades. I get why they designed it like that. Everything was squished to the business end and then the handle is decoupled from the body. With the cordless Fein/Festool models, you have to hold the tool all the way back at the battery to avoid the vibration.

@ivicajanco9921 2 жыл бұрын

I just came to comment this

@wearsjorge55 2 жыл бұрын

My mate bought one, only found the size of the head to be a problem when it came to visibility in small spaces, seeing what im cutting

@HandymanTim 2 жыл бұрын

Most likely shaped that way to reduce the vibration

@jamiehobbs8746 2 жыл бұрын

I had this multitool for not even two weeks when something in the pin locking mechanism snapped off and made the tool unusable, i took it apart to see that the part was designed nowhere near as strong as it should have been considering the torque put on the part with the leaver which im guessing is what made mine give out. I sent it to makita to repair and ive been told that so many people have already been having the same problem so makita are having to redesign the part itself. And I can confirm the larger head does get in the way at times unlike others like the feintool that i had been using previously

@graemeb7988 2 жыл бұрын

Had mine a week, same thing. Was repair and back to me in 5 days. Great tool tho..

@maimaibiri9045 2 жыл бұрын

@@graemeb7988 Oof damn, inside? wjhere you have to send it somewhere to repair, thats a no go then.

@bryanttan6639 2 жыл бұрын

My one doesn't work after 5-9 time of using it... Can not take the pin out...

@solmanJapan 2 жыл бұрын

After many years of struggling I finally picked up a Makita dtm52-something and jumped on the starlock bandwagon. Bit fiddly withe the pin but the tool is pretty light, and gets the job done for a reasonable price. Would be good if the next version reorients the battery like the Bosch tool.

@LamentationStudio 2 жыл бұрын

I just went with the Festool for simplicity's sake, and I hate losing pins (which happens with other tools or gear that depends on something like that). Thanks for the video as usual!

@seanpaul8614 Жыл бұрын

someone has money haha

@jackhawkpiper97 2 жыл бұрын

That's a beauty of burger; well done, Chef Jess!

@daveperkins2927 2 жыл бұрын

The Dewalt quick release mechanism on their multi tool is awesome. Great review as usual. 👍👍

@darylsavage119 2 жыл бұрын

Personally it's the variable speed trigger control that dewalt have that I like about them. My go to multitool over the apprentices dewalt and my 18v makita tho Is my m12 milwaukee. Quietest, just as strong as both 18v and less vibrating

@jakejohnson_ 2 жыл бұрын

100% agree you get the quick change lever, can adjust blade to 90 degrees quickly but still use the cheaper blades.

@orran8281 2 жыл бұрын

They burn out to easy

@krazzygranny7032 2 жыл бұрын

i've found it hard to get those blades to be at an absolute straight 0 degree mine always is slightly off to the left or right, especially with cheap blades but even the most expensive ones it still doesn't fit perfectly straight, and at times getting my jaw to open and release the blade becomes a hassle

@ppaulsanderson 2 жыл бұрын

@@orran8281 found exactly the same

@dodsg 2 жыл бұрын

My fairly old Fein multitool (maybe 15 years) has a pin and lever mechanism too. Bit fiddly but works with all the blades I've thrown at it.

@LiamHoganDrums 2 жыл бұрын

My favourite tool change system on a Multi-tool is actually on a Ryobi! It uses the classic OIS blades, BUT instead of a bolt that you manually have to screw and unscrew every time, the bottom bolt is attached to a sprung lever which opens up enough gap to change the blade... I.e similar to your new Makita except the bolt is fixed in place so you don't have to take it out every time (and you can't lose it!). That's not even the best feature though... The entire tool head is also on an adjustable pivot so the blade can be up to 90˚ from the body which makes it super handy to get in tight spots.

@xenonram 2 жыл бұрын

So you have to use the blades with the split on the ring, to get around the bolt, right?

@LiamHoganDrums 2 жыл бұрын

@@xenonram ideally, yes as it makes changing them quicker. But the top of the bolt also comes off if you want to use the full ring blades.

@mikefisher9992 2 жыл бұрын

Informative video Scott, by the way it looks like Jess makes a real mean burger!

@ackec-umsekkruch-ekucki952 2 жыл бұрын

Hey Scott, thanks for the very in-depth analysis it was very informative. All 3 brands you mentioned love it when we buy multiple of the same tool from different manufacturers - there's always the chance you'll convert, right! And you should enjoy your tools because they're awesome and sometimes the main reason we carry on doing the hard work. One thing I've learned though over the years is a tool is just an extension of our hands. My grandad was a very respected carpenter and he only had the axe, the circular saw and the handsaw. He could basically jump on a bus to get to work. And he managed just fine all his life. Just a thought for us all to consider. I still love my extensive range of Makitas and I wouldn't swap that for the bare necessities. We're just very spoiled nowadays. Have a great weekend!

@poppacore6433 2 жыл бұрын

You have just taught me about oscillation angle, Scooter. Appreciate the lesson, brother.

@obeddiaz7 2 жыл бұрын

The same happen to me when I explain woodworking things to my wife. Really nice explanation, I wish I had multitools available in my country.

@Mikael-jt1hk Ай бұрын

Ever hear of amazon? 😂

@AntonT 2 жыл бұрын

I like how Makita placed the motor near the spindle, and the whole inside structure mounted on a vibration dempfer. Now I own TM30 (12v) Makita with allan key and DTM51 (18V) , but prefer twice less powerful 12v model due to small size :)

@pflaffik 2 жыл бұрын

Some like their smaller tool, but usually its not because they have a choice.

@thegr8pigshagger 2 жыл бұрын

Fein had the same pin idear about 8 years ago. The pin used to wear out quick so you could no longer keep the blade tight

@thorstenkrieger6289 2 жыл бұрын

Fein invented the Multitool back in the sixties and the Starlock system was an collaboration of Bosch AND Fein. Fein is often overseen, although they are the oldest German tool company and invented for example the first powerdrill ever! As far as I know is the Festool multitool also manufactered by Fein. I don‘t know the Makita multitool yet, but the anti vibration system of the Fein I owned is outstanding!

@CipherNL 2 жыл бұрын

My WORX Sonicrafter has it too. It's called Hyperlock and it used to accept all types of blades. But I don't think the Starlock-types fit.

@wearsjorge55 2 жыл бұрын

My old bosses fein multitool was incredible. So much power and speed it was a pleasure to use.

@ScottBrownCarpentry 2 жыл бұрын

I didn't know that. It will be interesting to see how the Makita goes over time.

@ScottBrownCarpentry 2 жыл бұрын

@@thorstenkrieger6289 that's awesome. I've only tried the Fein a handful of times and was impressed. Both Kameron and Gaston have one and they love it. I didn't know they went that far back. Cheers

@timmymartin317 2 жыл бұрын

Great coverage with a bit of comedy to boot. Keep up the good work!

@craiglee795 2 жыл бұрын

I've had a corded Bosh for 5+ years hanging around the garage for home projects. I now have a cordless Makita that I use frequently as a career handyman. The thing I love about the Bosh pinless is when you are sanding with it. Each time you change grit size on the Makita you have to pull the paper off to get the pin out. That often leads to the backing failing on the paper before the grit is worn out. On the Bosh you can can just buy a 2nd (or 3rd) sanding plate and keep the paper intact as the clip couples & uncouples behind the paper surface.

@ScottBrownCarpentry 2 жыл бұрын

Ahh, good point!

@DeCSSData 6 ай бұрын

I made a hole in the paper just to get arround that... but it tends to collect dust up arround the pin if you do so.

@22kmclaren 2 жыл бұрын

Losing the pin was back of my mind through the whole video. I feel like Makita missed the chance to include a second hole or a magnet for storing the pin during blade changes. You could test the concept, use hot glue or something else temporary to put a strong magnet somewhere on the tool. New blade change order of operations would be: pull pin, store pin on magnet, change blade, reinsert pin. If it works, drill a hole into the plastic body and epoxy a magnet, so it is flush and permanent.

@hustla818 Жыл бұрын

If you're dumb enough to lose a pin DURING a blade change than you shouldn't be messing around with tools

@22kmclaren Жыл бұрын

@@hustla818 Or I am an engineer who has had to fix much more complicated tools/systems when other people's bad luck or momentary lapse in judgement causes non-tethered or non-secured parts to go missing. Go back to your cave troll.

@hustla818 Жыл бұрын

@Kyle McLaren ok but it doesn't just disappear from the face of the earth. If you "lose" it somehow during the 3 seconds of changing the blade, just look around for 10 seconds and I'm sure you'll find it again. It has to be in your immediate vicinity. And you're an "engineer" who fixes tools when the owner loses a part? There is nothing to fix, you just buy the part that you lost. And you don't need an engineer to fix something so simple. You're the only troll here you're no engineer, you're probably a janitor or some other basic ass job. You're telling me if I lose this pin on the multi tool I'll need to hire an engineer to fix it? Or do I just buy a new one and put it back in. Gtfo you loser

@22kmclaren Жыл бұрын

@@hustla818 In a large enough commercial setting, dropped parts can essentially disappear. And with downtime costing tens or hundreds of thousands of dollars, you can't wait to "just buy the part". Especially for old machines where the manufacturer went out of business, or plans and technical manuals aren't available. Obviously a pin isn't lost forever if it is dropped in a smaller workplace like home construction. But my work background influences the way I think, and to me, unsecured parts and tools are hazards. I come to Scott's channel for the mellow vibes. It's sort of weird to see someone getting so defensive and accusatory in the comments, especially on a 1 year old video. Normally good people like Scott have fewer trolls int he comments. Are you okay? Do you need help?

@okafka5446 2 жыл бұрын

Fein AMM 700 - no pin, and every starlock blade including Max.

@tsc2470 2 жыл бұрын

i use also Fein MM700 and AMM700 and there is no comparsion to others , except to festool as i heard, and also Fein is the original inventor of these multi tools.

@okafka5446 2 жыл бұрын

@@tsc2470 It looks like N.Z. Australia and America haven't heard about Fein.

@bilbobeutlin1705 2 жыл бұрын

@@tsc2470 As far as i know Festool collaborated with Fein to make their own Multitool.

@clearcut6818 2 жыл бұрын

Love it when your husband brings his tool on to the dining table, along with its accessories.

@markhedquist9597 2 жыл бұрын

Makita has certainly done a good thing with this new oscillator. I would say it's an all around winner. It will be a little painful to let loose the money, but I know I will be happy with it. One thing, they really have down to a science the order and pace of releasing new tools. They get you to keep buying upgraded models on a regular basis. Being a bona fide tool nut is quite expensive. I like it, though. Thanks for the video, man. Nice job on really laying out the nuances of the different models/brands.

@ktaragorn 2 жыл бұрын

Thank god Scott isn't in Teaching.. That burger is making me hungry.. just eat it already :D

@thehammerinc6072 2 жыл бұрын

I Won’t lie Scott, I look up to you and Jess! You guys are amazing! I’m from Canada and our building practice and codes are very similar! And I’ve been following your practice for a while now Scott! You’ve thought me a lot and recommend a lot of tools and practice I use on the daily bases. Thank you

@mohedaicebear 2 жыл бұрын

that's my perfect date. a quality meal and explaining tools and why I bought them lol

@kazihossain1370 Жыл бұрын

Thanks bro, I just used this makita multitool to chisel some door frame and install security locks and I bought it because of your video. Install was a breeze and it cuts clean. I do need a new blade though because I thought it would do metal too but it does not haha

@throttlebottle5906 2 жыл бұрын

makita had the pin on the version in between those two, seems like they've just retained that for simplicity and multi-blade capability

@346jan 2 жыл бұрын

i know this is probably blasphemy to say, but i think the ryobi multi-tool is actually one of the best. Quick release blade, and not only can you rotate the blade position, but you can also pivot the head in a number of different ways. Great for work in tight spaces

@davidodonovan4982 2 жыл бұрын

DeWalt have absolutely nailed the quick blade change mechanism on a multitool, simplicity in itself, when it comes to multi tools DeWalt have quick blade changes cracked, with a simple spring and lever mechanism. No manufacturer Bosch, Makita Worx, None of them come close to DeWalt. kzfaq.info/get/bejne/jdukaZZ12KyvZI0.html

@AGfrom83 2 жыл бұрын

Have ryobi got better batteries these days? I had a couple of ryobi tools and the battery really put me off the brand. But to be fair this was a long long time ago

@aurinkonz 2 жыл бұрын

I am a sparky. I would stick with the brands like Makita Hitachi, Milwaukee or Dewalt. Ozito, Ryobi, Black and Decker, and Stanley could last for only a few months of intensive usage. I have both Dewalt and Makita tools. People on site would argue about which brand was better. I would always say that people with big hands and stronger arms should go for dewalt, smaller hands people would be benefited from the makita’s ergonomic grip design.

@tokenjay 2 жыл бұрын

Came in thinking the ultimate multitool would be like the last power tool i needed. But it seems the multitool only has one function…. Great video as always loved the dropped clanging attachments bit.

@samnass Жыл бұрын

It can cut, trim, scrape, sand and remove grout, depending on the blade you use...

@Brighton939 2 жыл бұрын

Great vid. Thanks for taking the time for putting this and all your other vids together. I've just bought the Makita (DTM50Z) the non pin version. I'm an ex landscaper and now a handyman and never really needed one of these. I have an awkward kitchen job coming up that gave me a bit of head scratching of how to do it. Multitool was the answer. Once I bought the tool the tricky bit is finding the correct blades to do the job. There are blades that fit it but some don't!! The blades....this is the crutch.....The reviews on some blades I read are rubbish. (I'm in the UK) BOSCH blades have the best reviews but are super expensive...even the crappy ones are dear. Makita don't do blades. Is this just a UK thing? Love Makita and have bought into their cordless tech. Why on earth don't they make them? If I was ruler of the world I would do many great things, quite low on my list of amazing things to do (world saving wise) would be to get Makita/Bosch/Festool/DeWalt etc to sit in one room and say, as ruler of the world you understand ...... 'These good people are trying to build amazing things, they are trying to change the world and make it a better place. You need to stop faffing around with coming up with different attachment heads that suit your brand..I order you (in a kind way) to all have the same attatchment configurations, be friends and work together'. This would mean our friendly store owner isn't googling what sort to tool you have so he or she can match up the correct blade to your multi tool and this also stops grumbling in the queue when all they want to buy is some silicon. The top brands should compete on how their blades perform not on the multiple ways to attach it.

@tippo5341 2 жыл бұрын

Ah the lock down edition...I'm feeling the pain from Sydney...great video by the way, looking at getting a multi tool in the near future...think I'm sold 😁😁😁😁 and if Jess ever gives up the day job...she could go into making burgers...looked delish!!!! Cheers to locoked down Auckland from locked down Sydney across the ditch!!!!!

@scottfaichney1591 2 жыл бұрын

Still think the DeWalt multi has the best blade change system out of all the major brands. So quick!

@jackshen9235 2 жыл бұрын

I was watching this video just thinking thank God I have a Dewalt one so easy-to-use.....

@Patrick-857 2 жыл бұрын

It's a bloody awful tool though. It vibrates, it wears plastic off where ot contacts your batteries and wrecks your batteries too, it gets really hot on the handle, it's not ergonomic, and the trigger wears out so you can't get a constant speed anymore. Triggers on multi tools are bad. They should have a switch and a variable speed dial like practically everyone else. I hate mine and I'm going to get a different brand one soon.

@markjordan5751 2 жыл бұрын

rockwell makes the best vibrator tool.i prefer over dewalt metabo bouschect triied many

@Griesinho Жыл бұрын

Awesome video - thx a lot here from Germany :) I'm into the Makita family and want to expand my range with a multitool. And now I know that I'll be going with the DTM 52

@jovosedlar3395 Жыл бұрын

Brother the seen at the table is priceless! I saw myself doing the same at my home. Hello to all the construction people in NZ from a Serb.

@effervescence5664 2 жыл бұрын

As much as I like the star lock blades being "only use this blade for a high power tool" I find the dewalt system with the standard blades and the spring clamp much quicker and generally just as good. However to me a blade is a consumable and I'm not worried about having to replace them at any point.

@keatonmills4800 2 жыл бұрын

The dewalt is by far my favorite, I’ve used them all extensively as I work for a large commercial contractor. The dewalt is the most comfortable in my opinion they also has the pin it’s just a screw

@IvanR3 2 жыл бұрын

I have also the Bosch one and I figured out that you just need to widen the hole with a dremel and the STARLOCK MAX blades will fit in the PLUS one 😁. cheers from Austria

@TheUltimatePride 2 жыл бұрын

I've done the same before for my Fein but just used a slightly larger drill bit

@jim-nicolroseberry7894 2 жыл бұрын

Same lever and pin type blade retention as my 15 year old corded Fien multimaster. Still works great!

@russellkeys 2 жыл бұрын

Great system with the Pin. I have the Ryobi which has a quick lock. Also pretty good.

@JelathO 2 жыл бұрын

The recent DeWalt ones have a nice system but I have no clue if they use starlock. The system itself is great though.

@41DegreesSouth 2 жыл бұрын

The Dewalt can use all of them, they include an adapter for starlock blades. They shine with the open back blades though, you just pull the trigger lock and slip it in. So easy.

@daves4026 2 жыл бұрын

I have the dewalt it’s good as long as you have the strength to push the spring lever. And consumables are cheaper than star lock. There is also Bosch star lock for angle grinders

@default9740 2 жыл бұрын

Yep, another vote for the Dewalt system, super fast, especially if you’re changing angles a lot to get a cut right.

@TheKuma38 2 жыл бұрын

Yeah I have to agree I have a Makita Renovator at but used a mates DeWalt Renovator and thought his was a lot better. easier blade change plus it had a LED

@macvos 2 жыл бұрын

@@daves4026 that's X-Lock. Great system that Makita also started using

@69PlzBitch 2 жыл бұрын

Forget about the damn multitool, I'm more interested in that burger!

@lewisglennie 2 жыл бұрын

Was contemplating buying the new makita, and you have just cemented my choice. Thankyou very much

@aronvo 2 жыл бұрын

Well done video. You have a talent, other than your profession, and it's sharing your knowledge with others. Hats of to you good sir.

@Thekitty0706fan 2 жыл бұрын

Never understood the pin in the makita, even less now that they use a Starlock system. I work in a hardware store where we have demo machines of the multi-tool on display and on both the screw has been stolen because people lose it. Bosch and Fein do it better with just the click system. I guess DeWalt has a similar thing where you thread it on from the side but you are limited to just their blades that have the slit in the back

@GermanClimaxClan 2 жыл бұрын

there are 2 different patents. they just bout the usage of the Star-form. Not the fast fix function

@KriegerDelfin24 2 жыл бұрын

@@GermanClimaxClan Bosch and Fein developed the Starlock system together. by the way bosch also developed the X-lock system. And Fein will be using Bosch 18V system soon.

@mfx1 2 жыл бұрын

I've used a Fein that used a similar pin system.

@GermanClimaxClan 2 жыл бұрын

@@KriegerDelfin24 yesterday i read a lot of this topic. seems like thats the "solution" of making 3 types of blades compatible.

@henryk1031 2 жыл бұрын

all’s I know all the common blades fit my dewalt

@Mymindisablank 2 жыл бұрын

I just recently bought the Bosch after owning the corded Fein old style, the only issue I have the with the Bosch is the variable speed adjustment is that on occasion I brush the palm of my hand against it and it engages warp speed.

@macvos 2 жыл бұрын

How does the vibration compare? Fein is really known for great vibration control. I like the Bosch, but don't want to have extra vibration compared to the corded Fein I have. How are your experiences?

@Mymindisablank 2 жыл бұрын

@@macvos From memory the Fein is a really noisy SOB I have to wear my earmuffs when i use it and the vibration is full on. The Bosch is quiet in noise and vibration in comparisons, a pleasure to use and of course with no cable a greater freedom of movement. They both do the job well but with starlock on the Bosch it's a winner in my book.

@macvos 2 жыл бұрын

@@Mymindisablank Ok thanks for the feedback. Was your Fein the old 250 watt model or the newer 350 watt with improved vibration control?

@Mymindisablank 2 жыл бұрын

@@macvos Oh that requires a deep dive into the shed, but I bought it about 12 years ago if that's any help. I'll check......

@macvos 2 жыл бұрын

@@Mymindisablank that'll be the first model, not the newer one that decouples the engine from the casing. Thanks for your response!

@slowcheetah24 2 жыл бұрын

Fein uses the bolt system as well. My Fein multi tool is probably 15 years old and still running strong after hundreds of jobs! Bummer to hear NZ is back on lockdown, looks like you're making the best of it.

@jonegroove 2 жыл бұрын

I really enjoy the quality of the video and the review! Awesome work man!

@dougsaunders8109 2 жыл бұрын

In today’s exciting episode, Jess shows more interest in Burgers than multi tools 😁

@lucasmancini7415 2 жыл бұрын

I have the Milwaukee m18 fuel. I’ve tried the festool but I didn’t like it much and I tried the Bosch but it was loud and had a lot of vibration. Never tried either Makita but I might try the new one when it comes to the US.

@TheBobdelicous 2 жыл бұрын

there is a third makita one that came out in between the ones shown in this video thats a combo of the two

@peytonwarren1936 2 жыл бұрын

Buy the Japanese made on Amazon jp if you can, far better manufacturing process and quality control

@bloodphoenix9928 2 жыл бұрын

Mate that rubber grip is going to be a welcome relief, in the past I've done 3 days of using one to cut up stadium tri board flooring. My hands, forearms were tingly for about a week

@eerlijkmeubel 2 жыл бұрын

The look and reaction of your girlfriend during the explanation about the starlock system is priceless and oh so recognizable

@MeachPango 2 жыл бұрын

im watching this as a 20 year old that still lives at home, just dreaming of owning my own arsenal of 40v makita tools. soon future self......... soon.

@greenreaper1985 2 жыл бұрын

I'm replying to this as a 36 year old who's managed (over many years) to purchase a very full set of Makita 18v and 36v tools just warning you that by the time you do manage to accumulate a full set of 40v tools there will inevitably be an 80v line up released.......the chase never ends

@MeachPango 2 жыл бұрын

@@greenreaper1985 oh its already begun. I have a 40v impact ONLY becaise my dad and I couldn't find an 80v impact, or as I like to call it, the "I wasn't asking" impact 😂.

@MunchyMuncherMan 2 жыл бұрын

I’m watching this as a 20 year old in my own home with an arsenal of ryobi 18v tools checking out the competition

@ashleymalamute 2 жыл бұрын

Brilliant. The Makita is one lost pin away from being a really handy paperweight. They should have just used the same system as the Bosch cordless and put their weight behind one blade type.

@guardianazn 2 жыл бұрын

They can sell replacement pin$.

@Patrick-857 2 жыл бұрын

The system is patented by Bosch/Fein. That's why nobody else has it.

@xenonram 2 жыл бұрын

@@Patrick-857 it's licensed. They could have used the same system the Bosch has, but they wanted to added versatility and add the pin.

@Patrick-857 2 жыл бұрын

@@clearlyconfused9194 I just got the new Makita. I love it so much that I just want to cuddle it. It's my new favourite tool. It's freaking amazing.

@donburke4886 2 жыл бұрын

Your comment is ridiculous.. You are most likely an office worker who "occasionally " picks up a power tool to do something you saw on a television renovation program .

@Camelotsmoon Жыл бұрын

Lol, I love your wife. Probably has no interest herself in any of the discussion, but she looks genuinly happy to just be talking to you about it and listening. The relationship I dream to have with someone where you both have different interests but are just genuinly interested in listening about the other explaining about it because of the love there.

@alanleonard1370 2 жыл бұрын

Thanks Scott. I bought a Makita (Allen key) version a few months ago for DIY. Its good but I seem to be going through the blades. Do you resharpen your blades? Cheers Alan from Australia

@VenturaWorkshop 2 жыл бұрын

I live in the netherlands and here we have an open style blade. This way you can change the blade without having to remove the bold conpletely. This seems way more convenient then the new makita starlock.

@erict7499 2 жыл бұрын

came in here to say this. i have that makita 18v older style but with the lever. for blades with a slot in the "foot" just slide it in without removing the bolt and lock 'er down. but having a starlock max blade for deep cuts sounds nice. also the old makita is loud AF

@ivovantulden3921 2 жыл бұрын

Emile, the starlock system holds the blades better, more force to them, which means faster and powerfull cutting.

@EricTirado 2 жыл бұрын

Kudo's to the wife. It's not something she doesn't seem to be naturally interested in, but she's so sweet trying to pay attention and understand what he's explaining, and why. My wife is just as sweet.

@andrewfraser7351 2 жыл бұрын

This review made my mind up and bought one. Unbelievably good.

@dtbndtbn 2 жыл бұрын

Scott, how long do you work per day/week? Second question - how big is your garage you rent? Or at least include those on next Q&A episode, please :) It would be great if you'd make episode about your work day + week. Sorry if It already exists. I think I've watched all your videos :) Our entire family watches your videos with me. Even my 5yo daughter can properly say your name ;) Greets grom Poland!

@mmaster23 2 жыл бұрын

The entire world is going dark mode on their computer screens Scott: I'll set my desktop background to WHITE

@claussoegaard 2 жыл бұрын

Not sure why, but this comment made me actually bust out laughing

@ImConstantlyDrunk 2 жыл бұрын

Those burgers looked fantastic. I'm just curious, since my experience is with a Dremel multitool originally that had the annoying bolt for the blade retention, and now these days with a DeWalt cordless, which has a simple lever that allows you to quickly change the "normal" style blades in like two seconds but I don't think it will accept a starlock blade, so is there a really good reason to use starlock? Are the blades cheaper, or better or what?

@tykucera 2 жыл бұрын

+1 on this question … hope to hear some advice/thoughts

@benjaminkeus2251 2 жыл бұрын

Oh goodness, it looks EXACLTY like that when im talking about an awesome tool/construction thing. Its mostly me talking to myself how excited I am and my girlfriend just casually eating her lunch without even paying attention to me. 😂😂😂

@bunnedwiener 2 жыл бұрын

I’ve been waiting for a brushless multi tool from Makita and it looks great. Those burgers look great as well.

@wesselschoonderwaldt8896 2 жыл бұрын

fully expected him to cut that burger with the multitool

@Stubones999 2 жыл бұрын

How much does the replacement pin cost? 99% of the multi-tool?

@kshred3043 2 жыл бұрын

As far as I can tell, the post on the Makita enables use of blades with fully enclosing holes as well as potential backwards (and, with the right adaptor, universal) compatibility with older blades and blades from other manufacturers. For example the 'as seen on TV', at least in NZ, Renovator. I could be wrong and more than happy to be corrected. Just starting to try to figure this all out. And this video was most helpful for that. Thanks.

@jamesoliver6625 2 жыл бұрын

My XMT03Z here in the US has had the pin lock mechanism for at least four years. I've never seen one like the one you have there in NZ. The pin lock mimics the way Fein does it. Never seen anyone loose the pin but have seen them get buggered up. We sold them as standard replacement parts at the store i worked at for a while

@MickDuijf 2 жыл бұрын

To bad there are no accesories available like a depth stop or plunge guide for the makita models. like the Festool and the Fein multitools have

@66meikou 2 жыл бұрын

Jess makes a mean burger! I'm hungry now. I'm glad to see the improvements with the Mak tool but I can't help thinking, "what about us 18v users?" Didn't Fein invent the multitool? They seem to have let everyone pass them.

@astriddegroot7438 2 жыл бұрын

Iam still using my fein it's corded and noisy and gives me tingly hands

@xenonram 2 жыл бұрын

@@astriddegroot7438 yeah, those old corded ones suuuuck. The alien/hex screw to hold the blade is the worst. Plus they're so loud.

@sergarlantyrell7847 2 жыл бұрын

That multitool blade that lasted 2 whole renovations is almost as incredible as those burgers looked!

@userbosco 2 жыл бұрын

Great video- I'm no pro, but I do a lot of home projects and own a lot of hand tools. Like you mentioned, I committed years ago to Makita and won't deviate because I now own 1/2 dozen 18V batteries. I've held off on buying a multi-tool because Makita's reviews haven't been awesome. Now will revisit the tool as a potential Christmas gift to myself. Burgers looked killer, need some Sabarac hot sauce, tho! :-]